Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹20.4 LAdmitted-Finance | -27.86% | ₹20.4 L | L1 | Admitted-Finance |
| 2 | L2₹22.3 L+₹1.9 L (9.22%)Admitted-Finance | -21.21% | ₹22.3 L+₹1.9 L (9.22%) | L2 | Admitted-Finance |
| 3 | L3₹26.1 L+₹5.7 L (28.2%)Admitted-Finance | -7.55% | ₹26.1 L+₹5.7 L (28.2%) | L3 | Admitted-Finance |
Tender Value
₹28.3 L
EMD Value
₹56,560
Closing Date
10 Jun 2026, 6:00 pmClosed
EXECUTIVE ENGINEER PWD CONST DN JAIPUR
EXECUTIVE ENGINEER PWD CONST DN JAIPUR
Misc. works in Newly Constructed IAS Flats in Gandhi Nagar, Jaipur. (Prevent hot water from tape and Covering Jogging track)
2026_CEPWD_564465_2
ST NIT 06/2026-27 EE PWD CONST DN JAIPUR
Open Tender
Miscellaneous Works
Percentage
45 days
JAIPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
EE PWD CONST DN JAIPUR/ MD RISL BY EGRASS
₹56,560
Yes
12 Jun 2026
3 Jun 2026
11 Jun 2026
3 Jun 2026
10 Jun 2026
3 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jalore (P-white / S-white/ Rosy Pink colour) Above 3601 Cm2 Slabs | 10 | P.Sqm | 2,750 | ₹27,500 |
| 2 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite/Kota Stone Work Half Edge moulding | 20 | P.Rmt | 143 | ₹2,860 |
| 3Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). | |||||
| 3.01 | For fixed portion Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 100 | P.Kg | 351 | ₹35,100 |
| 3.02 | For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Powder coating aluminum ( minimum thickness of powder coating 50 micron) | 50 | P.Kg | 381 | ₹19,050 |
| 4 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness ( weight not less than 13.50 kg/sqm) | 2 | P.Sqm | 902 | ₹1,804 |
| 5 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides. | 2 | P.Sqm | 1,092 | ₹2,184 |
| 6 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium section (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | 1 | P.Sqm | 1,775 | ₹1,775 |
| 7 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes. | 12,700 | P.Kg | 100 | ₹12,70,000 |
| 8 | Providing and installation of Poly Carbonate Sheet roofing over existing steel framing as per drawing and design including fixing with non-corrodible nuts and water proof washers as per instruction of Engineer-in-charge. 6 mm thick | 750 | P.Sqm | 1,447 | ₹10,85,250 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.44 MB
Tendernotice_2.pdf
PDF • 3.23 MB
TENDERDOCS6_2.pdf
Tender Documents • 6.17 MB
BOQ_1004614.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .