8291/E8

Amount

Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed by Engr-in-Charge.

Taking down wooden chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down wooden chowkhat with shutter without taking off shutter from frame area n.exc.1.5sqm each complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description n exc 1 Sqm each all as specified and directed .

Taking down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete and removing the debries all as specified and directed.

Taking down PVC door shutter with PVC chowkat with all fittings complete all as specified and as directed.

Cutting holes in brick walls in for inserting hold fasts of GI pipe and making good dismantled portion in cement concrete (1:2:4) type B1exc. half brick but not exc one brick complete all as specified and directed by Engr-in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing and making good, cutting n.exc 10 Cm girth complete all as specified and directed.

Taking up or down steel tubing galvanised of 15 mm bore along with fittings and removing to store or cleaning for refixing all as directed by Engineer-in-Charge

All as per item No.10.00 here-in-before but 20mm bore.

All as per item No.10.00 here-in-before but 25mm bore.

Material and labour Plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) in bed blocks, coping,hold fasts etc; including necessary formwork all as specified and directed.

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan to any radius, built in cement mortar 1:4 as in half brick thick walls complete all as specified and directed.

Supply and fix in repairs 2nd class hard wood plain fillets, square rectangular or traingular in section clean sawn,secured with screws exc 6 Sqcm & n.exc 13 Sqcm all as directed.

Supply and fix in repairs Second class hard wood plain fillets,square, rectangular, or triangular in section clean sawn exc 13 Sq.cm and n.exc 25 Sq. cm secured with nails or brads all as specified and directed.

Material and labour for 2nd class hardwood scantling wrought, as in framed work including dismantling old unserviceable one complete all as specified and directed by the Engr-in-Charge.

Supply & fix Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by the Engr-in-Charge.

Supply and fix 35mm thick 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.24(a) complete all as specified and directed by Engr-in-Charge.

All as per item No.19.00 here in before but divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers

Supply and fix Factory made 35mm thick with 2nd class hard wood, rail and style, plain framed panelled shutter (two panel) with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

Supply and fix 30 mm thick factory made flush shutter, solid core construction with particle board core and plywood face panels commercial type on both side complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair floor door stopper 150mm long of aluminium alloy body and tongue anodised with hard drawn steel spring complete all as directed

Materials and labour Small repair of hinges for door and window, adjustable for sliding door bolts, tower bolts, repair of handles, mortice locks and similar type of works complete all as directed by Engr-in-charge.

Supply and fix Aluminium door with powder coated aluminium anodized standard aluminium sections of medium size and weight not less than 1.50 Kg/RM and conforming to catalogue of Jindal / Hindalco/ Indalco. The door shall be of side hung type fixed at bottom with standard door spring, pintals etc. The bottom panel of the door shall be fitted with 12 mm thick prelaminated particle board decorated on both sides of approved colour and 5.0 mm thick tinted glass in top panel complete including all necessary fittings such as 02 Nos Aluminium anodized handles of approved size and shape, 02 Nos Aluminium anodised tower bolts 200 mm long and 01 No mortice lock per shutter. The shutter frame shall be with one or more rebates including jointing cleats, glazing clips, standard rubber beading including taking down old unserviceable alumium door complete all as specified and directed. Note:- Cost of glazing and particle board shall deemed to be included in the rate quoted by tenderer and floor spring shall be measured and paid separately.

Supply and fix Powder coated aluminum anodized sliding fly proofing window, three tier (two shutter of glass and one shutter on wire mesh) without glazing Bar, Window shutter style shall be 40mm x19mm, sheet thickness 1.5mm, sliding channel 3mm thick. Channel width shall be as required and directed by Engineer-in-Charge with roller. Frame (Chowkat) of window shall be 75 mmx 60mmx 1.5mm thick section with or without rebate with 5.0mm thick tinted glass and galvanized wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm aluminum glazing clips fixed with rubber gasket locking arrangement including taking down old unserviceable aluminium window complete all as directed by Engr-in-Charge. Note:- Cost of glazing and wire mesh shall deemed to be included in the rate quoted by tenderer .

Supply and fix Powder coated aluminium window grills weighing not less than 0.55 Kg/Sqm fixed on aluminium section including necessary jointing, fittings etc including taking down old unserviceable alumium grill all as per manufactures instruction complete all as specified.

Supply & fix Factory made Solid PVC moulded door shutter with particle board core of thickness 28 to 30mm thick ( stile), with 2, 4, 6 raised panel designed with 2mm thick Moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixed in frame at site as per specification and drawing complete all as specified and as directed by the Engr-in-Charge.

Supply and fix Solid PVC door frame ( Chowkat) of size 50mm x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supply and fix in opening as per specification & drg as per manufacturer instructions.

Supply and fix 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

All as per item No.30.00 here-in-before, but 200mm long complete all as directed.

Supply and fix in repair 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

Supply and fix 300mm long Aluminium alloy, anodised, sliding bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alloy complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 300mm long Aluminium alloy, anodised, sliding bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alloy complete all as specified and directed by Engr-in-Charge.

Supply and fix 100mm butt hinges stainless steel medium weight complete all as specified and directed by Engr-in-Charge.

Supply and fix 100mm size butt hinges medium weight cold rolled,mild steel complete all as specified and directed by Engr-in-Charge.

All as per item No.36.00 here-in-before, but 75mm.

Supply and fix in repair 100mm size butt hinges medium weight cold rolled,mild steel complete all as specified and directed by Engr-in-Charge

Supply and fix 100mm long extruded aluminium alloy handles, fabricated type, anodised fixed all as specified and directed.

Supply and fix 150mm long extruded aluminium alloy handles, fabricated type, anodised fixed all as specified and directed.

Supply and fix in repair 150mm long extruded aluminium alloy handles, fabricated type, anodised fixed all as specified and directed.

Supply and fix in repair drawer knobs 20 mm dia of brass polished fixed with nut screw and washer complete all as specified and directed by Engr-in-Charge.

Supply and fixing door closer made up of aluminium die cast body hydraulically regulated for adjustable closing and latching speed (designation No. 2) suitable for door shutters 36 to 60 Kg weight complete all as specified and as directed by Engr-in-Charge. Make: Godrej Cat No. 9363 or equivalent as per list of Approved material.

Supply and fix in repair on wall 25mm dia CP fancy type powder coated drapery rod as per sample and as approved by GE .

Supply and fix in repair 25mm dia CP fancy type powder coated drapery rod bracket as per sample and as approved by GE .

Supply and fix 20mm dia stainless steel pipe as in curtain rod of approved quality with bracket including necessary powder coated holder/ brackets fixed in position etc. complete including taking down old one all as specified and directed by Engr-in-Charge.

Supply and fix in repair stainless steel piano hinges fixed with screws on cupboard / door / window etc completed all as directed.

Supply and fix in repair Magnet catcher for cupboards complete all as specified and directed.

Supply and fix in repair cupboards lock complete all as specified and directed.

Supply and fix in repair stainless steel peg set assembly for 6 hook fixing on door or wall with the help of screws completed all as directed.

Supply & fix in repairs 200 mm ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed by the Engr-in-Charge.

Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Supply and fix in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as directed.

Supply and fix Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Materials and labour for Oiling and greasing of rolling shutter of any size and pattern including scrubbing down old greasing complete all as directed irrespective of width area exc. 8 Sqm and n.exc. 10 Sqm each complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs axle rod of rolling shutter 32mm to 50mm dia MS pipe heavy grade including taking down old one complete all as specified and directed by Engr-in-Charge.

Supply and fix Rolling shutter hood cover 1.00mm thick MS sheet with a coat of red oxide primer (shop coat) of suitable size and shape including taking down old one complete all as specified and directed by Engr-in-Charge.

Supply and fix MS locking plate of standard size and shape from approved quality with a coat of red oxide primer including taking down old one complete all as specified and directed by Engr-in-Charge.

Supply and fix Rolling shutter profile of 1.00mm thick MS sheet with a coat of red oxide primer (shop coat) minimum width of profile 75mm including taking down old one. complete all as specified and directed by Engr-in-Charge.

Supply and fix Spring of rolling shutter of approved quality and size all as directed including taking down old unserviceable one complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair Mild steel tubes 40mm bore Medium Grade with all fittings and fixed complete to walls and ceiling for holding clamps of false ceiling complete all as specefied and as directed by Engr-in-Charge.

Supply and fix in repair 18/19 mm thick pre-laminated particle board as in cup board shutter double leaf one side decorative of sheds and other side balancing white lamination. All edgs properly seald with 5mm thick 2nd class hard beading fixed with water resistant adhesive except rebate side which shall be of 25mm thick as in repair complete all as directed.

All as per Item No. 62 here in before but using 12mm thick plywood complete all as specified and as directed.

Supply and fix 4 mm thick E- board classic designer 595x595mm fixed as in ceiling over aluminium grid suspended with GI hooks 6mm dia and clamp to the following section including taking down old unserviceable one. a) 25 x 25 x 1.5mm(Min thick) aluminium angle . b) 25 x 25 x 1.5mm (Min thick) aluminium cross Tee. c) 25 x 35 x 1.5mm (Min thick) aluminium main Tee complete all as specified and directed by Engr-in-Charge.

Materials and labour 16 mm thick Granite (of any type) work (table rubbed and polished) in Steps, Jambs, Cooking Platform,Dado,Skirting,Floor and like over and including 15mm thick backing course in CM (1:4) including pointing in white cement (1:2) using admixture of pigment to match the shade of granite stone including Cutting, rounded smooth edges and Polishing and taking down old unserviceable granite all as directed by Engineer-in-Charge.

Materials and labour Vitrified Ceramic coloured tiles coloured/ digital 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.18 Sqm but n.exc 0.36 Sqm ( 600mm x600mm x10mm thick) in floor etc,set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:4) including dismantling old unserviceable tiles with screed bed complete all as directed by Engineer-in-Charge.

Materials and labour Vitrified Ceramic tiles light Shade 10mm thick (square/rectangular) polished, area exc 0.18 Sqm but n.exc 0.36 Sqm ( 600mm x600mm x10mm thick) as in Vertical Surface/Dado/Skirting etc set and jointed in neat cement slury and pointed in coloured cement to match over and including 10mm thick backing course in CM 1:4 complete including dismantling old unserviceable tiles with backing course all as directed by Engineer-in-Charge.

Materials and labour Joint free coloured / digital ceramic tiles 7-8mm thick area of each tiles exc 0.11 sqm but n.exc 0.18sqm (400X400X7-8mm),as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incuding 15mm thick screed bedding in CM 1:6.including dismantling old unserviceable tiles with screed bed complete all as specified and directed by Engr-in-Charge.

Materials and labour Coloured / digitalc glazed ceramic tiles in vertical surfaces 450X300X 7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing course in CM 1:4 including dismantling old unserviceable tiles with backing course complete all as specified and directed.

Materials and labour 15 mm thick cement plaster on brick or concrete wall surfaces in cement mortar (1:6) finished top surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Materials and labour 10mm thick cement plaster in cement mortar (1:4) to concrete surfaces as in ceiling/chajja finished even and smooth without using extra cement including necessary scaffolding complete all as directed.

Materials and labour Preparation of new plastered surfaces of wall and applying two coats of Acrylic emusion distemper over a coat of cement primer complete all as specified and directed.

Materials and labour Preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-Charge.

Supply and fix 3mm thick ordinary quality sheet glass and glazing with oil putty in wooden beading in square n.exc. 0.5 Sqm in each pane including hacking out old unserviceable sheet glass from wooden / steel frame complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 5mm thick ordinary quality sheet glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Materials and labour Preparation of new surface of wood or wood based material of any description and in any position not otherwise described over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

All as per item no. 76.00 here in before but not exe 10 Cm width or girth.

Supply and fix in repair 15mm Bib Taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Jaquar Cat part No.CON 037KN or Make:- Prayag cat part No.7306 or Make:- Essco cat Part No.MQT 511 KN

Supply & fix in repair 15mm Pillar Taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. Make : Jaquar Cat part No.CON 011KN or Make:- Prayag cat part No.7202 or Make:- Essco cat Part No.SQT 507 KN

Supply and fix in repair 15mm bore stop cock, fancy type, brass chromium plated, concealed type, screwed down high pressure with crutch or butter fly handle screwed both ends with wall flanged fixed to GI pipe complete all as specified and as directed by the Engr-in-Charge. Make : Jaquar Cat part No.CON 087FTK or Make:- Essco MQT 513AKN or Make:- Prayag cat part No.7328.

Taking out Bib Tap, Pillar Tap, Stop / Angle Cock & Shower Rose etc for carrying out repair work and fixed the same in old position after cleaning, replacing washer, spindle and adjusting screws etc complete all as specified & directed by Engineer-in-charge.

Supply and fix in repairs CP Waste coupling for stainless steel sink complete all as specified and as directed. Make:- Prayag/ Jaquar/ Essco.

Supply and fix in repairs Glass shelf assembly consisting 5.5mm thick sheet glass shelf 10-12 Cm wide with CP bracket guard and railing 60Cm long complete all as directed by Engineer-in-Charge. Make:- Prayag/ Polytuff.

Supply and fix in repairs PTMT, 3" overhead shower rose complete all as specified and as directed. Make:- Prayag cat part No. 1813 or equivalent in Polytuff.

Supply and fix 550x400 size vitreous china wash basin white including 32 mm waste coupling of PTMT (half or full threaded, minimum weight 45 gms), waste pipe low density polyethylene pipe 32mm bore and brackets including taking down old wash hand basin alongwith fittings all as specified. Make :Parryware Cat No. C0406 or equivalent of approved make.

Supply and fix 110mm dia PVC(SWR) rain water pipe fixed on walls, ceilings and floors including GI/PVC clamps, bends, sockets etc complete including taking down unserviceable PVC pipes all as specified and directed by Engr-in-Charge.

Supply and fix in repair PVC pipe with bend 40mm dia on walls, ceilings and floors including GI/PVC clamps complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair chromium plated 80mm dia shower rose for 15 mm bore of pipe complete all as specified and directed. Make: Essco Cat Part No. EOS -541KN for arm or equivalent model from make:- Prayag / Marc.

Supply and fix in repair chromium plated rain shower with shower arm 450mm long fixing with 15mm bore pipe complete all as specified and directed. Make: Jaquar cat part No. OHS 35495 for rain shower and SHA 479L450 for arm or equivalent model from make:- Prayag / Marc.

Supply and fix in repair chromium plated telephone shower with connector pipe and wall hook complete all as specified and directed. Make: Jaquar cat part No. OHS 35495 for rain shower and SHA 479L450 for arm or equivalent model from make:- Prayag / Marc.

Supply and fix in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hosescock, 15 mm dia cast copper alloy chromium plated with round spout right hand knob operating screwed for iron pipe etc. complete all as specified and directed. Make : Jaquar cat part No.CON 169KNB or Prayag cat Part No.7350 or Make:- SQT ESS 516KN.

