SPL REPAIR TO BLDG NO SM 59 SINGLE OFFRS ACCN AT THE INF SCHOOL UNDER GE MIS MHOW

Amount

Taking down shuters of any description exc 1 sqm but n.exe 2 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified and as directed.

S&F Second class hard wood plain, solid, straight chawkats and frames, wrought, framed rabated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as directed and specified.

S&F pressed steel door frames of size 105x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified as directed.

S&F pressed steel door frames of size 125x60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified as directed.

S&F 40mm Flush Shutter, solid core construction with block board core and plywood face panel, commercial type on both sides , covered with decorative face veneer/laminates of 5mm thick with lipping / frame at both side to match complete all as specified and as directed.

S&F 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F aluminium 7 mm thick coloured power coated grill of Deco Grill pattern DG 104, fixed to Door/ windows / ventilators including necessary aluminium channels in openings of Door/ windows / ventilators 7 mm thick complete all as specified and directed.

M&L for painting with Duco paint over any type of wooden surface, the surface should be spray painted with approved paint complete all as specified and directed. Make: Berger paints/ Kansai Nerolac/ Nippon Paint as approved by GE.

S&F wood plastic compsite (WPC) wall moulding 20mm thick including all labour and accessories for frame/ornamental design wk & fixing to walls/ceilling & applaying two coat of paint complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick all as specified and as directed.

S&F factory made 25 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cbm, an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free, water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws including necessary Locking arrangement complete all as specified and as directed. Note-:(a) Colour/Texture Style of Door/Prelam Sheet shall be approved by GE (b)Test certificate from original Manufactuer shall be provided before incorporation in the work site.

S&F factory made 100% solid WPC (Wood polymer composite) Door frame 90mm X 45mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/borer proof, water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length, all as per specifications drawings as directed by the Engineer-In-Charge. Note-:(a)Colour/Texture Style of Door/Prelam Sheet shall be approved by GE (b)Test certificate from original Manufactuer shall be provided before incorporation in the work site.

S&F factory made uPVC white colour Sliding window Area not exceeding 2.00 sqm each, Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: (a) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (b) Net Opening will be measured lor payment purpose.

S&F factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: (a) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (b) Glass shall be measured and paid separately.

S&F Stainless steel wire cloth of 0.36mm dia wire and average width of aperture 1.4mm & fixed with tacks of stainless steel wire staples,etc complete all as specified and as directed.

M&L for fabricating coloured powder coated aluminium frame work, door shutter, windows , ventilators, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc including taking down old complete all as specified and directed.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each complete all as specified and as directed.

S&F 100 mm Butt hinges stainless steel complete all as specified and directed.

S&F 150 mm long stainless steel tower bolts of extructed section complete all as specified and directed.

S&F 300 mm long stainless steel tower bolts of extructed section complete all as specified and directed.

S&F stainless steel handles cast type of 150 mm long complete all as specified and directed. .

S&F in repairs 150 mm long floor door stopper of stainless steel body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete all as specified and directed.

S&F in repairs prelaminated particle board 18/19mm thick interior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works as in cupboard shutter / cupboard shelves, pelmet, with and including external teak wood lipping 6mm thick and 18/19mm wide fixed with nails on edges complete all as specified and directed.

S&F in repairs 25 mm dia stainless steel curtain rod with fixing bracket complete all as specified and directed .

S&F brass Mortice lock six livers of size 230mm x 75mm, cylinder 75mm, brass solid body decorative type handles 150mm complete all as specified and as directed.

S&F 300 mm long Extruded stainless steel handles decorative designer type, polished complete all as specified and as directed.

S&F 100 mm long Extruded stainless steel handles decorative designer type, polished complete all as specified and as directed.

S&F 125 mm long Butt hinges of stainless steel with SS hinge pin, bright polished and fixed, typ eB-11 complete all as specified and as directed.

S&F 6mm thick BWR Ply board hardwood feather edged cut as required to cut to shape and fixed complete as in frame work, cupboard, doors, shalves, partition etc with all as specified and directed. Make : Centuary plyboards/ Greenply industries / Kitply industries.

All as per item No 34.00 above but 12mm thick BWR Ply Board complete all as specified and directed.

All as per item No 34.00 above but 18mm thick BWR Ply Board complete all as specified and directed.

All as per item No 34.00 above but 25mm thick BWR Ply Board complete all as specified and directed.

S&F 1mm thick sunmica coloured/design/texure of decorative laminated layer that is placed on top of wood/ply boards with adhessives as per manufactured instructions complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed.

M&L for brick work in CM (1:6) with using flyash brick modular size straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:6) on fair faces of wall/ concrete surfaces finish even and smooth complete all as specified and directed.

M&L for rendering 5mm thick in ceiling CM (1:3) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for three coats of white washing on newly/Old plastered or concrete celling sufaces incuding preparation of surfaces complete all as specified and directed.

M&L for applying two coats of 1st Quality oil emulsion distember over new prepared surface of wall over prepared surfaces of putty complete all as specified and directed. Note:- Putty shall be measured and paid seperately.

M&L for preparation of new plastered surfaces of walls and applying two coats of Acrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over over a coat of primer(@ 2.20 kg/10 sqm) same make base complete all as specified and directed. Note :- The quoted rate shall be inclusive of all necessary scaffolding work and safety devices as required. No additional payment shall be admissible.(b) Each stage i.e preparation of surfaces (complete removal), application of primer, application of first coat and application of second coat shall be passed by Engineer-in-Charge (c) Application of Primer and paint shall be carried out through air-less spray machine (Mechanical means) (d) Written Warranty for four years or as per manufacturer's instructions, whichever is more shall be submitted by contractor.

M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of oil bound distemper make the surface smooth using roller all as specified and prescribed by manufacturer of paint and all as directed at site by Engr-in-Charge Note:- (i) The old surface shall be prepared in such a manner that no dents, impressions, or surface irregularities remain visible. The surface must be made even and smooth in strict accordance with the manufacturer’s instructions before the application of distemper. The cost of all materials, labour, and tools and plants (T&P) required for surface preparation and painting shall be deemed to be included in the quoted rates. (ii) The work shall be executed through an authorised applicator of the manufacturer, after the contractor concludes a Memorandum of Understanding (MoU) with the manufacturer to ensure a company-backed guarantee. The authorised applicator proposed by the contractor shall be approved by the GE/AGE prior to commencement of the work. (iii) All materials required to be incorporated in the work shall be brought to the MES store yard by the contractor. These materials will then be issued by the department for use in the work, to ensure that the quantity consumed is in accordance with the manufacturer’s recommendations. (iv) The work shall be carried out on buildings upto 15.00m height. The quoted rate shall be inclusive of all necessary scaffolding work and safety devices as required. No additional payment shall be admissible (v) The colour and shade of the distemper shall be as approved by the GE/AGE. (vi) Putty shall be measured and paid separately.

M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint (wallmista of Berger paint or equivalent in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint and as directed at site by Engineer-in-Charge. Note:- (i) The old surface shall be prepared in such a manner that no dents, impressions, or surface irregularities remain visible. The surface must be made even and smooth in strict accordance with the manufacturer’s instructions before the application of distemper. The cost of all materials, labour, and tools and plants (T&P) required for surface preparation and painting shall be deemed to be included in the quoted rates. (ii) The work shall be executed through an authorised applicator of the manufacturer, after the contractor concludes a Memorandum of Understanding (MoU) with the manufacturer to ensure a company-backed guarantee. The authorised applicator proposed by the contractor shall be approved by the GE/AGE prior to commencement of the work. (iii) All materials required to be incorporated in the work shall be brought to the MES store yard by the contractor. These materials will then be issued by the department for use in the work, to ensure that the quantity consumed is in accordance with the manufacturer’s recommendations. (iv) The work shall be carried out on buildings upto 15.00m height. The quoted rate shall be inclusive of all necessary scaffolding work and safety devices as required. No additional payment shall be admissible. (v) The colour and shade of the paint shall be as approved by the GE/AGE. (vi) The quoted rate shall be inclusive of all necessary scaffolding work, lifting arrangement and safety devices as required.

M&L for preparation of old decorated surfaces of wall, applying two coat of 1st quality oil emulsion distemper white/coloured of Ist quality over one coat of cement base white wall care based putty (where it is required in Patches) complete all as specified and directed. Note:- Putty shall be measured and paid seperately.

M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No. 51.00 above but on steel surfaces.

M&L for preparation of old decorated surfaces of wall applying two coat of Acrylic Smooth exterior paint of required shade (@ 1.67 ltr/10 sqm) over over a coat of primer(@ 2.20 kg/10 sqm) same make base white cement based putty (where it is required in patches) complete all as specified and directed. Note :- The quoted rate shall be inclusive of all necessary scaffolding work and safety devices as required. No additional payment shall be admissible.(b) Each stage i.e preparation of surfaces (complete removal), application of primer, application of first coat and application of second coat shall be passed by Engineer-in-Charge (c) Application of Primer and paint shall be carried out through air-less spray machine (Mechanical means) (d) Written Warranty for four years or as per manufacturer's instructions, whichever is more shall be submitted by contractor

M&L for preparation of newly/old plaster surface of wall and and apply 2mm thick cement base wall care putty in two coat (each coat not less than 1mm) over a coat of primer on walls and surface finished even and smooth with sand paper complete all as specified and directed.

M&L for preparation of new decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by filling with white cement base putty and applying two coat of 1st quality interior plastic emulsion paint white/coloured all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by filling with white cement base putty and applying two coat of 1st quality interior plastic emulsion paint white/coloured all as specified and directed by Engr-in-Charge.

M&L for preparation & Finishing walls with Royal play textured paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land complete all as specified and as directed .

M&L for PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in sub base, levelling course, etc complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in filling, mass concrete, sub base of floor etc. complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C1, with using 20mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth with using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish of the primeses complete all as specified and directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size not less than 600x600x9 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for scratch free Glazed (Porcelain) Vitrified Tiles (GVT)/ Polished Glazed Vitrified Tiles (PGVT) 9mm to 10mm thick (square or rectangular) area of each tile exceeding 0.42 sqm but not exceeding 0.72 sqm / each tile size 600mmx1200mm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. Make of tile : Superior quality tiles from Kajaria/Somany/Orient Tiles. Note : (a) Size and pattern / texture of GVT (Matt Finish) / PGVT(Glossy Finish) shall be approved by GE (b) Glazed Coating on GVT / PGVTshall not be less than 1mm thick .

All as per item No. 65.00 above but on Skirting, Dado and all verticle surface over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 60mm thick machine pressed rubber moulded precast concrete interlocking paver block (glossy finished) of M-35 grade of approved shape, size and colour conforming to IS 15658-2006 including joints filled with sand over and including stone dust/sand 25m thick as in levelling course of interlocking complete all as specified and as directed.

M&L for 18-20 mm thick Black granite slab of approved quality of any size as approved, bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges as in kitchen platform, window cills & offsets, Door Chowkhats complete all as specified and directed.

S&F in repairs rotational moulded Polyethylene water storage tank 500 liters capacity (cylidrical vertical with closed top) of two layer hoisted and fixed in position complete all as specified in SSR part I complete all as specified and as directed.

All as per item No 71.00 above but capacity 1000 Litres capacity

Taking up or down 15mm steel tubing and connections complete all as specified and as directed.

All as per item No 73.00 above but 20mm bore

S&F 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc. complete all as specified and as directed.

All as per item No 75.00 above but 20mm bore.

Supply and laying 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

All as per item No 77.00 above but 20mm bore.

All as per item No 77.00 above but 25mm bore.

S&F in repairs 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed. Make: Prayag/Cera/Jaquar as approved by GE.

S&F in repairs CP pillar taps cast copper alloy CP with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed. Make:- Cera-Cat No F2013453 / Jaquar KUS-WHT-35913N /Prayag as approved by GE.

S&F in repairs CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed. Make: Prayag/Cera/Jaquar as approved by GE.

S&F in repairs fancy type chromium plated15mm bore two way Bib cock cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and directed. Make: Prayag/Cera/Jaquar as approved by GE.

S&F in repairs CP wall mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed. Make:- Cera Cat No F2013403 / Jaquar FUS-CHR-29273UPR / Prayag as approved by GE.

S&F in repairs 125 mm size chromium plated shower rose with siwel joint and arm not less than 20cm long suitable for 15 mm bore GI pipes complete all as specified and directed. Make: Prayag/Cera/Jaquar as approved by GE.

S&F in repairs CP toilet paper holder complete all as specified and as directed. Make:- Cera Cat No F5004110 / Jaquar CPA-CHR-1153 / Prayag as approved by GE.

S&F in repairs vitreous china wash down water closet pedestal pattern white complete with flushing cistern and flush pipes complete all as specified and as directed. Make:-Cera Cat No S1013246 / Jaquar FNS-WHT-40751P80UFSM2 / Prayag as approved by GE.

S&F in repairs health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. Make:- Cera Cat No F803011DAB / Jaquar ALD-CHR-573 / Prayag as approved by GE.

S&F in repairs vitreous china wash hand basin white including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed. Make:- Cera Cat No S2020177 / Jaquar KUS-WHT-35913N / Prayag as approved by GE.

S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sink complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F in repairs PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long complete all as specified and as directed.

S&F in repairs brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S&F in repairs 15mm bore ball valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed. ( Min Weight 15mm-142 gms) complete all as specified and as directed.

S&F in repairs corner shelf of 300 mm size with ABS brackets complete all as directed and specified.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finish Ceiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.

M&L for complete repair to sunken floor by providing water proofing treatment to sunken floor surfaces of RCC slab by the following specifications as specified and directed :- (a) PCC 1:1.5:3 type A0 with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or Make/Brand as specified in Particular Specification., finish the surface even & smooth without using extra cement. (b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete. on complete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolation of old sunken complete all as specified and as directed. (d) Applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.20 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid seperately.) (e) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. Note : Top Floor Area shall be measured for payment.

Demolition of cement concrete (unreinforced) in roof/terrace other than ground floor etc, including existing roof treatment of any description not exceeding 15cm thickness as directed and specified.

M&L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directe.

M&L for 25mm thick cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof top etc complete all as specified

M&L for water proofing roof treatment with polymeric standard water proofing membrane, Aqua flex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years guarantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.20Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufacturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3 mm thick APP polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed (c) Aluminium bituminous paint @ 0.15 Kg/Sqm shall be applied over the APP membrane surface. Note:- The work of water proofing treatment shall be got executed only through authorised applicator certified by Manufacturer's.

M&L for cement concrete tiles with grey cement and pigments 25cm x 25cm x22 mm thick over and including 15mm thick screed bed in cement mortar 1:6, machine pressed set jointed in neat cement slurry in roof and cut and polished complete all as specified and directed.

S&F PVC Rain water pipes of dia 110mm included fixing with clamp complete all as specified and directed.

S&F repairs PVC (SWR) bends 110mm dia any radius with access door complete all as specified and directed.

S&F PVC (SWR) junction single,(Single T) 110mm dia equal or unequal with access door complete all as specified and directed.

S&F 12mm thick Frosted Toughned Glass fixed on patch hinges/pivot for smooth functioning in door shutter including stainless steel handle of 8 inches long and mortice locking arrangement complete all as specified and as directed

M&L for providing and fixing complete PVC SHEET WALL LOUVERS PANELLING of consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm ( ±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. This wall panaling consisting of PVC insulated panels having wall thickness of 2mm ( ±0.2 ). Make- RAJSHRI or Make/Brand as specified in Particular Specification.

M&L for providing and fixing PVC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm ( ±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement. This wall panaling consisting of PVC insulated panels having wall thickness of 2mm ( ±0.2 ) PVC sheet of Density 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, and the desired thickness of EPS ( Dependent on the Insulation Required ) screwed into the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panel on all four sides of the panel. The PVC Strips of 5mm ( ± 0.25 ) thick PVC Sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panels are joined, so as to cover the screw of both the panels, using solvent cement. 900 heat bent strips of 5mm thick PVC sheets of width 75mm x 75mm feathered at the edges shall be stuck at wall joints / pillars etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. Make- RAJSHRI or Make/Brand as specified in Particular Specification.

S&F 18 mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed.

S&F factory made PVC shelf/partition of required size consisting of panel of 18 mm thick required size consisting of panel of 18 mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/partition to be edge lipped by 18mm widht x 1 mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company , using solvent cement etc. complete all as per specified and directed.

S&F 25mm thick 2nd class Hardwood to Boarding, supplied & fixed with nails in any situation (except flooring and skirting), Planed one side with butt joints complete all as specified and as directed.

M&L for Bees-wax polishing on wood based surface of any description, width or girth including cleaning and preparing the surface complete all as specified and directed

S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.

S&F MS steel Hollow Section work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-4963,1993 and IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming IS-1161-1979 grade ST-240 complete all as specified and as directed.

S&F factory Made 18mm thick 100% Solid CNC CUT WPC (Wood polymer Composite) Plain Jali of required size & approved design, comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm an ISO 9001 - 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge. Make:- Rajshree or equivalent as approved by GE. Note:-(a)Material test certificate and authentication should be compulsory provided by the manufacturing company (b) Used for Kitchen/Balcony Doors, Cabinets, Ceiling, Panelling & interior decoration uses

Taking down copper /aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed fexisting conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBS/TPN DBs/Main Switch including old unserviceable MCCBs/MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including concealed PVC conduit of size 20/25mm ISI marked inclusive of tees bend elbows etc upto and including modular sunken anodised steel box for housing modular switch socket, regulator etc including modular cover plate and cover frame of any module ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finished surfaces with plaster, paint etc complete all as specified and directed by Engr-In-Charge:- (a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on Same board

(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on Independent board.

(e) One bell point controlled by one, bell switch 5 Amps

All as per item No 125.00 above but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point on independent board including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

All as per item No 125.00 above but but using 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB including necessary running of 4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S&F Modular Switch, single pole, one way, and 5/6 Amp single module complete all as specified and directed.

S&F Modular Switch, single pole, one way, and 15/16 Amp single module complete all as specified and directed.

S&F Bell push modular 6 Amps single module complete all as specified and directed.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified and directed.

S&F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified and directed.

S&F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed.

S&F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and directed.

S&F Modular type TV Socket out let complete all as specified and directed.

S&F in repairs LED round light fitting 12W surface mounting type, white light LED or warm light LED 6500K as per site requirment complete with driver duly connection with copper cable etc. complete all as specified and directed. Make. Havells Cat No LHEAAHP7ILW012 /Crompton/ Wipro / Bajaj / Philips as approved by GE

S&F in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two Nos of PVC square boxes including taking down the existing complete all as specified and directed. Make Havells Cat No LHEXBLP7PN1W018 / Bajaj cat Pt No. BCLSB 18WH /Crompton/ Wipro / Philips as approved by GE

S&F in repairs Decorative ultra slim LED light fitting 2 feet 10 watts, 6500K batten aluminium extruded with end caps E complete all as specified and as directed. C Make:- Cat No LHEXACP7IN1W010 of Havells /Crompton/ Wipro / Bajaj / Philips as approved by GE

S&F in repairs Decorative wall mounted luminaire brushed nickel finish fixture with opal glass diffuser made out of E polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 7W watts complete all as specified and as directed. Make:- Havells Cat No LHFOAJE1TZ11060 /Crompton/ Wipro / Bajaj / Philips as approved by GE

S&F in repairs Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer-in-charge Make:-Cat No ENXT P 36L WH CR PC SD of Bajaj /Crompton/ Wipro / Havells / Philips as approved by GE

M&L for Sub main wiring in repairs with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25/32 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Note: Two runs of 6 sqmm cable one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit. Make of cable - Havells / Finolex / RR Kabel Ltd. / L&T Make of PVC Conduit( FRLS) - Presto Plast / Finolex / Jindal / Asian / AKG

S&F PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

S&F in repairs double door VTPN DBs 4 way of powder coated DB's suitable for MCB's fitted with bus E bar, Neutral link, Earth bar and Din ral complete all as specified and directed by Engr-in-Charge.

S&F in repairs double door SPN DBs 08 way of powder coated DB's suitable for MCB's fitted with bus E bar, Neutral link, Earth bar and Din ral complete all as specified and directed by Engr-in-Charge.

S&F in repairs MCCB 100 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs E complete all as specified and directed by Engr-in-Charge.

S&F MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium/copper lugs E complete all as specified and directed by Engr-in-Charge

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size E aluminium/copper lugs complete all as specified and directed by Engr-in-Charge

S&F metal clad box suitable for 230 volt 50 Hz for AC connection three pin and socket with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed.

S&F brushless direct current motor (BLDC) ceiling fans complete with blades(03Nos), suitable length of down rods, with remote control and accessories, 230 V, 50 Hz, 1200 mm sweep, Min air delivery 210 CFM with service value greater than 7.00 BEE. Five star rated, provide electrical connection from ceiling rose to fan terminal by providing flexible cable three core Copper conductor of size 23/0.0076 (3 Core x 0.50 Sqmm), ISI marked and write down MES Number on fan by black paint/Marker complete all as specified and directed by Eng-in-Charge Make: Havells/Orient/Bajaj as approved by GE.

S&F energy efficient exhaust fan of metal body 225/230 mm sweep Ventil Air-DSP green type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windows including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. Note: Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted.

Supply, installation, commissioning and testing of factory made Meter box for Three phase meter 300mm x 300mm x 170mm, made out of IP 66 thermo plastic PS polystyrene weather proof with multi level knock out for cable glands in different sizes at bottom of the box, rain water proof, wall thickness 3 mm including complete internal wiring with 6 sqmm copper wirecomplete all as directed by Engineer-in-Charge. Make: Hensel/L&T/Havells

M&L for Earthing complete (in replacement) with galvanized steel earth plate electrode 60cm x 60cmx 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level) with the top edge of the earth plate not less than 1.50m below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No. 3 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C-1 with 40 mm thick RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.50 m from earth plate is deemed to be included in rate quoted.

sunway associates (BID ID -3388088)

M/s Himgiri construction (BID ID -3388427)

ram prashad chotelal batham (BID ID -3380549)

ss construction (BID ID -3395838)