PROVISION OF CERTAIN SPECIAL REPAIRS, ADDN/ALTN AND MINOR WORKS AT CAW, SECUNDERABAD UNDER GE (AF) HAKIMPET

Amount

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed by Engr-In-Charge

M &L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L Hardwood 1st class 21 mm thick for Planed one side & edges tongued and grooved or rebated, and complete all as specified and directed.

M & L Second class hard-wood in scantlings timber fixed clean sawn, secured with nails or brads complete all as specified and directed.

S&F Mild steel screw bolts (machine made) 12mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15cm and n exc 22.5cm long complete all as specified and directed.

M & L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed

M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and as directed.

Taking down cement plaster on brick or stone etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and wastecomplete all as directed

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 is to be finished even and smooth (with out using extra cement) complete all as directed

M&L for 15 mm thick rendering in CM (1:4) on external surfaces/ outside surfaces finished even and smooth without using extra cement

M&L for preparation of new Surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of priming paints plaster coat all as specified and as directed by engineer in charge

Complete removal of existing treatment from walls including scrapping and removing the entire scales of existing treatment complete all as directed.(internal and external)

Complete removal of existing treatment from ceiling including scrapping and removing the entire scales of existing treatment complete all as directed.(internal and external)

M&L for Distempering with 1st quality acrylic distemper wall/ceiling (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work all as specified and directed

M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Taking down chowkats or frames exc. 1.5 Sq mtr each with shutters (without taking off shutters from the frames) complete all as specified and as directed by the Engineer-in-Charge

S&F factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

S & F factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. Note: Glass shall be paid separately.

S&F 4.8mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed by the Engineer-in-Charge.

S &F110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints but fixed in wall all as specified and directed.

S &F110mm bore PVC(SWR) bend all as specified and directed.

M&L PCC 1:3:6, type C-1 (40 mm graded agg ) for plinth protection 75 mm thick, finished without using extra cement complete all as specified and as directed

M & L for grade 'B' forming Contraction (Dummy) joints 65mm deep X 10mm wide, filled with cealing compound complete all as speciefied and as directed

Dismantling/removing the textile coverings and cover fillets all as specified

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M&L for rendering 10 mm thick in CM 1:3 on concrete roof slabs including mixing water proofing compound at 3% by weight of cement (but excluding the cost of cement), finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, using water proofing compound at 3% by weight of cement but excluding the cost of WPC ( water proofing compound should be measured and paid seperately) complete all as specified and as directed.

M & L for cleaning the roof surface and applying oil bond bitumen primer @ 0.2 kg/sqm providing and laying 3mm thick APP modified water proofing membrane weight not less than 4kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm having soften point not less than 140 degree centigrade tensile strength not less than 800 N/sqcm tearing strength 180N with minimum of 10cm side laps and 15cm end laps by application of torch applying a coat of blown grade hot bitumen over the membrane @ 1.2kg/sqm and providing garnish with solar reflective bitumen aluminium paint @ 0.1 kg/sqm over completed area of membrane complete all as specified and as directed by engineer in charge. Note: the quoted rate shall included for cutting grooves in roof parapets, upward facias, etc and inserting of membrane and making good with CM 1:3 wherever required complete all as specified and as directed.

Supply only integral water proofing compound as per manufactures instruction.

Dismantling PVC/AC/steel corrugated, semi corrugated sheets in roof covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Surface dressing not exc 15 deep in hard / dense soil and removal of soil distane not exc 50mtr and depositing as required complete all as specified and as directed.

Excavation in post holes or similar holes n.exc 0.50 cum and getting out/returning, filling in and ramming removing surplus soil to a distance n.exc 50 m in hard / dense soil complete all as specified and as directed.

M & L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and as directed.

M&L brick work with using old size flyash bricks, straight or curved on plan exc 6mtr mean radius, built in CM 1:6 complete all as specified and as directed.

M&L Half brick work with using old size fly ash bricks straight or curved on plan to any radius built in cm 1:4 complete all as specified and as directed.

M & L hard core of gauge n exc 63mm using broken brick deposited spread and levelled in layer n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L 100 mm thick cement concrete 1:4:8 type D-2 ( 40mm graded stone aggregate ) in sub base of floor complete all as specified and as directed.

M&L for designer rubber moulded chequered cement concrete tiles with mixture of grey and white cement in equal proportions with pigments of size 300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layer in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed.

M&L Rendering 15mm thick in two layer (10mm 1:6 over a coat of 5mm 1:4 ) top layer mixed with wpc at 2% of cement as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered wall surfaces and applying two coats of cement based paint over a coat of base coat including preparation of surfaces on walls complete all as specified and as directed.

S&F MS plates(plain or chequered) channels, square cut or notched (ordinary and counter sunk) Fe-410-W(Gde-E-250) quality B forming holes without any attachment complete all as specified and directed

S&F of steel structure/frame made of MS box/pipe sections ERW or induction butt weld tubes conforming to IS-1161-1979 grade st 240 as in columns,purlins and truss complete fitting as directed including one shop coat of red oxide primer and two coats of synthetic enamel paint complete all as directed.

S&F MS Screw bolts (machine made) with hexgonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square exc 5 cm and not exc 10cm long witgh 5 to 10 mm dia complete all as specified and as directed.

S&F 600x600mm GI bottom pre coated exposed snap grid frame work with 25x25x7mm wall angle and 25mm web, 35mm flange 0.7mm thick T-sections hanging with 4mm dia GI wire (up to 1200 mm long) including level clip, soffit cleat and 12.7 mm dia metal Raw plug at 1200mm c/c in both direction complete all as specified and directed

S&F PVC laminated designed (one side PVC lamination and other side aluminium paper) gypsum board 600 X 600 X 8 mm thick tiles decorative type in GI grid frame work with screws or clips etc complete all as specified and as directed by Engineer-in-Charge.

Cutting holes into orthrough brick wallsbuilt in mud mortar andmaking good in cementmortar 1:3 or cementconcrete 1:2:4 type B-l asrequired in stone wallsbuilt in cement mortar orcement lime mortar andwalls of cement concrete superficail area exc 150 sq cm and not exc 400 sqn cem

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and over 3mm thick wall putty etc all as specified and as directed.

M&L for preparation of old wooden surfaces of any description exc 10cm girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for complete removal of old existing treatment on wall /ceiling surfaces and applying two coats of oil bound distemper over a coat of primer over a coat of 3mm thick birla wall care putty etc all as specified and as directed.

S&F 0.71mm Plain Aluminium sheeting Alloy 31000H4 in stepped flashing(measured as theminimum rectanglefrom which the piecescan be cut)

Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed by the Engineer-in-charge.

Taking down unserviceable MCB DBs, Metal clad DBs along with MCBs of any description and making good the disturbed surfaces of walls to match with existing sorrounding wall finish complete all as specified and as directed by the Engineer-in-charge.

Taking down unserviceable Security light of any description including service bracket, clamps nut bolts etc,.

M&L for point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable, with multi-stranded copper conductor cable, 1100 volts grade, drawn through and including non metalic medium grade, rigid PVC conduit with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings), provision of 1.5 sq mm PVC insulated copper cable FRLS as earth continuity conductor, company fabricated GI sheet steel terminal box suitable for Modular switches concealed flush to walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, all as specified and as directed for the following:-

(a) One light point controlled by one one way switch .

(b) One Exhaust fan point controlled by one one way switch.

(c) One 3 pin socket outlet 5 Amps on the same board with other switches.

(d) One 3 pin socket outlet 5 Amps on the Independent board.

All as per item here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge.

M&L for Modular switch 6A, 1 way.

M&L for Modular switch 16A, 1 way.

M&L for Socket outlet 6A modular.

M&L for Socket outlet 16A modular.

S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body. Make :Anchor/ Havells/ Legrand/ Crabtree

S & F in repairs, wall mounted 10W LED 6K light fitting, 2" with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking down old one, all as specified and directed by Engineer - in - Charge. Make: Havells, Model LUMILINEBS10WLED865SPCWH or equivelent in Philips/CG.

S & F in repairs, wall mounted 22W LED 6K light fitting, 4" ultra slim, with extruded Al , heat sink, integral driver, energy efficient, ready to use pack etc, complete with all accessories internally pre wired and fixing the same on and including two Nos, PVC Block and Connecting up with twin core twisted flexible copper conductor cable of suitable size up to ceiling rose including taking down old one, all as specified and directed by Engineer - in - Charge. Make: Havells, Model LUMILINEBS22WLED865SPCWH or equivelent in Philips/CG.

S&F LED luminaire 2'x2', 35/36 watt, 220 V AC surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for surface mounted as required including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by the Engr-in-charge. Make : Havells, LHEWEBP7IN1W036 'OR' equivalant in Phillips / CG.

S&F in repair LED flood light of 100 watt New generation energy saving & environmental friendly, long life, pressure die - cast aluminium housing Flood Light with PC diffused lens enclosure over LED for glare free light. with IP 65/66 protection complete with clamps, bolts, nuts etc for fixing all as specified and as directed. Model No- JETAADORNFLS100WLED757SSYMTOTG of Havells or equivelent in Bajaj, CG, Phillips.

S&F MCB distribution board double door type, SPN 12 way sheet steel powder painted with bus bar neutral link earth bar etc.

S&F MCB TPN 40 Amps, 240 volts suitable for fixing in MCB DB 'C' series complete all as specified and as directed by The Engineer-in-charge.

S&F MCB SP 5 to 32 Amps, 240 volts, suitable for fixing in MCB DB 'C' series complete all as specified and as directed by The Engineer-in-charge.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminium housing and heat resistent complete with driver, lampbracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

M&L for Earthing complete with galvanised cast iron steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the earth plate not less than 1.5mtr below normal ground level, connected to galvanised earth leadwire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel as earth electrod with top edge of earth plate not less than 1.5 mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI Light grade 15mm dia from earth plate to main switch board/panel,watring pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaining surplus excavated meterial all as required at site and specified in electrical plate No 5 of SSR part I 2009 complete all as specified and as directed.

S&F Switch piano flush type, single pole one way 5 Amps 240 volts, complete all as specified and directed.

S&F Stepped type electronic fan regulator flush type, complete all as specified and directed.

S&F Switch socket combination, 2 in 1, 3 Pin, flush type 5 Amps.

S&F ceiling rose, 3 terminal, PVC/Polycarbonate isolated body.

Supply and fixing LED luminaire 2'x2', 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for False roof ceiling as required including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by the Engr-in-charge. Make : Havells, LHEWEBP7IN1W040 'OR' equivalant in Phillips / CG.

M&L for Taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, including reassembling blades and hanging ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan all as specified and as directed by the Engineer-in-charge.

Dismantle the unserviceable rubber bush with clamping set, supply and fix rubber bush with clamping set, GI bolt, nut and split pin complete all as specified and as directed by the Engineer-in-charge.

Excavation in trenches in any type of soil not exceeding 1.5 m in wide and not exceeding 1.5m in depth for laying of cables / stay assembly / pipe lines and getting out in the following types of soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cms complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

Supply and spreading clean, fine, dry river sand in trenches for cushioning of under ground cable / inside transformer yard complete all as specified and directed by Engineer-in-Charge. Note: Punned thickness shall be measured for payment purpose.

Supply and lay common burnt clay building bricks sub class 'B' of designation 75 laid in trenches as protection to cables complete all as specified and as directed.

M & L for Road cutting / hard standing for taking up or laying of LT UG cable upto a depth of 15 cm, after laying of cable, well ramming to the excavated soil and repair the exvcavated portion of road as existing or by providing suitable mixture of PCC all as specified and as directed.

Taking down unsv GI tubing and M&L for new galvanized steel tubing, light grade, with all fittings for protection of cable complete all as specified and as directed of the following sizes :-

(i) 40 mm bore

Supply &Laying LT UG Cables , XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, of following cross-sectional area complete all as specified and as directed.

(a) 10Sqmm, 2 Core

(b) 16Sqmm, 4 Core

S&F in repair LED flood ligt of 150 watt New generation energy saving & environmental friendly, long life, pressure die - cast aluminium housing Flood Light with PC diffused lens enclosure over LED for glare free light. with minimum IP 66 protection complete with clamps, bolts, nuts etc for fixing all as specified and as directed. Model No- JETAADORNFLS150WLED757SSYMTOTG of Havells or equivelent in Bajaj, CG, Phillips.

S&F in repair Pole mounting junction Box (Looping Box) for street light for 3 Phase 4 Wire system with internal mm comprising of PVC connection and one MCB 6 Amps including Mounting arrangment . Make : Sintex Model no GSJB 2520 or Havells /Spelsbary

S&F in repair Pole mounting junction Box (Looping Box) for street light for 3 Phase 4 Wire system with internal size 103 x 103 x 73 mm comprising of PVC connection and one MCB 6 Amps including Mounting arrangment . Make : Sintex Model no GSJB 1111 or equivelent in Havells /Spelsbary

S&F LED street light fitting 45 Watt, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having IP65 protection and impact resistance of IK08. model No ENDURASUNDOWNSL45WLED765PASYBOPC of havells or equivelent in bajaj/CG complete all as directed by engineer in charge.

S&F in repair street light bracket made up of GI pipe light grade 32 mm dia length 1.5 RM bent to shape with MS clamps, bolts, nut & washers complete, including taking old bracket of any size all as specified and as directed.

Supply and connect new PVC insulated twin core copper conductor flexible cable of 1.5 sqmm Including Taking down existing unsv cable and complete all as specified and directed by Engineer-in-Charge.

S&F generation, IP 65 post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire 25W with high power LEDs as light source complete all as specified and as directed. Make: Havells, Model No:CORALPT25WLED757PSYMTOPC or equivalent in CG, Phillips. Note:- quoted rate shall be inclusive for all fixing arrangement like GI pipe, nut, bolts etc.

S&F generation, IP 65 post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, alluminium enclosure,50W with high power LEDs as light source and and die casted heat sink exhibits classic Victorian look with symmetrical light distribution. complete all as specified and as directed. Make: Havells, Model No:JUPITERMAXIPT50WLED830PSYMTOPC or equivalent in CG, Phillips.

M&L for rigid non- metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, sadles, pipe hooks etc. of size 20 mm dia. All as specified and directed by engineer in charge.

M&L for painting the external exposed surfaces of steel tubular sewaged/ rail pole of any size alongwith cross arm, brackets and connected accessories with one coat of aluminium paint including preparation of old painted surfaces and pasting radium red stickers / paint with 3 line around the pole and numbering of pole with synthetic enamel white paint on black base complete all as specified and directed

Taking douwn ceiling fans of any size, any make fixed/hanged at different location in Air force officers enclave at bolton road and CAW, dismantling the fan complete cleaning, applying grease, filling cavaties with fillet and re-asembling the same including replacing Anti Suicide down rods, split pins, flexible copper cable twin core , 70 cm long and refixing the ceiling fan on the same location in original position, testing and commissioning of fan for smooth running as per entire satisfaction of Engineer in charge. Note:- (i) Quoted rate by tender of any item of the schedule is inclusive of taking down the ceiling fan from the position and re-fixing/hanging in position connecting and testing complete. (ii) Anti Suicide down rods replacement of spare shall be measured and paid separately under appropriate items.

Dismantle the unserviceable rubber bush with clamping set, supply and fix rubber bush with clamping set, GI bolt, nut and split pin complete all as specified and as directed by the Engineer-in-charge.

S&F of 18'' Gold life Smart MS down rod (Anti Suicide fan rod) white colour for ceiling fans of any size and make complete all as specified and directed. Make:- Gold life Smart Fan down Rod HSN/SAC Code 8414.

S&F of 24'' Gold life Smart MS down rod (Anti Suicide fan rod) white colour for ceiling fans of any size and make complete all as specified and directed. Make:- Gold life Smart Fan down Rod HSN/SAC Code 8415.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, complete all as specified and directed. Make:- Venus or equivalent in havells/CG

Supply and fix new PVC connection 15mm dia 600mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water, complete all as specified and directed.

M&L for Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn thorough and including double locking type PVC casing and caping and its accessories of suitable size and including provisoin of 1.5 sqmm PVC insulated copper cable FRLS as earth continuity conductor, fabricated steel teminal box made of MS sheet suitable for Modular switches concealed in walls with front cover & base frame, screws, suitable for housing modular switches, socket outlets, fan regulators etc, all as specified and as directed for the following:- Make:- For copper wire 1100V:- Finolex, Havells, L&T, Anchor and Make of PVC Casing Caping - Precision, Modi, Presto Plast, Supreme, Polycab, Sudhakar

(a) One light point controlled by one one way switch .

(b) One Exhaust fan/wall mount fan/ ceiling fan point controlled by one, one way switch.

(c) One 3 pin socket outlet 5 Amps on the Independent board.

All as per item here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge.

Sub main wiring complete with two runs of 4.0 Sqmm single core PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable with one run of 4.0 Sqmm single core, PVC insulated FRLS cable, 1100 volts grade, multi-stranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of non-metallic rigid PVC conduit and conduit accessories concealed in any type of wall including stone masonry, floors / fixed to ceiling etc. all as specified and as directed. NOTE: Two runs of 4.0 sqmm cable conductor, one run of 4.0 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

All as per item above but with 2x1.5 Sqmm + 1x1.5 Sqmm complete all as specified and as directed by Engineer-in-charge. NOTE: Two runs of 1.5 sqmm cable conductor, one run of 1.5 sqmm earth continuity conductor cable and one run of PVC conduit shall be measured as one unit length.

Providing suitable hole in stone masonary wall including taking douwn and refixing of Exhaust fan of 230 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wall all as specified & as directed.

S&F new louvers suitable for existing exhaust fans of size upto 450 mm sweep, complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with bades, and frame and louvers ,connecting wire and all accessories including taking down Existing exhaust fan and deposit to E&M store all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Wall mounted fan Platina High Speed 400 mm sweep, Ultra high speed 3 Blade and thermal overload protection for long lasting motor power consumation 55 Watt fan motor speed 2000 RPM Air dilivery 95 (CMM) with accessories complete all as specified and as directed by Engr-in-Charge. Model No 'Platina HS 400MM' of Havells or equivelent in CG/Orient.

S&F electric chimney capacity of air flow of 1250 Cum/hr of size of 90 cm specifications of heat auto clean with motion sensor, auto off function, touch sensor controll, brushless DC motor 9 speed control, oil collector tray, electric light LED, filter less chimney complete all as specified and directed. Model No- CH 6063 AC of Glen or equivelent in Blow hot /V-guard.

S&F of PVC pipe of 100 mm size including bends, reducer etc and making good disturbed surface matching with existing surface for chimney. complete all as specified and directed.

Dismantling of wall mounted split units indoor & outdoor complete or window type aircondioners of any capacity and deposted to store including all necessary arrangements, good finishing etc including complete all as specified and directed.

Supply, installation, connect, test and commissioning of hi wall split units indoor / outdoor with suitable capacity complete with cordless remote control unit, with in built air ioniser, bio filter for better indoor air quality, leakage detector etc, with minimum 5 star rating with inverter technology and EER above 3.3 of capacity 1.5 TR (copper condensor), operated using environment friendly refrigerant gas R-410a/R-32, inclusive of suction and discharge lines with suitable size of copper tubes, neccessary brazing, provision of nitrile tubing over gas circulating copper tubes up to 10 mtr, neatly tying the ends with PVC insulating tape, stand for outdoor unit, provision of suitable drain pipe for disposal of waste water upto ground level and testing complete all as specified and directed. Notes : (i) Quoted rate deemed to be included cost of making necessary hole into stone/brick wall for copper tube & power cord and making good to damage all as existing. (ii) Outdoor unit shall be mounted on MS bracket as per site Requirement.

Supply, installation, connect, test and commissioning of hi wall split units indoor / outdoor with suitable capacity complete with cordless remote control unit, with in built air ioniser, bio filter for better indoor air quality, leakage detector etc, with minimum 5 star rating with inverter technology and EER above 3.3 of capacity 2.0 TR (copper condensor), operated using environment friendly refrigerant gas R-410a/R-32, inclusive of suction and discharge lines with suitable size of copper tubes, neccessary brazing, provision of nitrile tubing over gas circulating copper tubes up to 10 mtr, neatly tying the ends with PVC insulating tape, stand for outdoor unit, provision of suitable drain pipe for disposal of waste water upto ground level and testing complete all as specified and directed. Notes : (i) Quoted rate deemed to be included cost of making necessary hole into stone/brick wall for copper tube & power cord and making good to damage all as existing. (ii) Outdoor unit shall be mounted on MS bracket as per site Requirement.

S&F voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 270V with built in thermal overload protection, initial time delay system, low & high voltage cut off protection and of capacity 4KVA complete all as specified and as directed.

STANDARD AGENCIES (BID ID -3125217)

SRI LALITHA CONSTRUCTIONS (BID ID -3126945)

K LAKSHMAN SINGH AND CO (BID ID -3120905)

KOGANTI CONSTRUCTION COMPANY (BID ID -3134787)

RAJU AND COMPANY (BID ID -3132656)