CERTAIN BR REPAIR TO ROOF CEILING WALL JOINERY AND SANITARY FITTINGS OF TB OTM ACCOMMODATION AT OLD NAVY NAGAR UNDER AGE BR I OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) n. exc 1.5 sqm

Taking down chowkhats or frames but with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 Sqm each

S & F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing

Cutting holes in brick walls but in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete in 1:2:4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts

M & L MS works in holdfast made of fe -290 of length

S & F Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm length.

S & F Aluminium handles, cast type, anodised of length 150 mm

S&F 100mm size stainless steel medium weight butt hinges all as specified.

Taking down cement or cement lime plaster on brick or stone walls of any description including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately)

M & L preparation of new undecorated surfaces of walls, soffits & fascias of chajjas etc and applying two coats of weather proof Acrylic based paint (100 % Acrylic) exterior grade over a coat of primer all as specified and directed by Engineer-in-Charge. (Note:- The rats shall be include scaffolding and safety equipment upto 30 mtr height)

M&L udaipur White marble/Green marble slab 18-20 mm thick over vertical surfaces of wall, columns pillars and lintel soffits & floor etc and similar work machine cut, bedded and jointed with grey cement slurry over and including 10 mm thick screed bed in cement mortar 1:3 and pointed with white cement using marble dust with admixture of pigment to match the shade of marble slab including grinding , polishing and rounding the edges complete (Note : The rates included the cost of cement screed bed 10 mm thick)

M & L in repairs for anodised aluminium snap grid frame work for false ceiling with and including 4 mm thick Non asbestoes cement building boards (size of grid 605mmx605mm) including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete .

S & F in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102

S&F 5.5 mm thick repairs frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame.

M & L applying one coat of oil emulsion distemper white or tinted on wall after necessary preparation of surface including of swelled popup paint, crack and applying wall care putty to make the surface even including crack filling complete all as specified.

S & F in repairs Aluminium alloy wire cloth,0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed withaluminium wire staples.

M & L preparation of old undecorated surfaces of walls, soffits & fascias of chajjas etc and applying one coats of weather proof Acrylic based paint (100 % Acrylic) exterior grade over a coat of primer including crack filling complete all as per manufacturers instruction all as specified & directed by Engineer-in-Charge.

Supply & fix Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop at of primer erected in position as indicated complete push pull or manual type thickness of lath is 1.25mm including taking down old shutters complete all as specified and directed.

Taking down and refixing of steel rolling shutters after carryout necessary repair greasing,top cover, anchoring rod, hasp and staple and erected in position as indicated, complete all as specified and directed

M & L for providing and fixing two tyre Gypsum Board false ceiling of 12 thick fxed with screws as per manufacturer's instructions including S &F GI frame work for seamlesss ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entreintermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. GL. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI. flat 40 x3 mm size 60mm long and expansion |hold fasteners12,5mm dia. 40mm long complete all as specified.

Supply and fix for 12 mm thick ply wood asian vertical surface as wall pannelling with wooden planks of size 50 mm x 50 mm of second class hard wood having spacing of 600 mm C/C and fixed to wall with nails and finish the surfae with two coats of varnish polish including a coat of primer complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty (150 Kg load capacity) and fixed including taking down old u/s one complete all as specified and directed

M & L for one coat of floor paint (Indigo or Equivalent) on old surfaces of chequered tiles/paver blocks in floor including brooming and cleaing the surfaces with water complete all as directed.

Supply & fixing 3mm thick Aluminium composite panel cladding plain of approved colour/shade to facia of slab/beam/column/slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, with and including aluminium square tubular hollow section 25 x 25 mm not exceeding 900 mm c/c on MS pipe purline/rafter/column beam/slab to hold ACP cladding etc including takingdown old unserviceble aluminium composite panel. (Note : Colour / Pattern of ACP sheet shall be as approved by GE) complete all as specified and directed by Engineer-In-Charge

S&F toughen glass 12 mm thick as in door shutter inlcuding necessary SS hinges complete all as directed including taking down old u/s glass.

S&F Solar control film 50 micron reflective type (glareware sun control or equivalent) including taking down old U/S film complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

S & F Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) size 400x 400 mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)

S & F Non Skid rectified ceramic floor tiles 8 to 9 mm thick of size 600x 600 mm as in floors etc approved colour set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : (i) The rate includes the cost of cement screed bed)

S&F Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 10mm thick backing layer in CM 1:4.as specified and directed.

Material & labour for glazed ceramic tiles in vertical surface 300x450x7 to 8 mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In-Charge

Dismantling stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 etc complete.

M&L for Sand filling under floors or in foundation including watering and consolidation etc complete.

M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)

M&L machine cut pre-polished kota stone slab in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement plaster )

Demolition of lime Concrete of any description and in any position not otherwise specifically provided for including china mosaic & wc

M&L for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors. (Note : WPC shall be measured and paid seperately)

M&L cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor all as specified and directed.

Supply only water proofing compound of ISI make.

S & F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe ) including trap set in and including concrete including provision of lime concrete bedding

S &F in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4)

Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia all as specified and as directed. ( Inclusive of scaffolding of any height)

S & F CI soil/ waste/ vent pipe s in any length with ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed

S & F CI soil/ waste/ vent pipe s in any length with ears 75 mm bore ISI marked (sand cast) in any length with cement joints fixed to walls complete all as specified and directed

S & F CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminshing pieces or tapers on walls complete all as specified.

S & F CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) wirh parallel branches for 100mm bore pipe all as specified and directed

Taking out shrubs/vegetation growth from building at any height and at any location with root and applying a glyphosat pesticide or any other equivalent pesticide in a ratio of 1:50 with water on roots including taking down cement plaster not exc 0.50 sqm for each tree and making good surface by plastering the same area with 20 mm thick plastering in cement mortar 1:4 and finishing the surface to match existing surface with necessary scaffolding and other required T&P all as specified and as directed.

Cleaning existing drainage / culverts of any depth including removing cover slabs/grill , soils , spoils , vegetation , silt etc and refixing/placing of removed cover slabs/grill including making good in cement mortar 1: 3 and removing material outside the MD land complete all as directed and specified.

Dismantling of Plain or corrugated FRP /Steel chajja any Guage thickness including all fittings complete all as directed by Engr In Charge

S & F Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

All as per item No. 53 here-in –before but except sheeting( any thickness).

Demolition of brick or stone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified .

M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete

M & L brickwork with subclass ‘B’ bricks (old size), straight or curved on plan exc 6m mean radius built in cement mortar 1:4

Dismantling wrough iron or mild steel work of any description not otherwise provided for embedded in PCC /Brick work all as specified and directed.

M & L Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 all as specified and directed.

Mild steel work as in flange and tubular mild Steel incl cutting top shape as directed bent to shape drilling holes, hotching for wire etc complete confirming to FE-410-0 or 310-0

M&L applying External Texturel painting work as under:-

(a) Providing & applying External Texture Bauble Spray.

(b) Providing and applying two coats of Apex Ultima over a coat of primer complete including complete removal of existing treatment washing all as directed. ( Note : Colour as approved by GE)

M & L 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.(Note: Sample as approved by GE)

Material and labour for stainless steel special alloy grade 304 pipes as in railing including required cutting, notching Argon welding, riding and drilling counter sunk holes and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and polishing Complete all as specified and as directed by Engr-in-Charge (upto 08 storey ht of bldg).

S&F Diving board of 2.00 mtr long, F.R.P laminated with 99.7% water resistant polyester resin compositely reinforced with csm-450 chopped glass strand mat. Moulded with anti slippery top laminated with wr-300 mat. Thickness 2.5"-1.5" width 20" with MS Fulcrum (standard roller & stand).

S&F Diving board 4.80 mtr F.R.P laminated with 99.7% water resistant polyester resin compositely reinforced with csm-450 chopped glass strand mat. Moulded with anti slippery top laminated with wr-300 mat. Thickness 2.5"-1.5" width 20" with MS Fulcrum (standard roller & stand).

Taking down and removing the existing plaster, tile and adhesive by chipping and grinding the surface washing complete removing debries outside of MoD land complete all as directed.

M&L Rakingout Joints & cracks by grinder ( 5mm deep grove) and seal with cementitious material all as per manufacturer instructions complete all as directed.

M&L epoxy injection, grouting to the pool shell with 145 PSI pressure machine all as per manufacturer instructions complete all as directed.

Acrylic Polymer coat : M&L Providing and applying one coat of acrylic polymer elasto-meric water proofing membrane to the pool shell to counteract crack formation devloped by varring water load on the pool shell internally ( internal treatment) all as per manufacturer instructions complete all as directed.

M&L sprinkling the acrylic modified chatt dabba plaster over the same with perma latex additive in CM 1:3 (5mm) for adhesion to receive plaster(internal treatment) all as per manufacturer instructions complete all as directed.

Polymer modified Plastering: M&L Providing & Applying the waterproofing plaster 10 mm thick to the pool shell including waterproofing compound in 1:4 line, level internally and externally etc with neat cement finish, curing etc ( internal treatment) all as per manufacturer instructions complete all as directed.

Polymer modified Screed Coba : M&L Providing & Applying Polymer modified Screed coba in CM 1:4 to the Bottom of pool with aggregate sandwiched in base coat 20mm to 30mm and final coat 10-15mm in line, level etc with neat cement ( internal treatment) all as per manufacturer instructions complete all as directed.

Glass Mosaic Tile: Supplying and fixing glass mosaic tile of approved colour and approved design on white tile adhesive and filling the joints with white polymer tile grout.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madefrom roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in?Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour lowered glazed ventilator with fly proof made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

IDEAL CONSTRUCTION COMPANY

M/s. MAYUR ENTERPRISES

SATYANARAYAN CONSTRUCTION

S S ENTERPRISES

BOB ENTERPRISES

ORIENT ELECTRIC CO

SHREE JAGDISH FURNITURE CO.