Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹8.7 L
EMD Value
₹17,449
Closing Date
25 Apr 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Accessories Division, Lucknow
HINDUSTAN AERONAUTICS LIMITED Accessories Division, Lucknow Post Office, Lucknow - 226 016 Uttar Pradesh, India
Electrical work for Renovation of ASERDC Entrance/Ground Floor
7000
HAL-ADL/9995/DESIGN-ENTRANCE/RET/23-24/20
Works
Accessories Complex - Lucknow Divn - Plant Maintenance
₹0
₹17,449
25 Apr 2024
15 Apr 2024
15 Apr 2024
25 Apr 2024
HINDUSTAN AERONAUTICS LIMITED ACCESSORIES DIVISION, LUCKNOW PQ FORM/ELIGIBILITY CRITERION-MATRIX
NAME OF THE WORK: "Electrical work for renovation of ASERDC Entrance/Ground Floor"
Estimated Cost (in Rs.) 872,433.00
S# Intending bidders must meet the following eligibility criterion: Remarks to be filled by Bidder
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
4 Address of Correspondence
5 Contact Details: Contact person name: Designation: Mobile No:. Ph. No. with STD code: Email Id :
6 Contractor must give his acceptance to provide services as per ‘Requirement, Scope of work, Drawings’ and ‘Terms & Conditions' contained in Technical Bid.
7 Self attested copy of PAN/GIR No. Registration certificate issued by income tax authority.
8 Sel attested Copy of GST Registration Certificate.
9* Average annual turnover during the last 3 years, ending 31st March of previous financial year, should be at least 30% of the approximate estimated amount put to tender. Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year i.e. Fin Year 2020-21,2021-22 & 2022-23 261,730.00
10* Valid “A” class Electrical contractor licence of appropriate voltage issued by any state Govt. Under clause 45 of Indian Electricity Rules 1956 or as amended from time to time.
11* The Solvency required will be 40% of the approx. estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 months from the final date of Submission of tender.(in Rs.) 348,974.00
12* EMD amount (in Rs.) 17,449.00
13* Self attested Copy of PF Code Certificate(if applicable).
14* Self attested Copy of ESI Number certificate (if applicable).
15* Experience of having successfully completed similar works as indicated in the work details during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following (in Rs.):-
i Three similar completed each work costing not less than 40% of estimated amount. OR 348,974.00 PO no.: Value : Completion Date: Customer:
348,974.00 PO no.: Value : Completion Date: Customer:
348,974.00 PO no.: Value : Completion Date: Customer:
ii Two similar completed work costing not less than the amount equal to 50% of the estimated cost. OR 436,217.00 PO no.: Value : Completion Date: Customer:
436,217.00 PO no.: Value : Completion Date: Customer:
iii One similar completed work costing not less than the amount equal to 80% of the estimated cost. 697,947.00 PO no.: Value : Completion Date: Customer:
16 DECLARATION I ACCEPTED/NOT ACCEPTED
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
17 DECLARATION II ACCEPTED/NOT ACCEPTED
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. 5.I/We are not debarred / blacklisted from any Govt agencies, if debars for specified period reason for debar and copy of resumption of same shall be provided. 6. I/We have not concealed any information which may adversely effect my qualification.
19 DECLARATION III COMPLIED/NOT CPMPLIED
I/We declare and confirm that all the documents related to NIT mentioned at SI.No.2 and 3 have been attached with the technical bid.
Name of Bidder:
* 1. To be filled by Bidder essentially and carefully. Supporting documents must be attached as proof. Clarifications shall be sought w.r.t. information provided with tender documents. 2. Similar works implied that works related to HT/LT Electrical Works in nature. Mere supply of electrical goods does not mean qulification in the tender. 3. Scanned copy of completed work orders and completion certificate issued by respective clients to be attached. If the completion certificate is form private organization the same shall be uploaded with TDS certificate. 4. The work shall be completed as a whole, Partial value/completion will not be considered. 5. The Bidders are requested to attach scan copies of all the relevant / desired / required proofs/ documents on e-portal, failing which tender shall be summarily rejected without assigning any reason to bidders.
Name of Work: “Electrical work for renovation of ASERDC Entrance/ground floor ”
S# DESCRIPTION OF WORK UNIT Total QTY RATE AMOUNT
Light/Fan/Exhaust Fan Point wiring
1 Supply & making One Light point/fan point/exhaust fan point/call bell point controlled by one modular type switches, 6 Amps 230 Volts with 1.5 sqmm, P.V.C. insulated, copper FRLS type conductor multi stranded wire of 1100/660 Volts grade in heavy duty P.V.C. pipe with modular switch, modular plate, suitable GI box and earthing the point with 1.5 Sq mm FRLS PVC insulated copper conductor single core etc. including all accessories such as bends, J.B,tees, ceiling rose, batten holder etc. required for point wiring work. The pipe shall be laid concealed in wall; partially it may be flush to the wall as per site requirement. (a) Only Supply Nos 40
(b) Only Installation Nos 40
2 Add to the above Item-1 for each addition on only light points on the same switch circuit including all materials required for such wiring work. (a) Only Supply Nos 80
(b) Only Installation Nos 80
3 Supply & making One (half point) with 5 pin, 6 Amps modular socket controlled by 6 Amps switch modular type on the same board with other switches with 1.5 sqmm, PVC. insulated,copper FRLS type conductor, multi stranded wire. (a) Only Supply No. 10
(b) Only Installation No. 10
Sub-main/Circuit Wiring
4 Wiring for circuit /submains wiring alonghwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed heavy duty class PVC conduit as required
i 2 x 2.5 sqmm (for phase & neutral) + 1 x 2.5 sqmm (for earth) (a) Only Supply Mtrs 150
(b) Only Installation Mtrs 150
ii 2 x 4 sqmm (for phase & neutral) + 1 x 4 sqmm (for earth) (a) Only Supply Mtrs 100
(b) Only Installation Mtrs 100
5 Supply & making One independent domestic power point with 3 pin, 5/6 Amps modular socket controlled by 5/6 Amp modular switch, including 3 module GI box along with modular base and cover plate for modular switches, connections to switches etc as required. (a) Only Supply Nos 15
(b) Only Installation Nos 15
6 Supply & making One independent domestic power point with 5 pin, 15/16 Amps modular socket controlled by 15/16 Amp modular switch, including 3 module GI box along with modular base and cover plate for modular switches, connections to switches etc as required. (a) Only Supply Nos 15
(b) Only Installation Nos 15
7 Supply & Fixing suitable size GI Box with Modular plate and cover in front on surface or in recess including proving and fixing 25A modular socket and 25A modular SP MCB "C curve including connection, painting etc. as required. (a) Only Supply Nos 4
(b) Only Installation Nos 4
8 Supplying and fixing of 25MM of Heavy class PVC conduit for dressing of LAN/WAN/telephone cable along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make: AKG/CAP/Anchor/MODI) (a) Only Supply Mtrs 100
(b) Only Installation Mtrs 100
9 Supply and installation of three phase, double door MCB DB suitable for incorporating MCB's, 4 way per phase with following incoming and out goings MCB's Incoming- 63 Amps, TPN Isolator,:MCB-01 No., Outgoings: 10-32 Amps S.P. MCB –12 Nos. The D.B. must be installed flush to the wall and wall must make good after fixing. (a) Only Supply Nos 1
(b) Only Installation Nos 1
10 Supply and installation of three phase, double door MCB DB suitable for incorporating MCB's, 6 way per phase with following incoming and out goings MCB's Incoming- 63 Amps, TPN Isolator,:MCB-01 No., Outgoings: 10-32 Amps S.P. MCB – 18 Nos. The D.B. must be installed flush to the wall and wall must make good after fixing. (a) Only Supply Nos 1
(b) Only Installation Nos 1
11 Supply and Fixing 125 A, 4 pole MCCB complete with box including , driling holes, connection, cable termination flush to the wall or on surface etc as per direction of EIC. (a) Only Supply Nos 1
(b) Only Installation Nos 1
12 Supply & Laying of XLPE insulated, PVC sheathed Armored, 1.1 KV grade, Aluminium conductor power cable, conforming to IS 7098 (Part-I). Concealed cabling can be done to cut/chase the wall/floor, laying cable tray (provided by HAL) and after laying of cable wall/floor shall be finished as original & if cable laid on wall then use clamps for fixing the cable. The work also includes connection work which includes all the required materials for their jointing work. Cable to be laid as required at site and as per the direction of Engineer-In-Charge.
