8316 SPECIAL REPAIRS TO OFFICERS TOILET GENTS and LADIES AT DEPT OF SURGERY and UNSERVICEABLE LANDSCAPE LIGHTING NEAR DIAMOND JUBLIEE BLOCK AT AFMC UNDER GE CENTRAL PUNE

Amount

Taking down angle iron/ wooden chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sq. m but n. exc.4sq m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with M.S square tube, supplying & fixing in opening as per specifications, drawings complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting, of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat molded plain co lour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck inside with solvent cement for steel & plain co lour PVC sheets for top rail, lock rail& bottom rail on either side & or gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet banding, and joints to gather with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed..

S&F ventiltors/ louvers with parttially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc complete all as specified and directed. (a) SP 20048 (b) Glazing clips 19352

S & F 100 mm long butt hinges medium weight , cold rolled Mild steel for door shutters complete all as specified and directed..

S&F 150 mm aluminium anodized barrel tower bolts of extruded section for door shutters complete all as specified and directed..

S & F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed..

Demolition of brick work or stone/ boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles and rubbish off the primises (outside of MoD land) complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) gde D-5 and setting in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises (outside of MoD land) complete all as specified and directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 over Stone /brick / concrete wall surfaces trowelled to even & smooth w/o using extra cement for internal wall surfaces complete all as specified and directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over and including 2 mm thick wall care putty complete all as specified and directed.

M & L for 600 x 300 x 6 to7 mm thick, coloured glazed vitrified tiles as in skirting/dado set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces all as specified

M&L Non skid ceramic colored tiles 400x400x7to8mm thick, (square/ rectangular) in floor etc.set and jointed in neat cement slurry & pointed in white or coloured cement to match.including 15mm thick screed bed or bedding layer as in CM 1:6 all as specified

Demolition of stone slabs and tiles of any description of thickness in floors, aprons etc laid bedded and pointed in any mortar and rubbish off the primises (outside of MoD land) complete all as specified and directed.

M & L granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in wash hand basin platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with and including screed bed or bedding layer 15 mm thick, in CM 1:6 on stone masonry surfaces including making oval shape hole for fixing of wash hand basin etc complete .

M & L chamfer, splays or arris in facework to granite exc 15 mm but n exc 50 mm wide.

M&L Machine cut cudappah stone slab 20mm to 25 thick, over cement screed base laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete

S&F 15mm dia bore GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc including to taking up or down existing GI tubing complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S&F inrepair oval shaped vitreous china , under/over counter WHB, snow white, fancy type of overall size 560 x 470 mm, cat No S2030104 of cera or of equivalent make specified here-in-after including 32 mm CP waste coupling, PVC waste pipe etc complete all as specified and directed by Engr-in-Charge.

S & F inrepairs vitreous china wash down water closet pan ( pedesal pattern ), white including connection to drain ( or outgoing pipe ) and to flushing pipe with and including Plastic water closet seat,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F inrepairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S & F inrepairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F inrepairs 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed.

S & F inrepairs 15 mm stop valves, consealed long shank fancy type cast copper alloy chromium plated , screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F inrepairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia complete all as specified and directed.

S & F in repair flush pipe of polyethylene of low or high density or PVC , 32 mm dia for low level flushing cistern/ basins complete as fixed complete all as specified and directed.

S & F stainless steel gratings 75 / 100 mm dia with hole for waste pipe complete all as specified and directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws as fixed complete all as specified and directed.

S & F in repairs CP health faucet including flexible cord complete all as specified and directed.

S & F inrepairs CP toilet paper holder complete all as specified and directed.

S & F 75 mm dia PVC (SWR) multi floor trap including jointing with solvent cement complete all as specified and directed.

S & F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white including excluding push cock, flush pipe and waste pipe etc complete all as specified and directed.

S & F in repairs 15mm dia Concussive push button taps of Chromium plated cast copper alloy, screwed for iron pipe and fixed

S&F two track sliding partition with frame with two shutters witth 4 mm thick frosted glass , with good quality bearing, handle lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge. (a) Bottom frame 20620 (b) Top frame & Verrtical 20621 (c) Handle (side) 20606 (d) Shutter inter lock 20724 (e) Shutter top & Bottom 20844 (f) Glazing Clip 19352

M & L for preparation of old wooden surfaces of any description not otherwise discribed over 10 cm width of and applying one coat of synthetic enamel paint complete all as specified.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including two coats of oil bound distemper over primer on ceiling complete all as specified and directed.

M & L for decorative POP cornices/moulding of pattern as per approved by Engr-in-charge of cross section area exc 13 Sqcm and not exc 25 Sqcm complete all as specified and directed.

Taking down old unserviceable point wiring( light/fan/socket /power) complete, including fixtures and fittings such as switches, sockets, ceiling roses, pendants,regulators, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good the disturbed surfaces of walls, floors, ceiling etc.complete all as specified.

Taking down Main switches/DBs/MCB enclosure of any make and type including teakwood board, MCBs/MCCBs etc. complete and making good the disturbed surfaces including colour wash complete all as specified.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with Modular sunken boxes including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost

(a) One light point controlled by one switch complete all as specified and directed.

(b) One Fan point controlled by one switch complete all as specified and directed.

(c) One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

(d) One 3 pin 5 amps socket outlet point on same board complete all as specified.

S & F modular switch 6A SP one - way 230V white ivory finish complete all as specified

S & F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S&F ceiling rose surface type three terminals complete all as specified and directed.

M & L for Sub main wiring with 2 runs of single core 2.5sqmm PVC insulated unsheathed multistranded copper conductor 1100 volt grade down through in and including PVC casing and capping including all accessories on roof/ wall/ ceiling etc including one run of single core 2.5sqmm PVC insulated unsheathed multistranded copper conductor 1100 volt grade as earthing continuty conductor complete includung taking down old submain wiring all as specified and as directed Note :- Two runs of 2.5 sqmm conductor one run of 2.50 sqm earth conductor and one run of PVC casing and Capping will be measured as one RM.

S&F MCB SPN DB 4 way, double door, with 200 amp rated busbar 240 V, all as specified.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.

S & F for MCB double pole of rated capacity 32 amps, 240 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F in replacement of LED light fittings 1'x1', of capacity 18 watts environmental friendly, new genereation, aesthetically designed, ultra modern recess mounting luminaire white/ Warm white with high brightness SMD LEDs as light source 230 volts with all accessories internally pre wired and necessary mounting arrangements, complete all as specified. Make :- Make Bajaj Cat part No. BZRSQL 18W WH or its equivalent in other approved makes.

S&F in replacement of LED light fitting surface and wall mounted LED batten with Aluminium housing & integrated electronic driver complete in all respect of 10W cap. Cat Part No BCLSB 10 NW of make - Bajaj or equivalent in other approved makes.

Dismantling and taking down the existing old vintage /rusted out landsccape light/Post top lantern of any type and make including brackets clamps nuts and bolts, junction box etc., carefully from the poles/ground including removing electric connections etc complete all as specified.

Supply and fix LED Bollard of 9 W warm white in rectangular shaped victorian design with opal acrylic diffuser and better uniformity IP 65 protection and grouted in foundation suitable bolts, nuts and washer etc including electrical connection complete with suitable copper wire, from junction box to light fitting complete all as specified and as directed. Make:-Bajaj Cat Part No:- BGBOS 600 9W LED WW or equivalent make specified in list of make.

M&L PCC 1:3:6 Type C1 using 20 mm graded aggregate for foundation for LED bollard light fitting coping and mass concrete complete all as specified and as directed.

Supply and fix cable junction box of suitable size made out of thermoplastic sheet having IP 65 protection for out door installation fixed with 4 way bakelite cable terminals to be fixed inside the box including gland with fixed on PCC foundation with suitable clamps, nuts, bolts, washers etc. and including long bend PVC pipe foundation to fittings complete, all as directed. Make: Hensel/Spelsberg/ Rittal/Sintex.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying of pipe and getting out in soft/loose soil complete

Removing excavated meterial to a distance n.exc 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete

M/s Akshay Contruction

M/S - SUJIT ELECTRICALS