Internal Electrification of 02 nos of wards/corridor

Amount

Suply and installation of integral LED 4ft luminarie with CRCA housing and PC Glossy Cover.The luminarie should have a color consistency SDCM < 5,CRI> 80 and CCT of 6500K.The luminarie shall be compliant with IP 20 classification. Luminarie shall be designed to emitt at least 4000 nominal lumens at a system efficacy of attleast 115 lumens / watt with a maximum wattage of 34watts.The luminarie shall be designed so as to ensure lumen depriciation of upto 30% over 50K burning hours @ design ambient temp 45deg C. The electronic driver used shall have a power factor > 0.95 and THD < 10% and suitable for an operating voltage range of 140-270 V AC.The LED driver should comply to IEC 61000-3-2, 2009 for Harmonics, IEC61347-2-13<2006 in conjuction with IEC61347-1 ed.2.0, 2007 for Electrical safety, IEC62384 ed 1.1, 2011 for perfofmance and IEC 61547 ed 2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse Lab. approved by NABL or ministry of Science of Govt. of India. LM79 & LM 80 reports need to be submitted from a NABL/ UL accredited lab to verify above parameters

Supply, Installation of LED indoor (Surface / Recessed) Downlighter suitable for general lighting. Luminarie with CRCA body and poly carbonate cover with diffused optics.The luminarie should have CRI>80 and CCT of 3000K/ 4000k/ 6500K. The luminarie shall be compilant with IP20 classification.The fixture should have a minimum system efficacy of100 lumens/watt and a minimum system lumen output of 1200 lumen and a maximum system wattage of 12 watts.The luminarie shall be designed so as to ensure a lumen deprication of upto 30% over 50K burning hours @ design ambieent temp 45deg C.The electronic driver used shall have a power factor>0.95,THD<10%.The fixture should comply with the parameters as per ISI 0322. The LED driver should comply to IEC 61000-3-2, 2009 for Harmonics, IEC61347-2-13<2006 in conjuction with IEC61347-1 ed.2.0, 2007 for Electrical safety,IEC62384 ed 1.1, 2011 for perfofmance and IEC 61547 ed 2.0, 2009, CISPR-15 for EMI. Manufacturer shall have inhouse Lab. approved by NABL or ministry of Science of Govt, of india.LM79 & LM 80 reports need to be submitted from a NABL/ UL accredited lab to verify above paramete

Supply and fixing of 6-16 SP Amp MCB legrand make

Supply and fixing of 40/63 Amp DP MCB legrand make

Wiring for circuits/submains alng with Earth wire with the following sizes of FRLS PVC insulated copper conductor single core cables in surface / recessed medium class PVC conduit as required.

2 x 2.5 sqmm + 1 no.2.5sqmm pvc insulated copper conductor

2 x 6 sqmm + 1 no.6 sqmm pvc insulated copper conductor

2 x 10 sqmm + 1 no.6 sqmm pvc insulated copper conductor

Supply and fixing of following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required

5/6 Amp switch

3 pin 5 / 6 Amp Socket outlet

15/16 Amp switch

6 pin 15/16 Amp Socket outlet

Supply,Installation,testing and Commissioning of Cubical type L.T Panel board suitable for 415V 3phase 4wire 50HZ AC supply system including incomers, outgoings, bus-bar, interlocking etc, dust & vermin proof with lockable arrangement, powder coated INCOMERS MCCB 250 Amp 4 Pole with breaking capacity 36 KA 1N0 Digital multifunctional-meter 1 no Indicating Lamps ( RYB ) 1 set Current-Transformer ( 300/5A 10VA burden) class-1 1set Aluminium bus-bar 400 Amp FP E-91 Electrolutic AL 1sets. 200A change over switch Panel Mount :1 No. Out-Goings MCCB100 Amp 4POLE MCCB with Breaking capacity 36 KA 2Nos MCB 80 Amp DP with Breaking capacity 10 KA 6 Nos MCB 63 Amp DP with Breaking capacity 10 KA 6 Nos MCB 40 Amp DP with Breaking capacity 10 KA 4 Nos Load Bearing Member to be made out of 16SWG CRCA Sheet Partition to be made out of 16SWG CRCA Sheet Gland Plates to be made16 SWGmm thick Complete job.

Earthing with G.I Earth Plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal / coke and salt as required

Providing & laying of 25mmx5mm G.I strip fpr earthing in 40mm dia pipe FRL earth Electrode including connections with brass nuts, bolts spring washers etc, excuvation, refilling as required

M/s AHKHAN ENTERPRISES

M/s AHMADULLA AND SONS