Loading
Loading…
Loading…
Tender ID
Tender Value
Refer Docs
Closing Date
17 Feb 2026, 3:00 pmClosed
Single Packet
Normal Tender
No
Total Value Wise
Lowest to Highest
TPI Agency
Not Applicable
Expenditure
General
03
1 condition · 1 needing a document upload
OEM or their authorised dealer can quote. Firms should confirm the specification in writing.
18 conditions · 6 needing a document upload
1. Unloading : By KRCL 2..Delivery terms : FOR Destination 3.Delivery period : Within 45 days. Material strictly to be delivered within 45 days at delivery address. Firm is requested to confirm delivery period in writing. 4.Paying Authority : DYFA / Reasi /Project. 5.GSTN no. of J&K is 01AAACK3725H1Z2. 6.Firm to mention GSTIN NO. & corrcet 8 digit HSN Code, RTGS / NEFT details with cancelled cheque, copy of PAN Card. 7.Firm to enclose MSME / NSIC certificate if any with category like SC/ST/Women etc to avail the benefit of MSME / NSIC.
Consignee details :SSE/ Signal / Incharge /SGDN. Consignee Address: Konkan Railway Corporation Ltd. USBRL Project office, Geeta Nagar, Tritha, Reasi -182311, Jammu and Kashmir.
Firms should quote for Make- Crompton Greaves or similar suitable for existing Crompton Greases point machine.
As per prevailing conditions
The tenderers in their bids shall indicate the details of their GST Jurisdictional Assessing Officers (Designation, address & email id). In case of a contract award, a copy of the LOA/Purchase Order shall be immediately forwarded by Purchaser to the Jurisdictional Assessing Officer mentioned in the Tenderer's bid.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Payment Terms
1. 80% payment shall be made on receipt of the items in satisfactory condition, against suppliers challan certified by consignee and inspection certificate issued by the nominated inspection agency. 2. Balance 20% payment shall be made after successful installation, commissioning and acceptance of the equipment by consignee subject to submission of Bank Guarantee for 5% of the contract value for warranty obligations, valid beyond 6 months period of warranty.
3 conditions
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.
Delivery Period: No deviation from the Delivery Period stipulated in the tender is permitted.
2 locations across Jammu And Kashmir · 28 Set · 79 Numbers total
Spares for 220mm stroke point machines
0326D0067
0326D0067
Limited - Indigenous
Goods
Reasi, Jammu And Kashmir
₹0
Exempted
17 Feb 2026
5 Feb 2026
7 items · 28 Set · 79 Numbers total
Ground connection for IRS Point machine IRS-S-24/90 as per RDSO Drg No S-3395 S-345 4 with insulation set nut bolts.(Suitable for 220mm thro point machine manufacturd by Cromptan Gre aves and DTPL.) [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/SIGNAL / INCHARGE /SGDN/ REASI | Jammu And Kashmir | 8.00 Set |
| Total | 8 Set | |
Supply of Carbon Brush suitable for IRS point machine 110v.DC high thrust low current magnetic field motor IRS:S- 37/82 Drg.No.S-10910 and 10850 IRS:S:24/2002 using in Railway S and T Gears [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/SIGNAL / INCHARGE /SGDN/ REASI | Jammu And Kashmir | 60.00 Numbers |
| Total | 60 Numbers | |
Supply of Insulation set for 220mm IRS point machine ground connection,using for 60 K g rail, as per RDSO drawings [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/SIGNAL / INCHARGE /SGDN/ REASI | Jammu And Kashmir | 10.00 Numbers |
| Total | 10 Numbers | |
Supply of Detector Slide - one LH and one RH as per RDSO drawing No. RDSO/S 10810/8 11 or latest [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/SIGNAL / INCHARGE /SGDN/ REASI | Jammu And Kashmir | 10.00 Set |
| Total | 10 Set | |
Supply of 110v.DC high thrust low current maganetic field motor as per IRS:S-37/2022 w ith latest amendment/revision with Drg.No.S-10910 & 10850, suitable for IRS:S:24/2002 & latest Amd. (clamp type point machine using for 60 Kg. rail, manufacturer Crompton Greaves) [ Warranty Period : 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/SIGNAL / INCHARGE /SGDN/ REASI | Jammu And Kashmir | 7.00 Numbers |
| Total | 7 Numbers | |
Supply of CONTACTOR UNIT ASSEMBLY - COMPLETE for 220 mm stroke Point Machine a s per RDSO Drawing Number RDSO/S 10911 suitable for Crompton & Greaves Point Machine [ Warran ty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/SIGNAL / INCHARGE /SGDN/ REASI | Jammu And Kashmir | 2.00 Numbers |
| Total | 2 Numbers | |
Supply of Lock Slide - one LH and one RH as per RDSO drawing No. RDSO/S 11006/007 or latest [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/SIGNAL / INCHARGE /SGDN/ REASI | Jammu And Kashmir | 10.00 Set |
| Total | 10 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
IRSKR_1.pdf
ATTACHMENT
Certificatebypurchaseofficerwhilepublishingtender.pdf
ATTACHMENT
Bidsecuringdeclaration.pdf
ATTACHMENT
InstructionstoTenderers-Updated150621.pdf
ATTACHMENT
Declaration-HigherratesofTDSfornonfilers.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .