Providing Installation Testing and commissioning of Floor mounted Tower Air conditioner in the Dining hall of Officers Institute of Ftr HQ SPL OPS BSF at Bangalore SH II Installation Testing and commissioning of Floor mounted Tower Air conditioner

Amount

Supplying, Laying and fixing of 3.5 core, Aluminum stranded conductor Power Cables, XLPE Insulated,cores laid up, PVC tape innersheathed, Armour galvanised steel strip,extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7098(Part 1) 1988 of 35 Sqmm size on wall surface (clamped with 1mm thick saddle) as required.

Installation, Testing and commissioning of 4 Ton tower air conditioner indoor and outdoor as required.

Providing and fixing indoor stand for 4 Ton tower air conditioner indoor made by 50x50x5 mm of angle iron including Rubber cap on lags, welding, making bend, hole etc as per direction of engineer of charge as required.

Refilling/Topup and testing of R410A gas for 4 ton tower air conditioner as required.

Providing and Installation of 3/4 inch and 3/8 inch copper piping for 4 ton tower air conditioner with 10 mm thick insulation as per direction of engineer of charge as required.

Providing and Installation of 100 x 75 mm Pvc Cable Trunking and Channel Duct including joint, Tee etc as required as per direction of engineer of charge.

Providing and Installation of Busbar chamber of 200 amp triple pole neutral aluminium bus bar as per direction of engineer of charge as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. I) 4 x 6 sq. mm.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. I) 25 mm.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). I) 8 way (4 + 24), Double door.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. I) Triple pole and neutral.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. i. 3½ X 50 sq. mm (35mm).