REPAIR/MAINT OF JOINERY, FLOORING, FALSE CEILING, PAINTING AND CERTAIN MISC B/R WORKS TO OFFRS MD ACCN INSIDE FORT WILLIAM AND REPAIR/REPLACEMENT TO INTERNAL WATER CONNECTION, PLUMBING WORK, CLEANING/REPAIR OF OVERHEAD TANKS UNDER GE (FW) KOLKATA

Amount

Taking down cement plaster on brick or concrete surfaces incl racking out joints, hacking for key, scrubbing down with water etc. all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as directed.

Taking down shutters of any description area not exceeding 1.00 sqm each and removing from the site complete all as directed.

Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 sqm each and removing from the site complete all as directed.

Hacking out old broken glass (any thickness, size, quality or description), from metal frames incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones as directed.

Dismantling unframed timber scantling 40 Sqcm and over in section, in any position all as specified and directed.

M&L for applying one coat of white wash to old decorated (white washed) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for applying one coat of white wash to old decorated (white washed) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for applying one coat of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for applying two coats of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 2mm thick water proof wall care putty complete all as directed. (Make of Waterproof Wall Putty : BERGER, Home shield or equivalent product in JK / BIRLA / ASIAN / NEROLAC)

M&L for applying one coat of oil bound distemper to old decorated (distempered) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for applying two coats of oil bound distemper to old decorated (distempered) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for applying one coat of cement base paint to old decorated (cement base painted) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted brick, stone, concrete, asbestos cement or plastered surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed.

M&L for applying one coat of varnishing on old treated wooden surfaces of any description over 10 cm width or girth including cleaning and preparation all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed.

M&L for 10 mm thick rendering in cement mortar (1:4) to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement all as specified and directed.

M & L in repair decorative cement concrete tiles of size 300mm x 300mm x 18 to 20mm thick as in floor, laid over and including 20mm thick screed bed in cement mortar (1:6), set and jointed and neat cement slurry and pointed in white cement with admixture of pigment to match the shade all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied over 2 mm thick plaster of Paris complete all as specified and directed.

S&F in repairs 35mm thick precast cement concreate (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) louvers and jallies including all moulding, set in cement mortar 1:4 all as directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/Paving etc, finished even and smooth without using extra cement complete all as specified and as directed.

M & L Cleaning of floor with water & polishing with wax polish as per manufacturer's instruction complete all as specified and directed. (Make of Wax Polish: Mansion or equivalent make as approved by GE)

M & L for brick work using old size sub class 'B' fly-ash bricks straight or curved on plan exec 6 metre mean radius, built in cement mortar 1:6 all as specified and directed.

M & L brick work using old size sub class 'B' fly-ash bricks straight or curved on plan to any radius in half brick wall, built in cement mortar 1:4 all as specified and directed.

M&L TMT steel bars 6-8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

S&F in repair Aluminium body (extruded section) door closer hydraulically regulated, designation No 3 , universal type suitable for door shutters of 851 to 1000 mmm in width and weight between 61 to 80 kg as specified and directed. (Make : Godrej, Cat No: 1938 or equivalent model in other makes specified in tender).

S&F in repairs Chromium Plated 25mm dia brass chromium plated curtain rod, fixed with brackets, stops, rollers etc as directed by Engr-in-Charge. (NOTE: Brackets will be measured and paid seperately)

S&F in repairs fancy type metal finish curtain bracket fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F as in repair Aluminium door frame and openable shutter, windows and partitions and ventilators with one or more rebates including jointing cleat for fixing etc, complete all as specified and as directed.

Supply and fixing 4.8 mm thick sheet glass frosted on one side, area in squares exc 0.5 sqm in each pane and glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed. (Note: Rubber gasket will be measured and paid seperately)

Supply and fixing 5 mm thick sheet glass frosted on one side, area in squares not exc 0.5 sqm in each pane and glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed. (Note: Rubber gasket will be measured and paid seperately)

Supply only Rubber gasket of aluminium door, window and partition wall for fixing glass panes or prelaminated particle board etc complete all as specifed and as directed.

S&F in repair rubber gasket of size 50mm X 6mm sutaible for air sealings of aluminium/wooden door, window etc. complete all as specified and directed

Supply and fixing 2nd class hard wood (sal) plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick complete all as specified and directed.

M&L mild steel work as in holdfast made out of flat iron any size including necessary welding or fixing nuts and bolts complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 sqm but n. exc 0.5 sqm each complete all as specified and directed.

-ditto- but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 sqm each

S&F Factory made 35mm thick with 2nd class hard wood, rail and style factory made plain framed panelled shutter(two panel) with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick Factory made 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to receive glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as specified and directed.

S&F 35 mm thick Factory made 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to receive glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as specified and directed.

S&F stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply & fixing 100mm mild steel butt hinges (medium weight) cold rolled complete all as specified and directed.

Supply & fixing 75mm stainless steel butt hinges (medium weight) cold rolled complete all as specified and directed.

Supply & fixing 150 mm size aluminium anodised barrel tower bolts of extruded section (ISI marked) all complete all as specified and directed.

Supply & fixing extruded aluminium alloy handle fabricated type anodised 100 mm size (ISI marked) complete all as specified and directed.

S&F 150mm long aluminium anodised handles (fabricated type) ISI marked complete all as specified and directed.

S&F 200mm long aluminium anodised tower bolts extruded section, ISI marked complete all as specified and directed.

S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed.

S&F 3mm thick plain sheet glass ordinery quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 4.8mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

M & L in repairs 0.9mm thick decorative laminate type-1 of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed.

S&F mortice lock in repairs vertical type 100mm dia size 6 levers complete all as specified and directed.

S&F in repairs coat hooks, solid body 175mm (six points) to 250mm of aluminium body and fixed complete all as specified and directed.

S&F in repairs brass hat and coat hooks, solid body, 175mm to 250mm complete all as specified and directed.

S&F in repairs 35-40mm dia brass polished knobs complete all as specified and directed.

M&L in repair CP brass brackets for receive 5mm to 8mm thick glass as in shelves complete all as specified and directed.

S&F 40mm dia cup board knobs, fancy type all as specified and directed by Engineer-in-Charge.

S&F 75mm long brass tower bolt complete all as specified and directed by Engr-in-Charge.

S & F in repairs 450 mm long brass steel skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt complete all as specified and directed.

S & F in repairs 600 mm long brass steel skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt complete all as specified and directed.

S & F in repairs 250 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fiing bolt with rolled or drawn brass bolts complete all as specified and directed.

S & F in repairs 300 mm long brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fiing bolt with rolled or drawn brass bolts complete all as specified and directed.

S & F 2nd class hard wood timber clean sawn and fixed as in framed scantling over 40 Sqcm in section complete all as specified and directed.

Material and Labour for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil, complete all as specified and directed

S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section,wrought , cross sectional area exc 6 Sq cm but n exc 13 Sq cm, secured with nails including two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 2nd class hard wood plain fillets, square or rectangular or triangular in section,wrought , cross sectional area exc 3 Sq cm but n exc 6 Sq cm,secured with nails including two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair 12mm thick plywood grade BWR type B-B fixed with screws to timber frame works complete all as specified and directed.

S&F in repair 6mm thick plywood grade BWR type B-B fixed with screws to timber frame works complete all as specified and directed.

S&F in repair 19mm thick commercial faced plywood grade BWR type B-B fixed with screws to timber frame work as in pelmet boxes, cup board etc complete all as specified and directed.

S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap as in roof, wall fixed with L-type or J- type or crancked hook bolts in lieu screw complete all as specified and directed.

Dismantling of floor hearth, wall tiling incl cement mortar bedding (but not backing) removing of serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non Skid joint free ceramic coloured tiles 7-8mm thick, area of each tiles exc 0.11 sqm but n.exc 0.18sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed.

-ditto- but coloured non-skid ceramic tiles, with area of each tile exc 0.06 sqm but n.exc 0.11 sqm

M&L Non Skid joint free ceramic coloured tiles 7-8mm thick, area of each tiles exc 0.06 Sqm but n. exc 0.11 sqm, in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick screed bedding in cement mortar 1:4 complete all as specified and directed.

-ditto- but coloured non-skid ceramic tiles, with area of each tile exc 0.06 sqm but n.exc 0.11 sqm

M&L coloured glazed ceramic tiles in vertical surfaces of size 450X300X7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick cement plaster in cement mortar 1:4 complete all as specified and directed.

-ditto- but coloured glazed ceramic tiles of size 300 mm X 200 mm X 7-8 mm thick

M&L for 40mm thick PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in floor finished even and rough for receiving top layers complete all as a specified and as directed.

S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 or equivalent model in JAQUAR / CERA / HINDWARE)

S&F in repair solid seat and cover, white, for pedestal pattern water closet complete all as specified and directed.

-ditto- but coloured seat cover for pedestal pattern water closet

Supply and Fixing in repairs, Tubular towel rail (premium quality), 20mm dia, D type, 600 mm long between flanges including brass chromium plated, complete all as specified and directed. (MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 or equivalent model in KOHLER / MARC / CRABTREE/ HINDWARE)

S&F 15mm bore chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030401AB or equivalent model in KOHLER / MARC / CRABTREE / HINDWARE)

S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: T-112 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 or equivalent model in HINDWARE)

S&F 15mm bore chromium plated two way bib cock with flange, fancy type as directed. (Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9212 or equivalent model in HINDWARE)

S&F Chromium plated brass Bib cock with wall flange, fancy type fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: C-202B / JAQUAR, Cat No: CON-047KN/ PARRYWARE, Cat No: G1404A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9206 or equivalent model in HINDWARE)

S&F Chromium plated brass Bib cock with wall flange, fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: C-209 / JAQUAR, Cat No: CON-107KN/ PARRYWARE, Cat No: G1405A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9208 or equivalent model in HINDWARE)

Supply and fixing, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE : JAQUAR, Cat No: CON-083FTK / PARRYWARE, Cat No : G1461A1 / ESS ESS, Cat No: T-108 / CERA, Model: OCEAN / PRAYAG, cat No: 9218 or equivalent model in HINDWARE)

S&F Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : Ess Ess, Cat No: C-201B / JAQUAR, Cat No: CON-021KN/ PARRYWARE, Cat No: G1402A1 / PRAYAG, Cat No: 9204 or equivalent model in KOHLER / MARC / CRABTREE / HINDWARE)

S&F 15mm bore chromium plated central hole basin mixer (premium quality) without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed. (MAKE : ESS ESS, Cat No : T-118 / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 or equivalent model in HINDWARE)

S&F 110mm dia CP grating fixed in repair complete all as specified and directed.

S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 or equivalent or equivalent model in HINDWARE).

S&F in repairs 15mm dia toilet paper holder, recessed type, with chromium plated bars incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : AHS 1551 / ESS ESS, Cat No: AC-506C or equivalent model in CERA / PARRYWARE / HINDWARE)

S&F in repairs chromium plated brass jet spray with one metre PVC tube including taking existing jet spray complete all as specified and as directed . (Make : Essco, Cat No ALE-547/PRAYAG, Cat No: BEA-17 or equivalent model in GEM / PARKO / LAURET / AQUEL)

Supply and fixing in repair chromium plated tumbler holder with glass tumbler & wall flange complete all as specified and directed. (Make : JAQUAR, Cat No: ACN-1141N /ESS ESS, Cat No: AC-504 / PRAYAG, Cat No: BA-26G or equivalent model in PARRRYWARE / CERA / HINDWARE).

S&F in repairs 15mm dia soap dish chromium plated complete all as specified and directed. (Make : Jaquar, Cat No : AKP-35731P / PARRYWARE, Cat No: T6403A1 / ESS ESS, Cat No: AC-103 / PRAYAG, Cat No: BA-35 or equivalent model in CERA /HINDWARE)

S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern) coloured including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC coloured seat cover and connecting fittings including taking down existing water closet complete all as specified and directed. (Make : PARRYWARE, Model : Cascade NXT / CERA, Model : CLAIR / HINDWARE, Model: CONSTELLATION or equivalent model in JAQUAR)

S&F in repairs vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)

S&F in repair Vitreous china, coloured half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern and waste pipe) incl providing and fixed plugs, bedding urinal against wall in cement mortar 1:2 and securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement including 32mm CP bottle trap, CP connecting pipe and CP urinal spreader including taking down existing urinal complete all as specified and directed. (Make of Urinal : Parryware Cat No: C-0575/ Jaquar, Cat No: URS-WHT-13261 / CERA, Cat No: S4020102 / HINDWARE, Cat No: 60030) (Make of Bottle Trap: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C or equivalent model in PARRYWARE/PRAYAG/ HINDWARE). (Make of Urinal Spreader : CERA, Cat No: F8070201 / PRAYAG, Cat No: BEA-25 or equivalent model in PARRYWARE / HINDWARE / JAQUAR)