(a)Size of cable 4 core x 25 sqmm (Only Supply) Mtrs 60
(b)Size of cable 4 core x 25 sqmm (Only installation) Mtrs 60
End/Straight Trough Joint
13 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
(a) 4C x 25 Sqmm.Al Arm LT cable.(Only Supply) Nos 8
(b) 4C x 25 Sqmm.Al Arm LT cable.(Only Installationy) Nos 8
14 Supplying and making straight through joint with heat shrinkable kit including ferrules and jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
i (a) 3.5C x 95 Sqmm. Al Arm LT cable. (Only Supply) Nos 2
(b) 3.5C x 95 Sqmm. Al Arm LT cable. (Only Installation) Nos 2
ii 3.5C x 120 Sqmm.Al Arm LT cable.(Only Supply) Nos 2
3.5C x 120 Sqmm.Al Arm LT cable.(Only Installation) Nos 2
15 Supplying and Installing 200 mm width x 50 mm depth x 1.6 mm thickness M.S. Cable trays with cover, with powder coating M.S. cable trays, Bends, tees etc as required with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts and nuts painting suspenders etc as required. Work Also required proper dressing of cables on the trays with required accessories. (a) Only Supply Mtrs 100
(b) Only Installation Mtrs 100
16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (a) Only Supply Mtrs 50
(b) Only Installation Mtrs 50
Removal of Old Wiring
17 Removal of old Cables, Wires, Light Fitting, fan and DB, MCB DB and all other accessories required to meet the scope of work at site and at nearby location like passage, Gallery etc after tracing of live and non live wires of electrical, Lan and Telephone thereafter dressing of cable as directed by EIC. Mtrs 150
Lighting Fixtures
18 Supply & installation of Slim suspended light, 20W with efficacy greater than 110 Lm/W, cool white with complete accessories required for installation, hanging work etc. as per direction of EIC. (a) Only Supply Nos. 15
(b) Only Installation Nos. 15
19 Supply & installation of 3/5 Watt COB Spot LED Light, Round, warm white/cool white with complete accessories required for installation etc. as per direction of EIC. (a) Only Supply Nos. 80
(b) Only Installation Nos. 80
20 Supply & installation of 12 W panel light, Round, warm white/cool white with complete accessories required for installation etc. as per direction of EIC. (a) Only Supply Nos. 30
(b) Only Installation Nos. 30
21 Supply & installation of 2mtr length profile Light, with end cap, back clips, front diffuser etc complete accessories required for installation etc.as per direction of EIC. (a) Only Supply Nos. 60
(b) Only Installation Nos. 60
22 Supply & installation of Strip LED light, warm white/cool white, 5 mtr length with driver complete, 20 watt, IP20 for installation in profile light complete with accessories required for installation etc.as per direction of EIC. (a) Only Supply Nos 50
(b) Only Installation Nos 50
23 Supply & installation of Focus Light, 9 Watt, warm white/cool white with complete accessories required for installation etc. as per direction of EIC. (a) Only Supply Nos. 20
(b) Only Installation Nos. 20
24 Supply & installation of wall Light, 2x5 watt, Round, warm white complete with accessories required for installation etc. as per direction of EIC. (a) Only Supply Nos. 15
(b) Only Installation Nos. 15
25 Supply & installation of Cove Light, 5 mtr with driver, 24 watt,complete with accessories required for installation etc. as per direction of EIC. (a) Only Supply Nos. 15
(b) Only Installation Nos. 15
26 Supply & installation of Flood Light, 70 W, 230V,inbuilt driver, IP66, impact and corrosion resistant with accessories required for installation etc. as per direction of EIC. (a) Only Supply Nos. 10
(b) Only Installation Nos. 10
27 Supply & installation of RGB Flood Light, 30 W, 230V,inbuilt driver, IP66, impact and corrosion resistant with accessories required for installation etc. as per direction of EIC. (a) Only Supply Nos. 10
(b) Only Installation Nos. 10
28 Supply & installation of Spike graden Light,RGB, 12 W, 230V, impact and corrosion resistant with accessories required for installation etc. as per direction of EIC. (a) Only Supply Nos. 15
(b) Only Installation Nos. 15
GST @18% on SUB TOTAL
Name of Bidder:
Note: PLEASE REFER CHAPTER 6(B) OF TECHNICAL BID FOR APPROVED MAKES OF ITEMS & EQUIPMENTS FOR THIS WORK .
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
NIT.pdf
TENDER_DOCUMENT • 1.02 MB
TECHNICAL_BID.pdf
TENDER_DOCUMENT • 0.84 MB
ELIGIBILITY_CRITERION_MATRIX.xlsm
TENDER_DOCUMENT • 0.01 MB
PRICE_BID_.xlsm
TENDER_DOCUMENT • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .