Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.1 LAccepted-AOC PO PS BUD BUD DISTT PURBA BURDWAN PIN 713403 | BUD BUD | PURBA BURDWAN | WEST BENGAL | 713403 | L1 | Accepted-AOC LOWEST RATE QUOTED | |
| 2 | L2₹19.7 L+₹61,474 (3.22%)Rejected-AOC | L2 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹21.3 L+₹2.3 L (11.8%)Rejected-AOC PO BUD BUD DIST BURDWAN WEST BENGAL PIN 713 403 | BUD BUD | BURDWAN | WEST BENGAL | 713403 | L3 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹21.5 L+₹2.4 L (12.5%)Rejected-AOC SAINIK SOCIETY HITKARINI DENTAL COLLEGE DUMNA ROAD JABALPUR MP 482001 | JABALPUR | JABALPUR | MP | 482001 | L4 | Rejected-AOC HIGHER RATE QUOTED THAN L1 | |
| 5 | L5₹23.5 L+₹4.4 L (23.0%)Rejected-AOC | L5 | Rejected-AOC HIGHER RATE QUOTED THAN L1 |
Tender Value
₹29.1 L
EMD Value
₹58,300
Closing Date
14 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
g
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_620279_1
8500-026/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹58,300
Yes
5 Dec 2023
23 Sept 2023
16 Oct 2023
23 Sept 2023
14 Oct 2023
7 Oct 2023
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing rubbish off the premises complete all as specified and directed.
M&L for Cement concrete 100 mm thick type B- 1, 1:2:4 (using 20 mm graded stone aggregate) laid on concrete floors and pavings; laid over cement concrete subfloors etc. and finished to an even and rough surface as specified and as directed by Engr-in-Charge.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating @ 150 GSM GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Pre-painted galvalume aluminum zinc coating @ 150 GSM GI based Plain steel as in ridges sheet 0.50mm thick 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.
S&F wind ties for roof including securing bolts, flat iron fillets (for securing weather boarding with screw bolts and nuts) includingall necessary drilling or riveting etc and similar work fonforming to Fe 410-O or Fe-310-O including painted with one soap coat of zinc chromate primer paint (including prepration of surfaces at contractor's workshop before fabrication) complete all as specified and directed.
S&F mild steel as in trusses, purlin, crane rail and joist, channel anlge or tee sections including all necessary cutting welding etc complete for forming to FE 410 W (Gde-E-250) quality A complete all as specified and directed.
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.
M&L for two coats synthetic enamel paint on old existing steel surfaces incl preparation of surfaces over 10 cm width or girth complete all as specified and directed.
M&L for sheet glass 3 mm thick ordinary quality and glazing with oil putty and pin in square n.exc 0.50 sqm in each pan complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per item No 12.00 above but 8mm dia complete all as specified & directed by Engr-in-Charge.
M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.
M&L for RCC 1:1.5:3 type A0 (using 12.5 mm graded stone aggregate) nominal mix in columns, pillars, piers, posts and struts etc all as specified and directed by the Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed
M&L for Non- skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer CM (1:6) complete all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge
M&L for Glazed ceramic tiles in vertical surface 450mmX350mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl. backing coating 10 mm thick in CM (1:3) all as specified as directed. Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge.
M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples including taking out old wire cloth complete all as specified and as directed by Engr-in-charge.
Taking down chowkhat or frame with shutters n.exc 1.50 Sqm (without taking of shutter from frame) each complete all as specified and directed
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy and fixed complete all as specified and directed..
Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including Aluminium snap beading for glazing/ paneling, all complete as per architectural drawings and the directions of Engr-in-Charge.
S&F powder coated Anodised aluminium window shutters, sliding type without sash bars, (minimum thickness of powder coating 50 micron) for three track shutters of windows & ventilators aluminium sections weighing 0.55 kg/m including necessary joining cleats , Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, anodised aluminium fittings suitaible etc all complete as per architectural drawings and the directions of Engr-in-charge.
M&L for 75 mm thick PCC 1:3:6 Type C1 as in plinth protections finishing even and smooth without using extra cement and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
S&F 100 mm size butt hinges extruded aluminium alloy with galavanised mild steel hing pin anodised and fixed type C-21 complete all as specified and directed.
S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed..
S&F aluminium handles, cast type, anodised 150 mm long complete all as specified and directed.
Taking down steel tubing having bore of pipe 15 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking down steel tubing having bore of pipe 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F Galvanised steel tubes, medium grade with bore of pipe in 15 mm with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S&F Galvanised steel tubes, medium grade with bore of pipe in 20 mm with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.
S&F health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook incl making connection and fixed in position complete all as specified and directed.
M&L for pre-polished machine pressed precast concrete interlocking paver block of any shape and size confoirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.
S&F in Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.
M& L for supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and as directed by Engr-in-charge.
M&L Extra for forming 40 cm inner girth fair finished drains or channels i.e. exc 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
S&F soap dish, vitreous china white, approximate size 160 x 160 x 90mm complete all as specified and directed.
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
S&F Vitreous china Squatting pan,'orissa pan' pattern, size 580mmx440 mm white, with integral foot rests(excluding flushing cistern and flush pipe) including provision of necessary cement concrete complete all as specified and directed.
S&F in repair vitreous china wash basin white, flat back, size 550X400 mm including cutting for pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.
S&F Vitreus China bowl urinal flat back Size of 465mm x 355mm x 265 mm white with grating and union for discharge pipe complete all as specified and directed.
S&F Urinal Spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed.
S&F in repairs 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge. Make : Hindware/Parryware/Cera
S&F in repair Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT or COLD' with long scrwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete complete all as specified and directed.
S&F in stop valve cast copper but fancy type chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and directed.
S&F 75 mm PVC (SWR) pipes double socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed by Engr-in-charge.
S&F 110mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints, fixed to wall with clamps and jointed complete all as specified and as directed by Engr-in-Charge.
S&F in repair 110mm bore PVC (SWR) bends any radiuswith access door complete all as specified and as directed by Engr-in-Charge.
S&F in repair 75mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed by Engr-in-Charge.
S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60 gms) complete all as specified and directed.
S&F in repair 32 mm bore Waste coupling of PTMT (half or full threaded) suitable for urinal (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4 )and finish smooth & even with using extra cement complete all as specified and directed
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
E/M PORTION Taking down carefully aluminium conductor point wiring (light, fan, socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators, sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed.
M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
M&L for point wiring for socket outlet 3 pin, 5 amps on Independent board controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes/ modular, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 63.00 above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket outlet 3 pin, 15 amps on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes/ modular , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.
S&F switch socket combination 2 in 1 multipurpose 5 pin, (6 Amps) flush type controlled by one switch complete all as specified and directed.
S&F socket outlets 2 in 1, 5/6 Amps, 230/240 V complete all as specified and as directed (For Same Board only)
S&F switch socket combination 2 in 1, 6 pin, (16 Amps) flush type controlled by one switch complete all as specified and directed.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.
S&F wall security light fittings 18 watts 230 volt, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65/66 including necessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete all as specified and directed. Make : Bajaj/Havells/Jaquar/CG
S&F Corvi Plus LED Bulkhead aluminium energy saving made up of aluminium housing with diffuser light fitting 1x10W bulkhead luminaires connecting up with three core flexible copper conductor cable of suitable complete all as specified and directed. Make : Bajaj/Havells/Jaquar/CG
S&F Arrow LED batten PC 1x10 watt 2' A tredy wall celling mounted slim LED batten with polycarbonate housing & poly carbonate diffuser with integrated LED driver with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as directed Make : Bajaj/Havells/Jaquar/CG
S&F Arrow LED batten PC 1x18 watt 4' A tredy wall celling mounted slim LED batten with polycarbonate housing & poly carbonate diffuser with integrated LED driver with complete all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete, complete all as directed Make : Bajaj/Havells/Jaquar/CG
S&F lamp holder, PVC/polycarbonate type with inverter type 12 watt lamp 4 hour back up and back plate straight or angular suitable for batten fittings complete all as specified and directed.
S&F exhaust ventilation fan with louvers of sweep 300mm, 230 Volts, with blade and frame and loures steel body complete all as directed by Engr-in-Charge. Make : Usha/CG/Bajaj
S&F sheet metal enclosure with 20 Amp Mcb and two pin and earth plug and socket complete with one single pole MCB all as specified By Engr-in-Charge. Make : ABB/Legrand/Hager/Schneider
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed. Make : Legrand/ABB/Schneider/Hager
S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning Make : ABB/Legrand/Hager/Schneider
S&F in repairs MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make : ABB/Legrand/Hager/Schneider
S&F XLPE armoured cable 10 sqmm 2 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and not exc. 1.5m depth and getting out in Soft/Loose soil complete all as specified and directed.
Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cmin soft/loose soil complete all as specified and as directed.
Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).
M&L for sub class B bricks locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cablecomplete all as specified and directed.
S&F GI Light grade 40 mm dia of size for road cross/cutting on wall floor drain etc complete all as specified and directed
S.P.S. SUPPLIERS
ROY ENTERPRISE
SINGH CONSTRUCTION
M/S GLOBE ENTERPRISE
rahul enterprise
M/s BISWAJIT GHOSH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .