Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹23.9 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹29.4 L+₹5.4 L (22.6%)Rejected-Finance 14 ILTIFATGANJ AMBEDKAR NAGAR UTTAR PRADESH 224145 UDYAM UP 04 0036158 | AMBEDKAR NAGAR | UTTAR PRADESH | 224145 | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | Rejected-Technical H NO 177 GOVINDPURA SATWARI JAMMU CANTT 180003 J K | JAMMU | JAMMU AND KASHMIR | 180003 | - | Rejected-Technical Not enlisted in a (ii) category |
Tender Value
Refer Docs
EMD Value
₹64,400
Closing Date
29 Aug 2022, 6:00 pmClosed
GE Jammu
GE Jammu c/o 56 APO Pin-900277
SPECIAL REPAIR OF SEWAGE LINE AND ALLIED WORKS IN REGT AREA AT SK LINES INCLUDING CERTAIN MINOR WORKS IN MIRAN SAHIB UNDER GE JAMMU
2022_MES_542539_1
GEJC-39/2022-23
Open Tender
Civil Works
Item Rate
200 days
AoR of GE Jammu
Please refer Tender Documents
9 documents required · 9 mandatory
₹500
GE Jammu
₹64,400
Yes
13 Oct 2022
2 Aug 2022
31 Aug 2022
2 Aug 2022
29 Aug 2022
16 Aug 2022
Amount
Excavation in trenches not exceeding 1.5m wide not exceeding 1.5m in depth for foundation etc, or for shafts, wells cesspits, manholes, pier holes, etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in hard / dense soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5 m wide and exceeding 1.5m but not exceeding 3.0 m deep and getting out in hard / dense soil complete all as specified and sd directed.
Demolition / breaking of drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar and taking out off trenches and removing the debris from the site all as specified of 150mm / 200 mm dia pipe including demolition of cement concrete haunching etc complete all as specified and as directed.
Material and labour for concrete bed to 150 mm bore pipe (1:4:8) in D-2 (using 40mm graded crushed stone aggregate) including haunching against the sides of pipe complete all as specified and as directed.
Supply and fixing and laying 150 mm thick reinforced concrete pipes class NP-2 laid and jointed complete with collers as in trenches complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.
Removal of surplus excavated soil to a distance exceeding 250 m and not exceeding 500m and deposited where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
Cleaning of septic tanks / manhole of any capacity by removing sludge and sludge water by pumping machine opreated with vacuum pressure to suck the sludge and containing in itself and the sludge / sludge water is to be disposed off to a distance of 2 Kms outside the peripherry of defence land including taking off and refixing manholes covers complete all as specified and as directed.
Demolition of cement concrete in ground floor and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
Material and Labour for cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.
Material and Labour for cement concrete (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel and drains including necessary form work etc complete all as specified and as directed.
Material and Labour for cement concrete in benching (similar to surface channel) with concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) complete all as specified and as directed.
Material and Labour extra for forming fair finished drain or channel 30 cm inner girth in cement concrete including moulds, mitred / stopped end etc complete all as specified and as directed.
Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed.
Material and labour for brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.
Material and Labour for 15 mm thick rendering on fair faces of brick work or concrete surface in CM (1:4) mixed finished even and smooth without using extra cement complete all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
Material and labour for providing precast cement concrete in cover slab (for manhole) (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) set in CM (1:4) complete all as specified and as directed.
Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bend to shape etc complete binding with and including mild steel annealed wire not less than 0.09 mm dia conforming TMT bars complete all as specified and as directed.
Material and labour for mild steel work as in framed work as in frame for septic tank / manhole cover complete all as specified and as directed.
Material and Labour for cement concrete (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in coping of man holes complete all as specified and as directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete (1:2:4) type B-1 smooth finished and reforming benching as required of 2000mm dia pipe complete all as specified and as directed.
Material and Labour for construction of soakage well 3.60m dia and 3m (effective depth) deep excavation in any type of soil foundation in PCC (1:3:6) walls of honey combed brick work with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick work in CM RCC cover slab M-25 / SFRC cover interconnecting pipes of RCC / DEC complete filled with brick bats all as shown on drawing no. CEPZ/C-TD/013/13 1/5 to 5/5 dated 11 Sep 2013 complete all as specified and as directed.
