CONSTRUCTION OF 100000 LITRES CAPACITY SUMP AT PAZHAVOOR NEW COLONY AND BOREWELL

Amount

Earthwork excavation in hard stiff clay,black cotton, hard red earth, shales,murrams, ordinary gravel stoney earth mixed with 50% fair sized boulders etc.,with an initial lead of 10m and lift of 2m. and as directed by Higher Officials

2nd depth of 2m to 3m

Filling with clean river sand complying with standard specification including watering ramming and consolidation etc., complete and as directed by Higher Officials.

Levelling coarse in cement concrete 1:4:8 (one cement,four sand and eight aggregate) using 40mm hard broken stone for foundation and leveling coarse including cost of all materials,mixing,placing, ramming, curing,finishing etc., complete and as directed by Higher Officials

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Upto 1.50 m Below GL

Upto 4.50 m above GL

Supply and erection of steel centering,shuttering for soffits and sides including necessary supports and strutting for all RCC works using MS sheets of suitable size of BG 10stiffened with MS angle of size 25 X 25 X 3mm for boarding laid over Silver Oak joists of size 10cm X 6.5cm space at 10cm c/c and supported by Casurino Props 10cm - 13cm spaced at 75cm c/c etc., complete and as directed by Higher Officials

For 0.00 to 3.30 M (Curved Surface)

For 0.00 to 3.30 M (FOR ROUND COLUMN)

For 3.30 M- 4.3 M (Plane Surface)

For 3.30 M TO 4.30M (Curved Surface)

For 4.3 M - 5.30 m (Plane Surface)

Supplying, fabricating and placing in position of RTS rods for reinforcement including cost of steel and binding wire, labour charges etc., complete for RCC works and as directed by Higher Officials

Providing and fixing of cut stone (Rough dressed) set in CM 1:3 of size 0.45 X 0.45 X 0.15M at site including cost of all materials, mixing, placing position, lifting, vibrating, finishing curing,finishing etc., complete and as directed by Higher Officials

Providing RCC Ventilator of 0.15 m dia using 20mm HBG stone including cost of all materials, centering, shuttering, strutting,reinforcement, placing of concrete, finishing, curing and fixing in position on the roof slab with mosquito proof net arrangement and etc.,

Supply,Delivery and fixing of CI Manhole frame with cover of following size including cost of all materials, fixing of MS clamps,Bolt and nuts etc.,complete and as directed by Higher Officials

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Refilling the foundation with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification and as directed by Higher Officials

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B for foundation

Cement concrete 1:4:8 mix using 40m ISS size HBG metal including all cost and conveyance and all labour charges etc., complete.

Refilling the basement with excavated earth other than sand and all labour charges such as watering and ramming etc., complete as per standard specification.

Random Rubble Measonry in CM 1:5 mix using required bond stone with simulataneous pointing including all cost and conveyance and all labour charges etc., complete.

Brick work in cm 1:5 mix using country bricks including all cost and conveyance and all labour charges etc., complete.

Centering charges for all concrete works including all cost and conveyance and all labour charges etc., complete.

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

S/D of steel door

Fixing in Position of steel door

Finishing the top of roof with one course of PRESSED TILES of size 20 cm X 20 cm X 2 cm laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight.

Plastering with CM 1:3 mix using to 10mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Distempering two coats using best quality and approved colour of oil bound distemper over one coat of cement paint primer including all cost and conveyance of materials, labour charges etc., complete.

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including all cost and conveyance and all labour charges etc., complete.

Painting two coats over New iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc., complete.

Supply and delivery of 5 HP submersible motor pump set (Three Phase) with duty condition of 100LPM against 100m head etc., complete.

Supply and delivery of Panel Board (Three Phase) for 5 HP Submersible motor pump set

Supply and delivery of 3core 4mm2 flat submersible cable

Supply and delivery of 50mm dia GI Pipe

Charges for erecting submersible motor pump set with proper cable, EB Service, Trial run & clamping etc., complete.5 HP Submersible motor (Three Phase)

Geophysical investigation charges

Drilling of 180mm dia deep borewell in overburden soil including labour charges and transportation charges

up to casing pipe

Supply and delivery of CS casing pipe

Supply and delivery of 5 HP submersible motor pump set (Three Phase) with duty condition of 100LPM against 125 head etc., complete.

Supply and delivery of 5HP 3 phase panel board

Supply and delivery of 4sq.mm 3 core copper cable

Supply and delivery of 40mm dia UPVC Pipe

Charges for erecting submersible motor pump set with proper cable, EB Service, Trial run & clamping etc., complete.5 HP Submersible motor (Three Phase)

Supply and delivery of 75mm dia 6 KSC PVC pipe

Supply and delivery of 90mm dia 6 KSC PVC pipe

Earth work excavation with an initial lead and lift in hard stiff clay, black cotton, hard red earth, sub murram gravel, stone and earth mixed boulders as per SS20B.

Refilling excavated earth including all cost

Laying of PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

Laying of PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

Wiringwith2x1.5sq.mm.(22/0.3)PVCinsulatedSCunsheathedcopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessoriesandwithTWswitchboxand5AFTswitchwithpainting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) SD 18

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-125

Supply and fixing of 32 Amps DP Switch of 500 V with matal clad with fuse and neutral (Side Handle) on suitable TW Board with earth connection only.SD-144

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains SD 64

Supply and fixing of 25mm dia GI Pipe including cost and conveyance all labour charges etc complete.SD69

Supply and fixing of CFL bulb SD 80

For EB service connection

SUBASH (BID ID -1351524)