Supply and Fix in repairs vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 / CERA, Model: COVY)

S&F in repair Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe, flushing cistern and waste pipe) incl providing and fixed plugs, bedding urinal against wall in cement mortar 1:2 and securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement; fixing flushing cistern with brackets, flush pipe, grating and union for discharge pipe and provinding and fixing chromium plated urinal spreader including taking down existing urinal complete all as specified and directed. (Make of Urinal : Parryware, Cat No. C-0575/ Jaquar, Cat No: URS-WHT-13261 / CERA, Model: CAPRIANA / HINDWARE, Cat No: 60002) (Make of Urinal Spreader : CERA, Cat No: F8070201 / PRAYAG, Cat No: BEA-25 or equivalent model as approved by GE)

S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and as directed. (MAKE : PARRYWARE, Cat No. C0406 / HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141)

S&F in repair vitreous china, coloured, counter top wash hand basin including providing 32 mm dia chromium plated bottle trap, 32 mm dia chromium plated waste coupling, and making all necessary connections including taking down existing basin complete all as specified and directed. (Make of Basin: CERA, Cat No: S2030103 / Parryware, Cat No: C0431 / HINDWARE, Cat No: 10017 or equivalent model in JAQUAR) (Make of Bottle Trap: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C or equivalent model in PARRYWARE/PRAYAG/HINDWARE).

Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 or equivalent model in SHAKTI / JEXON)

-ditto- all as per Item No. 80 here in before but 600mm long. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON)

S&F PVC waste pipe 32mm dia for WHB/kitchen sink fixed complete all as specified and directed.

S&F in repair PVC waste pipe 40 mm dia for WHB/kitchen sink fixed complete all as specified and directed.

S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

S&F in repair PVC flush bend, 32 mm bore, suitable for low level cistern complete all as specified and directed. (Make: RELIANCE or equivalent make as approved by GE)

S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete including taking down existing sink complete all as specified and directed. (MAKE : PRAYAG, Cat No. 1239-D or equivalent model in NIRALI / DIAMOND / ANJALI / JAYNA / BLUE STAR / CERA / PARRYWARE)

S&F in repair 15mm bore chromium plated sink cock, premium quality, swivel casted spout (wall mounted model) as directed (Make : JAQUAR, Cat No: CON-357KN / ESS ESS, Cat No; C-259 / PARRYWARE, Cat No: G1421A1 / PRAYAG, Cat No: 9216 / or equivalent model in CERA / HINDWARE)

S&F in repair Stainless steel kitchen rack of size 31" x 24" x 10" fixed in wall with screws and washer including taking down existing rack complete all as specified and directed. (MAKE : PRAYAG, Cat No : P-340 or equivalent model in SUYOG / BLUE STAR / ANUPAM INDUSTRIES)

S&F chromium plated brass corner glass shelf with brass brackets, as in repair complete all as specified and directed. (Make: ESS ESS, Cat No: 207A / PARRYWARE, Cat No: T6010A1 / CERA, cat No: F5005103 / PRAYAG, Cat No: BEA-44)

S&F in repairs glass shelf with chromium plated bars incl taking down old one complete all as specified and directed. (Make : Jaquar, Cat No : AQN-7771 / ESS ESS, Cat No: AC-207 or equivalent model in CERA / PARRYWARE / PRAYAG)

S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )

S&F in repair chromium plated brass over head shower rose with arm (premium quality), with 3 flow, fixed to 15mm bore of iron pipe including taking down existing shower complete all as specified and directed. (Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104A or equivalent model in JAQUAR / HINDWARE)

S&F in repair Chromium plated brass Wall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-273KNUPR / PRAYAG, Cat No: 9275 / CERA, Model: OCEAN / PARRYWARE, Cat No: G1417A1 / HINDWARE, Cat No: F200020 / ESS ESS, Cat No: C-216)

S&F in repair Chromium plated brass Wall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-281KN / PARRYWARE, Cat No: G1417A1 / ESS ESS, Cat No: C-218 / CERA, Model : OCEAN / PRAYAG, Cat No: 9280 / HINDWARE, Cat No: F200022) NOTE: Telephone shower shall be measured and paid seperately.