Material and Labour for construction of soakage well 1.80 m dia and 3m (effective depth) deep excavation in any tpye of soil foundation in PCC (1:3:6) walls of honey combed brick work with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick work in CM RCC cover slab M-25 / SFRC cover interconnecting pipes of RCC / DEC complete filled with brick bats as shown on drawing no. CEPZ/C-TD/013/13 1/5 to 5/5 dated 11 Sep 2013 complete all as specified and as directed.
Material and Labour for construction of septic tank for 100 users capacity including excavation and earth work in ordinary soil, foundation with PCC (1:2:4), type B-1, brick work in CM (1:4), RCC (1:2:4) type B-1 slab, RCC precast manhole cover having 6mm plate embedded around with angle iron frame, vent shaft and sludge chambers etc all as shown on drawing no. CEPZ/C-TD/013/13 1/5 to 5/5 dated 11 Sep 2013 complete all as specified and as directed. Note: - Rate quoted includes final depth of Invert level of septic tank on the basis of longitudinal slope of sewage line.
Material and Labour for construction of septic tank for 25 users capacity including excavation and earth work in ordinary soil, foundation with PCC (1:2:4), type B-1, brickwork in CM (1:4), RCC (1:2:4) type B-1 slab, RCC precast manhole cover having 6mm plate embedded around with angle iron frame, vent shaft and sludge chambers etc all as shown on drawing no. CEPZ/C-TD/013/13 1/5 to 5/5 dated 11 Sep 2013 complete all as specified and as directed. Note: - Rate quoted includes final depth of Invert level of septic tank on the basis of longitudinal slope of sewage line.
Taking up or down CI / PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints and removing lead of 100 / 75 mm dia pipe complete all as specified and as directed.
Supply and fixing cast iron soil, waste and vent pipe of bore 100mm in any length with or without ears with cement joints fixed to wall complete all as specified and as directed.
Supply and fixing cast iron soil, waste and vent pipe of bore 75mm in any length with or without ears with cement joints fixed to wall complete all as specified and as directed.
Supply and fixing cast iron soil, waste and vent pipe of bore 100mm in any length with or without ears with cement joints laid in floors complete all as specified and as directed.
Supply and fixing cast iron soil, waste and vent pipe of bore 75mm in any length with or without ears with cement joints laid in floors complete all as specified and as directed.
Supply and fixing in repair 75 mm bore cast iron bends (any radius) with oval access doors complete all as specified and as directed.
Supply and fixing in repair 100 mm bore cast iron bends (any radius) complete all as specified and as directed.
Supply and fixing in repair 75 mm bore cast iron branch pieces (Tee), single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access complete all as specified and as directed.
Supply and fixing in repair cast iron vent cowl 75 mm complete all as specified and as directed.
Supply and fixing in repair stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 75 mm bore pipe complete all as specified and as directed.
Supply and fixing in repair stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 100mm bore pipe complete all as specified and as directed.
Supply and fixing 75 / 100 mm cast iron floor trap with stainless steel grating including jointing to waste pipe fixed in cement concerete (1:2:4) type B-1 complete all as specified and as directed.
Supply and fixing in repair PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia complete all as specified and as directed.
Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and as directed.
Material and Labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85 / 25 or 80 / 100 grade and three parts of sand (all by weight) complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Material and Labour for non skid ceramic colour tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm screed bed CM (1:6) complete all as specified and as directed.
Material and Labour for glazed ceramic colour tiles (450 x 350 mm) x 7 mm thick as in dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering CM (1:4) complete all as specfied and as directed.
Supply and fixing 0.8 mm thick plate rack stainless steel of size 600mm X 900mm fixed with washer and plugs and making good disturbed portion complete all as specified and as directed.
Supply and fixing sinks with drainage board made of stainless steel 1 mm thick in kitchen with plugs, washers and waste coupling, waste pipe, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm, bowl size 410mm x 330mm x 160 mm complete all as specified and as directed.
Supply and fixing 15 mm bore bib taps long nose / long body, cast copper alloy chromium plated fancy type with capstan head handle screwed down, screwed for brass, weight not less than 450 grams ferrule and fixed complete all as specified and as directed.
Supply and fixing 15 mm bore steel tubing, medium grade, galvanished with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and water tightness test as directed by Engineer-in-Charge.
Material and Labour for 10 mm thick rendering in CM (1:3) on other than fair face brick work even and fair faces to receive tiles complete all as specified and as directed.
Material and Labour for glazed ceramic colour tiles (300 x 200 mm) x 7 mm thick as in dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specfied and as directed.
M/S R S CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .