SPECIAL REPAIRS TO ROAD AT CERTAIN LOCATIONS AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

M&L for Repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and as directed.

M&L for Applying evenly a tack coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at a rate of application of 0. 7-1 kg/sqm on surface of WMMIVVBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface complete all as specified and as directed.

M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

M&L for Applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.2-0.3 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface complete all as specified and as directed.

M&L for premix bituninous Dense macadam with 4% paving bitumen by weight to total mix laid/rolled and compacted to required gradient and camper(Consolidated thickness 75mm or less) complete all as specified and as directed.

M & L for laying bituminous premixed semi dense asphaltic concrete, 30mm consolidated thickness with 5.5% binder content by weight of total mixed using paving bitumen (VG-30 grade), by hot mix process and laid by mechanical paver, rolled with 8 to 10 tonne capacity power roller and compacted to required camber and gradient complete all as specified and as directed.

S & F Solar cat eyes aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instruction etc complete all as specified and as directed.

M&L for preparing butuminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10 cm wide on roads pavemnets with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers' instructions complete all as specified and as directed.

M&L for preparing butuminous surfaces of road and marking 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like exc 10 cm wide on roads pavemnets with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers' instructions complete all as specified and as directed.

M&L for rubber speed breaker/rubber speed bumps of size 500x400x75mm, weight 32kgs/Rm, yellow and black colour, load bearing capacity 50Ton complete all as per manufacturers' instructions complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of Brick or Stone/boulder masonry built in cement mortar incl all quions, arches, pillars etc complete all as specified and as directed.

Reinforced concrete 450mm bore pipe class NP-3 laid and jointed complete with collars complete all as specified and as directed.

M&L for cement concrete type D2,1:4:8 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L Precast cement concrete block masonry with solid blocks, exc. 10 cm in widthin PCC 1:3:6, type C1 and setting in cement mortar 1:4, complete complete all as specified and as directed.

M&L plain Cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) for coping/bed blocks incl weathering slightly rounded or chamfered angles and throating and incl use and waste of form work complete all as specified and as directed.

M&L Rendering 15mm thick in cement mortar 1:4 on Stone masonry surface finished even and fair without using extra cement complete all as specified and as directed.

M&L preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L, 100mm thick PCC 1:2:4 type B-1 in flooring using 20mm graded stone aggregate finishing the surface even and smooth without using extra cement including necessary formwork complete all as specified and as directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified and as directed.

Surface dressing n exc 15 cm deep and getting out in soft /loose soil complete all as specified and as directed.

100mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregates as in sub bases of floors and pavings complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation etc spread, levelled and rammed including watering complete all as specified and as directed.

M&L machine pressed precast concrete inter locking paver block with grey cement and pigment (Reflective type)in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.