Supply and fix in repair Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified and directed by Engr-in-Charge. Make- Jaquar cat part No.CON 281 KN or Make:- Prayag Cat part 7375 or Make;- SQT ESS 517KN

Supply and fixing in repair Stainless steel (conforming to AISI-304 grade) kitchen sink of overall size 914mm x 460mm and bowl size 405mm x 354mmx 165mm depth, made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe(heavy duty) 90 cm long, and bedded in cement mortar and fixed on CP cantilever brackets, complete as directed. Make : Prayag / Cera/ Bluestar/ Nirali

Supply and fixing in repair stainless steel kitchen plate rack, made out of 1.00 mm thick sheet for size 31' x 24' x 10' mm fixed on wall with screw,washers complete all as directed. Make: Diamod / Hindustan/ Nirali/ Prayag

Supply and fixing in repair CP hand shower with CP flexible connector pipe & wall hook complete all as directed. Make: Jaquar cat part No. HSH 1737 for hand shower and Flexible tube Model SHA-549D8 or equivalent from Prayag/ Hindware.

Supply and fix as in repair Towel Rail CP with fittings, 600mm long and 20mm dia with brackets at both ends and fixed with chromium plated brass screws and wooden / plastic cleats complete all as directed by Engineer - in - Charge . Make:- Essco cat part No. AEC 111B or equivalent model from make:- Prayag / Jaquar / Marc.

Supply & fix in repair looking mirror bevelled edge, 600 mm x 450mm, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs wih chromium plated brass screws and cup washers complete all as specified and as directed by the Engr-in-Charge.

Supply and fix in repair PVC Cabinet Mirror of size 450 x 350 mm fixed to wooden plugs with chromium plated brass screws and cup washers. including taking down old one complete all as specified and directed by Engr-in-Charge. Make:- Prayag/ Essco.

Supply and fix in repair Vitreous china EWC Casacade type , white including cistern ,seat cover, inlet accessories complete all as specified and as directed by Engr-in-Charge. Make- Cera Capstan model 2068, 2268 & 2368 or equivalent in Parryware/Hindware .

Repairs only Casacade / concealed type flushing cistern including cleaning and replacing of washers, syphone inlet accessories with complete fittings and fixtures complete all as directed by Engineer-in-charge.

Supply and fix in repair Two way bib cock 15 mm bore with flange cast copper alloy chromium plated fancy type screwed for iron pipe brass ferrule etc. complete all as directed. Make Jaquar cat part No.CON-041KN or Make:- Essco Cat part No.SQT 512ANKN

Supply and fix in repair CP soap dish with etc. complete all as specified and directed by Engr-in-Charge. .Make-Jaquar cat part No.ACN-1131N or quivalent make from Marc / Kohelar/ Cera.

Supply and fix in repair PTMT-Pillar Cock Fancy 15 mm (R.H.) borescrewed for iron pipe complete all as specifed and directed by Engineer-in-Charge. Make-Prayag Cat No-142 or equivalent make:- Polytuf.

Supply and fix in repair PTMT soap dish, fixed to plugs with chromium plated brass screws complete all as specified and as directed. Make-Prayag Cat No- 195 or Equivalent from make:- Polytuf.

Supply and fix in repair PTMT grating doom 100mm dia with minimum weight 25 gms complete all as directed by Engineer-in-Charge. Make-Prayag / Polytuf.

Supply and fix in repair CP toilet paper holder, fancy type, chromium plated fixed to walls with chromium plated brass screw complete all as specified and as directed. Make-Jaquar cat part No.ACN-1151N or quivalent make from Marc / Kohelar/ Cera.

Supply and fix as in repair PVC connection, 15 mm dia 600 mm long all as directed by Engineer - in - Charge . Make-Prayag Cat No-324 or equivalent make from Polytuff.

Supply and fix in repair CP connector for hot water supply of size 450 mm fixed to 15 mm GI pipe complete all as directed. Make:- Prayag / Essco/ Jaquar.

Supply and fix in repair PTMT PVC corrugated waste Pipe of size 31 / 32 x 800 mm all as directed by Engineer-in-Charge. Make-Prayag Cat No-3271 or equivalent make from Polytuff.

Supply and fix in repair PVC Seat Cover, Snow White in colour complete all as specified and as directed by the Engr-in-Charge.. Make-CERA /Prayag / Parryware/ Commander.

Supply and fix as in repairs CP towel ring of size 150mm decorative type fixed with walls complete all as directed by Engineer - in - Charge . Make:- Essco / Prayag / Jaquar / Marc.