S&F fancy type chromium plated telephonic hand shower with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed. (Make : PARRYWARE, Cat No: T9983A1/ Ess Ess, Cat No: HS 105) / PRAYAG, cat No: BHS-91S / CERA, Cat No: F7030502 / HINDWARE, Cat No: F160053 or equivalent model in JAQUAR)

S&F as in repair Shower panel with hand shower, 4 horizontal massage body jets with over head shower complete all specified and as directed. (Make: PARRYWARE, Model: VERVE / CERA, Model: CHARIS or equivalent model in HINDWARE / JAQUAR)

S&F in repairs Mono block water pressure pump set of capacity 0.50 HP single phase , discharge range 36-60 Lpm, working in voltage range 220-240 V with operating pressure range 1.4 -2.4 (Bar) complete including with closed discharge valve and connected fittings & tank complete all as specified and as directed. (Make: KILOSKAR - ETERNA, Model: SJPBS 42420-HL / CERA, Model: CRYPTON LITE or equivalent model in CROMPTON / KSB)

Supply, hoisting and fixing in repairs rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 500 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

- do - but 1000 ltr capacity

- do - but 1500 ltr capacity

- do - but 2000 ltr capacity

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. 152 or equivalent model in JEXON / POLYTUF / SHAKTI)

- do - but including taking down existing ball valve 20 mm bore

S&F 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. 153 or equivalent model in JEXON / POLYTUF / SHAKTI)

- do - but including taking down existing ball valve 25 mm bore

S&F 40 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. 155 or equivalent model in JEXON / POLYTUF / SHAKTI)

- do - but including taking down existing ball valve 40 mm bore

Supply, laying and testing 15 mm bore GI tubing (medium grade) with new fittings such as bend, Tee, Elbow including welding work for jointing with flange and pipe etc., fixed to walls, and ceilings or laying in floor as in repair complete all as specified and directed.

-ditto- but 20 mm bore pipe

-ditto- but 25 mm bore pipe

-ditto- but 40 mm bore pipe

M&L for cutting chases for concealed water tubing, pinning in making good to facing where required in cement mortar (1:3) to brick wall cutting girth n.exc. 10cm girth complete all as directed.

Disconnecting exiting water storage Tank of capacity exceeding 500 litres but not exceeding 1000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including fixing of any damaged accessories for water Tank and writting MES No Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10 Nos each tank ) and re-connecting and refixing all connections complete all as specified and directed.

Disconnecting exiting water storage Tank of capacity exceeding 1000 litres but not exceeding 2000 liters for cleaning of water tank, removing of mud, sludge etc and flushing with chlorine water including fixing of any damaged accessories for water Tank and writting MES No Unit Name (With capital letter, not exceeding 15cm height and not exceeding 10 Nos each tank) and re-connecting and refixing all connections complete all as specified and directed.

Supply only PVC water tank cover, for any capacity tank, alongwith mild steel nuts, bolts and washers of suitable size complete all as specified and directed

M&L 18-20mm thick granite slab in window cills, cooking platform etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of granite, grinding, polishing, laid over and including screed bed 20mm thick in cement mortar 1:4 incl dismantling existing slab/tiles complete all as specified and as directed.

S&F in repair Gun metal gate valve, 15 mm bore, as per IS : 778-84 Class-1 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions complete as all specified and as directed.

-ditto- but 20 mm bore

-ditto- but 25 mm bore

-ditto- but 40 mm bore

S&F in repairs Cast iron rainwater pipe 100 mm bore in any length with or without ears with cement joints (1:1), fixed on walls with FI clamps and including taking down existing pipe (upto 4 th storey) complete all as specified and directed.

-ditto- but 150 mm bore pipe

S&F 100 mm bore CI bends or elbows or obtuse, fixed in proper position for any building height complete all as specified and directed

-ditto- but for 150 mm bore pipe

S & F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC (SWR) bends any radius

S & F PVC solid door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter of 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement all as directed

MS HORIZEN

GHOSH ENTERPRISE

UNIVERSAL TRADING CENTRE

UNITED ENGINEERS

H D CONSTRUCTION

PRABIR TRADERS