Loading…
Loading…
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
2 Sept 2026, 6:00 pm
GE AF SURATGARH
SURATGARH
PERIODICAL SERVICES WITH SMART PERIODICAL METHODOLOGY TO INTERNAL AND EXTERNAL SURFACES OF BUILDINGS AT MARU VIHAR AREA AT AF STATION SURATGARH
2026_MES_783823_1
8363/E8
Open Tender
Civil Works
Item Rate
210 days
GE AF SURATGARH
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE AF SURATGARH
₹90,000
Yes
11 Aug 2026
11 Aug 2026
5 Sept 2026
11 Aug 2026
2 Sept 2026
26 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.01 | BOQ (PERIODICAL SERVICES WITH SMART PERIODICAL METHODOLOGY TO INTERNAL AND EXTERNAL SURFACES OF BUILDINGS AT MARU VIHAR AT AF STATION SURATGARH) | - | - | - | - |
| 1 | Demolition of cement concrete (un-reinforced ) of any description in ground floors and paving not exceeding 15 cm thick (below or above the ground level) and removing rubbish from the premises. complete all as specified and directed. | 23 | Cum | 100 | ₹2,300 |
| 2 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd. | 30 | Each | 101 | ₹3,030 |
| 3 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd. | 24 | Each | 104 | ₹2,496 |
| 4 | M&L factory made Pressed steel frames of size 105mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. | 58 | RM | 104 | ₹6,032 |
| 5 | M&L factory made Pressed steel frames of size 125mmx60mm made of 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified. | 55 | RM | 105 | ₹5,775 |
| 6 | S&F factory made 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats
Note: Glass/wire gauge shall be measured and paid for seperately. | 20 | Sqm | 105 | ₹2,100 |
| 7 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified. | 72 | RM | 107 | ₹7,704 |
| 8 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification. | 19 | Sqm | 107 | ₹2,033 |
| 9 | S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified. | 45 | Each | 110 | ₹4,950 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.93 MB
Tenderdocuments8363.pdf
Tender Documents • 1.11 MB
BOQ_878235.xls
BOQ • 0.97 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].