Supply and fix as in repair Corner Glass shelf assembly with chromium plated bracket guard and railing complete all as specified and directed. Make - Prayag Cat Part No- BEA 46 or Equivalent of Essco/Parryware as approved.

Supply and fix in replacement 10 Litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, fixed in repairs complete all as specified and directed. Make :SLEEK of Hindware or equivalent of approved make.

Repair only to flushing cistern including cleaning and replacement of washer and syphonage of suitable size if required complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement vitreous China wash down water closet pan (pedestal pattern), white, with ‘P’ or ‘S’ trap, front or back inlet, including fixing bolts, PVC seat cover and mild steel chromium plated hinging device and all necessary connections. Make : Hindware Cat No. 11003 or equivalent of approved make..

Supply and fix tubes 15mm bore medium grade galvanized with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed by Engr-in-Charge.

All as per item No.116.00 here-in-before but 20mm bore.

All as per item No.116.00 here-in-before but 25mm bore.

Refixing old steel tubing 15mm bore and connection in new or old position with new fittings (wall, ceiling, floor etc.) complete all as specified and directed by Engr-in-Charge.

All as per item No.119.00 here-in-before but 20mm bore.

All as per item No.119.00 here-in-before but 25mm bore.

Supply, fixing & hoisting in position Rotational moulded polyethylene water storage tank, 1000 litres capacity, ISI marked multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including dismantling of old tank complete all as specified and as directed . Make of Water Tank : SINTEX/POLYCON

Supply, fixing & hoisting in position Rotational moulded polyethylene water storage tank, 2000 litres capacity, ISI marked multi layer construction (cylindrical vertical with closed top), hoisted & fixed in position including dismantling of old tank complete all as specified and as directed . Make of Water Tank : SINTEX/POLYCON

Disconnecting existing water tank of capacity exc 250 litres & n.exc 500 litres, reconnecting and refixing in position including cleaning and removing all scale and dirt, etc from tank and from mouth of circulating pipes, etc including writing letters/figures boldly & solidly “TANK CLEANED ON ________ (Date of Cleaning )” with two coats of synthetic enamel paint (1st grade quality) of height of letter 5 Cm & width 2.5 Cm with oblitering the old one complete all as specified and as directed by the Engr-in-Charge.

All as per item 124.00 here-in-before but capacity of tank exc 500 litres and n.exc 1000 litres

All as per item 124.00 here-in-before but capacity of tank exc 1000 litres and n.exc 2000 litres.

Supply and fix in repair 15mm bore Stop valves of PTMT any colour high pressure screwed for iron pipe or to CPVC pipe complete all as specified and directed. Make : Prayag Cat No 141/142 or equivalent approved product of POLYTUF.

Supply and Fix in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe of 25mm bore dia (Minimum weight 455 gms) complete all as specified and as directed. Make:- Prayag/ Polytuff.

Supply and fix in repair shelf 450mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats(minimum weight 300 gm) complete all as specified and directed by Engr-in-Charge. Make-Prayag / Polytuf

Supply & Fix in repair Bib tap standard of PTMT of any colour, screwed for 15mm bore GI pipe of having minimum weight 90 gms complete. Make : PRAYAG Cat No-121 or equivalent approved product of POLYTUF.

Supply & fix in repair 600 mm long brass chromium plated, tubular towel rack with lower hanger complete all as specified and directed. Make: ESSCO Cat Part No.AEC 1180A or equivalent model from make:_ Jaquar / Paryag.

Supply & fix in repair health faucet with CP flexible cord fixed on wall complete all as specified and directed by Engr-in-Charge. Make:PRAYAG Cat Part No.BEA 86 or Equivalent model from make:- Jaquar / Essco.

Supply & fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-Charge. Make:Godrej / Hardwin/ Doorset.

BHASKAR SUPPLY AGENCY

UNIVERSAL TRADING CENTRE