Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹5.7 LAdmitted-Finance CHENAB VALLEY DIVISION HPPWD UDAIPUR HIMACHAL PRADESH | CHAMBA | HIMACHAL PRADESH | 176207 | -9.20% | ₹5.7 L | L1 | Admitted-Finance |
| 2 | L2₹6.2 L+₹51,665.58 (9.03%)Admitted-Finance | -1.00% | ₹6.2 L+₹51,665.58 (9.03%) | L2 | Admitted-Finance |
| 3 | L3₹6.5 L+₹80,018.64 (14.0%)Admitted-Finance | +3.50% | ₹6.5 L+₹80,018.64 (14.0%) | L3 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹12,610
Closing Date
17 Sept 2026, 9:00 amClosed
E.E. Shimla Urban DIVISION, HPPWD, Shimla-3
E.E. Shimla Urban DIVISION, HPPWD, Shimla-
SR to Radiology Department in 12th floor New OPD Block IGMC Shimla. SH Demolition work, Aluminium work, Granite work, WS SI etc.
2026_PWD_143133_6
SD-III-9875-88dt.05-09-2026
Open Tender
Civil Works - Buildings
Percentage
30 days
IGMC
As per SBD
10 documents required · 10 mandatory
₹350
₹12,610
19 Sept 2026
9 Sept 2026
17 Sept 2026
9 Sept 2026
17 Sept 2026
9 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)including carriage of materials within all leads and lifts. | 4 | Per cubic metre | 975 | ₹3,896.83 |
| 2 | Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within all leads and lifts. In cement mortar. | 3.43 | Per Square Metre | 805 | ₹2,759.66 |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50metres lead;- For thickness of tiles 10mm to 25mm complete including carriage of materials within all leads and lifts. | 45 | Per Square Metre | 34 | ₹1,530 |
| 4 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) | 165.89 | Per/kilogramme | 576 | ₹95,551.49 |
| 5 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron | 65.16 | Per/kilogramme | 585 | ₹38,118.6 |
| 6 | Providing and fixing ACP sheet 3mm thick in aluminium ceiling/lining/partitions with PVC neoprens gasket fixed with self drilling screws etc. complete as per Architect drawings and by the Engineer-in-Charge including carriage of materials within all leads and lifts. (Cost of aluminium snap beading shall be paid in basic item). | 72.64 | Per Square Metre | 1,695 | ₹1,23,117.17 |
| 7 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on both sides | 4.05 | Per Square Metre | 1,144 | ₹4,633.2 |
| 8 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment). | 2.88 | Per Square Metre | 212 | ₹610.56 |
| 9 | Providing and Fixing Wire Mesh 144 G of approved brand & quality in windows & doors including carriage of materials within all leads and lifts. | 5 | Per Square Metre | 381 | ₹1,905 |
| 10 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mm | 4 | Each | 212 | ₹848 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.00 MB
SBD630068.pdf
Tender Documents • 5.06 MB
BOQ_212606.xls
BOQ • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .