Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹26.1 L+₹22,813.33 (0.88%)Rejected-AOC NO 14 M C RAJA STREET MITTANAMALLI I A F AVADI CHENNAI 600 055 | CHENNAI | CHENNAI | TAMIL NADU | 600055 | L2 | Rejected-AOC not being L1 | |
| 3 | L3₹27.4 L+₹1.5 L (5.68%)Rejected-AOC | L3 | Rejected-AOC not being L1 |
Tender Value
Refer Docs
EMD Value
₹56,000
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Avadi
Garrison Engineer, Muthapudupet, Avadi, Chennai-55
PROVISION OF CERTAIN MAJOR REVENUE AND MINOR WORK AT MTTI, ED, WCMDA TOWER AND TETTRA SCHOOL AT AF STATION UNDER GE AVADI
2022_MES_565705_1
8969
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer, Muthapudupet, Avadi, Chennai
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer, Avadi
₹56,000
8 Feb 2023
28 Nov 2022
10 Jan 2023
28 Nov 2022
2 Jan 2023
13 Dec 2022
Amount
Dismantling floor,hearth or wall tiling including cement mortar bedding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed.
Taking down cement plaster of any description on brick or stone walls/ceiling etc, including racking out joints, hacking key, scrubbing down with water etc complete all as directed.
M&L for 40mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in sub base for tiles in floors.
M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular ) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 20 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for coloured Glazed ceramic tiles in vertical surface of size 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or color cement to match laid over 10mm thick cement plaster in CM 1:4 on fair/rough faces of brick or concrete surface etc complete all as specified and directed.
M & L for Rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and surface finished even & fair without using extra cement all as specified.
M&L for Rendering 5mm thick in cement mortar 1:3 on ceiling concrete surfaces, finished the surface even and smooth without using extra cement , complete, all as specified.
M & L for prepration of newly plaster surfaces of wall and applying three coats white wash all a specified and directed.
M&L for 5 mm thick in cement mortar 1:4 with WPC rendered over 10 mm thick plaster in CM 1:6 finished even and fair without using extra cement all as specified. Note: WPC shall be measured and paid seperately.
Supply only Integral Water Proofing Compound complete all as specified.
M&L for preparation new surfaces of wall applying two coats of cement based paint over coat of alkaline resistant primer complete all as specified.
Taking down chowkats or frames n. exc 1.5 sq. m with shutters (without taking off shutters from the frame) all as directed.
Supply and fix powder coated aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc. complete all as specified.
S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified
Supply and fix 5.50 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm each pane for doors, windows and partition complete all as specified
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction.
S&F Aluminium anodized barrel tower bolt of extruded section 150mm size complete all as specified.
Taking up or taking down Steel/ iron Tube of 15mm dia bore and connections complete all as directed.
Taking up or taking down Steel/ iron Tube of 20 mm dia bore and connections complete all as directed.
S&F GI tube 15mm bore medium grade including all fittings fixed to walls all as specified.
S&F GI tube 20 mm bore medium grade including all fittings fixed to walls all as specified.
S & F in repairs for Vitreous china urinal partition white of size 310 X 700 mm fixed all as specified.
S&F in repair viterous China wash down water closet (pedestal pattern) complete, including plastic with recessed bottom , seat cover health faucet jet and PVC flushing cistern of 10 Ltrs capacity and PVC 32mm dia flushing pipe complete all as specified.
S&F in repair viterous China squatting pan Orissa pattern size 580x440 mm white integral foot, including PVC flushing cistern 10 Ltrs capacity and PVC 32mm dia flushing pipe all as specified
S&F Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe including flushing pipe all as specified.
S&F Counter top vitreous china wash basin white flat back size 460 x 220 mm including waste fittings of brass chromium plated 32 mm (excluding waste pipe, taps chain and plug) complete all as speified fixed in repairs. Make :- Prayag Cat No 4793 or equivalent make in PS as approved by GE.
M&L for 75 mm dia PVC (SWR) multi floor trap,with grating with hole as required including, jointing with solevent cement, etc all as specified and directed.
S&F pillar taps cast copper alloy fancy type with capstan heads, chromium plated, screw down high pressure with or W/O lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed 15mm bore all as specified.
Supply and fixing 15mm dia Stop valves, cast copper alloy fancytype, chromium plated, screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed all as specified and directed.
S&F for PVC connections 15mm size with PTMT nuts of length 450mm all as specified.
S&F Bib tap, cast copper alloy Chromium plated,fancy type, screwed down high pressure with crutch or butterfly handle for 15mm bore all as specified.
S&F 20 mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe fixed all as specified.
Dismantling water tanks exc 500 litre & n.exc 1000 litre capacity all as specified and as directed.
S&F rotational moulded polyethylene three layered water storage tanks (cylindrical vertical with closed top) hosited and fixed in position of 1000 ltr capacityall as specified in SSR pt-1
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar and removing complete all as directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches etc complete all as specified.
S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trench all as specified.
S&F 110 mm PVC ( SWR) WC connector with lip ring to fit WC outlet all as specified.
Material & Labour for Brickwork with fly ash bricks using old size bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4; complete all as specified and as directed.
M&L for RCC 1:2:4 type B-1 using 20 mm graded stone aggrigate as in Beams, cantilevers, bressummers, lintel over 1.5 mtr span complete all as spacified and directed. Note: Reinforcemet and formwork shall be measured and paid seperately .
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including craking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips all as specified.
All as per item No 42 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and directed.
M&L formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for flat rough finished concrete surfaces.
Material and labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including grinding and polishing complete laid over screed bed or bedding layer of 15 mm thick in cement mortar (1:4) for laying floors, steps, window cills, cooking platforms etc, complete all as specified and as directed.
Demolition of un reinforcement cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level all as directed.
M & L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate as in plinth protection/ path etc finished surface even and smooth witout using extra cement all as specified.
Excavation in post holes or (Similar holes) each n.exc 0.5cum, getting out, returning filling in and ramming earth or broken rubber mixed with earth around in layers, n.exc 25 CM watering and removing surplus soil to a distance n.exc 50m and making good surfaces in hard/dense soil all as specified and as directed.
M&L for PCC 1:3:6, type C2, using 40mm graded stone aggregate as in foundation of post holes filling and mass concrete all as specified.
S&F Steel work in tubular trusses including special shaped washer, connecting plates etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.
Supply & fixing frame work such as grills , gratings etc with ends of bars shoulderd and / or rivetted or forged into spikes framed guard bars etc confirming to FE 290 GDE E-165 all as specified.
M&L for two coat of synthetic enamel paint over a coat of red oxide primer on newly prepared steel surfaces over 10cm in width or girth not otherwise described all as specified.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Material & Labour for 100 mm thick PCC, 1:2:4, type B-2 using 20 mm garaded stone aggregate as in floor, even and fair with out using extra cement all as specified and as directed.
M&L for Brick work with fly ash old size bricks straight or curved on plan exc. 6m mean radius etc. built in CM 1:6 complete all as specified.
M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement all as specified.
S&F 100mm Butt hinges, heavy weight, cold rolled mild steel complete all as specified and as directed.
S&F 250mm Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.
M&L for precast Cement concrete cover slab in RCC 1:2:4, type B1 using 20 mm graded stone aggregate set in CM 1:4 all as specified and as directed. Note: Reinforcement shall be measured and paid separately.
M & L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required n exc 150 sq cm all as specified.
Excavating in trenches n exc 1.5m wide and n exc 1.5 m in depth for foundation etc., for shafts, wells, cesspits, manholes, pier holes, sewage pipe line etc., n exc 10sqm on plan and n exc 1.5m in depth and getting ot in hard /dense soil complete all as specified and as directed.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/ dence soil all as specified.
M&L for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in subbase all as specified.
M&L for 80 mm thick factory made chemferd edge cement concrete paver block of M-30 grade with approved colour design & pattern as in footpath park,low,drive ways of right traffic parking etc of required strength thikness of size / shape made by table vibratory method using PU mould laid in required colour & pattern over and including 50 mm thick compected bed course sand compecting and proper embeding / laying bedding layer paver block in to the sand bedding layer through vibratory compection by using plate vibrator filling the joint with fine sand and cutting of paver block as per required size and pattern finishing and sweeping extra sand complete.
Returning, filling in, with soil obtained from excavation including spreading, levelling, watering and well ramming in layer n.exc. 25 cm thick all as specified.
Removal excavated surplus soil to a distance n.exc. 50 m and depositing where directed at level n.exc. 1.5 m above the starting point all as directed.
M & L for PCC 1:2:4 type B-0 using 12.5 mm graded stone agg as in coping including formwork all as specified and directed.
M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified.
M&L for PCC 1:4:8 tybe D2 using 40mm graded stone aggregate as in foundation all as specified.
M&L for RCC M-20 grade (Nominal mix) using 20 mm grade granite stone aggregate as in foundations, including rafts, footings, foundations, beams,plinth beams, bases all as specified and as directed. Note: Reinforcement form work shall be measured and paid seperately.
M&L for Formwork to sides of concrete foundations, footing ,bases of colums, plinth beams rough finished surfaces and similar work vertical or to batter for flat surfaces complete all as specified and as directed .
S&F mild steel Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe 410-W (Gde E-250) Quality all as specified and as directed.
S&F MS Plate ( plain or chequered ) chanel, sqaure cut or notched (ondinary and counter sunk forming hole with out any attachment,with riveted, bolted or welded attachment of Fe 410-W (Gde E-250) Quality etc complete all as specified and as directed.
S&F Mild steel screw bolts (machine made) with hexagonal or squre heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washer and one hexagnal or squre exc 5cm and n exc 10 cm long all as specified.
Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws for ridge all as specified and as directed.
Material and labour for 150 mm thich concrete flooring with RMC M-25 Grade concrete using vaccume dewatering method laid in alternate bays including steel formwork of MS channel section and depth equal to thikness of concrete floor with vaccum flot to obtain level joint filled with sealing compound including prepring of old surface applying cement sulay 3kg /10 sqm all as spacified and as directed.
supply only metallic floor hardner for wearproof tooping @ 1kg/sqm all as specified.
M&L for forming 12 mm thick expansion joints filled with pre formed bituminous filler 100mm depth and top 30mm shall be applied with primer and sealed with sealing compound Grade "B" all as specified.
S&F Framed work as in doors or gates of angle or other section confirming to FE-410W, Gde-250 Quality A complete all as specified and directed.
Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.
M & L for point wiring with 1.5 Sqmm (nominal area) PVC insulated,FRLSH unsheathed, multistrand, 1100 volts grade copper conductor cable single core, drawn through with and including non metallic PVC conduit not less than 25mm dia and its accessories fixed on wall/ ceiling/ trusses /steel structure with suitable clamps , screws etc including one run of 1.5 Sqmm PVC insulated copper conductor cable green in colour for continuous earthing, 1.6 mm thick MS terminal box finished to wall/steel structure with 3 mm thick laminated hylam sheet top cover all as specified for :-
One light point controlled by one switch.
One exhaust fan point controlled by one switch.
One 3 pin 5 amps socket point on same board
One switch socket outlet 3 pin 5 Amps on independent board.
All as per item No 81 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulated single core multistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board and industrial socket complete all as specified and as directed.
M&L ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified.
S&F switch piano, flush type single pole, one way 5 Amps complete all as specified.
S&F switch socket 3 pin 5 amps , multi pin , flush type,complete all as specified.
Surface and wall mounted LED tube light fitting, 20 W, batten type, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.0sqmm 3 core copper conductor flexible wire from ceiling rose to fitting with the following parameters,complete all as specified and as directed. Make:- C&S (LTTB4F20WLED/W) /Crompton :- CCS-103-20-65-SL-DP-NWH / Havells :-LUMILINEPLUSSBS20WLED865SPCSS
Supply and fix Decorative ECO bulkhead luminaire capacity 10/12W, environmental friendly ultra-modern energy saving surface mounted, LED luminaire comprising of high brightness and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz complete all as specified. Make : Eco Bulkhead (LBKOVSL12)of Luker/ Crompton:- LBHP-10-CDL/ Surya :- SLE BH 10W
S&F Sheet metal enclosure (DB) Single Pole and neutral 8 way, 240 Volt with 200 Amps rated bus bar double door complete including taking down old unserviceable DB with all accessories complete all as specified.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of double poles and current carrying capacity SPN 40 to 63 AMP in the MCB DB complete with connection testing and commissioning complete all as specified.
Exhaust fan, heavy duty, 300mm sweep, 1370 RPM, with louvers, metal body conforming to IS-2312-1967, AC single phase, 240 Volts, 50 Hz and connecting including provision of two way PVC connectors, 1 sqmm flexible three core multistranded copper conductor cable from ceiling rose or connector to fan including earthing and fixing arrangements like making hole in wall and finishing to shape to match adjoining surface and writing MES No.20mm height with synthetic enamel paint black complete all as specified and as directed.
S&F MCB DB SPN 4 way, double door, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCB double pole as incomer and SP MCBs as outgoing with tinned copper bus bar, neutral link, earth link and connecting up complete all as specified and as directed. Note : Incoming and Outgoing MCB measured separately relevent items.
Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, two runs of single core 6 sqmm conforming to IS-694, drawn through and including suitable dia rigid PVC conduit, conduit fittings and conduit accessories alongwith one run 6 sqmm PVC insulated single core multistranded copper conductor cable (green) as earth continuity conductor concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc. and connecting to common earth dolly complete all as specified and as directed.
S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all specified.
Earthing complete with galvanised iron earth plate electrode 600mm X 600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of the earth plate at a depth not less than 1.5 metres below ground level, connected to earth lead as described here-in-before by means of bolts, nuts, washers and checknuts made out of galvanised iron or mild steel, earthing lead protected by as described here-in-before and connected to main switch board or main control board or electric pole all as shown on electrical plate No.3 of MES Sch Part-I including necessary earth work and excavation in any type of soil, plain cement concrete 1:3:6, type C1 chamber, reinforced cement concrete cover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm dia TMT bars at 140mm centre to centre both ways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugs including testing complete all as specified and as directed.
Supply and laying of CPVC pipe of size 25 mm bore(Inner Dia) , Grade SDR 13.5 (Class 2) with ISI mark including all fitting and fixtures like coupler, male adapter plastic threaded, reducing male adapter plastic threaded, union, frame adapter plastic threaded etc laid in trenches/walls/roof/floor etc all as specified and as directed.
Supply and fix CPVC Ball valve with brass threaded of size 25 mm bore(inner dia) , grade SDR 13.5 (class 2) with ISI mark complete all as specified and as directed.
Supply and laying of common burnt clay building bricks, sub class B of size 230x115x75mm for cable protection all as specified and as directed.
Laying of fine seived excavated dry soil including spreading, levelling, punning for cushioning of cable all as specified and as directed.
Supply & Lay cable XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor extruded PVC Type ST2 Outer sheathed, 650/1100V as per IS 7098(part-I) of size 2 core 16 sqmm complets all as specified and as directed. Note :- (i) Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. (ii) Earth work such excavation, refilling, etc. shall be measured separately under relevant items.
Supply & lay GI pipe light grade including necessary fittings of 25 mm bore complets all as specified and as directed.
SAMYDOSS CONSTRUCTIONS
VIJAYALAKSHMI ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .