balance work of Guad hut Gool distt Ramban civil works

Amount

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S.. Flats , square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc.

Providing and fixing of 35 mm panelled or panelled and glazed shutters for doors , windows and clerstory windows including IsI marked M.S.Pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately , all complete as per direction of engineer-in charge Second class deodar wood .

Providing and fixing panelling for pancelled or panelled and glazed shutters 25 mm to 40 mm thick with plain Particle board 12 mm thick flat pressed, 3 ;layer or graded wood particle board medium density grade 1, IS : 3087 marked.

Providing and fixing 30 mm thick glazed shutters for doors, windows and clearedstory windows using 10 kg/sqm .(4 mm thick ) float glass panes including ISI marked M.S butt hinges bright finished of required size with necessary scress. Second class deodar wood.

Providing and fixing 30 mm thick wire gauze shutters using galvanised M.S wire gauze of average width for apeature 1.4 mm in both direction with wire of dia 0.63 mm for doors, windows with necessary screws ISI marked M.S pressed bright finished butt hinges with necessary screws required size second class deodar wood .

Providing and fixing cermic glazed floor tiles 300x300 mm thickness to be specified by the manfactures) of Ist quality conforming of IS 13555 OF NITCO,ORIENT , SOMANY, KAJARIA or equivalent make in colour such , as white, lvory, Grey, Fume Red Brown laid on 20 mm thick bed of cement Mortar 1:4(1 cement:4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete .

Providing and fixing Ist quality ceramic glazed tiles conforming to IS; 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour , shades except begundy , bottle green, black of any size as approved by Enginers- in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 ( 1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing wood work in frames of false ceiling, partitions etc.sawn and fixed in position. Second class Kail wood.

Providing and fixing of hard board ceiling sheet of approved quality with & necessary nails etc complete.( frame work to be seperately) 6 mm thick ply.

Making plinth protection 50 mm thick of cement concrte 1:3:6 ( 1 cement: 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth . Crushed .

Brickwork withcommon burnt clay F.P.S.(non-modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:4 ( 1cement : 4 coarse sand)

Half brick masonry with bricks of class designation 75 in foundations and plinth in. Cement mortar 1:4 ( 1 cement : 4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix. 1:4 ( 1 cement : 4 fine sand)

Cement concrete flooring 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc complete (50mm thick with 20mm nominal size stone aggregate.crused.

Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm Dry brick masonary honey comb shaft with bricks of class designation 75 and S.W drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With F.P.S bricks.

Providing and fixing aluminium handles ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent ot fyed to required colour and shande with necessary screws etc. complete.

providing and fixing aluminium tower bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing aluminium sliding door bolts ISI marked anodised ( anodic coating not less than grade AC 10 as per IS : 1868) transparent of dyed to required colour or shade with nuts and screws etc. complete. 300x16mm.

Providing and fixing aluminum Door Stoppers ISI marked anodised ( anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete(Twin Rubber Stopper)

Providng and fixing wind ties of 40x6mm flat iron section .

providing and fixing of 20 mm dia bolts 2"-6" long and threaded upto 1'-0"

Finishing walls with water proofing cement paint of required shade . New work ( Two or more coats) applied @ 3.84 kg /10 sqm .

Distermpering with oil bound washable distemper of approved brand and manufacture new work ( two or more coats) over and including priming coat of cement primer.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work over an under coat of suitable shade of ordinary paint of approved brand and manufacture.

Providing and fixing glass strips in joints of terrazo/ cement concrete floor 40mm wide with 4 mm thick.

Repair to plastr of thickness 12 mm to 20 mm in patches of area 2.5 sq. metres and under including cutting the patch in proer shape raking out of joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead . With cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm sand cast iron P or S trap, 10 litre low level P.V.C. flushing cistern including flush pipe ( of approved make) manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. Long pan pattern with vitreous china W.C. pan of size 580 mm.

Providing and fixing wash basin with C.I/M.S. brackets, 15 mm C.P. brass pillars taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.p. brass pillars taps.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing salem stainless steel A ISI-304(18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug , 40 mm including painting of fittings and brackets cutting and making good the walls , wherever required 610x510 mm bowl depth 200 mm.

Providing and fixing PVC waste pipe for sink or wash basin including P,V,V waste fittings complete.32 mm dia.

Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm .

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved qaulity and colour . 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm , weighing not less than 170 gms.

Providing and fixing PTMT shelf 440 mm long 124 mm width and 36 mm height of approved quality and colour weighing not less than 300 gms.

Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia.

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank ISI: 12701 marked including the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank ( Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license).

Providing and fixing C.P brass long nose bib cock of approved quality conforming to IS standards and weighting not less than 810 gms. 15 mm nominal bore.

Providing and fixing C.P brass angle valve for basin mixer and gyser points of approved make conforming to I.S : 8931. 15 mm nominal bore.

Providing and fixing C P stop cock (concealed ) of standard design and of approved make conforming to I S: 8931 complete . 15 mm nominal bore.

Providing and fixing C.P brass close hole basin mixer piller tap of approved quality and make.weighting not less than 1.970 kg. 15 mm nominal bore of standard back type.

Providing and fixing 3 layer PP-R (poly propylene Random copolymer) pipes SDR 7.4 UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polyproplyene randome fitings I/C fixing the pipe with clamps at 1.00 m spacing . This incldes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) Pn-16 pipe ,25 mm OD.

Providing and fixing uplasticised PVC connection pipe with brass unions. 30 cm length.

Providing and fixing 3 layer PP-R (poly propylene Random copolymer) pipes SDR 7.4 UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polyproplyene randome fitings I/C fixing the pipe with clamps at 1.00 m spacing . This incldes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) Pn-16 pipe ,32 mm OD.

Construction of brick massonry manphole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C top slab with 1: 2:4 Mix( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1: 2: 4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standad design.Inside size 90x80 cm and 45 deep including C.I. over with frame ( light duty) 455x610mm . internal diamension totoal weight of cover and frame to be not less than 38 kg ( wight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 & with Crushed stone aggregate.

Providing and fixing of P.V.C floor traps

Providing and fixing of P.V.C Bend

Providing and fixing of P.V.C .Tee.

Carriage of Material by Machenical Transport including Loading , unloading & stacking at site complete.

Sand (av.distance of 30 km)

Stone aggregate upto 40mm (av.distance of 30 km)

Bricks (av.distance of 225 km)

Carriage of Material by Manual labour including Loading , unloading & stacking at site complete.

Sand (av.distance of 800 mtr)

Stone aggregate upto 40mm (av.distance of 800 mtr)

Bricks (av.distance of 800 mtr)

JavedSohail

Shakeel Ahmed

GULZAR AHMED TRAGWAL