REPAIRS TO ROOF FALSE CEILING ROLLING SHUTTERS GATES ETC AT NORTH AND MUTGA CAMP AT ATS UNDER GE AF SAMBRA BELAGAVI

Amount

Dismantling asbestos cement (Corrugated, semi corrugated etc) sheets in roof coverings including ridges all as specified.

Dismantling Steel (Corrugated, semi corrugated, etc) sheets any guage, any thickness in roof coverings incl ridges all as specified.

Dismantling of Mangalore pattern or similar tiles in roof coverings incl ridges all as specified.

Dismantling wall and ceiling boards (Fibre, pulp, insulation, etc) or insulation boards / slabs / blankets any thickness including cover fillets, frame work all as specified.

Dismantling timber scantlings 40 Sqcm and over in section in any position (unframed work) for purlins, rafters etc.

Dismentling of wrought iron or mild steel work of any discription.

Demolition of cement concrete in ground floor and pavings n exc 15 cm thick ness (Below or above ground level) all as specified.

Demolition of brickwork or stone/boulder masonary, build in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but all as specified.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided all as specified and as directed.

Removal of concrete and plaster debris to a distance 5 Km and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in Hard/Dense soil for foundation etc or for shaft, wells, manholes, pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

Material and labour for excavating in post holes (or similar holes) in hard / dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc 50 m and making good surface complete all as specified and directed

Returning filling in including spreading levelling and well ramming in layers not exc 25 cm in hard soil all as sprcified and directed.

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as sprcified and directed.

Material and labour for hard core of broken stone aggregate gauge not exceeding 63 mm deposited spread and leveled in layers n exc 15 cm thick, watered and well rammed to a true surface all as specified.

Material and labour for post construction anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron all as specified and directed.

Material and labour for post connstruction anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same all as specified and directed.

Material and labour for PCC 1:4:8, type D-2 (using 40mm graded trap stone agg) as in mass concrete complete all as specified and directed.

Material and labour for precast RCC 1:2:4 type B-1(using 20 mm graded trap stone agg) as in cover slab set and jointed in CM 1:4 including necessary form work all as specified and directed. ( steel shall be measured and paid seperately).

Material and labour for Plain Cement Concrete 1:2:4 type B1 using 20 mm stone aggregate for embedding M S pipes or similar work all as specified and directed.

M/L for Cement concrete type C-1 1:3:6 (using 20 mm graded aggregate) as in coping including weathering, slightly rounded or chamfered angles and necessary form work complete all as specified

Material and labour for pre cast cement concrete block masonry type C1, 1:3:6 (20 mm graded aggregate) solid blocks 10cm thick (with plain or interlocking joints as directed) having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) and set in cement mortar 1:4 complete all as specified.

Material and labour for pre cast cement concrete block masonry type C1, 1:3:6 (20 mm graded aggregate) solid blocks exc 10cm in width having minimum compressive strength of 50 kg/Sq cm as per IS 2185 (Part I) and set in cement mortar 1:4 complete all as specified

Material and labour for RCC (nominal mix in M-15) (20mm graded aggregates) for foundation, including rafts, footings, foundation beams, plinth beam, bases for columns etc basement slabs, underreamed piles and mass concrete complete all as specified and directed.

Material and labour for RCC (nominal mix in M-15) (20mm graded aggregates) for columns, pillars, piers, posts, and struts complete all as specified and directed.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surfaces flat complete all as specified and directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions vertical or to batter fair finished surfaces flat complete all as specified and directed.

Material and labour for second class hardwood clean sawn timber in scantling framed and fixed for purlins and rafters on site all as specified and directed.

Taking down of chowkats or frame exc 1.5 sqm and n exc 4 Sqm each all as specified and directed.

Taking down shutters of size exc 1 Sqm but n exc 2 sqm, resecuring or easing and adjusting and refixing in the same opening all as specified and directed.

Material and labour for Second class hardwood chowkats and frames Plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed

Material and labour for 2nd class glazed and skeleton shutters, 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified

Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws all as specified

Supply and fix 140 mm floor door stopper of aluminum alloy body and tongue,anodised with hard drawn steel spring fixed in floor all as specified

Supply and fix in repairs 140 mm floor door stopper of aluminum alloy body and tongue,anodised with hard drawn steel spring fixed in floor.

Supply and fix 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed.

Supply and fix in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed.

Supply and fix Butt hinges 100 mm long medium Weight cold rolled mild steel and fixed.

Supply and fix 150 mm long extruded aluminium alloy anodised handle fabricated type.

Supply and fix in repairs150 mm long extruded aluminium anodised handle fabricated type (bolt type) and fixing clips of sheet, cast of extruded section and fixing bolts and sliding bolts extruded sections or cast aluminium alloy and fixed.

Supply and fix 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast of extruded section and fixing bolts and sliding bolts extruded sections or cast aluminium alloy and fixed.

Supply and fix in repairs for 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp and stapple .

Supply and fix 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete in mild steel fixed to MS frame or wooden framed as specified

Supply and fix in repairs for Plain mild steel wire, galvanised class 3 of 4 mm dia in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed.

Supply and fix in repairs 1.00mm Steel rolling shutters, without ball bearing , as specified including top cover ,anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete: push pull or manual type complete all as specified and as directed.

Supply and fix of safety lever locks mild steel with 4 levers for rolling shutters

Supply and fix ball bearing suitable for rolling shutters of any size as ordered.

Material and labour for rolled section having Fe 410-W (Gde E-250) quality B as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guids for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed

Material and labour for structural steel of plates, Fe-410 W (Gde E-250) Quality-B), channels, square cut or notched (ordinary or counter sunk) forming holes with riveted, bolted or welded attachments all as specified and directed

Supply and fix Steel tubular trusses / posts including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified and directed.

Material and labour for mild steel bolts of 11 to 15 neck dia, purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 10 cm long n exc 15 cm long all as specified and directed.

Material and labour for mild steel TMT bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel TMT bars of 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply and fix framed work as water tank stagging/ gates of angle or other section with gusset/ base plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing Fe 410W (Gde-E-250) quality A complete all as specified and as directed.

Supply and fix plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 290 (Gde E-165) complete all as specified and directed.

Supply and fix mild steel bolts, dia of neck exc 20mm n. exc. 25mm purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long imbeded in RCC complete all as specified and directed

Supply and fix mild steel Round bars of 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour for mild steel work a in hold fast, wall ties,bands, straps or similar small articles conforming to Fe-290 Gde E-165 etc.complete all as specified and directed.

Material and labour for of Roof tiles, Mangalore pattern, interlocking at side joints, laid dry supported on battens including cutting holes through tiling and half tiles at verges, including concrete or mortar fillets along parapets, chimney stacks etc complete all as specified and directed.

Supply and fix 6 mm thick Non asbestos cement corrugated or semi corrugated sheet in roof fixed with 'L' or 'J' type or cranked hook bolst and incl each one number GI washer and bitumen washer.

Supply and fix 6 mm thick Non asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with 'L' or 'J' hook.

Material and labour for pre painted glavalume alumium zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified. (Note :- The length of self tapping screw may vary for wooden and steel truss. Contractor to quote rate accordingly.)

Material and labour for pre painted glavalume alumium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in rideges, roof overing / cladding to wall, fixed with self tapping screws as specified. (Note :- The length of self tapping screw may vary for wooden and steel truss. Contractor to quote rate accordingly.)

Material and labour for powder coated Aluminium snap grid (minimum 50 microns thickness powder coating) of size 605 x 605 mm with anodised aluminium angle of size 25mm x 25mm x1.5mm thick and main & cross T of size 40mm x 25mm x 1.5mm thick for false ceiling including fixing of supporting hangers all as specified and directed . Note :Cost of hangers will be measured & paid seperately under relevant items of this schedule

Supply and fix Hangers 6 mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified.

Supply and fix 12 mm thick Gypsum board of size 600 x 600 mm in ceiling fixed with screws and finished with two coats oil bound distemper over a coat of self primer all as per manufaturers instructions complete all as specified and directed.

Material and labour for 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing all as specified.

Material and labour for 100 mm thick PCC 1:2:4 type B1 (Using 20 mm graded stone agg) as in floor all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), all as specified.

Material and labour for coloured Non skid tiles superior finish grade B-1 quality 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floor with rectified edges ( joint free) etc set and jointed in neat cement slury over cement screed 15 mm thick 1:6 all as specified.

Material and labour for Coloured glazed ceramic tiles economy finish Gde B-II (b) quality of size 300 x 450 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10 cm thick backing with CM 1:4 all as specified.

Material and labour for rendering 15 mm thick cement plaster in CM 1:4 for fair faces of brickwork or concrete surfaces walls finished even & smooth without using extra cement all as specified

Material and labour for rendering 10 mm thick cement plaster in CM 1:4 for fair faces of brickwork or concrete surfaces wall finished even & smooth with without using extra cement all as specified

Material and labour for preparation of new steel surfaces of any discription, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified.

Material and labour for preparing new plastered surfaces and applying two coats of cement base paint over a coat of primer on surfaces of walls all as specified

Material and labour for preparation of external old plastered surfaces of walls by complete removal of existing treatment including washing, rubbing and cleaning and applying two coats of antifungal paint over a coat of primer all as specified.

Material and labour for complete removal of existing treatment of old surface of wall by scrapping and washing including perpration of surface by applying a thin layer of wall putty (JK or Birla) and applying two coat of oil bound distemper over a coat of primer all as specified and directed

Material and labour for preperation of new wooden surfaces of any discription not otherwise described,, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer all as specified and directed.

Material and labour for preperation of old wooden surfaces of any discription not otherwised described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) all as specified and directed.

Taking down 15 mm bore steel / PVC tubing and connection all as specified and directed.

Taking down 20mm bore steel/PVC tubing and connection all as specified and directed.

Supply and Laying of CPVC Pipes (16mm) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifed.

Supply and Laying of CPVC Pipes (20mm) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifed.

Supply and fix in repairs 15mm stop valves fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed bolts ends for iron pipe or for unions all as specifed.

Supply and fix in repairs Chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union all as specifed.

Supply and fix in repairs tubular brass chromium plated Towel rail 20 mm dia D type 60 cm long between flanges all as specifed.

Supply and fix in repairs 15mm bib taps fancy type chromium plated round handle, screwed down, screwed for iron pipe all as specifed.

Demolition and breaking up drain pipes (salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar of size 100 mm/ 75 mm all as specifed.

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches all as specifed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in trenches all as specifed.

Supply and fix PVC (SWR) Junction (single T) equal or unequal with access door 75 mm bore pipe all as specifed.

Supply and fix PVC (SWR) Junction (single T) equal or unequal with access door 110 mm bore pipe all as specifed.

Supply and fix 75 mm bore PVC (SWR) bends of any radius with access door all as specifed.

Supply and fix 110 mm bore PVC (SWR) bends of any radius with access door all as specifed.

Supply and fix (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia inclduing fixing to existing pipe properly with solvent all as specified and directed

Supply and fix in repairs Vitreous China Ware Wash hand basin white, flat back, size 580 x 450 mm size (for Hospital use) with 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and 32 mm dia Waste fittings, brass chromium plated for wash basins etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including 1 Nos PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed

Dismentling of water tank of exc 1000ltr and n exc 2000ltr capacity with all accessories gate valve, float valve etc. and removing to store.

Supply and fix rotational moulded polyethylene water storage tanks of 2000 ltrs capacity (cylindrical vertical with closed top) hoiseted and fixed in position all as specified and directed in SSR part I inlcuding fixing of PTMT ball valve epoxy coated aluminium rod and high density plastic ball of 40 mm dia or equivalent as per site condition.

Taking down 40mm bore steel tubing and connection all as directed.

Material and labour for tubes 40mm bore medium grade galvanised with all fifting and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Supply and fix 20mm Gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as sprcified and directed.

ASHIRWAD ELECTRICALS

DHAIRYASIL RAMAKANT DESAI

RAJENDRA KRISHNA SARAF

DHANSHRI ENTERPRISES

M/s. VIJAY ELECTRICALS