CERTAIN REPAIR TO AREA ACCOUNT OFFICE AND DAD COLONY UNDER AGE B/R-II OF GE (EAST) JRC

Amount

Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground level) and removing surplus spoil out of Defence Land complete all as specified and directed.

M&L for 50mm PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement all as specified.

M&L for 40mm thick PCC (1:2:4) type B1 using 20mm graded aggregate as in floor topping; concrete surface finished even & smooth without using extra cement complete all as specified.

S&F glass dividing strips, 38mm width 3mm thick and inserted in position to conforming to design.

Dismantling floor, hearth or wall tiling/kota/Chequered/interlocking/udaipur/ granite stone tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified.

M&L for non skid joint free ceramic coloured tiles (premium quality) of size exc 0.11 Sqm and not exc 0.18 Sqm, 6-7 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. Make:- Somany/ Kajaria/ Johnson/ orient bell.

All as per item No 6 above but on vertical surfaces such as dado, skirting etc over and including 10 mm thick cement plaster finished even and rough to receive tiles in Cement mortar (1:4) complete all as specified. Make:- Somany/ Kajaria/ Johnson/ orient bell.

M&L for coloured glazed tiles of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 15mm thick rendering in CM 1:4, all as specified and directed Make:- Somany/ Kajaria/ Johnson/ orient bell.

M & L Vitrified ceramic tiles 10mm thick (Square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed or bedding layer in Cement Mortar (1:6) as in floor finished even and rough to receive the top layer all as specified and directed. Make:- Somany/ Kajaria/ Johnson/ orient bell.

All as per item No 9 above but on vertical surfaces such as dado, skirting etc over and including 10 mm thick cement plaster finished even and rough to receive tiles in Cement mortar (1:4) complete all as specified. Make:- Somany/ Kajaria/ Johnson/ orient bell.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls and making good by cement mortar(1:4) including pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed Cement Mortar (1:6) 15 mm thick colour of granite as approved all as specified and directed by Engr-in-Charge.

M&L for 60mm thick pre-cast factory made machine pressed coloured cement concrete (M-40 design Mix) inter-locking coloured blocks /tiles ,shape and pattern as directed, and filling of joints with sand including compaction with plate vibrator before and after laying of paver blocks incl dismantling of old paver block complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in postiion not other wise specifically provided for.

M&L for reinforcement cement concrete type B-0 1:2:4 (12.5 mm graded aggregate )slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified.

M&L for MS TMT bars 10 mm and over dia and cut to lenth, bent to shape required incl cranking bending spirally for hooping for clos hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia.

M&L for repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor.

S&F vitreous china wash down water closet (Pedested patern ) white incl fixing bolt, plastic water closet seat cover white closed pattern, with & included arragement of jet sprey with flat bottom and cover and mild steel chromimum plated hinging device, fixed in repairs all as specified directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes/sewage pipe (any size or pattern), including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store.

S&F PVC (SWR) pipes with single socketed in any length with rubber ring joints fixed on brick walls 110 mm dia including demolition and braking up existing pipes complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal in radius 110 mm bore

S&F PVC (SWR) vent cowl 110 mm bore

S&F medium grade steel water tubing, 15 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed

S&F medium grade steel water tubing, 20 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed

S&F PVC white low level flushing cistem 10 ltrs capacity with all fittingscomplete all as specified.

S&F Vitreous china wash hand basin , white, flat back 550x400mm including brass CP waste coupling ,32mm dia , Pvc waste pipe with pvc connection , brackets 2 nos including cutting for and pinning in ends of brackets fixed in repair , complete all as specified

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers including cantilever cast iron brackets, connecting union ,waste coupling and waste pipe over all size 915 mm x 460mm with bowl size 410 mm x 330 x 160 mm.

S&F in repairs stainless steel kitchen plate rack fixed in wall having overall size 750mm X 600mmX 250mm complete.

S&F in repair new flexible PVC waste pipe of approved quality 32mm bore, 75 cm long with one end socketed fixed to waste coupling including one PVC reducer 32mm complete all as specified and directed.

S&F in repair brass chromium plated soap dish, complete all as specified and directed.

S&F 15mm dia CP Pillar tap ,brass, fancy type chromium plated , screwed down high pressure with long screwed for 15mm bore iron pipe and fixed in repair complete all as specified & directed.

S&F PVC connection fiber, reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends complete.

S&F 15mm Angle stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe and fixed in repairs .

S&F CP Bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type complete fixed in repairs.

S&F brass chromium plated shower rose of 75 mm size, with or without swivel joints including fixing to steel pipe or union.fixed in repairs.

S&F Brass chhromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges.

Acrylic corner set of 3 pieces as per sample approved by Engr -in-charge all as specifed and directed

S&F Chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality all as specified

S&F Toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws,all as specified and directed

S&F 500 ltr rotational moulded polythylene water storage tank UV protected antimicrobial, triple layer (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified.

S & F 1000 ltr rotational moulded polyethylene water storage tank UV protected antimicrobial, triple layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description complete all as specified fixed in repairs

S&F 20mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed .

Taking down door Shutters of any description exc 1 sqm and not exc 2 Sqm each all as specified.

Taking down chowkats or frame not exc. 1.5 sq m each with shutters (without taking off shutters from the fames)

Taking down chowkats or frame exc. 1.5 sq m but n.exc 4 sq m each with shutters (without taking off shutters from the fames)

S&F structural steel framed work of Grade Fe 410-W(Gde E-250) as in doors frame or gates including hold fast of angle or other section with gusset plates, rails, braces etc. Cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering. Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed.

S&F 2nd class hard wood 35mm thickness of factory made plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated.

S&F for 2nd class hard wood 35 mm thick glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I, sector 8, clause 8.20 (a) complete all as specified and directed.

S&F PVC solid door frame of size 50mm x 47mm made out of 5 mm plain/colour PVC sheet to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-II complete all as specified and directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.

S & F 30mm thick factory made PVC Flush Cup board shutter consisting of panel of hollow section thickness . Consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles. top and bottom rails and two 19mm x 19mm MS tubes inserted horizontaly inside the hallow profile section at an equal distance from top and bottom of door and fixed with hallow profile section using 5mm thick PVC sheet using screws Hollow PVC profile shall be lipped with 10 mm ( 5mmx 2) thick x 20mm width on stiles and rails using solvent cement . The inner panel shall be laminated with 5mm thick thick termite proof . water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc. Complete all as specified as per direction of Engineer-in -charge.

S&F butt hinges medium weight, cold rolled mild steel 100 mm size complete all as specified and directed.

S&F butt hinges medium weight, Stainless steel , bright polished 100 mm size for fixing PVC Door Shutter complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified.

S & F alumunium alloy sliding door bolt with hasp & staple and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed of size 300 mm long complete all as specified and directed.

S&F Mild steel pressed handles oval type stove enamelled black 150 mm size.

S & F extruded section aluminium alloy handles, fabricated type anodised of 150 mm complete all as specified and directed.

S & F aluminium anodised, barrel tower bolt of extruded section and fixed to 150 mm each complete all as specified and directed.

S&F Mild steel barrel tower bolts, 200mm long, stove enamelled black, with bright bolt complete all as specified and directed.

Supplying and fixing steel windows 1.25 mm thick Box type (primer coated) ERW hollow 'P' section of size 60 mm x 25 mm single rebated comprises of glazed sutter EWR sec 50 mm x 20 mm and 1 mm thick and two openable leaf conisting two Nos sash bar of 'T' section 20 mm x 3 mm complete welded to frame with one vertical mullion of EWR bot 'T' section of size 60 mm x 25 mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1, four Nos for each window including following fittings welded to failed shutter:- (a) Holdfasts 150 mm long 12mm x 3 mm made to shape- 4 Nos per window (b) Handle of Z sec 20 mm x 25 mm, 100 mm long - 1 nos per leaf. (c) MS tower bolt 150 mm long - 2 Nos per leaf. (d) 'Z' sec 20 mm x 25 mm , 100 long stopper-01 Nos per leaf, (e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 Nos per leaf (f) MS pintal hinges of size 75 mm x 12 mm - 2 Nos per leaf. (g) fabriction and fixing arrangement complete. Note:- Grill / guard war , glass pane shall be measured and Paid saperately.

All as per description of serial item No. 60 above but in gauged shutters without sash bars all as specified and directed.

All as per descripition of serial item no. 60 here in before but as in ventilators fixed type complete all as specified and directed.

S & F framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes ; framed guard bars barallel iron doors and similar work conforming to Fe.290.Gde-E-165.

S&F galvanized mild steel wire cloth 0.48 mm nominal dia and average width of aperture 1.40 mm and fixed with tinned tacks complete all as specified and as directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads.

M&L for 3.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane complete all as specified and as directed.

Dismantling of brick work or stone/boulders masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site all as specified and directed

Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6

All as per Item No 68 above but except bricks.

M&L for mild steel pipe 25 mm dia curtain road with PVC coating fixed in the MS hooks, and finials/side brackets (both side), all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc all as specified and as directed.

M&L 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified and as directed.

M&L 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface with water proofing compound finished fair and even complete all as specified and directed.

M&L 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified.

M&L for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engr -in-charge.

M&L for three coats of white wash on newly plastered surfaces of wall including preparation of wall surfaces complete all as specified and directed by Engr -in-charge.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of wall surfaces complete all as specified and directed by Engr -in-charge.

M&L for preparing new plastered or unplastered wall surfaces and applied two coat of cement base paint complete all as specified and directed by Engr -in-charge.

M&L for preparation of new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxidezinc chrome primer complete all as specified and directed.

Disconnecting float valve with float arm from PVC service water tank of any capacity, empting stored water through wash outlet, cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and finally washing the internal surfaces with bleaching powder, closing wash outlet, re fixing float valve in proper position, closing the top cover including minor repair if required and testing complete including writing in stencils “Cleaned on:_____(Date)” 3” height on outer face of tank with white paint of capacity of any capacity complete all as directed.

S&F in repairs 20mm for ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed.

Uprooting of trees,grass,bushes etc from brick wall/roof tiles or any surfaces of bldg including dismantling the requried brick work /rooftiles/mud concrete etc for uprooting the vegetation etc and make good the same to match existing surfaces with same material or concrete 1:2:4 type B-1 after pouring the chemical (which destroy the growth of vegetation to place where vegetation removed).The rate shall include for scaffolding or any other arrangment required during this process upto 10 mtr height complete all as specified

Taking down carefully existing point wiring of any type/ any size (ie on wooden/ batten, surface conduit wiring, casing capping wiring or concealed conduit wiring) complete for light, fan, socket or power point etc including removing switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, surface conduit only switch board outlets with sheets and other materials for taking credit of unserviceable light as per Sch of credit and keeping serviceable lights in safe custody for re-fixing under relevent items and making good disturbed surface of walls,roof, floors etc. with any type of civil wk involved complete all as specified and directed.

M&L for point wiring for light point with 1.5 Sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm cable drawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and incl sunken pressed steel boxes duly painted with anti corrosive paint over a coat of red oxide primer with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cup washers etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engr-in-Charge.

All as per srl item No. 85 above but for one fan point controlled by one switch complete all as specified

All as per srl item No. 85 above but for one bell point controlled by one bell push complete all as specified.

All as per srl item No. 85above but for one light point controlled by 2 Nos, two way switch complete all as specified.

All as per srl item No. 85 above but for one socket outlet 5 Amps on independent board complete all as specified.

All as per srl item No. 85 above but for one socket outlet 5 Amps on the same board controlled by one switch complete all as specified.

All as per srl item No. 85 here in before but with 2.5 Sqmm (nominal area) FRLS PVC insuated unsheathed multi stranded copper conductor cable for one 3 Pin 15 Amp socket on independent board/ for metal socket industrial plug socket/ 15Amp socket including one 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable green colour 1100 volts grade as earth wire connected to earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 1.5 Sqmm, FRLS PVC insulated unsheathed, multi stranded copper conductor single core FRLS cable, drawn through surface casing/capping, conduit/ existing concealed conduit and accessories and terminated in and including sunken pressed steel terminal switch boxes as specified with plastic laminated bakelite sheet top cover 3 mm thick make hylum fixed with nickel polished brass screws with washers and including 1.5 Sqmm multistranded FRLS PVC insulated unsheathed copper conductor cable connected to earth dolly with all accessories complete for one light point controlled by one switch SP one way including any type of civil work reqd to make good disturbed surfaces.

All as per srl item No 92above but for one fan point controlled by one switch and regulator complete all as specified

All as per srl item No. 92 abovbut for one bell point controlled by one bell push complete all as specified.

All as per srl item No. 92 above but for one socket outlet 5 Amps on same board controlled with one switch complete all as specified.

All as per srl item No. 92 above but for one socket outlet 5 Amps on independent board complete all as specified.

All as per srl item No 92 here in before but with 2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm with stranded copper conductor multi stranded green colour PVC insulated unsheathed FRLS cable 1100 volts grade as earth wire connected to earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge.

S&F in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified.

S&F in replacement switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified.

S&F in replacement socket out let 5 Amp, 5 pin flush type complete all as specified.

M&L in replacement Socket outlet multi purpose 2 in 1, 5/6 pin, 5 & 15 Amps, flush type complete all as specified.

M&L in replacement Bell push switch, flush type 5 Amps, SP, 240 volts complete all as specified.

M&L in replacement Bell electric AC (Ding Dong) 240 volt SP complete all as specified.

S & F in repair for batten holder insulated body with matching colour back plate all as specified and directed.

S&F in repair for ceiling rose surface type bakelite 65 x 50mm, three terminal complete all as specified.

S&F in replacement five step fan regulator, electronic type, single phase, including connection complete all as specified.

S&F in repair Decorative wall mounting light fitting suitable for 09 watt LED lamp complete with glass/polycarbonate shade including 1 x 09 watt LED lamp complete all as specified of make Havells model Havells city 1 or equivalent in crompton/Philips/Bajaj/Polycab.

S & F in repair New generation, 15 Watt LED post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs driver as light source complete all as specified and directed.

M&L for replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 6 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 6.0 Sqmm (as speicifed) complete with any type of civil work involved to make good disturbed surfaces all as specified. NOTE:Two run of 6 sqmm wire and one run of 6 sqmm wire as earth wire including PVC concealed conduit shall be measured as one unit.

M&L for replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 4 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 4.0 Sqmm complete with any type of civil work involved to make good disturbed surfaces all as specified. NOTE:Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire including PVC concealed conduit shall be measured as one unit.

M&L for replacement of sub main wiring with four run of FRLS PVC insulated unsheathed multistranded copper conductor single core cable 6 Sqmm drawn through in and including PVC rigid non metalic concealed conduit (medium grade) and one run of FRLS PVC insulated unsheathed multistranded copper conductor single core cable (green colour) of size 6 sqmm with any type of civil work involved to make good disturbed surfaces complete all as specified. NOTE:- 1. Four run of 6 sqmm wire and one run of 6 sqmm wire as earth wire and PVC concealed conduit shall be measured as one unit. .

Supply and Fix in repair Vertical Loadline DB 4 way with Bus Bars, Neutral Links, blanking plates suitablle for fixing upto 100A MCCB as incommer and MCB for outgoing fixing in wall all as specified and directed.

Supply & fixing in repair MCCB FP 100 Amp, 415 Volts with 16 KA breaking capacity suitable for vertical loadline DB item No 113 all as specified and directed. Note: Make of VTPN/loadline DB and MCCB should be same.

M&L in replacement for sheet metal DB for MCBs, SPN, 8 ways, double door, single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified.

M&L in replacement for sheet metal DB for MCBs, SPN, 12 ways, double door,single phase, with bus bar, neutral bar/ connectors suitable copper thimbles, lugs etc complete all as specified.

Supply & Fix in repair MCB SP 6 to 32 Amps, 10 KA, B curve complete all as specified and directed by Engr-in-charge.

Supply & Fix in repair MCB SPN 40 Amps, 10 KA, B curve complete all as specified and directed by Engr-in-charge.

M&L for replacement of sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 1.5 Sqmm drawn through in and including ERW stove enamelled conduit (medium grade) with all fittings including earth continuity FRLS PVC insulated unsheathed multistranded copper conductor cable 1.5 Sqmm complete for street light poles all as specified. NOTE:Two run of1.5 sqmm wire and one run of 1.5 sqmm wire as earth wire including ERW stove enamelled conduit shall be measured as one unit.

M & L Service connection of 6 Sq mm twin core Weather proof aluminium conductor cable suspended with No 8 SWG GI wire from Pole to service bracket & then to meter/DB complete with provn of porcelain insulators complete all as specified

S & F in repair energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass/ polycarbonate cover and suitable optics for uniform distribution of light 25 watt LED for bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection, surge protection operative on AC supply 170 volts to 270 volts pre-wired complete with GI pipe of 25mm bore and MS clamp duly painted with two coat paint all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and incl GI lead protection pipe of light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved.all as specified and directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

S&F in repair energy saving bulk head luminaries with opal diffuse LED 9 watt 6000 K power factor more than 0.90 IP-65 class-I protection with high efficiency LED electronic driver, surge protection upto 2 KV, operative on 140 volts to 270 volts AC supply complete prewired connection and testing complete all as specified.

Supply & fixing in replacement Deco ultra slim linear LED lighting fixutre with co-extruded polycorbonate body environmental friendly enegy efficent ready to use pack 20 W, LED batten complete all as specified & directed by Engineer-in- charge.

Supply & fixing in replacement Deco ultra slim linear LED lighting fixutre with co-extruded polycorbonate body environmental friendly enegy efficent ready to use pack 9 W LED complete all as specified & directed by Engineer-in- charge.

Supply and fix in repair exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers (superior quality having CRCA frame and aluminium flapers) complete including cutting of hole in wall and making good to disturbed surface, painting to existing colour of surface with any type of civil work included wall all as specified and directed.

Supply and fix in repair Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amps including Top Plug complete all as specified & directed by Engineer-in- charge .

Supply and Fix 2x2 LED, 34 watt luminaire, ultra modern designed architectural which provides soft-light and glare free symmetrical illumination suitable suitable for Armstrong/grid ceiling including provision of PVC insulated sheathed round flexible wire with multi strand copper conductor of size 1.5sqmm 3 core 1100 Volts grade complete all as specified and as directed.

Supply & Fix in repair capacitor 2.5 MFD including necessary connection complete all as specified and directed. Make : Usha/ Epcos/ Havells/ Bajaj/ Tibcon.

Supply & fixing in reapir TPN MCB 63 Amps, 10 KA, C curve complete all as specified and directed by Engr-in-charge.

Supply and Fix in repair TPN double door DB 6 way with Bus Bars, Neutral Links, blanking plates suitable for fixing of TPN upto 63A as incommer and MCB for outgoing fixing in wall all as specified and directed.

Fixing only serviceable light fittings any type and any description obtained from item no 84, including necessary electric connection with round flexible wire with multi stranded copper conductor of size 0.50 sqmm, 3 core, 1100 volts grade complete all as directed.

Supply and Fix in repair PVC casing capping 25mm (ISI marked) all as specified and direccted by Engineer in charge

Supply and Fix in repair PVC conduit medium grade (ISI marked) not less than 20mm dia with saddles at specified distance & accessories all as specified and directed by Engineer in charge

Removing of old burnt winding any type (copper/ aluminium), cleaning stator complete for burnt wiring, carbon residue and rewinding of stator by winding of any type/any make fan/ any stator design ceiling fan of 1200mm sweep with superior quality super enameled winding copper wire of existing specification, gauge and weight with superior quality insulation for satisfactory functioning in presence of JE incharge complete all as directed by Engr-in-Charge

Supply and fixing Ball bearing (No 6201ZZ / 6201 2RS) with rubber/suitable seals/shield on both side for ceiling Fan complete all as specified and as directed (Make : HCH/NBC/TATA/FAG/SKF/NTN

Supply and fixing Ball bearing (No 6202ZZ / 6202 2RS) with rubber/suitable seals/shield on both side for ceiling Fan complete all as specified and as directed (Make : HCH/NBC/ TATA/FAG/SKF/NTN

Supply and Installation of Smart Single Phase Meter with the following specifications: (i) AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt GPRS communication with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED based circuitry. (ii) Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand (iii) Meter should have connect / disconnect functionality operatable from prepaid billing software. (iv) Meter load limit should be settable remotely from the software. (v) The meter should support communication as per IS 15959 (Part 2) 2011. (vi) Meter shall detect First Breath (Power on) and Last gasp (Power Off) condition and communicaton to the software. (vii) The meter should support open communication protocol DLMS with the software. (viii) The system should be able to run in Prepaid or postpaid billing mode as and when required based on defined processes by the department. MAKE : HPL Note:- (a) The meters would carry 05 years warranty. (b) The quoted rate include the cost for configuration & software charges and sync with existing server installed at GE (E) JRC complete and handing over details of newly installed meters & old meter details with meter Sr No, date & date of installation and intial reading

Supply and fixing in repair powder coated sheet metal enclosure indoor type (size width 1200mm, height 900mm,depth 200mm) made out of 2mm thick CRCA sheet having independent compartments suitable for single phase energy meters) and MCB’s provided with front hinged shutters with locking arrangements and clear glass to visualize the meter reading without opening the compartment with sufficient working space in compartment; duly prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of suitable size from bus bar to meter compartment 04 Nos duly crimped with copper thimbles, duly powder coated having one number cable gland for suitable size of LT XLPE/ PVC cable entry at bottom complete all as specified and directed and consisting with the following:- (a) Bus bar for 3 phase 4 wire system of 4 x 100 Amps rated insulated copper strip mounted on resin cast insulators in independent compartment having front open able shutter - One Set. (b) MCCB , four pole, 415 volts, 63 Amps, 10 KA -One No. (c) MCB SPN 63 Amps, 10 KA C-curve-04 Nos. Note:- Existing meters shall be dismantled & re-fixed in panel by contractor and make cable connection properly through LT cable joint with lugs of suitable size rates are deemed to include for the same.

M&L for Pressed steel sunken box of size 4" x 4" fixed flushed in wall inl removing old UNSV box and make good to disturbed surfaces to match existing complete all as specified.

M&L for Pressed steel sunken box of size 7" x 4" fixed flushed in wall inl removing old UNSV box and make good to disturbed surfaces to match existing complete all as specified.

M&L for Pressed steel sunken box of size 10" x 8" fixed flushed in wall inl removing old UNSV box and make good to disturbed surfaces to match existing complete all as specified.

M&L for bakelite plastic laminated sheet duly drilled holes suitabe for sunken box of size 4" x 4" complete fixed with nickel polished screws incl removing connections, taking down existing switch, sockets and accseeories from old plate and re-fixed at new incl duly making connections complete all as specifed and directed.

M&L for bakelite plastic laminated sheet duly drilled holes suitabe for sunken box of size 7" x 4" complete fixed with nickel polished screws incl removing connections, taking down existing switch, sockets and accessories from old plate and re-fixed at new incl duly making connections complete all as specifed and directed.

M&L for bakelite plastic laminated sheet duly drilled holes suitabe for sunken box of size 10" x 8" complete fixed with nickel polished screws, cup washers incl removing connections, taking down existing switch, sockets and accessories from old plate and re-fixed at new incl duly making connections complete all as specifed and directed.

Supply and fixing in repairs thermostat adjustable type suitable for geyser 25/35/50 Ltr capacity complete all as specified and directed

M & L for servicing of AC's split type/ window type of capacity 1 /1.5 / 2.0 TR inner & outer unit of any make, any type cleaning of outdoor condenser unit, indoor unit cooling coil, with chemical solution c-shine or equivalent and high pressure water jet pump, greasing to condensor fan, checking, tightning all electrical connections, washing of air filter, oiling and tightening of all nut, bolts, etc complete all as directed.

Material & labour for charging of refrigerant gas in window type AC 1.5/ 2 Ton capacity to top up up to required pressure complete all as directed.

M&L for refixing of condensed water pipe line of length 2 Mtr min flexible type from cooling unit for drain including necessary clamps, joint reparing with solutions and make it leak proof all as directed.

Supply, laying, jointing and testing XLPE insulated, PVC sheathed , steel strip or wire armoured electric cable 1100 volt grade (heavy duty) with stranded aluminium conductor of size 10 Sqmm, 2 core laid in trenches, in floor, in duct, through pipes/ culvert or along the pole/wall under roads complete all as specified and directed

All as per item No. 150 above but of size 6 Sqmm 2 core

All as per item No. 150 above but of size 25 Sqmm 3½ core

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and getting out complete all as specified and directed by Engineer-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25 cms thick each layer complete all as specified and directed by Engineer-in-Charge.

Removal of surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

Material and labour for sand cushioning with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable and trenches punned down to thickness of 18 cm complete all as specified and directed.(Note: Punned thickness of 18 cm will be measured and paid)

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed by Engineer-in-charge.

Taking down/ out unserviceable UG cables of any cross sectional area, any type, any make from trench/ from wall/pole/pulling through pipe by opening connections and joints including removing pipe, bricks etc of any description from trenches or fixed with walls/ poles, segregating serviceable bricks/ cable cover, cables etc and keep in safe custody for reuse, complete all as specified and directed. Note : Earthwork shall be measured and paid under appropriate items of BOQ.

M&L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thickness buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth strip 32x6 mm as earthing strip by means of GI bolts, nuts, check nuts and washers incl surrounded on all sides by 15cm thick layer of charcoal dust, salt, incl earth strip protected by 40mm dia GI light grade pipe (IS-1239), PCC pit of 1:2:4 & reinforced PCC top cover 50mm thick, earth pit angle frame of size 25mmx25mmx3mm with excavation and earth work in any type of soil, light grade GI watering pipe 20mm dia with funnel and wire-mesh complete all to as shown in electrical plate no 3 of SSR Part I 2009 connected main switch board or as reqd at site all as specified and testing on completion. (Note: The rate quoted include the cost of GI strip & GI protection pipe light 40mm dia bore light grade upto 7.5 metres. PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner . (2) If the results are not found satisfactory, then 2nd earthing will be re-done without any cost payable to Contractor.

Repair/ rectification for street/ security light/ perimeter light/ flood light any type, any make and any capacity against complaints received through telephone or at complaint cell or in person to make the security/ street lights in serviceable & functional condition as intimated by JE in-charge by rectification/ trace out the fault which includes disconnecting connection wire, removing/ taking down of street/ security light fitting from wall/ bldg/ plinth/ LT/ HT PCC/ steel tubular/ swan neck poles/ octagonal poles upto 11 mtr height from ground level or any other location, bring to MES workshop, opening the screws, step opening, diagnosing the fault, connection wire or any other part in presence of JE (E/M) or deptt rep etc, cleaning of light fitting/ glass/ acrylic cover, re-assembling, testing for functioning, shifting back to site and re-fixing on GI pipe bracket/ wall/ pole after repair, making necessary connections or tightening of loose connection on ACSR conductor/ in bar chamber/ in DB, including any type of repair in timer, switch box as required to make the light fitting functional. The replacement of parts i.e. driver, SPD, LED lamp, LED panel, MCB contactor, or any other part if required shall be measured and paid separately as supply & fixing under relevant item of BOQ.

S&F in replacement CVCC type, BIS marked electronic driver duly enclosed potted LED driver having protection against over voltage, short circuit and open circuit , voltage band 150 volts to 270 volt (min), Efficacy > 100 lm/W power factor 0.90 suitable for compartment of existing LED street light of capacity 42W to 45 W complete all as specified and directed. Note: i) Make for item S No 161 to 164 : OSRAM/PHILIPS/POLYCAB/CROMPTON /SURUYA/ BAJAJ/ ORIENT/ HAVELLS/KCSAD (ii) The contractor shall have to procure the suitable driver of compact size to ensure easily fit for exising LED light fittings,No claim of contractor will be entertaint on this account.

Ditto as per item No 161 above but of capacity 60 to 72 watt.

Ditto as per item No 161 above but of capacity 90 to 120 watt.

S & F SPD 10 KV min (surge Protection Device) suitable for street light / Flood light fitting for avoid surge protection voltage all as specified and directed by Engineer -in -Charge.

Supply & Fix Astronomical Digital timer switch for switching on/off lights according to rising/setting of the sun with combination function for creating switching programs in which devices are switched according to astronomical time and/ or fixed preset time, current capacity 16A, weekly program with 1 changeover (1 CO), Total 28 programs min complete in powder coated CRCA sheet enclosure of suitable thickness with MCB TPN 32 Amp min, 3 pole contactor 32 Amp and MCB for manual switching of lights, fixing arrangement i.e. DIN rail complete with necessary porcelain insulator for incoming and outgoing cable connections with reqd clamp duly painted to fix on pole complete all as specified and directed. Make of timer switch : Indoasian / Siemens /Schneider/ L&T/ Legrand/Havells/GIC

S&F junction box complete with fixing accessories. The Junction Box shall be insulated and made out of Polycarbonate/Thermoplastic with glass fiber reinforced. The Polycarbonate J. Box shall be environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anti corrosive. The Junction Box Mini. Size 160 x 200 x 98mm minimum. The Junction Box with Knock out on four side wall. The Junction Box shall be rated for Degree of Ingress Protection IP 65 in accordance with IEC 60670. The gasket material shall be Polyurethane and the gasket shall be internally embedded. The Junction Box shall have one number 10 Amp MCB SP 10KA. Make :- Cat Part No. KM 9250 Hensel,/ Schneider/GE Power/ABB.

M & L only for cutting / Pruning of tree branches 1.5 mtr all around the LT overhead lines of span not exceeding 50 mtr and around the pole obstructing the overhead line & removing/ disposing the branches to a distance not exceeding 200 mtrs to the entire satisfaction of Engineer-in-Charge. Note – The rate quoted include any type of T & P i.e. ladder,cutting machine,cutting axe/ Tools etc required at site.

Restretching of existing loose OH, LT ACSR conductor wire span any type/ any supply including GI wire along the span of pole having 2 to 6 wire for sagging within the permissible limit, including disconnecting cable connections, opening of binding wire, winding/ rewinding/joining with aluminium winding wire in case of breakage of conductor and restringing at same place as same phase or changing the location to use as neutral or other phase complete as directed and again fixing to insulators with binding wire and making outgoing electric cable connections. The Size of binding wire of same size as made up of conductor complete all as specified and directed by Engr in charge. Note : (i) Nothing extra is admissible on account of jointing material and labour in case the conductor breaks during stretching. (ii) Cutting trimming of hanging/extended branches of trees upto a distrance 1.5 mtr from/ over the overhead HT/LT line and making the line clear upto the entire length of the restretched ACSR feeder including removal and disposing of the cut tree/branches 200 mtr away for the site as directed is deemed to be included in the quoted rate. (iii) Piece of conductor of suitable size required for connecting the broken conductor to make joint shall deemed to be included in the rates quoted by the contractor. (iv) All number Qty of ACSR conductor incl earth wire in a span shall be measured as a one unit only.

M&L for painting of cross arms 0.60 mtr long with clamps in position on 9/11 Mtr long pole with two caot of aluminium oxide incl preperation of old painted surface complete all as specified & directed.

Disconnecting XLPE/PVC insulated armoured aluminium conductor cable connection fom ACSR, removing from the pole and S&F end termination outdoor heat shrinkable joint suitable for 35 to 50 Sqmm,3.5/ 4 core PVC/XLPE cable and refixing the cable along with pole and making the connection with ACSR conductor complete all as specified & directed. Note: The rate also include the cost for removing of loop from ground after necessary excavation and stretching out the loop and necessary earth work to take out and burry the loop of cable.

M&L Replacement of PVC insulated PVC sheathed copper conductor cabe of 0.75 Sqmm, 3 core complete for street light and making connections all as specifed and directed.

Supply & fixing 1100 volts grade heavy duty PVC insulated & PVC sheathed stranded aluminium conductor of size 10 sqmm twin core flat cable in service incl Taking down/ out unserviceable conductor connection all as directed.

M & L for boring hole under the road / pavement / hard standing with the help of trenchless technology using ultra sound technique and necessary machine for inserting GI Pipe up to 50mm mm not less than one metre below ground level complete all as specified & directed by Engineer-in-charge. (Note: The GI pipe shall be measured and paid separately.)

M& L for Cutting chases in road/ hardstanding upto depth of 100mm to 150 mm min in cutting holes through walls /earth surface for inserting GI/HDPE Pipe up to 100mm bore mm not less than one metre below ground level complete all as specified & directed by Engineer-in-charge. (Note: The GI/HDPE pipe shall be measured and paid separately.)

S & F LED street light fitting 45 watts,made up of pressure die-cast aluminium housing with toughened glass/PC embedded lens with mandatory secondary optics lenses, with SS screws, IP-66, luminaire efficacy 100Lm/W min, overall 4500 lumens min, CCT 5700K ANSI, CRI>70, THD<10%, PF >0.95, LED source : Hi power LED 3 to 5W, having external potted Constant Current driver moisture resistant with internal surge protection 4KV having under voltage, over voltage, phase to phase protection and short circuit protection and auto recovery mode, operating range 150 V to 270 V AC at 50Hz, Auto Cut off >300 V and with separate external Surge protection device 10 KV, suitable for fitting on 40 mm dia bore pipe bracket including making connections with PVC insulated 3 core copper conductor cable 0.75 Sqmm min of suitable length complete all as specified. Note - The contractor shall ensure the light fitting dia should be suitable for 40 mm dia bore pipe. contractor shall quote his rate accordiangly.

S & F LED street light fitting 60 watts,made up of pressure die-cast aluminium housing with toughened glass/PC embedded lens with Pressure Die Cast Aluminium Housing with mandatory secondary optics lenses, with SS screws, IP-66, luminaire efficacy more than 100 Lm/W min, CCT 5700K ANSI, CRI>70, THD<10%, PF >0.95, LED source : Hi power LED 3 to 5W, having external potted Constant Current driver moisture resistant (installed in separate independent compartment) with internal surge protection 4KV having under voltage, over voltage, phase to phase protection and short circuit protection and auto recovery mode, operating range 150 V to 270 V AC at 50Hz, Auto Cut off >300 V and with separate external Surge protection device 10 KV suitable for fitting on 40 mm dia bore pipe bracket including making connections with PVC insulated 3 core copper conductor cable 0.75 Sqmm min of suitable length complete all as specified.

Supply and fixing in replacement bracket made out of 25 mm dia bore GI pipe light grade tubing 1.2 metre long, and bent to shape at 120 degree angle with reqd holes for passing connection cable, fixed with clamps nuts and bolts, washer complete all as specified . (Clamps, nut, bolts and washers will be measured and paid separately).

Supply and fixing in replacement MS cross arms, bracing, supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending, cold or hot, drilling holes or bolt in any shape or size including 2 coats of aluminium paint over a coat of red oxide primer including dismantling/ taking down existing MS work complete all as specified and directed. Note: Unexposed surface shall be given one coat of primer only.

Supplying, erecting and fixing Pressed concrete poles 09 meter long 102 x 172 at top and 102 x 279 mm at bottom class 10 complete as specified including painting of poles upto 1.5 mtr height from coping with two coats of synthetic enamel paint black & white strips and numbering of poles as directed complete all as specified and directed. (PCC and earth work shall be measured & paid for separately).

Material & Labour for PCC work (1:4:8) type D-2 using 40 mm graded stone aggregate in foundation of electric pole, etc. including necessary form work and fare finish to exposed surfaces without using extra cement etc. complete all as specified.

Supply & Fixing energey saving, 5 star rating ceiling fan BLDC type of 1200mm sweep, 230V complete with all accessories (without remote type) all as specified and as directed by Engineer-in-Charge. Make: Havells/USHA/ Khaitan/Orient/Bajaj/ Crompton

Supply and fix GI pipe 50 mm bore light grade for protection of cable including provn of PVC heavy duty bends complete for fixing along GI pipe along wall/ pole/laid under the road/ floor complete all as specified and directred by Engr-in-Charge.

Supply, install, testing and commissioning of Feeder pillar, outdoor cubicle type weather and vermin proof totally enclosed made out of 3.15 mm thick CRCA sheet machine pressed compartmentized duly powder coated with 7 tank process of size 1800mm x 1500mm x 500mm min, operate on 3 phase 4 wire system , 415 volts, 50 Hz double door with front and rear hinged (bottle type) openable shutters with locking arrangement & sliding bolt on both sides with legs stands frame made out of angle iron of size 50mm x 50 mm x 6mm of height 750mm, having inner hinged shutters on all independent compartments for switch gears, metering units and bus bar, bottom gland plate for each incoming & outgoing cable of suitable size as per cable's size having openable apron on 3 sides of panel from base to ground level, prewired complete duly grouted in 30 cm in PCC (1:3:6) type C-1 including all as directed by Engr-in-Charge comprising with following complete. (NOTE: On panel front and rear side should be properly mentioned with red enamel paint of proper size of word. LT panel shall have sliding bolt on front and rear door. Lt panel shal have total 4 leafs (each leaf shall have minimum three hinges).

(i) Bus bar of copper strip, of rating 350 Amps based on 1.5 Amps per sqmm duly insulated with coloured (Red, Yellow, Blue and Black) heat shrinkable sleaves, suitable for 3 phase, 415 Volt, 50 c/s and 4 wire system mounted on resin cast insulators with GI nut, bolts and washers etc, fully enclosed in individual compartment. (ii) INCOMING : - (a) MCCB 315 Amp, 415 V, 36 KA, 4 pole with Microprocessor release, Ics = 100% Icu -01 No. with suitable shunt tripcoil to control tripping through MDI control relay (b) Mutifunction meter with LCD display , accuracy class 1.0, having parameters KW, KWh & PF, duly prewired with suitable size of copper insulated FRLS wire with universal code including suitable CTs complete. (c) Panel type Enery meter to record Energy consumed with set of CTs (d) Indicator with neon lamps for RYB, 3 Phase - 01 set (e) Automatic power factor controller relay having 6 steps minimum to automatic energize capacitor - 01 No Make of relay : Havells/ C&S/ Schneider/ L&T/ Siemens (iii) OUTGOING:- (a) MCCB 100 Amp, 415 V, 25 KA, 4 pole with adjustable thermal magnetic release Ics = 100% Icu - 03 Nos. (b) MCCB 63 Amp, 415 V, 25 KA, 4 pole with thermal magnetic release Ics = 100% Icu -02 Nos.

(c) MCCB 40 Amp, 415 V, 16 KA, 4 pole with fixed thermal magnetic release Ics = 100% Icu -01 Nos. (d) Astronomical time switch complete with contactor 3 pole, 32 Amp rating, MCB TPN 32 Amp and SP MCB 32 Amp to manual override the timer - 01 Set (e) Capacitor bank having Heavy duty Cylindrical capacitor, 440V, 50 Hz, 3 phase of cap 25 kVAr -02 Nos, 15 kVAr -01 No, 10 kVAr - 01 No and 5 kVAr - 01 No each having necessary connections with relay for automatic operation (f) smart load manager relay/ MDI control relay/ CMD control relay to control Max demand wirh reqd set of CT's-01 no wiht necessary connection to main MCCB to control tripping.

NATIONAL BUILDERS (BID ID -3166666)