Construction of public toilet with urinals in mattuthavani bus stand platform 3 and 4 gents and ladies toilet in ward 33

Amount

Charges for Putting borehole of size 23 / 30 cm dia for file foundation in Sandy and Other loose soil by using hand Boxing set Rate Shall be include the cost of Labour for Boxing Fule Charges for Auger Bore and Other T & P Employed etc., complete

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc.,complete - Open Earth Work excavation

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. - For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. - Upto Basement

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) - Ground Floor

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Ground Floor

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 sqm 8313.00 The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer. - Size 1.20 X 2.10m

UPVC Ventilator Specification: Supplying and fixing UPVC (Un- Plasticized Polyvinyl Chloride) Lotivered Ventilators oJ from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles ore reinforced with GI/1mm 125GSM and 1009 corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPOM rubber (black colour) oovered with all over the edges of llama and shutter The corners and joints should be welded and cleaned Radiations pin headed glass 4mm thick should be provided in tile louvers. The window should be fixed to the wall with 1009a packing with scraws and silicon packing all round the frames. The vendlator should be got approved from the Executive Engineer before use on work.

Plastering with cement mortar 1:5 (One cement and five plastering sand (P- Sand)) 12mm thick in all floors including cost and conveyance of all materials to site etc,complete as per standard specifications

Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

White washing Two coats using freshly burnt shell lime, in all floors, including cost of lime and other materials such as brushes, kanjee, scafolding charges etc. Complete.

Painting two coats of newly plastered wall surface with approved cement paint over cement plastered wall surface, ceiling and including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required and cost of painting materials, brushes, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer

Painting the new iron work with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer.

Supplying and filling the basement with Well Gravel filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). SD 23

Supply and fixing of single box type 4'36 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 87

Construction of inspection chambers of following sizes with earth work excavation for foundation , 23cm thick concrete bed using 40mm brick jelly concrete in cm 1:4:8 for foundation , brick work in cm 1:6 for chamber , plastering with cm 1:3 , 12mm thick , benching , channelling , supplying and fixing 45X45cm medium weight L.S cover and frame etc.complete.., (Size 60X60)

Supply and fixing of AC Exhaust Fan 450 mm (18”) sweep (Heavy duty) including cost of all materials,/abour, lead, lift, etc complete

Supplying and Fixing for 18W 4 Feet LED fitting with LED including Labour Charges Etc Complete

Supply and flxing in position of best lndian make white / colour glazed earthenware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with Gl pipe, 32mm dia bell mouth PVC connection and wasle pipe, 1smm dia Gl pipe of required length, 1smm dia GM wheel valve, 1smm dia brass nipple 2 Nos., and fixing lhe urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masonry and re.dolng the same to the original condition, etc., including painting the pipe with two coats of best quality approved synlhetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental otficers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape, 32mm diametre C.P.Waste union, 32mm diametre P.V.C.waste pipe with rubber plug and chain, 15mm diametre G.M.wheelvalve, 15mmdia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I.brackets with teakwood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc.,complete complying with standard specifications

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever ne@ssary. (Taps should be got approved by lhe Executive Fnoineer be-fore use on the works) Pillar Tap

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supptying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with Cl pipe of 100mm dia / PVC pipe of 11omm dia, double flapped rigid PVC black seat and seat cover wilh CP brass hinges including cost of while cement, @ment for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC I 12.5 lilets capacity porcelin low level flushing tank with a pair of Cl brackets, etc., complete with all fittings such as 'lsmm brass ball valve with polythene float wilh brass handle, union, coupling connected by means of 40mm white PVC flush hand using lndian adopter joint including all internal

Supplying and fixing position Cl Nahani Trap / Floor Trap of the followingsizes with best stainless steel gratings of approved brand and quality,fixed over a bed of brick jelly lime consete 1;2:5 (One part of lime, two part of Sand and llve part of 40mm gauge brick jelly) and finished with Cement Mortar '1:3 (One Cement, Three Sand ) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to lhe Cl / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer

Supply and delivery and Iixing of HDPE tank as per lS 12701 / 1996including loading,unloading, transportation and labour charges for fixingof the Gl pipes and specials for pipe connection works including cutting, lhreadino and flxino charoes elc.. (1000 Litre Capacity)

Supply of PVC Pipe and Specials etc Complete - 32mm PVC Pipe

32mm PVC Coupler

32mm PVC Bend

32mm PVC Elbow

32mm PVC End Cap

32mm PVC Tee

32mm Non Return Valve

75mm PVC Pipe

75mm PVC Coupler

75mm PVC Bend

75mm PVC Elbow

75mm PVC End Cap

75mm PVC Tee

110mm PVC Pipe

110mm PVC Coupler

110mm PVC Bend

110mm PVC Elbow

110mm PVC End Cap

110mm PVC Tee

PVC Adhesive (Solution) - 100Gram

Supply of 150mm dia P.V.C casing pipe As Per IS 12818/2010 (Outer Casing)

Labour Charges For the erection of Submerisble Pumpset in Borewell/Openwell including fixing and jointing submersible Cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN Switches starter,voltmeter ,Ammeter ,Three pilot (Indicating) lamps capacitor single phasing preventor , water level guard and laying and jointing the cables and twin earthing as per IE Rules etc.,complete and testing the pumpset and trail run for 10 Days

Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another with in Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary rigs, fuel, labour and drilling bentonite and water required for drilling at site ( Site will be shown by the TWAD Board Officers) including construction of mud pit. From 120 m upto 150 m Depth ending from ground level

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by Officers and conducting yield test by ‘V’ notch method.

Supply and Delivery of Clear Water Vertical Wet Type Submersible Pumpset Suitable For 150mm Dia Borewell Conforming to IS 8034/2002 With latest amendments and BEE 3 Star rated capable of Discharging noted LBM Against head of water column due to all causes.the pump shall be with stainless steel shaft and dynamically Balanced bronze or Cast SS Impeller,Brass screws and CI FG 200 Grade Pump Bowl/Difuser with ISI Mark.The Pump Shall be directly Coupled to a Continuous rated two pole Suitable wet Type Vertical Squirrel cage induction motor as per IS 9283 Suitable for Operation in AC 3 Phase 415 V+/- 10 % , 50 HZ +/-5% Duty (50 lpm x 100m) Three Phase Submersible Pumpset Suitable for 150mm Dia Borewell As Per IS 8034/2002 Witout Panel Board

Supply and Delivery of Direct Online Starter Confirming to ISI 13947 and IEC 947 Suitable KW Rating for Operation in AC/Single Phase/50HZ (+ 5%) and 415 V (+-10%) Including Ammeter,Voltmeter ,Thermal ,Overload Relay , 16Amps 2 Pole Magnetic Contactor with Under Voltage Protection , Indication Lamp,Starting Capacitor,running Capacitor and On/Off Push Button Switches,5 Way Connector , wiring with 1sq.mm / 1.5sq.mm Copper PVC Insulated Cable,Powder Coated Vermin Proof Box including the Capacitor (the Costy of Capacitor is to be taken Separately) Etc.Complete.THREE PHASE PANEL BOARD - D.O.L WITH TWO LEVEL GUARD AND AUTO START (3HP Submerible Pumpset)

Supply of PVC pipe sand GI pipes and specials. - 32mm UPVC Pipe

32mm UPVC Pipe

32mm G.M Gate valves

32mm GI Bend

32mm GI Hex Nipple

32mm GI Union

32mm G.I Elbow

32mm G.I Tee

32mm G.I pipe

32mm G.I.couplings

40mm Clamp set

150mm bore well cover

25mm PVC Pipe WORKING PRESSURE: 10 kg. per cm2

25mm PVC Coupler

25mm PVC Tee

25mm PVC Elbow

25mm PVC Bend

Brass chromium plated screw down Tap 15 / 12mm Dia (Heavy Type)

Nylon Rope Yellow Polypropylene Rope, 220 m, >10 mm

Supply and delivery of PVC insulated and sheathed 3.00 Core Flat Type 4.00 sq mm copper cable conforming to IS 694/1990 suitable for submersible pump set of Standard Specification

Add GST 18%

KARUPPASAMY (BID ID -1284154)