SPECIAL REPAIR TO BLDG NO T-109, T-2A AND ENP-08 INCLUDING CERTAIN REVENUE WORK UNDER AGE BR-II OF GE (WEST) PATHANKOT

Amount

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) nluding cement concrete tile/chequred tile if any complete all as specified and as directed.

Dismantling of floor hearth and wall tiling incl cement morter bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using(20mm graded stone aggregate )as in plinth protection, path & hardstanding, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for plain Cement concrete 1:4:8, type D-2, (40mm graded crushed stone aggregate), 75mm thick as in sub base complete all as specified and as directed.

M & L for vitrified ceramic tiles light shade 10mm thick (square/ rectangular) polished area of each tiles n. exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M & L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles n. exc 0.36 Sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as in skirting/dado including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

M & L for coloured joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and as directed.

M & L for coloured Glazed ceramic tiles in vertical surfaces 450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed.

M & L for chequred cement concrete designer tiles 30 cm x 30 cm x 25mm thick rubrised, glossy finish, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20mm thick secreed bed or bedding in CM 1:6 complete all as specified and as directed.

M & L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over and including 15cm beding layer in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Demolition of stone/brick masonry in CM or cement/ lime mortar complete all as specified and as directed.

M & L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and as directed.

M & L for brick work with sub class ‘B’ burnt old size brick, straight or curved on plan exc 6.0 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surface in CM 1:6, surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth (without using extra cement) on fair face of brick surface complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6, surfaces finished even and smooth (without using extra cement) including taking down old plaster on brick or stone wall complete all as specified and as directed.

M & L for rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) including taking down old plaster complete all as specified and as directed.

M & L for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, in cover slabs( for manholes etc.)chulla hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:6) including demolition of old reinforced cement concrete with tile complete all as specified and directed. (Reinforcement shall be measured and paid separately).

M&L for Mild steel TMT bar 10mm over dia including all cutting bending binding cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

Taking down chowkat or frames with shutter (W/O taking of shutter from the frame) area exc 1.5 Sqm but n. exc 4.0 sqm each complete all as specified and as directed.

Taking down chowkat or frames with shutter (W/O taking of shutter from the frame) area nexc 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 sqm & but not exc 2.0 sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1.0 sqm & but not exc 2.0 sqm each and refixing in other/same opening incuding easing and adjusting complete all as specified and as directed.

S & F pressed steel frame of size 165 x 60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc and tarring to the back side of the frame & hold fasts complete all as specified and as directed.

S & F 35 mm thick factory made second class hardwood rail and style plain framed panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as directed and specified.

S & F 35 mm thick factory made second class hardwood glazed /gauzed and skelton door shutters, open rebated & prepared to recive glass/ gauged etc as in mosquito proof door shutter etc with out sash bars, edges of framing plain, chamfered or rounded,fitted with cut & mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part I section 8, clasue 8.20(a) and fixed to chowkats complete all as specified and as directed.

S & F MS barrel tower bolt 200mm long stove enameled black with bright bolt complete all as specified and as directed.

S&F MS pressed handle oval type, stove enamelled black 150mm size complete all as specified and as directed.

S & F door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300mm long complete all as specified and as directed.

S & F MS Sliding door bolts 300mm long stove enameled black with bright bolt not less than 12mm dia with and incl a min 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and as directed.

S & F second class HW small fittings such as brackets of any type, latch and hinge blocks, brackets of any type, latch & hinge blocks, shaped door and window stops ad the like including al necessary labours articles n.exc 200 cucm each complete all as specified and as directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. (mimimum thickness of powder coating 50 micron).

S & F powder coated anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 150mm long 2 Nos and hinges type B-21, 100mm long 3Nos in each door shutter, anodised aluminum snap beading screws etc. complete all as specified and as directed.

S & F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed.

S & F aluminium powder coated grills for windows and ventilators; design and pattern complete all as specified and as directed.

S & F sheet glass 5.0 mm thick, ordinary quality and glazing with oil putty in square complete all as specified and as directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples complete all as specified and as directed.

M & L door closer aluminium (extruded section body) hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed.

M & L double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

S & F 2 lever brass mortice lock, vertical type, size 100 mm complete all as specified and as directed.

S & F 12mm thick toughened sheet glass as in frameless door and partitions, including edge moulding, cutting etc. complete all as specified and as directed.

S & F stainless steel top patch fitting/side panel patch fitting with pivot of suitable size complete all as specified and as directed.

S & F of stainless steel bottom patch fitting of suitable size complete all as specified and as directed.

S & F of stainless steel wall to glass connecting patch complete all as specified and as directed.

S & F of stainless steel centre patch lock double sided of suitable size complete all as specified and as directed.

S & F of stainless steel back to back handle of 25mm dia and 450mm long complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be coucred with heat moulded wood grain printed PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side as gap insert for top rail bottom rail panelling of wood grain printed PVC sheet to be fited in the MS frame welded/seald to the stiles & rails with suitable PVC sheet beading and jointed together with saluent cement suppling & fixed in the framed site as per specification & drawing.

S & F of PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet reiforced with MS squre tube as per specification and drawing complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts of extruded section 125mm long complete all as specified and as directed.

S & F Aluminium handles cast type anodised of 125mm complete all as specified and as directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 100mm size complete all as specified and as directed.

S & F in repairs stainless steel curtain rod 20 mm dia, 1mm thick with 6 Nos of PVC ring, heavy duty, per meter length will be provided as approver by GE complete all as specified and as directed.

S & F in repairs stainless steel curtain rod brackets with fancy type stainless steel funnel heavy duty suitable for 20mm dia rod complete as approver by GE complete all as specified and as directed.

Taking down eves gutter and rain water pipes (any size or pattern), including all fittings, head shoes, bends, swan-necks atc., incl cleaning or refixing or removal to store (mesured overall as fixed along the centre line over fittings the accessories) complete all as specified and as directed.

S & F PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75 mm bore complete all as specified and as directed.

S & F PVC (SWR) 110mm bore 'T' equal or unequal with access door complete all as specified and as directed.

S & F PVC (SWR) 75mm bore 'T' equal or unequal complete all as specified and directed.

S & F PVC (SWR) bend, ISI marked, any radius of 110mm bore complete all as specified and directed.

S & F PVC (SWR) bends any radius, 75 mm bore complete all as specified and as directed.

S & F PVC (SWR) 110mm bore vent cowl complete all as specified and directed.

S & F 75mm PVC floor trap with gratings incl jointing to waste pipe fixed in solvent cement complete all as specified and as directed.

Taking up or down steel tubing and connections 15mm bore incluidng removal complete all as specified and as directed.

All as per srl item No. 68.00 here-in-before but 20mm bore complete.

S&F tubes 15mm bore medium grade galvansied with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S & F tubes 20mm bore medium grade galvansied with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and as directed.

S & F in repairs vitreous china wash down water closet pan (Pedestal Pattern ) white including fixing bolts, plastic water closet seat, white, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete and including making good to floor to match with adjoining surfaces complete all as specified and as directed

S & F in repairs PVC 10 ltrs capacity valveless symphonic action type low level flushing cistern including flush pipe, cantilever brackets incluiding taking down existing cistern etc complete all as specified and as directed.

Supply and fixing in repairs vitreous china full pedestal wash basin with fixing accessories, white of size 565 x 440 x 210 mm, incl 32mm dia brass chromium plated waste coupling (Make :ALD-705) and cast iron brackets complete all as specified and as directed Make : FLS-WHT-5801 of Jaquar or equivalent in any make mentioned in list of product.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding, making good to floor and all fittings (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S & F in repairs Wash basins, Vitreous China (flat back type) 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand , waste pipe etc complete all as specified and as directed.

Supply and fixed in repairs Pillar taps fancy type cast copper alloy chromium plated with capstan head without letter Hot or Cold water screwed down for 15 mm dia iron pipe complete all as specified and as directed.

Supply and fixed in repair stop valve/angle cock fancy type cast copper alloy, chromium plated with capstan head serewed down for 15 mm dia iron pipe complete all as specified and as directed.

S & F in repairs 15mm bore dia of pipe bib taps cast copper alloy, fancy type chromium plated, with capstan head screwed down, screwed for iron pipe or brass ferrule and fixed in repair complete all as specified and as directed.

S & F in repairs Brass chromium plated angular stop cock with wall flange screwed for 15mm dia bore iron pipe complete all as specified and directad. Make: FLR-5053N of Jaquar or equivalent in any make mentioned in list of product.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repairs CP Grating with hole /with out hole of dia 125 mm complete all as directed in repairs complete all as specified and as directed.

S & F looking mirror of size 900mm x 600mm, 4.0 mm thick mounted on 6mm thick plywood/asbestos sheet building board complete all as specified and as directed.

S & F in repair corner glass shelf with bracket complete all as specified and as directed. Make : ACN-1173 of Jaquar or equivalent in any make mentioned in list of product.

S & F in repairs brass chromium plated single towel rail 600mm long complete all as specified and as directed. Make : ACN - 1111 SM of Jaquaror equivalent in any make mentioned in list of product.

Supply and fix in repairs 15mm bore brass chromium plated wall mixer with provn of overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges for mixing hot and cold water, screwed down complete all as specified and as directed. Make : FLR -5219N of Jaquar or equivalent in any make mentioned in list of product.

Supply and fix in repairs 15mm bore brass chromium plated centre hole basin mixer without popup waste system with 450mm long braided hoses, screwed down complete all as specified and as directed. Make : FLR -5167NB of Jaquar or equivalent in any make mentioned in list of product.

S & F in repairs overhead shower 100mm dia round shape single flow (ABS Body chrome plated with grey face plate) with rubit cleaning system complete all as specified and as directed. Make : OHS-1989 of JJaquar or equivalent in any make mentioned in list of product.

S & F in repair wall mounted shower arms casted 190mm long light body round shape with flange complete all as specified and as directed. Make : SHA-477 of Jaquar or equivalent in any make mentioned in list of product.

S & F in repairs brass chromium plated health faucet with 1m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe or 2 in one tap make: ALD -563 Jaquar or equivalent in any make mentioned in list of product.

S & F stainless steel jet with 1.0m long flexible PVC tube suitable to fix in the pedestal pan closet complete all as specified and as directed. Make: Cat No BEA-17 of Prayag or equivalent in any make mentioned in list of product.

S & F in repairs sinks made of stainless steel 1 mm thick kitchen with plugs washers and wastes, including bedding in cement mortor to dwarf wall or cantilever brackets and connecting union to pipe of size 610mmx460mmx254mm complete all as specified and as directed.

M & L for preparation of new plastered/unplastered/ scraped/smooth surfaces of wall/ceiling and applying two coat of distemper oil emulsion complete all as specified and as directed.

M & L for applying 1mm thick wall care putty finish in two coats (each coat shall be 1mm thick) on new plastered/unplastered/ scraped surfaces of wall/ceiling complete all as specified and as directed.

M & L for preparation of new plastered surfaces of wall and apply two coat of cement base paint over and including a coat of chalk whiting complete all as specified and as directed.

M & L for complete removal of existing treatment of wall, preparation of surface and apply two coat of cement base paint over and including a coat of chalk whiting complete all as specified and as directed.

M & L applying two coats of synthetic enamelled paint over and including a coat of pink primer over wood & wood based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and as directed.

M & L for preparation of new or previously untreated surfaces of steel of any des-cription, over 10cm in width or grith and applying two coat of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed.

Material and labour for preparation of old painted steel and iron surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M & L for preparation of new or previously untreated surfaces of steel of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coat of synthetic enamel paint over and including a coat of primer complete all as specified and as directed.

Dismantling water tanks and removing (exc 250 and not exc 500 ltr capacity) complete all as specified and as directed.

M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) ISI marked, triple layered hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete all as specified and as directed.

S & F in repairs 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms) complete all as specified and as directed.

S & F in repair gun metal globe or gate valve for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, plup, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S & F for suspended false ceiling system using chicago metallic (E grid)exposed supended system, grid section size 600mm x 600mm comprising of GI powder coated Main Runner T-section of dimensions 39 mm x 24mm x 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mmx24mmx0.8mm thick and wall angle 22.2mmx22.2mmx 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip) hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture complete all as specified and as directed.

S & F solid PVC wall lining consisting of 5mm thick plain/ colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. (Note:- PVC frame shall be measured and paid separately.)

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC frame as per specification and drawing complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

M & L Block board 18/19 mm thick, grade 2 quality, interior grade, commercial type complete all as specified and as directed.

M & L decorative laminates 0.9mm thick type I, or surface finish, colour and pattern as approved complete all as specified and as directed.

S & F 30mm wide continuous (piano) hinges, mild steel, bright finish or electroglavanised complete all as specified and as directed.

S & F 150 mm extruded brass handles, fabricated type, polished bright complete all as specified and as directed.

S & F 100mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

M & L for 2nd cl softwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads,sectional area not exc 3 sq cm complete all as specified and as directed.

Dismantling of AC corrugated or semi corrugated sheeting in roof including ridges etc complete all as specified and as directed.

Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position ( unframed ) as in purlins complete all as specified and as directed.

S & F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, etc. fixed with self tapping screws complete all as specified and as directed.

S & F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall and as in ridge etc fixed with self tapping screws complete all as specified and as directed.

S & F plain galvanised mild steel sheeting 0.80 mm thick, in ridges, hips, valley gutters, drip and straight flashings(length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

S & F hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc,) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe410-0 or Fe 310-0 complete all as specified and as directed.

S & F mild steel work in tubular trusses (framed) /rectangular hollow section, purlines and fastening including distance pieces etc. including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

S & F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W(Gde E-250) quality -A complete all as specified and as directed.

S & F mild steel bolts of dia exc12mm but n. exc 20mm, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each scre-wed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and as directed.

S & F mild steel screw bolts (machine made) 11 to 15 mm dia of neck with hexagonal or square heads one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut ex. 5 cm and n exc 10cm long complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/hard soil complete all as specified and as directed.

M & L excavation in post holes (or similar holes) each n. exc 0.5 cum, getting out in soft/hard soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing of surplus soil complete all as specified and as directed.

Excavation in treanches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells exc 10 sqm on plan and getting out any type of soil complete all as specified and as directed.

M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation & mass concrete complete all as specified and as directed.

M & L PCC 1:2:4 type B-2 ( 40mm graded stone aggregate ) in fdn filling and mass concrete complete all as specified and as directed.

M & L machine pressed precast concrete interlocking paver block rubberised, glossy finish any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed.

M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M & L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed in kerb/coping including necessary form work complete all as specified and as directed.

Returning, filling in, excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Taking down old unserviceable/damaged point wiring carefully of any size and description on teakwood batten / through pipe (light, fan, socket etc) incl removal of battens, pipes, sockets, switches, shades, ceiling fittings, bulk head fittings ceiling rose etc complete and making good disturbed portion of wall to match with the existing surface all as specified and directed.

M & L for point wiring for one light/one fan controlled by one switch with 1.5 PVC insulated unsheathed multistrand copper conductor FRLS cable with and including rigid PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodised pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained. (Ph-Red, N-Black, Half -Yellow, Earth- Green).

All as per Srl item No 141.00 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.

All as per Srl item No 141.00 here-in-before but for 5 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M & L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodised pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green).

S & F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin 5 amps flush type 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

Supply and fixing ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed.

S & F energy saving new generation LED 10 Watts, 6000 K, IP -65 bulk head luminarie with opal diffuser complete including connecting electrically using cord flexible 3 core copper flexible cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings . Note power factor should not be less than 0.95. Make:- Crompton Cat Ref LBHP-10-CDL or Technocommercially equivalent in any of the make mentioned in list of products. Note:- (i) Contractor shall produce LM79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall give guarantee/ warranty of complete fitting/ fixture for minimum 2 years from the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of the material at no extra cost. (iv) Contractor shall arrange complete material at site for approval of GE before incorporation in the work.

S & F of CFLs with LED Lamp, B22 type ,14 watt,complete all as specified and directed.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the same for distrubed surfaces as per existing complete all as spd and supply and fixing in replacement PVC type AC Ventillation fans, Single phase, copper winding 230 volts 150 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the same for distrubed surfaces as per existing complete all as spd and supply and fixing in replacement PVC type AC Ventillation fans, Single phase, copper winding 230 volts 250 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed.

S & F energy saving decorative LED box type (4 Feet), 230 volts, light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as spd and directed by Engr -in -charge.Make of LED Fitting:- CROMPTON DMLN1LT8-16 or Technocommercially equivalent in any of the make mentioned in list of products.

S & F energy saving LED Rod 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light complete all as spd and directed. Make of LED Rod:- CROMPTON LTT8-20 or Technocommercially equivalent in any of the make mentioned in list of products.

S & F Sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed

M & L MCB SP 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, 'C' curve including providing thimble for out going cables complete all as specified and directed.

M & L MCB SPN 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, 'C' curve including providing thimble for out going cables complete all as specified and directed.

S&F in replacement sub Main Wiring with two PVC insulated unsheathed multistrand flexible copper conductor cable of size 2x4 sqmm and one PVC insulated multistrand unsheathed flexible copper conductor 4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed .

S & F in replacement of Sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB FOUR POLE 100 AMPS AC 415 VOLTS 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing (Note :- (i)The DB shall be VTPN series of Schenieder Cat Part No:- A9HVD04L or equivalent in any of the make mentioned in list of product . (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped.(1v) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (vi)MCCB's and MCB's should have a same make as of DB.

S & F bldg secuirty light fitting energy saving high efficiency LED street light fitting 25 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia light grade bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed. Make: Crompton cat Part No.- LSTS-25-CDL or Technocommercially equivalent in any of the make mentioned in list of products.

S&F sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed. Make: Crompton cat Part No.- LCL-07-CDL or Technocommercially equivalent in any of the make mentioned in list of products.

S & F of Recess/Surface mounted LED Flat panel 2x2, 36 watt Deep Drawn CRCA sheet syeel housing duly powder coated with high efficient LEDs & glare full opal diffuer, IP20 to ensure glare free & even distribution of light. Make :- Crompton Cat Part No: LCTLSN-36-CDL or Technocommercially equivalent in any of the make mentioned in list of products.

S & F of Decorative Gate Light Moon Opal made up of high Grade unbreakable polycarbonate material suitable for and including 12/20 Watt LED Bulb complete all as specified and directed by Engr-in-charge. Make Havells :- Cat Part No:- LHFXBON1TN5Q020 or Technocommercially equivalent in any of the make mentioned in list of products

M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate 15cm thick alround and PCC pit in PCC 1:2:4 and RCC cover precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed. (Note: Excavation and earth work is deemed to be included in the rates quoted).

S&F Storage type Electric water heater (Geyser) capacity 25 litrs BEE 5 Star rating with complete accesoiries complete all as specified and directed.

S&F stop valves, cast copper alloy, screwed down, high pressure with crutcher butterfly handle, screwed both ends for 15mm bore dia of pipe complete all as specified and directed.

S& F Bib taps cast copper alloy, with crutch of butter fly handle, screwed for 15mm dia pipe complete all as specified and directed.

S&F GI pipe 15mm (1/2") dia, medium Grade complete including fittings laid in floor, along with wall/ceiling etc complete all as specified and directed.

S&F PVC connection for hot & cold water 15mm dia 450 mm long with brass adaptors complete all as specified and directed.

S & F Sheet metal enclosure with sheet metal enclosure MCB distribution board single pole and neutral with a two pin and earth plug and socket 20 amps 240 volts, complete with one single pole MCB of 20 amps 'C' curve complete all as specified and directed

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 46814.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249.

M/S PREMI CONSTRUCTION CO

JP AND CO.

GANDOTRA CONSTRUCTION CO

Alishan Builders

kay gee construction co

INDERJIT SINGH

MEHTA BUILDERS