Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | Rejected-Technical | - | Rejected-Technical Reject |
Tender Value
₹7.5 L
EMD Value
₹7,500
Closing Date
27 Dec 2024, 3:00 pmClosed
Executive Officer, Kulasekharam Town Panchayat
Executive Officer, Kulasekharam Town Panchayat
Maintanance of Public toilet at Kulasekharam market and maintanance of public toilet at Arasumoodu Kamarajar Play Ground in Kulasekharam Town Panchayat
2024_DTP_509790_1
528/2024/A1
Open Tender
Civil Works - Buildings
Lump-sum
180 days
Kulasekharam
V Class and Above
1 document required · 1 mandatory
₹0
₹7,500
10 Feb 2025
11 Dec 2024
27 Dec 2024
11 Dec 2024
27 Dec 2024
11 Dec 2024
11 Dec 2024 - 27 Dec 2024
Amount
Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc complete complying with SS20B. TNDSS No:23&24
Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28
Cement concrete of mix 1:3:6 (one part of cement three part of sand and six part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:24
Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90cm * 60cm * 10 mm gauge with MS angles of size 25mm * 25mm x 3mm laid over silver oak (CW) joists of size c/c complying with standard specifications as per TNDSS NO:30 & 86.
Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO:30 & 86.
Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97
Reinforcement Cement concrete 1:12:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30
Brick work in cement mortar 1:5 (one part of cement five part of sand) mix using best country bricks of size 8 3/4 "*4 1 4 "*2 3 4 " from approved quarry including curing, cost and conveyance of all materials to site and all labour charges etc complete as per standard specification
Ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshade canopies, stair case steps, landing slab, etc. with cement mortar 1:3 (one part of cement three part of sand) 10 mm thick including packing the surface and provided necessary cement mortar nosing, headings as per the size specification wherever necessary using the same mix as directed by the departmental officers etc. complete complying with standard specification.
Plastering walls with cement mortar 1:5 (one part of cement five part of sand) 12 mm thick including all cost and conveyance of all materials and all labour charges etc. complete as per standard specification. TNDSS No:61
Paving floor with colour ceramic tiles of size 200 x 200 * 6 mm in all floors over the base layer of cement mortar 1:3 (one part of cement three part of sand) 20 mm thick pointed with white cement at 0.40 kg/m2 including finishing the joints etc complete, as directed by the departmental officers (The rate should be exclusive of cost of flooring concrete 1:5) special
Dadooing the walls with plain glazed tiles of 150 x 150 * 6 mm set in cement mortar 1:2 (one part of cement two part of sand) 12 mm and pointing white cement used 4kg/m2 neatly etc complete as directed
Solid PVC door shutters using 19 gauge 19 mm MS square tubes for styles and outer frames. 15 mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5 mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings
Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over a priming coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification.
Wiring with 2 * 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light/ Fan Point for electronic regulator. (Assume 5 Points Per Coil) (SD-20)
Wiring with 2 * 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylem sheet cover for 5 A 3 pin non interlocking FT wall socket and 5A FT switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. (SD-38)
Supply and fixing of 16 Amps DP Switch with metal clad of 500 V with fuse and neutral (Side Handle) on suitable TW board with PWD Earthing SD 141
Supplying and fixing and jointing G.l. Pipe of approved quality and variety of B class pipe of ISI Standard including cost of such specials, cutting, threading of pipes but including fixing in the wall with necessary clamps, screws, making holes in the wall and painting over a primer coat of red oxide etc. complete including cost and conveyance of all material and all labour charges and all other incidental charges etc. completed as per standard specification. 110 mm PVC pipe 4 Kg/cm2
25 mm dia PVC pipe 10 Kg/cm2
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg./sq.cm including cost of necessary PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails etc and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3 metre pipe length etc complete complying with standard specification.
Supplying and fixing in pesition best quality and approved variety 32 mm gun metal Gate valve / Wheel valve / Check valve / Push cock with ISI mark of the following sizes including cost of shellac thread etc including labour for cutting and threading of Gl pipe etc complete
Supplying and fixing position CI/PVC Nahani Trap/Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (one part of lime, two part of sand and five part of 40 mm gauge brick jelly) and finished with Cement Mortar 1:3 (one Cement, three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc complete complying with standard specification.
Supply and fixing in position best quality of approved make Indian Water closet of size 580 x 440 mm with all accessories such as 'P' trap or 'S' trap confirming to IS 2556 part XII with sand cusion and forming flooring alround the closet using 40 mm leveling course 1:4:8 - 100 mm thick and finishing the top to the required slope and including necessary internal connection and outlet connection and making the disturbed potion to original condition without leakage etc including Labour charges for fixing etc complete
Supplying and fixing mild steel gate using MS flats and rounds as directed by the departmental officers inclusive of cost of MS grill including one of red oxide and fixing in position etc. complete (as per the schedule of rate)
Cement concrete 1:2:4 (one part of cement two part of sand and four part of aggregates) using machine broken granite jelly of 20 mm size for all cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30
Painting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complete complying with standard specification. (The make, quality and colour of paint should be got approved by the departmental officers before use on works.)
Thorough Scrapping of old plasted surface.
Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over existing coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification.
Supply and delivery of fixing of HDPE tank 500 litres capacity as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of Gl pipes and specials for pipe connection works including cutting, threading and fixing chargers as directed by officers
Dry rubble masonry using new stone including simultaneous pointing of the export surface and all incidental charge such as bailing out water etc complete, Scaffolding curing fishing complete with standard specification
S RAJA KUMAR (BID ID -1220013)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_606313.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .