TN_106/3

Amount

Road Work: Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned, up to a land of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. i) By Manual Means. A) In area of non thorny jungle.

Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.50 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) From Private Land

Construction of sub-grade and earthen shoulders with approved materials obtained from borrow pits with all lead and lifts, transporting to site, spreading, grading to required slopes and compacting to meet required Table 300-2 with lead up to 1000 m as per Technical Specification Clause 303.1. (i) From Private land

Construction of gravel/Soil-aggregate base by providing well graded material spreading in unoform layer with motor grader on prepared surface, mixing by mix in place method with rotavaror at OMC, and compecting with three wheel 80-100 KN static roller to achieve the desired density, complete as per Technical Specification Clause 402.

Providing, laying, spreading and compacting stone aggregate of specification size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 8-10 tones proper grade in stages to proper grade and camber, applying and brooming, stone screening binding materials to full up the interstices of coarse aggregate, watering and compacting to the required density. (A) By Manual Means (iii) WBM Grading-3

Interlocking concrete block pavement, (i) Providing and laying interlocking concrete block pavement having thickness 80mm as per technical specification clause 1504.

Furnishing and laying of the live sods of perennial turfing grass on embankment slope, verges or other locations shown on the drawing or as directed the Engineer including preparation of ground, fetching of sods and watering as per Technical Specification Clause 309.

Direction and Place Identification signs up to 0.90 sqm size board. A. Retro reflective Traffic Signs. (i) Providing and erecting direction and place identification retro-reflective signs as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 2mm thick with area not exceeding 0.9 sqm suported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701.

Traffic signs, Providing and fixing retro reflectorised cautionary, mandatory and informatory sign as per IRC: 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45mm x 45mm x60mm, 60mm below ground level as per approved drawings and Technical Specification. (ii) 60cm equilaterial triangle.

LAJIK BRAHMA

Sri Bishnu Basumatary