Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹84.8 LAccepted-AOC SHINANDAN ROYAL PLOT NO 41 HOUSE NO 101 BHAMTI NAGPUR 440022 | NAGPUR | NAGPUR | MAHARASHTRA | 440022 | L1 | Accepted-AOC L-1 Being the lowest bidder | |
| 2 | L2₹89.7 L+₹4.9 L (5.76%)Rejected-Finance 2ND FLOOR S 30 GINGER SQUARE JARIPATAKA NAGPUR | NAGPUR | NAGPUR | MAHARASHTRA | 440014 | L2 | Rejected-Finance Quoted value higher than L-1 | |
| 3 | L3₹1.1 Cr+₹29.1 L (34.3%)Rejected-Finance 5TH FLOOR FLAT NO 502 PARVATI APARTMENT TAYWADE NAGAR BESIDE D MART BELTARODI ROAD NAGPUR 440037 | NAGPUR | NAGPUR | MAHARASHTRA | 440037 | L3 | Rejected-Finance Quoted value higher than L-1 | |
| 4 | Rejected-Technical | - | Rejected-Technical Documents not as per NIT |
Tender Value
₹1.1 Cr
EMD Value
₹1.4 L
Closing Date
9 Sept 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SO(C), Umrer Area
O/o AGM, Umrer Area, WCL.
Repair, maintenance and re-carpeting/blacktopping of balance internal colony road under Town Administration of Umrer Area. (Phase-II) (2nd Call)
2023_WCL_287024_1
um4550-civ-0029-2023-24
Open Tender
Civil Works - Roads
Item Rate
60 days
Umrer
Please refer tender document
5 documents required · 5 mandatory
₹1.4 L
8 Dec 2023
25 Aug 2023
11 Sept 2023
26 Aug 2023
9 Sept 2023
26 Aug 2023
26 Aug 2023 - 1 Sept 2023
Amount
Item Description/ Heading
Filling Pot- holes and Patch Repairs with open - graded Premix surfacing, 20mm. Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 510, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2
Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as per clause 504 of specifications. a) Using Batch Mix Plnt of appropriate capacity and Paver finisher Hydraustatic with Sensor. (ii) for GradingII(19 mm nominal size) bitumen content 3.5%
Providing and laying dense bituminous macadam using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5% by weight of total mix of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 505 of specification complete in all respects. a) Using Batch Mix Plnt of appropriate capacity and Paver finisher Hydraustatic with Sensor. (ii) for GradingII(19 mm nominal size)
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats all complete as per clause 511 of specification. (ii) Case - II : Type B (Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 75 tonnes/ hours using crushed stone chipping (aggregate shall pass 2.36mm seal and retained to 180 micron sieve) and penetration bitumen of suitable grade all complete as per clause 511 of specification.
Providing and applying tack coat with low viscosity bitumen of VG 10 grade using bitumen pressure sprayer on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. (ii) @0.30 kg per sqm (dry & hungry bituminous surfaces /granular surfaces treated with primer)
Providing and applying tack coat with low viscosity bitumen of VG 10 grade using bitumen pressure sprayer on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. (i) @ 0.25 kg per sqm (normal bituminous surfaces)
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kinds of soil
Carraige of material with machine loading over distance upto 1.00 Km including loading and unloading Earth, murrum, building rubish
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 . The finished surface to be level, uniform and free from streaks and holes.complete.
Total impact of GST for the purpose of CTC
S.K. CONSTRUCTIONS
Pravis Enterprises Pvt. Ltd.
stage.html
html • 0.05 MB
techsummary_297188.pdf
PDF • 3.23 MB
BOQ Comparative Chart
xlsx • 0.01 MB
finsummary_297188.pdf
PDF • 2.25 MB
AW1941.pdf
PDF • 2.93 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .