GE 874/EWS-53/2020-21

Amount

B/R and E/M Portion

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed

RCC 1:2:4, Type B1 using 20mm graded crushed stone aggregate as in beams and lintels complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, bressumers, lintels, antilevers, shelves including supports, overhangs etc with rough finished surface complete all as specified and directed.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels up to 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing up to 60cm in height, copings, kneelers, apex stone, bed Block, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.

Plain Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and directed.

Brickworks with Sub Class 'B' bricks straight or curved on Plan half brick wall built in Cement mortar 1:4 complete all as specified and directed.

Mild steel works as in clamps, hold fasts and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified & directed.

Mild steel TMT bars 10mm dia and over, cut to length bent to shape required, binding with and including MS annealed wire of dia not less than 0.90 mm complete all as specified and as directed.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in strrups and binders with and including MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:4 on fair face of brickwork or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Sand filling under floor or in foundation watered and rammed to a true surfaces, complete, all as specified and as directed.

Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.

75mm thick, plain cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor etc. complete all as specified and directed.

50mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 300mm x 200mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in cement mortar 1:4, finished fair to received the tile, complete all as specified and directed.

Non skid coloured ceramic tiles 8mm thick square or rectangular, of size 300x 300x 7mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 15mm thick screed bed in Cement mortar 1:6 and 25mm PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone agg) complete all as specified and directed.

2nd hard wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Plain framed paneled shutters of 2nd class soft wood (kail) 35mm thick (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face and 2mm prelam PVC Sheet on back face complete all as specified and as directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

250mm long aluminium alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extrusted sections and fixing bolts and sliding bolts of extruded section of cast aluminium alloy all as specified.

Mild steel pressed handle 150mm, oval type stove enamelled, black.

Mild steel tower bolt stove enmelled black 150mm long black with bright bolt and fixed

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

3mm thick Figured glass Pin head type and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

6mm thick Plywood, 5 Nos of Ply grade BWR, type BB, fixed with nails to timber frame work as in ceiling complete all as specified and as directed.

20mm thick 2nd class soft wood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.

2nd class soft wood as in scantling, clean sawn fixed in position with nails in unframed work, complete all as specified and directed.

Plain fillets, rectangular or triangular in section clean sawn, secured with nails or brads 3sqcm & not exceeding 6sqcm, second class soft wood (Kail) complete, all as specified.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity complete all as specified and directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and as directed.

Bib tap with wall flange cast copper alloy with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet complete all as specified and directed.

Vitreous china bowl urinal of size 465X355X265mm white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws and pointing around urinal back in cement with bracket, flush pipe waste pipe grating and union for discharge pipe complete all as specified and directed.

Vitreous China squatting pan "Orissa Pattern" size 580 x 440mm white with integral foot rests complete (excluding flushing cistern ) including bed, pipe for flush connection to trap and to flush pipe and mking good to floor with provn of concrete bedding, complete all as specified and directed.

Vitreous china wash hand basin 550 x 450mm, white flat back including cast iron bracket, cutting for and pinning the ends of brackets or erecting on stand including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, complete all as specified and as directed.

Tubular towel rail, brass chromium plated, 20mm dia, D type, 45cm long between flanges, including pair of brackets, complete all as specified and directed.

PTMT Ball valve high pressure with polythene float and flynut complete screwed for iron pipe or for brass ferrule 20mm dia complte all as specified and directed.

PVC connection 15mm dia and 450mm long with PTMT nuts and washer, complete all as specified.

110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall or laid in floor complete all as specified.

75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall or laid in floor complete all as specified.

PVC (SWR) bends, 110mm bore, complete all as specified and as directed.

PVC (SWR) junction (single T) equal or unequal, 110mm bore, complete all as specified and as directed.

PVC (SWR) reducer 110mm x 75mm, complete all as specified and as directed.

PVC (SWR) Vent Cowl 75mm, complete all as specified and as directed.

PVC (SWR) P Trap 110mm, setting and jointing with solvent cement complete all as specified and as directed.

PVC (SWR) Floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified & directed.

Plain cement concrete bed (1:3:6) type C-2 using 40mm graded stone aggregate to drain pipes of 150mm bore including packing under hunching against the site of pipe after they are laid and tested.

Salt glazed stone ware (SGSW) drain pipes of grade 'A' 150mm bore laid in trenches and jointed on concrete bed complete all as specified and directed.

Septic tank for 50 users, Brick construction with top of slab at ground level including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exceeding 50 metres, vent pipe, supplying and fixing RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame vent shaft and sludge chamber etc., all as specified and shown in Drawing No CESZ-TD-01/2015 Sheet No.1/3 & 2/3 dt 22 Feb 2015 (revised dt 21.03.2015 ).

Construction of soakage well, excavation, in any type of soil, foundation in PCC 1:3:6 type C1, as in footing, wall of honey combed/ solid mansonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:4, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 m dia x 3m effective depth, all as specified and shown in Drg No. CESZ/TD- 01/2015 sh 3/3 dated 22/2/15 & revised on 06/06/15.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation new plastered surfaces of wall and applying two coats of oil emulsion distemper complete all as specified and as directed.

Applying two coats of colour wash over a coat of white washing including preparation of newly plastered surface of wall complete all as specified.

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC conduit and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box and inner and outer plate for mounting of Modular Switches including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 66 here-in-before but for one 6 pin socket outlet 15 Amp independent board using cable of size 2.5 Sqmm conduit all as specified and directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.

LED Batten 1x20 W for regal batten for LED Universal batten for G13 T with 18W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Eng-in-chrg. Make : Havells batten Cat part No LHFYBYG21N1W020 and LED Tube Road Cat part No LHLDCLXNUL818 or equivalent.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Switch Socket combination 2 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI Marked) complete all as specifed and directed.

LED bulb 9 Watts complete all as specified and directed. Make : havells/anchor

Supply and laying brick covering with width equal to length of bricks as mechanical protection to underground cable using old size sub class 'B' bricks, laid flat size 230mm x 115mm x 75 mm with width of brick perpendicular to length of cable, all as specified and as directed.

Sand cushioning to underground cables using new dry river sand laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete, punned to 18cm, complete all as specified and directed Note : Punned thickness of 18cms shall be measured for payment.

Exhaust fan plastic 380mm sweep 1400RPM, 240 volt with louvers, single phase including PVC flexible wire connecting to ceiling rose including making hole, groting nuts & bolts and plastering & making good the disturbed surface complete all as specified. Make : Havells model No. Turbo force SP or equivalent Make in Bajaj/CG, complete all as specified and directed.

Exhaust fan plastic 450mm sweep 1400RPM, 240 volt with louvers, single phase including PVC flexible wire connecting to ceiling rose including making hole, groting nuts & bolts and plastering & making good the disturbed surface complete all as specified. Make : Havells model No. Turbo force SP or equivalent Make in Bajaj/CG, complete all as specified and directed.

Storage water heater (Geyser), vertical type, of 25 ltr capacity of inner tank, outer tank, syphon assembly, thermostat heating element, safety valve etc complete all as per manufacturer design and specifications including making of all fixing arrangements complete having BEE Five Star Rating including grouting of nuts and bolts and necessary PCC work as specified and directed by Engineer-in-Charge. Make : Havells model Monza DX HSN code 8516 or equivalent as approved by Engr-in-charge.

House service bracket (hook type), complete, with 3m long GI pipe 40mm dia medium grade, two Nos 90 degree bend, MS hook and guy or stay, complete all as specified. Make: Havels/Anchor/Polycab/SSK.

MCB 'C' series, single pole and neutral 240 volts 40 Amps as incomer all as specified and as directed by Engr -in-Charge. Make: Havells /Legrand/MDS.

MCB 'C' series, single pole and neutral 240 volts 6 to 32 Amps all as specified and as directed by Engr -in-Charge. Make: Havells /Legrand/MDS.

MCB 'C' series, single pole 240 volts 6 to 32 Amps all as specified and as directed by Engr -in-Charge. Make: Havells/Legrand/MDS.

Sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 4 way with IP- 43 IK -09 protection Single door complete with approprite six bus bar of 200 Amp and neutral link, make lerand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and makeing good distributed wall surfaces to match with existing specification.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.

M/s Sajad Hussain Wani

MOHAMMAD HAMZA SOFI AND SONS

M/S BEE AAY CONSTRUCTIONS

M/S MANZOORAHMAD LONE

Bidder Name

MOHAMMAD HAMZA SOFI AND SONS

M/S MANZOORAHMAD LONE

M/s Sajad Hussain Wani

M/S SHAMAS PARWAIZ BHAT

M/S BEE AAY CONSTRUCTIONS