STATCOM Package - ST-01T

Attachment-3 (QR)

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)”.

SPECIFICATION No. : CC/T/W-STAT/DOM/A06/24/14931

(Qualifying Requirement Data)

Bidders’s Name & Address: Contract Services

Name: Power Grid Corporation of India Ltd.,

Address: "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

In support of the Qualification Requirements (QR) for bidders, stipulated in Annexure-A (BDS) of the Section - III (BDS), Volume-I & Additional Information required as per ITB clause 9.3(c) of the Bidding Documents, we furnish herewith our QR data/details along with other information, as follows herewith our stipulations have been reproduced in italics for ready reference, however, in case of any discrepancy the QR as given in BDS shall prevail).

* We have submitted bid as individual firm.

* We have submitted bid as joint venture of following firms :

(* Strike-off whichever is not applicable)

[For details regarding Qualification Requirements of a Joint Venture, please refer para 4.0 below.]

We are furnishing the following details/document in support of Qualifying requirement for the subject package.

A Attached copies of original documents defining :

a) The constitution or legal status;

b) The principal place of business;

c) The place of incorporation (for bidders who are corporations); or the place of registration and the nationality of the Owners (for applicants who are partnerships or individually-owned firms).

B Attached original & copies of the following documents :

a) Written power of attorney of the signatory of the Bid to commit the bidder.

b) Joint Venture Agreement.

GENERAL INFORMATION

Bidder is required to provide general information as per the following format.

[Where the Bidder proposes to use named subcontractor(s) for critical components of the works or for work contents in excess of ten (10) percent of the bid price, the following information should also be supplied for the subcontractor(s)].

S No. Particulars Bidder/Lead Partner In case of Joint Venture

For Other Partner(s) For Other Partner(s)

1 Name of the Firm

2 Head Office/ Registered Office Address

5 Contact Person

6 Place of Incorporation/ Registration

7 Year of Incorporation/ Registration

8 Nationality of

1.0 TECHNICAL REQUIREMENTS {Reference para 1 of Annexure-A (BDS)}

1 TECHNICAL EXPERIENCE

Route-1 1.1 a).i)The bidder must have executed a STATCOM Project, in the network of power utility, controlling 132kV or above system voltage (as point of common coupling) having at least ±50 MVAR rating for STATCOM portion@, as a Prime Contractor*, wherein the scope involves engineering, supply, erection, testing and commissioning of the STATCOM, and the above project must be in #satisfactory operation for at least 2 (two) years as on the Originally scheduled last date of bid submission (soft copy) i.e. 21/11/2024. OR 1.1 a) ii) The bidder must have executed a STATCOM Project, in the network of power utility, controlling 132kV or above system voltage (as point of common coupling) in India having at least ±50 MVAR rating for STATCOM portion@, as a Prime Contractor*, wherein the scope involves engineering, supply, erection, testing and commissioning of the STATCOM, and the above project must be in #satisfactory operation for at least 1 (one) years as on the Originally scheduled last date of bid submission (soft copy) i.e. 21/11/2024. In case a bidder qualifies through route 1.1 a ii) above they shall submit a confirmation letter along with the bid stating that they shall provide an additional defect liability for 1 year over and above the warranty period as specified in the bidding documents. 1.1 b) The bidder must have designed, manufactured, tested and supplied at least STATCOM Valve(s) & its associated Control for a STATCOM Project of 345kV or above system voltage (as point of common coupling) having at least ±100 MVAR rating for STATCOM portion@, in the network of power utility, and the above project must be in #satisfactory operation as on the date of bid submission mentioned above.

2.1.1 In case the Bidder is a Foreign Entity, following requirements shall be complied:

Route-2 1.2 The bidder must have established manufacturing/assembling and testing facilities in India for STATCOM Valve(s), based on the technological support of the Collaborator(s)/ Parent/Principal/group company and the bidder must have manufactured, tested & supplied: a) at least one (1) no STATCOM Valve(s) for 345KV or above voltage level STATCOM Project. Or Voltage Source Convertor(VSC) based HVDC Valves for atleast one (1) no of HVDC terminal station of 320kV or above voltage level. b) The Collaborator(s)/Parent/Principal/group company of the bidder must meet qualification requirements mentioned at Route-1 above. c) The bidder shall also submit the following along with the bid: i. A legally enforceable undertaking (jointly with the Collaborator(s)/Parent/Principal/group company) to guarantee quality, timely supply, commissioning, performance and warranty obligations as specified for the equipment(s); ii A valid collaboration agreement for technology transfer/license to design, manufacture, test and supply STATCOM in India

Route-3 1.3 In case Bidder is not a STATCOM Valve Manufacturer, he shall also be considered provided: a) The Bidder must have executed erection, testing and commissioning of at least one (1) project of SVC/STATCOM/ HVDC at 320 kV or above voltage level in network of power utility in India during the last seven (7) years as an Associate $$ and the same must be in #satisfactory operation as on the date of bid submission mentioned above. b) The STATCOM valves and associated control & protection must be offered from Indian Manufacturers, who meets the requirement mentioned at Route 1 or Route -2 above. c) A legally enforceable undertaking (jointly with the STATCOM Valve Manufacturer) (as per enclosed format in Sample forms (Sec-VI) of bidding document) to guarantee basic design, quality, timely supply, performance and warranty obligations as specified for the equipment(s) is submitted along with the bid stating that STATCOM Valve Manufacturer shall furnish performance guarantee for an amount of two (2) % of the total contract price. This performance guarantee shall be in addition to the Contract Performance security to be submitted by the Bidder.

Note-1 (*): In case of works executed under a contract that had been awarded on a Joint Venture, the experience of individual Joint Venture Partner shall be considered limited to the scope of that partner under the said contract. Note-2 (#): satisfactory operation means Certificate issued by the employer certifying the operation without any adverse remark. Note-3 (@): Rating of STATCOM Portion (connected to a common coupling transformer) is excluding fixed, mechanical switched or power-device switched inductors and capacitors. Further, in the rating, ‘-‘indicates inductive and ‘+’ indicates capacitive reactive power continuous capacities. Note-4 (^): AIS means Air Insulated Switchgear. GIS means Gas Insulated Switchgear. Note-5 ($$) Associate means a party who has been conjoined by the Contractor to independently execute a pre-selected part of facilities of the contract and grant him the associated contractual rights and obligations, without diluting the overall responsibility of the contractor in respect of the Facilities under the contract Note-6 : In case, Bidder is a holding company, the technical experience referred to in Clause 1 above shall be of that holding company only (i.e. excluding its subsidiary/group companies). In case Bidder is a subsidiary of a holding company, the technical experience referred to in Clause 1 above shall be of that subsidiary company only (i.e. excluding its holding company). Note-7 Parent/principal Company shall be the company who have maintained an equity participation of at least 51% in the bidders company Seven (7) days prior to originally scheduled last date of bid submission above Note- 8 The Group company means the Contractor and the Group Company shall have a common source of control, directly or indirectly, so as to exercise a minimum equity participation of 26% or appoint more then 50% of members of Board of Directors in the Group Company Seven (7) days prior to originally scheduled last date of bid submission mentioned above

Using the following format, each Bidder (individual firms or partners of a joint venture) is requested to list the experience as detailed above, on the basis of which the Bidder wishes to qualify. The information is to be summarised using following format for each experience of the Bidder or of each Partner of a Joint Venture.

(The bidder shall attach documentary evidence, such as copies of utility certificates for completed contracts and copies of award letters etc. for ongoing contracts in support of his experience as listed in the following proforma for each Contract with the help of "Attach" Buttons provided in table given below).

Format-A.1: Route-1

Format for the Bidder/Collaborator/ Parent/Principal//Group Company/Partner of JV in case of Joint Venture/Indian GIS Mnaufacturer in support of meeting the requirement of para 1.1. (a) (i), Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Name of the Bidder: [Single Firm / Lead Partner of a JV] #REF!

Name & Address of Bidder/Collaborator/Parent/Principal Company/Group Comany (if applicable) #REF!

I Whether the Bidder [Collaborator/Parent/Principal (if applicable)] have executed a STATCOM Project. If Yes, provide the following details: (Yes / No) (Tick only whichever is applicable) (Yes / No) (Tick only whichever is applicable)

1 Name of Contract Undertaken #REF!

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm/Partner of a JV

4(a)(i) Whether the said Contract under reference was in the network of power utility, controlling 132kV or above system voltage (as point of common coupling), having at least ± 50 MVAR (‘-‘ indicates inductive and ‘+’ indicates capacitive capacities) rating for STATCOM portion@. @ Rating of STATCOM Portion (connected to a common coupling transformer) is excluding fixed, mechanical switched or power-device switched inductors and capacitors. □ Yes / □ No If Yes, give the details a. Voltage Level of System ………...... kV b. Rating of STATCOM: ……. MVAR □ Yes / □ No If Yes, give the details a. Voltage Level of System ………...... kV b. Rating of STATCOM: ……. MVAR

4(a)(ii) Whether the said Contract under reference was executed as □ Sole Contractor (Prime Contractor) OR □ Partner of a Joint Venture (Tick only whichever is applicable) □ Sole Contractor (Prime Contractor) OR □ Partner of a Joint Venture (Tick only whichever is applicable)

4(a)(iii) Scope of the Work executed in the Contract under reference □ Engineering □ Supply □ Erection □ Testing & □ Commissioning of STATCOM (Tick only whichever is/are applicable) Note: In case of works executed under a contract that had been awarded on a Joint Venture, the experience of individual Joint Venture Partner shall be considered limited to the scope of that partner under the contract. □ Engineering □ Supply □ Erection □ Testing & □ Commissioning of STATCOM (Tick only whichever is/are applicable) Note: In case of works executed under a contract that had been awarded on a Joint Venture, the experience of individual Joint Venture Partner shall be considered limited to the scope of that partner under the contract.

4(a)(iv) Whether for the Project under reference is in satisfactory operation for at least 2 (two) years as on the Originally scheduled last date of bid submission (soft copy) as above □ Yes / □ No If Yes, give the details a. In operation since ……….. (dd/mm/yy) b. In Operation for ………… years. □ Yes / □ No If Yes, give the details a. In operation since ……….. (dd/mm/yy) b. In Operation for ………… years.

Scope of work involved under the Contract

(Tick whichever is/are applicable)

NOTE: type test reports of Collaborator/ Parent Company/ Subsidiary Company/ Group Company shall also be acceptable, for which a confirmation shall be furnished along with the bid as per format attached in the bidding documents (Attachment-24 in Volume-III)

of Gas Insulated Switchgear (GIS) circuit breaker bays. of Gas Insulated Switchgear (GIS) circuit breaker bays.

In case of foreign entity, whether bidder have established/ commence the establishment of facility as Indian Subsidiary/ Group Company/ Joint Venture Company for manufacturing & testing of 765kV or above voltage level GIS in India (as per Companies Act 1956 or 2013 of India)

Whether bidder want to propose its above subsidiary/ Group Company/ Joint Venture Company as its associate for executing On-Shore Supply Contract

Foreign Bidder can offer to supply more than one 765kV GIS circuit breaker bay* from India provided his Subsidiary or Group Company or a Joint Venture Company (JVC) must have manufactured at least one (1) number 765kV or above voltage level GIS Circuit Breaker bay* and this bay either should have been supplied or should have been type tested ( as per IEC or equivalent standard) as on the originally scheduled date of bid opening as mentioned above

Whether Undertaking (as per enclosed format in Section-VI, Sample Forms and Procedures of bidding document) for above is enclosed with the bid

Details of documents uploaded in support of the above stated experience

Format for the Indian Associate executing the On-Shore Supply and On-Shore Services Contract for a Foreign Entity submitting its bid as an Individual Firm or in a Joint Venture without any Indian Entity as a Partner, in support of meeting the requirement of para 1.1.1(i) of Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Name of the Indian Associate executing the On-Shore Supply and On-Shore Services Contract

1 Name of Contract Undertaken

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the Bidder

4 No. of GIS/AIS Circuit Breaker equipped bays under the contract

(Indicate nos. of Circuit Breaker equipped bays of 220 kV or above voltage level where one no. of circuit breaker bay shall be considered as a bay used for controlling a line or a transformer or a reactor or a bus section or a bus coupler and comprising of at least one circuit breaker, one disconnector and three nos. of single phase CTs / Bushing CTs)

Format-A.2: Route-1

Format for the Bidder/Collaborator/ Parent/Principal/Group Company/Partner of JV in case of Joint Venture/Indian GIS Mnaufacturer in support of meeting the requirement of para 1.1. (a) (ii), Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Name of the Bidder: [Single Firm / Lead Partner of a JV] #REF!

Name & Address of Bidder/Collaborator/Parent/Principal Company/Group Comany (if applicable) #REF!

I Whether the Bidder [Collaborator/Parent/Principal (if applicable)] have executed a STATCOM Project. If Yes, provide the following details: (Yes / No) (Tick only whichever is applicable) (Yes / No) (Tick only whichever is applicable) #REF!

1 Name of Contract Undertaken #REF!

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm/Partner of a JV

4(a)(i) Whether the said Contract under reference was in the network of power utility, controlling 132kV or above system voltage (as point of common coupling), in India having at least ± 50 MVAR (‘-‘ indicates inductive and ‘+’ indicates capacitive capacities) rating for STATCOM portion@. @ Rating of STATCOM Portion (connected to a common coupling transformer) is excluding fixed, mechanical switched or power-device switched inductors and capacitors. □ Yes / □ No If Yes, give the details a. Voltage Level of System ………...... kV b. Rating of STATCOM: ……. MVAR □ Yes / □ No If Yes, give the details a. Voltage Level of System ………...... kV b. Rating of STATCOM: ……. MVAR

4(a)(ii) Whether the said Contract under reference was executed as □ Sole Contractor (Prime Contractor) OR □ Partner of a Joint Venture (Tick only whichever is applicable) □ Sole Contractor (Prime Contractor) OR □ Partner of a Joint Venture (Tick only whichever is applicable)

4(a)(iii) Scope of the Work executed in the Contract under reference □ Engineering □ Supply □ Erection □ Testing & □ Commissioning of STATCOM (Tick only whichever is/are applicable) Note: In case of works executed under a contract that had been awarded on a Joint Venture, the experience of individual Joint Venture Partner shall be considered limited to the scope of that partner under the contract. □ Engineering □ Supply □ Erection □ Testing & □ Commissioning of STATCOM (Tick only whichever is/are applicable) Note: In case of works executed under a contract that had been awarded on a Joint Venture, the experience of individual Joint Venture Partner shall be considered limited to the scope of that partner under the contract.

4(a)(iv) Whether for the Project under reference is in satisfactory operation for at least 1 (one) years as on the Originally scheduled last date of bid submission (soft copy) as above □ Yes / □ No If Yes, give the details a. In operation since ……….. (dd/mm/yy) b. In Operation for ………… years. □ Yes / □ No If Yes, give the details a. In operation since ……….. (dd/mm/yy) b. In Operation for ………… years.

Scope of work involved under the Contract

(Tick whichever is/are applicable)

NOTE: type test reports of Collaborator/ Parent Company/ Subsidiary Company/ Group Company shall also be acceptable, for which a confirmation shall be furnished along with the bid as per format attached in the bidding documents (Attachment-24 in Volume-III)

of Gas Insulated Switchgear (GIS) circuit breaker bays. of Gas Insulated Switchgear (GIS) circuit breaker bays.

In case of foreign entity, whether bidder have established/ commence the establishment of facility as Indian Subsidiary/ Group Company/ Joint Venture Company for manufacturing & testing of 765kV or above voltage level GIS in India (as per Companies Act 1956 or 2013 of India)

Whether bidder want to propose its above subsidiary/ Group Company/ Joint Venture Company as its associate for executing On-Shore Supply Contract

Foreign Bidder can offer to supply more than one 765kV GIS circuit breaker bay* from India provided his Subsidiary or Group Company or a Joint Venture Company (JVC) must have manufactured at least one (1) number 765kV or above voltage level GIS Circuit Breaker bay* and this bay either should have been supplied or should have been type tested ( as per IEC or equivalent standard) as on the originally scheduled date of bid opening as mentioned above

Whether Undertaking (as per enclosed format in Section-VI, Sample Forms and Procedures of bidding document) for above is enclosed with the bid

Confirmation letter from the bidder along with the bid stating that they shall provide an additional defect liability for 1 year over and above the warranty period as specified in the bidding documents. (Applicable for the Bidder qualify through Route-1.1 (a) (ii) of Annexure-A(BDS)) (Yes / No) (Tick only whichever is applicable) (Yes / No) (Tick only whichever is applicable)

Details of documents uploaded in support of the above stated experience

Format-A.3: Route-1

Format for the Bidder/Collaborator/ Parent/Principal/Group Company/Partner of JV in case of Joint Venture/Indian GIS Mnaufacturer in support of meeting the requirement of para 1.1. (b), Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Name of the Bidder: [Single Firm / Lead Partner of a JV] #REF!

Name & Address of Bidder/Collaborator/Parent/Principal Company/Group Comany (if applicable) #REF!

I Whether the Bidder [Collaborator/Parent/Principal/Group Comapny (if applicable)] have supplied STATCOM Valve(s) & its associated Control for a STATCOM Project. If Yes, provide the following details: (Yes / No) (Tick only whichever is applicable) (Yes / No) (Tick only whichever is applicable)

1 Name of Contract Undertaken #REF!

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm/Partner of a JV

4(a)(i) Whether the said Contract under reference was in the network of power utility, controlling 345kV or above system voltage (as point of common coupling), having at least ± 100 MVAR (‘-‘ indicates inductive and ‘+’ indicates capacitive capacities) rating for STATCOM portion@. @ Rating of STATCOM Portion (connected to a common coupling transformer) is excluding fixed, mechanical switched or power-device switched inductors and capacitors. □ Yes / □ No If Yes, give the details a. Voltage Level of System ………...... kV b. Rating of STATCOM: ……. MVAR □ Yes / □ No If Yes, give the details a. Voltage Level of System ………...... kV b. Rating of STATCOM: ……. MVAR

4(a)(ii) Whether the said Contract under reference was executed as □ Sole Contractor (Prime Contractor) OR □ Partner of a Joint Venture (Tick only whichever is applicable) □ Sole Contractor (Prime Contractor) OR □ Partner of a Joint Venture (Tick only whichever is applicable)

4(a)(iii) Scope of the Work executed in the Contract under reference □ Design □ Manufacture □ Testing □ Supply of STATCOM (Tick only whichever is/are applicable) . □ Design □ Manufacture □ Testing □ Supply of STATCOM (Tick only whichever is/are applicable) .

4(a)(iv) Whether for the Project under reference is in satisfactory operation as on the Originally scheduled last date of bid submission (soft copy) as above □ Yes / □ No If Yes, give the details a. In operation since ……….. (dd/mm/yy) b. In Operation for ………… years. □ Yes / □ No If Yes, give the details a. In operation since ……….. (dd/mm/yy) b. In Operation for ………… years.

Scope of work involved under the Contract

(Tick whichever is/are applicable)

NOTE: type test reports of Collaborator/ Parent Company/ Subsidiary Company/ Group Company shall also be acceptable, for which a confirmation shall be furnished along with the bid as per format attached in the bidding documents (Attachment-24 in Volume-III)

of Gas Insulated Switchgear (GIS) circuit breaker bays. of Gas Insulated Switchgear (GIS) circuit breaker bays.

In case of foreign entity, whether bidder have established/ commence the establishment of facility as Indian Subsidiary/ Group Company/ Joint Venture Company for manufacturing & testing of 765kV or above voltage level GIS in India (as per Companies Act 1956 or 2013 of India)

Whether bidder want to propose its above subsidiary/ Group Company/ Joint Venture Company as its associate for executing On-Shore Supply Contract

Foreign Bidder can offer to supply more than one 765kV GIS circuit breaker bay* from India provided his Subsidiary or Group Company or a Joint Venture Company (JVC) must have manufactured at least one (1) number 765kV or above voltage level GIS Circuit Breaker bay* and this bay either should have been supplied or should have been type tested ( as per IEC or equivalent standard) as on the originally scheduled date of bid opening as mentioned above

Whether Undertaking (as per enclosed format in Section-VI, Sample Forms and Procedures of bidding document) for above is enclosed with the bid

Details of documents uploaded in support of the above stated experience

Format-B: Route-2

Format in support of meeting the requirement of para 1.2 Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Name of the Bidder: [Single Firm / Lead Partner of a JV] #REF!

Whether the Bidder have established manufacturing/assembling and testing facilities in India for STATCOM Valve(s) on the technological support of the Collaborator(s)/Parent/Principal/Group Company (Yes / No) (Tick only whichever is applicable) #REF!

Name of Collaborator(s)/Parent/Principal/Group Company (Yes / No) (Tick only whichever is applicable) (Yes / No) (Tick only whichever is applicable)

1 Name of Contract Undertaken #REF!

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm/Partner of a JV

4(a)(i) Whether the Bidder for the Contract under reference have manufactured, tested & supplied a) at least one (1) no STATCOM Valve(s) for 345KV or above voltage level STATCOM Project. Or Voltage Source Convertor(VSC) based HVDC Valves for atleast one (1) no of HVDC terminal station of 320kV or above voltage level. □ Yes / □ No If Yes, give the details a. Voltage Level of System ……. kV b. No. of STATCOM Valves:……. Nos. c. Date of Supply:……………. d. Date of Operation: …………….. Or □ Yes / □ No If Yes, give the details a. Voltage Level of System ……. kV b. No. of Voltage Source Convertor(VSC) based HVDC Valves for HVDC terminal station:……. Nos. c. Date of Supply:……………. d. Date of Operation: …………….. □ Yes / □ No If Yes, give the details a. Voltage Level of System ……. kV b. No. of STATCOM Valves:……. Nos. c. Date of Supply:……………. d. Date of Operation: …………….. Or □ Yes / □ No If Yes, give the details a. Voltage Level of System ……. kV b. No. of Voltage Source Convertor(VSC) based HVDC Valves for HVDC terminal station:……. Nos. c. Date of Supply:……………. d. Date of Operation: ……………..

4(a)(ii) Details of documentary evidence submitted in support of stated experience / Contract

4(a)(iii) Whether Collaborator(s)/Parent/Principal/Group Comapny of the bidder meets qualification requirements mentioned at at Route-1 above and details of which is mentioned at Table-A above. □ Yes / □ No □ Yes / □ No

4(a)(iv) Whether legally enforceable undertaking (jointly with the Collaborator(s)/Parent/Principal/Group Company) to guarantee quality, timely supply, commissioning, performance and warranty obligations as specified for the equipment(s), furnished alongwith the bid. □ Yes / □ No □ Yes / □ No

Scope of work involved under the Contract

(Tick whichever is/are applicable)

NOTE: type test reports of Collaborator/ Parent Company/ Subsidiary Company/ Group Company shall also be acceptable, for which a confirmation shall be furnished along with the bid as per format attached in the bidding documents (Attachment-24 in Volume-III)

of Gas Insulated Switchgear (GIS) circuit breaker bays. of Gas Insulated Switchgear (GIS) circuit breaker bays.

In case of foreign entity, whether bidder have established/ commence the establishment of facility as Indian Subsidiary/ Group Company/ Joint Venture Company for manufacturing & testing of 765kV or above voltage level GIS in India (as per Companies Act 1956 or 2013 of India)

Whether bidder want to propose its above subsidiary/ Group Company/ Joint Venture Company as its associate for executing On-Shore Supply Contract

Foreign Bidder can offer to supply more than one 765kV GIS circuit breaker bay* from India provided his Subsidiary or Group Company or a Joint Venture Company (JVC) must have manufactured at least one (1) number 765kV or above voltage level GIS Circuit Breaker bay* and this bay either should have been supplied or should have been type tested ( as per IEC or equivalent standard) as on the originally scheduled date of bid opening as mentioned above

Whether Undertaking (as per enclosed format in Section-VI, Sample Forms and Procedures of bidding document) for above is enclosed with the bid

4(a)(v) Whether valid collaboration agreement for technology transfer/license to design, manufacture, test and supply STATCOM in India, is furnished alongwith the bid. □ Yes / □ No □ Yes / □ No

Format-C: Route-3

Format in support of meeting the requirement of para 1.3 Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Name of the Bidder: [Single Firm / Lead Partner of a JV] #REF!

1 Name of Contract Undertaken #REF!

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm/Partner of a JV

4(a)(i) Whether the Bidder have executed erection, testing and commissioning of at least one (1) project of SVC/STATCOM/ HVDC at 320 kV or above voltage level in network of power utility in India during the last seven (7) years as an Associate $$ and the same must be in #satisfactory operation as on the date of bid submission mentioned above. □ Yes / □ No If Yes, give the details a. Voltage Level of System ……. kV b. Name of project SVC/STATCOM/HVDC: ....................... □ Yes / □ No If Yes, give the details a. Voltage Level of System ……. kV b. Name of project SVC/STATCOM/HVDC: .......................

4(a)(ii) Details of documentary evidence submitted in support of stated experience / Contract

Name of the Proposed Indian Manufacturer for STATCOM valves and associated control & protection (as per the Route-3 of Annexure-A(BDS)

Whether the above Indian STATCOM valves and associated control & protection Manufacturer meets the requirement mentioned at Route-1 or Route-2 above. (If Yes, Please mentioned the details in the Format-A/Format-B above) □ Yes / □ No □ Yes / □ No

Whether Undertaking (Jointly with theSTATCOM valves and associated control & protection Manufacturer) (as per enclosed format in Section-VI, Vol-I of bidding document) for above is enclosed with the bid. □ Yes / □ No □ Yes / □ No

2.0 FINANCIAL REQUIREMENTS :

Financial Position {Reference para 2.0 of Annexure-A (BDS)} For the purpose of this particular bid, bidders shall meet the following minimum criteria:

a) Net Worth for last 3 financial years should be positive

b) Minimum Average Annual Turnover** (MAAT) of the bidder for the best three years i.e. 36 months out of last five financial years as annualized should be Rs. 4470.81 million or Equivalent

**Note: Annual Gross Revenue from operations/ Gross Operating Income as incorporated in the profit & loss account excluding Other Operative Income/Other Income.

For Bidders to qualify for more than one package, their financial position shall not be less than the sum of the requirement for the packages they propose to qualify for ( strike through if only one package)

c) Bidder shall have liquid assets (L.A.) and/or evidence of access to or availability of credit facilities of not less than Rs. 745.13 million or Equivalent

Note: (i) In case bidder is a holding company, the Financial Position criteria referred to in para 2 above shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, the Financial Position criteria referred to in para 2 above shall be that of subsidiary company only (i.e. excluding its holding company). (ii) In case bidder has established manufacturing/assembling facility in India and yet to complete three (3) financial years, the Net Worth and average of the turnover as per financial statement for completed financial years shall be considered for the purpose of compliance to the specified Net Worth and MAAT requirements. (iii) In case of bidder qualifying through Para 2 above, who has established manufacturing/assembling & testing facility in India as Subsidiary/JVC/Group company by its parent/principal but not meeting the Financial Position requirement as per note (i) read along with note (ii) above, the following shall be applicable: In case bidder is yet to complete five (5) years from the date of commercial production of such equipment(s) as on the date of bid Submission mentioned above, the financial position requirement as per para 2 (b) & (c) of parent/principal company providing collaboration for technological support shall be considered. However, once he completes five (5) years from the date of commercial production of such equipment (s) in India as on the date of bid Submission mentioned above, the financial position requirements as specified at 2 (b) and (c) above shall also be required to be met by such bidder on their own as per note (i) above and not based on their parent/principal company. Further, in case the bidder is yet to complete one (1) financial year, the Net worth requirement as per para 2 (a) above of parent/principal shall be considered. (iv) Relaxation for Start-Ups^^/ MSEs Start-Ups^^/ MSEs, meeting the specified requirements at Para 2 (a) above in Financial Position shall also be considered qualified if they meet Eighty (80) % of the requirement specified at Para 2 (b) & 2 (c) above in Financial Position. ^^ Start-Ups as defined by DIPP, applicable as on the Originally scheduled last date of bid submission (soft copy)

{In support of its ‘Financial Position’, in line with the above, the Bidder (in case of bidding by single firm ) or each of the Partners of a Joint Venture (in case of bidding by a Joint Venture) or Company/Constituents must provide the relevant information in support of the same, along with documentary evidence, in the following format}

2.1 Financial Qualification Data: 2 or more

Name of the Bidder

Details of documentary evidence submitted in support of Qualification Data

Networth (in Rs. Millions)

Sl No Financial year

Do you have audited results for FY 2020-21 No

B Turnover details:

Details of documentary evidence submitted in support of Qualification Data

Turnover (in Rs. Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

Do you have audited results for FY 2020-21

Average Annual Turnover for best Three Years is

C Liquid Assets

LA (in Rs. Million)

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

Name of Other Partner-1 of JV

Details of documentary evidence submitted in support of Qualification Data

Networth (in Rs. Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

Do you have audited results for FY 2020-21

B Turnover details:

Details of documentary evidence submitted in support of Qualification Data

Turnover (in Rs. Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

Do you have audited results for FY 2020-21

C Liquid Assets

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

Name of Other Partner-2 of JV

Details of documentary evidence submitted in support of Qualification Data

Networth (in Rs. Millions)

Sl No Financial year

Do you have audited results for FY 2016-17 Yes

Do you have audited results for FY 2020-21

B Turnover details:

Details of documentary evidence submitted in support of Qualification Data

Turnover (in Millions)

Sl No Financial year

Do you have audited results for FY 2020-21

Average Annual Turnover for best Three Years is

C Liquid Assets

LA (in Rs. Million)

Details of evidence of having Liquid assets (LA)

Details of evidence of access to or availability of credit facilities

3.0 Joint Venture (JV) Firms {Reference para 3.0 of Annexure-A (BDS)}

3.1 In case a bid is submitted by a Joint Venture (JV) of two or more firms as partners, Joint Venture must meet the following requirements: a) One of the partners of the JV shall meet the Technical Experience criteria stipulated at Route 1 or Route-2 mentioned above. b) Each of the other partner(s) of the JV must have i) manufactured and supplied at least one 345kV or above voltage class Equipment such as Circuit breaker/Isolator/Instrument transformer/Power Transformer/Reactor /Power Capacitor/Control & Protection Systems which should be in #satisfactory operation as on the date of bid submission mentioned above. OR ii) erected, tested and commissioned at least one (1) substation having minimum four (4) nos. AIS^/GIS^ Circuit Breaker equipped bays of 345kV or above voltage level during the last seven (7) years and these bays must be in #satisfactory operation as on the date of bid Submission as mentioned above. OR iii) erected, tested and commissioned at least one (1) project of SVC/ FSC/STATCOM/ HVDC at 320kV or above voltage level in India during the last seven (7) years and the same must be in #satisfactory operation as on the date of bid Submission mentioned above c) All the partners of the JV shall meet individually the Financial Position criteria given at para 2 (a) above. d) The lead partner shall meet, not less than 40% of the Financial Position minimum criteria given at para 2 (b) & (c) above. e) Each of the other partner(s) individually shall meet not less than 25% of the Financial Position minimum criteria given at para 2 (b) & (c) above. f) All the partners of Joint Venture shall meet collectively the requirement of para 2 (b) & (c) above. g) The figure of average annual turnover and liquid assets/credit facilities for each of the partners of the JV shall be added together to determine the JV’s compliance with the minimum qualifying criteria set out in Para 2 (b) & (c) above.

In case of Joint venture, the following conditions shall also apply:

(a) the bid, and in case of successful bid, the specified Form of Agreement shall be signed so as to be legally binding on all partners (as per enclosed format in Section-VI, Vol.-I of bidding document).

(b) one of the partners shall be nominated as Lead Partner, and the Lead Partner shall be authorized to incur liabilities and receive instructions for and on behalf of any and all partners of the Joint Venture, and the entire execution of the Contract shall be done with the Lead Partner and payment under the contract shall be received by the Lead Partner on behalf of the Joint Venture as per power conferred to him in the Power of Attorney. The authorization shall be evidenced by submitting a Power of Attorney signed by legally authorized signatory of all the partners as per Performa in in Section-VI, Vol.-I of bidding documents. The payment under the Contract can also be received by other partner(s) based on authorization of Lead Partner.

(c) All partners of the joint venture shall be liable jointly and severally for the execution of the Contract in accordance with the Contract terms and a statement to this effect shall be included in the authorisation mentioned under (b) above as well as in the Bid Form and in the Contract Form (in case of a successful bid);

(d) Agreement entered into by the Joint Venture partners shall be submitted with the bid.

4 The bidder shall furnish documentary evidence in support of the qualifying requirement stipulated as above

4.1 In accordance with the above, in case of JV bidders, it should be ensured that necessary details including those pertaining to each JV partner are furnished and the documents are submitted alongwith the bid. Further, the JV bidders should also ensure that other requirements are complied with. The lists of documents furnished are to be indicated below :

A For Name of the Bidder

B For Name of Other Partner-1 of JV

C For Name of Other Partner-2 of JV

Format in support of meeting the requirement of para 3.1 (b)(ii) of Annexure-A to BDS, Section-III, Volume-I of the Bidding Documents)

Name of the Partner of JV

1 Name of Contract Undertaken

2 Contract Reference No. & Date of Award

3 Name and Address of the Employer/Utility for whom the Contract was executed by the firm

4(a)(i) Whether the Contract under reference was executed as □ Sole Contractor (Prime Contractor) or □ Partner of a Joint Venture (Tick only whichever is applicable) □ Sole Contractor (Prime Contractor) or □ Partner of a Joint Venture (Tick only whichever is applicable)

5 Whether the Other Partner of JV for the Contract under reference have manufactured and supplied at least one 345kV or above voltage class Equipment such as Circuit breaker/Isolator/Instrument transformer/Power Transformer/Reactor/Power Capacitor/Control & Protection Systems which is in satisfactory operation as on the Originally scheduled last date of bid submission (soft copy) as above If Yes, give the details a. Voltage Level of System ……. kV b. Name of the Equipment:….... c. Scope of Work- Manufacture/Supply:…....... d. In satisfactory Operation Since:…........ If Yes, give the details a. Voltage Level of System ……. kV b. Name of the Equipment:….... c. Scope of Work- Manufacture/Supply:…....... d. In satisfactory Operation Since:…........

6 Whether the Other Partner of JV for the Contract under reference have erected, tested and commissioned at least one (1) substation having minimum four (4) nos. AIS^/GIS^ Circuit Breaker equipped bays of 345kV or above voltage level during the last seven (7) years and these bays must be in satisfactory operation as on the Originally scheduled last date of bid submission (soft copy) as above If Yes, give the details a. Voltage Level of System ……. kV b. Name of the AIS/GIS Substation:….... c. No. of CB equpped bays:............ d. Scope of Work- erection/testing/commissioning:…....... e. Completed on:................. f. In satisfactory Operation Since:…........ If Yes, give the details a. Voltage Level of System ……. kV b. Name of the AIS/GIS Substation:….... c. No. of CB equpped bays:............ d. Scope of Work- erection/testing/commissioning:…....... e. Completed on:................. f. In satisfactory Operation Since:…........

7 Whether the Other Partner of JV for the Contract under reference have erected, tested and commissioned at least one (1) project of SVC/ FSC/STATCOM/ HVDC at 320kV or above voltage level in India during the last seven (7) years and the same must be in satisfactory operation as on the Originally scheduled last date of bid submission (soft copy) as above If Yes, give the details a. Voltage Level of System ……. kV b. Name of the project of SVC/FSC/STATCOM/HVDC:….... . c. Scope of Work- erection/testing/commissioning:…....... d. Completed on:................. e. In satisfactory Operation Since:…........ If Yes, give the details a. Voltage Level of System ……. kV b. Name of the project of SVC/FSC/STATCOM/HVDC:….... . c. Scope of Work- erection/testing/commissioning:…....... d. Completed on:................. e. In satisfactory Operation Since:…........

Details of documents uploaded in support of the above stated experience

5.0 The Bidder shall also furnish following documents/details with its bid. {Reference ITB clause 9.3 (c)}

5.1 The complete annual reports together with Audited statement of accounts of the company for last five years of its own (separate) immediately preceding the date of submission of bid.

Note I. In the event the bidder is not able to furnish the information of its own (i.e separate), being a subsidiary company and its accounts are being consolidated with its group/holding/parent company, the bidder should submit the audited balance sheets, income statements, other information pertaining to it only (not of its group/Holding/Parent Company) duly certified by any one of the authority [ (i) Statutory Auditor of the bidder /(ii) Company Secretary of the bidder or (iii) A certified Public Accountant] certifying that such information/documents are based on the audited accounts as the case may be.

II. Similarly, if the bidder happens to be a Group/Holding/Parent Company, the bidder should submit the above documents/information of its own (i.e. exclusive of its subsidiaries) duly certified by any one of the authority mentioned in Note-I above certifying that these information/documents are based on the audited accounts, as the case may be.

5.2 The Bidder should accordingly also provide the following information/documents (In case of JV bidders, information should be provided separately for all the Partners of JV in the given format):

Audited balance sheet and income statements for the last five years as per the following:

For Name of Other Partner-1 of JV For Name of Other Partner-2 of JV

A Years preceding to the bid opening Audited Balance Sheet and Income Statements enclosed Audited Balance Sheet and Income Statements enclosed

1st Year Yes Yes

2nd Year Yes Yes

3rd Year Yes Yes

4th Year Yes Yes

5th Year Yes Yes

Date : Printed Name :

Place : Designation :

Name of Package : STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

Package No : STATCOM Package - ST-01T

Specification No. : CC/T/W-STAT/DOM/A06/24/14931

Completion Period 23 months

: Attachments : General guidelines for filling up the Attachments STATCOM Package - ST-01T ORIGINAL

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

Specification No.: CC/T/W-STAT/DOM/A06/24/14931

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3(JV), 4, 4(A), 4(B), 5, 5(A), 6, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17,18, 19 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as perproforma provided in the bidding document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Attachment 8 Manufacturer’s Authorisation Form : To be furnished as per proforma provided in the bidding document, on the letter head of the each Manufactures proposed to supply main items. Not included here.

6 Attachment 14 Integrity Pact : To be submitted as per ITB Clause No. 9.3(n) and as per remarks in the Attach 14-IP.

7 Attachment 18 Safety Pact : To be submitted as per ITB Clause No. 9.3(r) and as per remarks in the Attach 18 SP.

8 Attachment-3(QR), Attachment 20, Attachment-21, Attachment-22, Attachment-23, Attachment-24, Attachment-25, Attachment-26, Attachment-27 & Attachment-28: To be submitted as per the provisions of the Bidding Documents ( Formats Attached seperately in Volume-III of Bidding Documents)

Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

Specification No.: CC/T/W-STAT/DOM/A06/24/14931 Sole Bidder 1

Yes JV (Joint Venture) 2

Enter following details of the bidder No

Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 2 0

Whether the bidder is an MSE (Micro & Small Enterprise) Joint Venture 2 2 0

Enter the Name of Registration Authority

Name of Sole Bidder

Address of Sole Bidder

Name of other Partner - 1

Address of other Partner - 1

Route-1 of Annexure-A(BDS)

Route-2 of Annexure-A(BDS)

Name of other Partner - 2 (more, if any) Joint venture Route

Address of other Partner - 2 (more, if any)

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-3(JV) Sole Bidder

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Joint Venture Agreement and Power of Attorney for Joint Venture*)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

This Attachment is Not Applicable

Name(s) and Addresse(s) of other partner(s)

The Joint Venture Agreement (as per the proforma attached at no. 15 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) and Power of Attorney for Joint Venture (as per the proforma attached at no. 14 in Section-VI, Sample Forms and Procedures, Conditions of Contract, Vol.-I of the Bidding Documents) are enclosed herewith Sole Bidder

Date : -- Printed Name : 0

Place : Designation : 23

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-3(QR)

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Qualifying Requirement Data)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

For our Qualifying Requirements Data, please refer Attachment-3(QR) of this volume.

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-4

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Form of Certificate of Origin and Eligibility)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We hereby certify that equipment and materials to be supplied are produced in [Name of Countries], eligible source country. Equipments & Materials produced in [Name of countries] Company incorporated & registered in [Name of countries]

We hereby certify that our company is incorporated and registered in [Name of Countries], eligible source country. [Name of Countries] [Name of Countries] [Name of Countries], [Name of Countries],

Date : -- Printed Name :

Place : Designation :

country. country. [Name of Countries], [Name of Countries],

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-4(A)

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

S.No. For Equipment Item Description Unit Quantity

Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-4(B)

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles which are to be taken back after the completion of the work by us are not included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-5

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Bought-out & Sub-contracted Items)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We hereby furnish the details of the items/ sub-assemblies, we propose to buy for the purpose of furnishing and installation of the subject Package:

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

We hereby declare that, we would not subcontract the erection portion of the contract without the prior approval of Employer.

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.

Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.

Name of Plant Address

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Annexure I to Attachment-5

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Annexure I to Attachment-5

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Details of the proposed sub-contractor/sub-vendor Details of the proposed sub-contractor/sub-vendor

Name Nationality

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-5A

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)

Bidder's Name and Address: Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

1 We hereby furnish the details of the items, components, raw material, services which we propose to buy/avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the subject package:

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)

Name Category (Micro or Small)

2 The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms and Procedures, Volume-I of bidding documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract.

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.

Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.

Name of Plant Address

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-5A

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)

Name Category (Micro or Small)

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-6

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Annexure I toAttachment-6

(Alternative, Deviations and Exceptions to the Provisions)

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-7

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Details of Alternative Bid)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

No Alternative Bid

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Work Completion Schedule)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject Package i.e., STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)" for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of contract

1 Detailed Engineering and drawing submission

a) commencement

2 Procurement of equipment/ components & assembly

a) commencement

a) commencement

4 Manufacturing

a) commencement

5 Shipments & Delivery

a) commencement

6 Establishment of site office

7 Installation at Site

a) commencement

8 Testing & Pre-commissioning

a) commencement

9 Trial Operation

a) commencement

Note : Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-10

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Guarantee Declaration)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

For Guarantee Declaration, please refer Attachment-10 of this Volume.

Date -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-11

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We declare that we are aware of and have gone through the “Code of Business Conduct and Ethics for Senior Management Personnel”1 and “Code of Business Conduct and Ethics for Board Members”1 of POWERGRID (hereinafter referred to as the “Code of Conduct”). We further understand that as per the “Code of Conduct”, Senior Management Personnel including Board Members, who have retired/resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred “Code of Conduct”, within 1 year from the date of cessation of service/directorship unless approved by the Competent Authority. Accordingly, we hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation*

*In case the date of joining in the bidder’s organization of such ex-employee is within 1 year from the date of retirement/resignation from POWERGRID, No Objection Certificate/ approval from the Competent Authority must be furnished along with the bid or subsequent through clarification pursuant to ITB Clause 21.

In case of non-submission of No Objection Certificate/approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard. We further declare that any misrepresentation or submission of false/forged documents/information in this regard shall be dealt with as per the provisions of the Integrity Pact and/or the Bidding Documents and/or POWERGRID’s policy and procedures.

Date : -- Printed Name :

Place : Designation :

Note: 1. “Code of Business Conduct and Ethics for Senior Management Personnel” and “Code of Business Conduct and Ethics for Board Members” are available on POWERGRID’s website https://www.powergrid.in. 2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid. 3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated ‘-‘ against the same, it shall be deemed that they have not employed any such person in their organization.

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 ATTACHMENT-12

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Price Adjustment Data)

Bidder’s Name and Address (Sole Bidder) : To:

0 Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No.-2

Gurgaon (Haryana) - 122001

WE HAVE QUOTED OUR BID PRICE ON FIRM PRICE BASIS

We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the subject package. The necessary documentary evidence is enclosed.

Sl. No. Name of Materials/Labour Value of co-efficient Name of the published index Value of index

In accordance with Clause 2, Appendix-2, Form of Contract Agreement, Section-VI; Forms. Volume-I

A) For Equipment Ex-Works Price Component

I Reactor (excluding Insulating Oil) (ratings above 10MVAR or voltage above 33kV up to 400kV)

i) Copper a= Price Indices for copper wire rod, as published by IEEMA.

ii) Electrical Lamination Steel b= Price of CRGO Electrical Steel Lamination as published by IEEMA.

iii) Construction Steel c= Average price of Steel Plates (10mm thick), as published by IEEMA

iv) Insulating Material d= Price of Insulating Materials , as published by IEEMA.

v) Labour l= Indian field labour index – namely All-India Average Consumer Price Index Numbers for Industrial Workers (monthly) (Base 2016=100), as published by Labour Bureau, Shimla, Government of India (http://labourbureaunew.gov.in)

ERROR -Sum of all the coefficients including labour is not equal to 0.85

The sum of all the coefficients including labour shall be a+b+c+d+l=0.85

II Insulating oil for Reactors (ratings above 10MVAR or voltage above 33kV up to 400kV):

a) Insulating Oil e= 0.85 Transformer Oil (TO): Transformer oil conforming to IS:335-1993, supplied in drum(Ex-Refinery, Mumbai) as published by IEEMA.

I Circuit Breaker

a) Raw Material

b) Labour l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

a) Raw Material

b) Labour I= l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

II Capacitive VoltageTransformer

a) Raw Material

b) Labour l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

III Current Transformer

a) Raw Material

b) Labour l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

a) Raw Material

b) Labour l= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

V Surge Arrester

a) Raw Material

b) Labour I= Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The sum of the value of coefficients for raw materials: a+b+c+d=0.55 to 0.65 and sum of all the coefficients including labour shall be a+b+c+d+l=0.85.

VI PVC/XLPE Insulated Power and Control Cable

a) a=PVC Compound 0.15

b) Published Price of Metal IEEMA

i) Aluminium per MT IEEMA

ii) Copper per MT IEEMA

c) Weight in MT of Metal per kM (Size wise)

VII Substation Structures

i) Lattice Steel Structures & Pipe Structures (including bolts & nuts, washers & foundation bolts)

a) Raw Materials

i) a=Structural steel 0.58 JPC Market Price (Retail) for average Price of Steel Angles of size 50 x 50 x 6 mm of all cities in Rs./MT as published by Joint Plant Committee(JPC).

ii) b=Electrolytic Zinc 0.16 IEEMA

b) Labour 0.11 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

VIII. Series Reactor [ 420 kV, 12 ohm, 2500A, 1-ph air core dry type Series Reactor]

a) Raw Material Copper(a)

i) Aluminium(a) Aluminium(a)

b) Labour I= 0.85 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2001= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

The value of coefficient for raw materials: a=0.65 to 0.73 and value of coefficient for labour shall be between 0.12 and 0.20, so that sum of all the coefficients including labour shall be a+l=0.85

B. For Installation Price Component

I Installation price component (including Civil works but excluding ‘supply & placement of reinforcement steel’ and ‘concreting’)

i) Labour I= 0.80 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

II Supply & Placement of Reinforcement Steel

i) HSD 0.10 Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

ii) Labour I= 0.05 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

iii) Manufacture of Basic Metals 0.65 Wholesale Price Index Number for `Manufacture of Basic Metals’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

III For Concereting

i) HSD 0.20 Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

ii) Labour I= 0.10 Indian field labour index – namely All India average consumer price index for Industrial Workers (monthly) (Base: 2016= 100), as published by Labour Bureau, Shimla, Government of India (www.labourbureau.nic.in).

iii) Manufacture of cement, lime and plaster 0.30 Wholesale Price Index Number for `Manufacture of cement, lime and plaster’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in)

iv) Cutting, shaping and finishing of stone 0.20 Wholesale Price Index Number for `Cutting, shaping and finishing of stone’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

The Bidders are required to estimate and indicate the values of different coefficients for each of the items in the price variation formulae within the specified range such that their summation is as specified in the Bidding Documents. Where no value or ‘-’ or ‘shall be furnished later’ is specified against the coefficient, the same will be deemed to be zero and the fixed component would be suitably adjusted. If the values of all coefficients in price variation formulae indicated by the Bidder are within the specified range but their sum exceeds the summation specified in the Bidding Documents, the values of the coefficients shall be pro-rata adjusted such that the summation remains as per the provisions of the Bidding Documents. If the values of all coefficients indicated by the Bidder are within the specified range but their summation is less than the value specified in the Bidding Documents, the values of the coefficients as indicated by the Bidder shall be considered as such and the fixed component in the price variation formulae would be suitably adjusted. Further, if any of values of the coefficients indicated by the Bidder is out of the range specified in the Bidding Documents, the lower of the values, as indicated by the Bidder vis-à-vis lower value of the range for that coefficient specified in the Bidding Documents, shall be considered and the fixed component would be suitably adjusted.

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-13

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Declaration regarding Social Accountability)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-14

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

Integrity Pact is annexed herewith this Volume.

Date : -- Printed Name :

Place : Designation :

Instruction for printing & submitting Integrity Pact

1. The requisite format of Integrity Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other seven pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Integrity Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (o).

Power Grid Corporation of India Limited

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai,New Delhi – 110016 hereinafter referred to as

having its Registered Office at

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 1 of 8

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)" Package and Specification Number CC/T/W-STAT/DOM/A06/24/14931 POWERGRID values full compliance with all relevant laws of the land, rules, regulations, economic use of resources, and of fairness / transparency in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder/Contractor enter into this agreement called 'Integrity Pact' which will form a part of the bid.

It is hereby agreed by and between the parties as unde r:

Section I - Commitments of POWERGRID

(1) POWERGRID commits itself to take all measures necessary to prevent corruption and to observe the following principles :

a) No employee of POWERGRID, personally or through family members, will in connection with the tender, or the execution of the contract, demand, take a promise for or accept, for him/herself or third person, any material or other benefit which he/she is not legally entitled to.

b) POWERGRID will, during the tender process treat all Bidder(s) with equity, fairness and reason. POWERGRID will in particular, before and during the tender process, provide to all Bidder(s) the same information and will not provide to any Bidder(s) confidential/ additional information through which the Bidder(s) could obtain an advantage in relation to the tender process or the contract execution.

c) POWERGRID will exclude from evaluation of Bids its such employee(s) who has any personal interest in the Companies/Agencies participating in the Bidding/Tendering process and all known prejudiced persons.

(2) If POWERGRID obtains information on the conduct of any of its employee which is a criminal offence under the IPC / PC Act , or if there be a substantive suspicion in this regard, POWERGRID will inform its Chief Vigilance Officer and in addition disciplinary actions can be initiated under POWERGRID’s Rules.

Section II - Commitments of the Bidder/Contractor

(1) The Bidder/Contractor commits itself to take all measures necessary to prevent corruption. The Bidder/Contractor commits itself to observe the following principles during its participation in the tender process and during the contract execution:

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 2 of 8

a) The Bidder/Contractor will not, directly or through any other person or firm, offer, promise or give to any of POWERGRID's employees involved in the tender process or the execution of the contract or to any third person any material or other benefit which it is not legally entitled to, in order to obtain in exchange an advantage of any kind whatsoever during the tender process or during the execution of the contract.

b) The Bidder/Contractor will not enter into any illegal or undisclosed agreement or understanding, whether formal or informal with other Bidders/Contractors. This applies in particular to prices, specifications, certifications, subsidiary contracts, submission or non-submission of bids or actions to restrict competitiveness or to introduce cartelization in the bidding process.

c) The Bidder/Contractor shall not pass any information provided by POWERGRID as part of business relationship to others and shall not commit any offence under PC / IPC Act.

d) The Bidder/Contractor of foreign origin shall disclose the name and address of the Agents/representatives in India, if any, involved directly or indirectly in the Bidding. Similarly, the Bidder/Contractor of Indian Nationality shall furnish the name and address of the foreign principals, if any, involved directly or indirectly in the Bidding.

e) The Bidder/Contractor will, when presenting his bid, disclose any and all payments made, or committed to or intends to make to agents, brokers or any other intermediaries in connection with the award of the contract and/or with the execution of the contract.

f) The Bidder/Contractor will not misrepresent facts or furnish false/forged documents/information in order to influence the bidding process or the execution of the contract to the detriment of POWERGRID.

g) The Bidder/Contractor shall ensure adoption of Integrity Pact by its Sub-contractors and shall be responsible for the same.

(2) The Bidder/Contractor will not instigate third persons to commit offences outlined above or be an accessory to such offences.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 3 of 8

Section III- Disqualification from tender process and exclusion from future contracts

(1) If the Bidder, before contract award, has committed a transgression through a violation of Section II or in any other form such as to put his reliability or credibility as Bidder into question, POWERGRID may disqualify the Bidder from the tender process or terminate the contract, if already signed, for such reason.

(2) If the Bidder/Contractor has committed a transgression through a violation of Section II such as to put his reliability or credibility into question, POWERGRID may, after following due procedures, ban /blacklist the Bidder/Contractor in line with POWERGRID’s policy for “Black-Listing of Firms / Banning of Business”. The imposition and duration of the ban will be determined by the severity of the transgression. The severity will be determined by the circumstances of the case, in particular the number of transgressions, the position of the transgressors within the company hierarchy of the Bidder/Contractor and the amount of the damage. The ban will be imposed for a maximum of 3 years.

(3) If the Bidder/Contractor can prove that he has restored/recouped the damage caused by him and has installed a suitable corruption prevention system, POWERGRID may revoke the ban prematurely.

Section IV - Liability for violation of Integrity Pact

(1) If POWERGRID has disqualified the Bidder from the tender process prior to the award under Section III, POWERGRID is entitled for forfeiture of the Bid Guarantee under the Bid.

(2) If POWERGRID has terminated the contract under Section III or if POWERGRID is entitled to terminate the contract under Section III, POWERGRID shall be entitled to forfeit the Contract Performance Guarantee of this contract, in full or part thereof as may be decided, besides resorting to other remedies under the contract.

Section V- Previous Transgression

(1) The Bidder shall disclose in its Bid any transgressions occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country, that may impinge on the Anti-corruption principle.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 4 of 8

(2) If the Bidder makes incorrect statement on this subject, it can be disqualified from the tender process or the contract, if already awarded, can be terminated for such reason and further action can be taken in line with POWERGRID’s policies.

Section VI - Equal treatment to all Bidders / Contractors

(1) POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

(2) POWERGRID will disqualify from the tender process any bidder who does not sign this Pact or violate its provisions.

Section VII - Punitive Action against violating Bidders / Contractors

If POWERGRID obtains knowledge of conduct of a Bidder or a Contractor or its subcontractor or of an employee or a representative or an associate of a Bidder or Contractor or his Subcontractor which constitutes corruption, or if POWERGRID has substantive suspicion in this regard, POWERGRID will inform the Chief Vigilance Officer (CVO).

(*)Section VIII - Independent External Monitor/Monitors

(1) POWERGRID has appointed a panel of Independent External Monitors (IEMs) for this Pact with the approval of Central Vigilance Commission (CVC), Government of India. The names of the IEMs have been indicated in the Bidding Documents.

(2) The panel of IEMs shall review independently and objectively, whether and to what extent the parties comply with the obligations under this agreement. The panel of IEMs has right of access to all project documentation. The panel of IEMs may examine any complaint received by them and submit a report to Chairman-cum-Managing Director, POWERGRID, giving joint findings, at the earliest. The panel of IEMs may also submit a report directly to the CVO and the CVC, in case of suspicion of serious irregularities attracting the provisions of the PC Act.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 5 of 8

(3) The IEM is not subject to instructions by the representatives of the parties and performs his functions neutrally and independently. He / She reports to the Chairman-cum-Managing Director, POWERGRID.

(4) The Bidder(s)/Contractor(s) accepts that the IEM has the right to access without restriction to all documentation of POWERGRID related to this contract including that provided by the Contractor/Bidder. The Bidder/Contractor will also grant the IEM, upon his / her request and demonstration of a valid interest, unrestricted and unconditional access to their documentation. The same is applicable to Subcontractors. The IEM is under contractual obligation to treat the information and documents of the Bidder(s)/Contractor(s)/Subcontractor(s) with confidentiality.

(5) POWERGRID will provide to the IEMs information as sought by him / her which could have an impact on the contractual relations between POWERGRID and the Bidder/Contractor related to this contract. The IEMs shall also sign declaration on ’Non-Disclosure of Confidential Information’ and of ‘Absence of Conflict of Interest’. In case of any conflict of interest arising at a later date, the IEM shall inform Chairman-cum-Managing Director, POWERGRID and recuse himself/herself from that case

(6) As soon as the IEM notices, or believes to notice, a violation of this agreement, he / she will so inform the Chairman-cum-Managing Director, POWERGRID and request the Chairman-cum-Managing Director, POWERGRID to discontinue or take corrective action, or to take other relevant action. The IEM can in this regard submit non-binding recommendations. Beyond this, the IEM has no right to demand from the parties that they act in a specific manner, refrain from action or tolerate action. However, the IEM shall give an opportunity to POWERGRID and the Bidder/Contractor, as deemed fit, to present its case before making its recommendations to POWERGRID.

(7) The IEM will submit a written report to the Chairman-cum-Managing Director, POWERGRID within 8 to 10 weeks from the date of reference or intimation to him by POWERGRID and, should the occasion arise, submit proposals for correcting problematic situations.

(8) If the IEM has reported to the Chairman-cum-Managing Director, POWERGRID, a substantiated suspicion of an offence under PC / IPC Act, and the Chairman-cum-Managing Director, POWERGRID has not, within the reasonable time taken visible action to proceed against such offence or reported it to the CVO, the Monitor may also transmit this information directly to the CVC, Government of India.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 6 of 8

(9) While representing any matter in relation to the Integrity pact inter-alia including its transgression to the panel of IEMs, POWERGRID and Bidder/Contractor shall not approach the court of law and await the decision of the IEM in the matter.

(10) The word ‘IEM’ would include both singular and plural.

(*) This Section shall be applicable for only those packages wherein the IEMs have been identified in Section – I : Invitation for Bids and/or Clause ITB 9.3 in Section – III: Bid Data Sheets of Conditions of Contract, Volume-I of the Bidding Documents.

Section IX - Pact Duration

This Pact begins when both parties have legally signed it. It expires for the Contractor after the closure of the contract and for all other Bidder's six month after the contract has been awarded.

Section X - Other Provisions

(1) This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration/Conciliation clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under Integrity Pact.

(2) Changes and supplements as well as termination notices need to be made in writing. Side agreements have not been made.

(3) If the Contractor is a partnership firm or a consortium or Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venture partners.

(4) Nothing in this agreement shall affect the rights of the parties available under the General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

(5) Issues like Warranty/Guarantees etc. shall be outside the purview of IEMs.

(6) Views expressed or suggestions/submissions made by the parties and the recommendations of the CVO/IEM# in respect of the violation of this agreement, shall not be relied on or introduced as evidence in the arbitral/conciliation or judicial proceedings (arising out of the arbitral/conciliation proceedings) by the parties in connection with the disputes/differences arising out of the subject contract.

# CVO shall be applicable for packages wherein IEM are not identified in Section IFB/BDS of Condition of Contract, Volume-I. IEM shall be applicable for packages wherein IEM are identified in Section IFB/BDS of Condition of Contract, Volume-I.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Integrity Pact Page 7 of 8

(7) Should one or several provisions of this agreement turn out to be invalid, the remainder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Integrity Pact Page 8 of 8

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-15

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

Option for Interest Bearing Advance(s) (Initial Advance and/or Engineering Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

Bidder’s Name and Address (Sole Bidder) : Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

I We have read the provisions in the Bidding Documents regarding furnishing the option for advance payment. Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents, we hereby confirm to opt the following:

Interest Bearing Initial Advance

Supply Portion:

Services Portion:

Interest Bearing Engineering Advance:

II We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1. Name of the Supplier/ Contractor in whose favour payment is to be made

2. Address with PIN Code and State

Registered Office:

Correspondence Address:

3 (a). Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

3 (b). Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment /notification/order (Indicate Yes/No) Note: Documentary evidence is to be attached. Please refer remarks at the end of the Attachment.

3 (c). If 3(b) is 'Yes', please mentiom whether you are (Proprietary MSE/ Partnership MSE/Private Limited Company) owned by SC/ST Entrepreneurs.

3 (d). Are you a MSE owned by a women in line with Public Procurment Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurment Policy for Micro & Small Enterprises (MSEs) Amendment Order 2018 including subsequent amendment / notification/order . (Indicate Yes/No)

4. Permanent Account (PAN) No.

5. GSTIN Numbers

I. GSTIN in the Sates/UT from where the supply of goods take place

Name of the States/UT GSTIN number

II. GSTIN in the States/UT where the supply for services take place (states where sites under the subject package is situated)

Name of the States/UT GSTIN number

6. PF Registration No. of the Company

7. PF Regional Office covered (with Address)

8. Name of Contact Person

9. Contact Details

10. Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account:

Type of Account: Current Account

11. 9 digit MICR code printed at bottom in middle, next to cheque no.

12. IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

*The definition of MSEs owned by SC/ST is as given under:

a. In case of proprietary MSE, proprietor(s) shall be SC /ST.

b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.

c. In case of Private Limited companies, at least 51% share shall be held by SC/ST promoters.

Documentary evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-16

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Additional Information)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

In support of the additional information required as per ITB Sub-Clause 9.3 (p) of the Bidding Documents, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

1.0 The Bidder shall furnish

A certificate from their Banker(s) (as per prescribed formats in Form 16, Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers. [Reference ITB clause 9.3(p)(i)]

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Bidder (Sole Bidder)

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorization Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/are enclosed as per following details:

Sl. No. Letter Ref. Date Addressed to (name of the Bank)

2.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid. [Reference ITB clause 9.3(p)(ii)]

2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

3.0 Details regarding previous transgressions of Integrity Pact

The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertaking or Government Department or any other Company, in any country.

3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years

Year Name of client Details of Transgression of Integrity Pact by the bidder

4.0 OTHER INFORMATION

4.1 Current Contract Commitments of works in progress

Bidders (individual firms or each partners of JV) should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

4.2 Financial Data:

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

5.0 Details of Provident Fund Code Number of the Bidder [ref. ITB9.3(q)]

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-17

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Declaration for tax exemptions, reductions, allowances or benefits)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

1 We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us.

2 We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):

Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any

(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-17

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contract Services

Name : …… ……. …….. …… ……. …….. Power Grid Corporation of India Ltd.,

Address : …… ……. …….. …… ……. …….. "Saudamini", Plot No. 2, Sector 29

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-17

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-18

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

Safety Pact is attached herewith this Volume

Date : -- Printed Name :

Place : Designation :

Instruction for printing & submitting Safety Pact

1. The requisite format of Safety Pact is getting generated automatically and displayed here below.

2. Take print out of first page on a non-judicial stamp paper of Rs. 100/- and other six pages on plain A4 size paper. Such two sets shall be prepared by the bidder.

3. All the pages of both the copies of the Safety Pact shall be signed by the authorised representative of the bidder and duly stamped.

4. Both the original copies shall be submitted by the bidder in the form of Hard Copy as part of the first envelope before due date & time of submission of the bid.

5. For further details bidders may please refer ITB Clause 9.3 (s).

Between #REF! #REF!

Power Grid Corporation of India Limited #REF! #REF!

having its Registered Office at B-9, Qutab Institutional Area, Katwaria Sarai, New Delhi – 110016 hereinafter referred to as #REF! #REF!

"POWERGRID", #REF! #REF!

0 1 having its Registered Office at ,

having its Registered Office at ,, 1 AND

hereinafter referred to as

"The Bidder/Contractor"

POWERGRID intends to award, under laid-down organisational procedures, contract(s) for STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)" Specification Number:CC/T/W-STAT/DOM/A06/24/14931

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Safety Pact Page 1 of 6

POWERGRID values full compliance with all relevant laws and regulations and the principles of Safety, Health& Environment in its relations with its Bidders/ Contractors.

In order to achieve these goals, POWERGRID and the above named Bidder / Contractor enter into this agreement called “Safety Pact” which will form part of the Bid.

It is hereby agreed by and between the parties as under:

Section I - Commitments of POWERGRID

POWERGRID commits itself to take all measures necessary to prevent accidents duringConstruction and Operation of the Transmission Assets and to observe the following:

1. POWERGRID recognizes and accepts its statutory responsibilities for ensuring construction, operation and maintenance of equipments and for the provision of safe methods of work and safe working conditions.

2. POWERGRID recognizes and accepts its statutory responsibilities for ensuring safety of not only its employees but also that of the Contracting Agencies as Principal Employer.

3. POWERGRID shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction as well as Operation & Maintenance of the Transmission Assets.

4. POWERGRID shall conduct necessary awareness and training programmes to its Employees to augment the various safety requirements to be followed during Construction and Operation & Maintenance of the Transmission Assets from time to time.

5. POWERGRID shall, from time to time, issue necessary guidelines,instructions and deterrents to its employees as well as to the Contracting Agencies, to update them to take necessary preventive measures to avoid repetition of similar accident attributes.

6. POWERGRID shall review and provide necessary guidanceto the Contracting Agencies, as and when, any abnormality / special situations are brought to its notice by the Contracting Agencies during execution of the Transmission Projects being executed by them.

7. POWERGRID shall conduct periodical surveillance site inspections / audits to identify the unsafe conditions and unsafe actions, and bring them to the knowledge of the Contracting Agencies for taking timely corrective actions.

8. POWERGRIDshall investigate all accidents, fatal as well as non-fatal, to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents, and fix responsibility for the lapses leading to the accident.

9. POWERGRID shall augment the training to the workers and supervising personnel of the Contracting Agencies, as per schedules, upon nomination by the Contracting Agencies in reasonable time frame.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Safety Pact Page 2 of 6

10. POWERGRID shall exercise the right to claim and recover compensation from the Contracting Agencies in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the applicable Laws and contractual specifications / guidelines in vogue / issued by POWERGRID from time to time.

Section II – Commitments of the Bidder / Contractor:

The Bidder / Contractor commits himself to take all measures necessary to prevent / minimise accidents at their construction / erection sites and to observe the following:

1. The Bidder / Contractor recognizes and acceptsthe statutory and comprehensive responsibility for ensuring safe construction and Testing & Commissioning in the Transmission Projects being executed by them by providing safe methods of work, working conditions and Tools & Plants for human safety.

2. The Bidder / Contractor recognizes and accepts the responsibilities for ensuring safety of not only their employees but also that of the Sub-contractors, Principal Employer and the general public during execution of the Transmission Projects / works.

3. The Bidder / Contractor shall review the accidents in a structured manner and take necessary actions to ensure that the safety criteria are strengthened for safe construction of the Transmission Assets.

4. The Bidder / Contractor shall endeavour continuous development of safe methods of work to ensure that the effect of risks and perils are minimised to the extent possible and implement the same at their worksites.

5. The Bidder / Contractor shall conduct periodical Training to their Employees as well as to that of their Sub-contractors for safety awareness during construction works being executed by them.

6. The Bidder / Contractor shall provide all requisite Tools & Plants required for the work and ensure their healthiness by periodical inspections / testing as required. Unhealthy and sub-standard Tools & Plants will be immediately removed from site as and when they are identified.

7. The Bidder / Contractor shall,at their cost, provide all necessary Personal Protective Equipments such as Double Lanyard Safety Belts, Appropriate Fall Arrest Systems, Safety Helmets, Foot Wear, Hand Gloves, etc., as required for various activities pertaining to execution of the Projects / works, confirming to relevant Indian Standards.

8. The Bidder / Contractor shall ensure that dedicated qualified Safety Officers are posted in the construction projects being executed by them and ensure that the Safety Officer visits each and every gang periodically and conducts audits / inspections to identify the unsafe conditions and unsafe actions, to be rectified by the site supervising personnel promptly.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Safety Pact Page 3 of 6

9. The Bidder / Contractor shall conduct appropriate medical checks-up for the workers before deploying them at their construction sites to ensure that only those who are medically fit are deployed in the Projects / works to be executed by them. The copy of the Medical Reports shall be provided by the Bidder / Contractor to POWERGRID, whenever requested by POWERGRID.

10. The Bidder / Contractor shall screen the workers before deploying them at their construction sites to ensure that only those with the skills, experience and competence to work at height and also medically fit for work at height are deployed for work at height in the Projects executed by them.

11. The Bidder / Contractor shall ensure daily before starting the work that their site Supervising Personnel / Safety Officer briefs the workers about the work for the day and the safety measures / precautions required to be taken by them.

12. The Bidder / Contractor shall investigate all the accidents at their working sites to ascertain the lapses leading to the incident and the precautionary / corrective measures required to be taken to avoid recurrence of such accidents. These accidents will be reviewed at the Board Management level of the Agencies and the findings / recommendations will be put up to POWERGRID Apex Safety Board within the stipulated period.

13. The Bidder / Contractor shall ensure that all accidents, whether fatal or non-fatal in nature, will be informed to POWERGRID, in writing, immediately on the occurrence of the same,and in any case, within not more than 24 hours of occurrence of the same.

14. The Bidder / Contractor shall ensure that in case of any accident, all necessary medical help / support shall be provided to the victims / injured till they are completely fit to return to work.

15. The Bidder / Contractor shall ensure that in case of fatal accidents, all statutory Authorities, including Police, concerned Labour Dept. Officials, concerned Workmen Compensation Commissioner, etc., will be intimated in writing as required by the statutory Law, and followed up for compliance of all statutory obligations. The Bidder / Contractor shall own full responsibility of timely accident reporting to various authorities, including POWERGRID.

16. The Bidder / Contractor shall ensure that in case of fatality or serious injury leading to permanent disablement of the victims, the compensation amount will be deposited with the concerned authorities, as required by the Laws, and followed up for early disbursement to the beneficiaries of the victims.

17. The Bidder / Contractor assures that they shall co-operate to the fullest extent for carrying out any investigation of the accidents at their work sites by POWERGRID to identify the lapses, the reason for the accident / incident and suggest measures for prevention of recurrence of such accidents. All factual details of the occurrence of the accident will be provided to POWERGRID, as and when required.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Safety Pact Page 4 of 6

18. The Bidder / Contractor assures that they take full responsibility of meeting the statutory obligations in case of accidents, and in case of any reference by any Statutory Body at a later date also, they shall provide all information to POWERGRID and meet all the statutory obligations, including payment of additional compensation, if any.

19. The Bidder / Contractor assures that in case of any inspection of their work site or Notice by any Statutory Authority, they shall comply promptly and inform POWERGRID Site Officials of the same, and also provide all necessary information and assistance for smooth compliance of the observations / instructions of such Authorities.

20. The Bidder / Contractor accepts the provisions regarding safety, including payment of any sums to POWERGRID, in case of any violation of the safety requirements / provisions during execution of the Transmission Projects, as built in the Contractual Conditions, Safety Planand the Safety Pact, and confirm to abide by the same.

Section III – Equal treatment to all Bidders / Contractors:

1. POWERGRID will enter into agreements with identical conditions as this one with all Bidders.

2. POWERGRID will disqualify, from the tender process, any bidder/ take punitive actions on the bidder, who does not sign this Pact or violate its provisions.

Section IV – Pact Duration:

This Pact begins when both parties have legally signed it. It expires for the successful Bidder / Contractor after closure of the contract and, for all other Bidders, after the contract has been awarded.

Section V – Other Provisions:

1. This agreement is subject to Indian Law. Place of performance and jurisdiction is the establishment of POWERGRID. The Arbitration/Conciliation clause provided in the main tender document / contract shall not be applicable for any issue / dispute arising under the Safety Pact.

2. Changes and supplements need to be made in writing, which shall come into force only upon mutual agreement / acceptance.

3. If the Contractor is a partnership firm or consortium of Joint Venture, this agreement must be signed by all partners, consortium members and Joint Venue partners, as applicable as per the Tender Specifications.

4. Nothing in this agreement shall affect the rights of the parties available under General Conditions of Contract (GCC) and Special Conditions of Contract (SCC).

5. Should one or several provisions of this agreement turn out to be invalid, the reminder of this agreement remains valid. In this case, the parties will strive to come to an agreement to their original intentions.

(Signature) (Signature)

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

Safety Pact Page 5 of 6

Signature Signature

(For & On behalf of POWERGRID) (For & On behalf of Bidder/ Contractor)

(Office Seal) (Office Seal)

Designation : Designation :

Witness 1 : Witness 1 :

Designation : Designation :

Witness 2 : Witness 2 :

Designation : Designation :

Safety Pact Page 6 of 6

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-19

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

Further, we hereby confirm that except as mentioned in the Attachment – 6 (Alternative, Deviations and Exceptions to the Provisions) hereof forming part of our First Envelope :

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-23

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

This has reference to the Terms & Conditions for the e-Reverse Auction mentioned in the Business Rules for STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)" [Specification No. :CC/T/W-STAT/DOM/A06/24/14931]

We confirm that:

1 The undersigned is authorized representative of the Bidder.

2 We have studied the e-Reverse Auction Terms & Conditions and the Business Rules governing the e-Reverse Auction as mentioned in your letter and confirm our agreement to them.

3 We understand that ASP shall arrange to demonstrate/ train (if not trained earlier) bidders’ nominated person(s), without any cost. They will also explain all the Rules related to e-Reverse Auction/ Business Rules Document to be adopted along with bid manual. We have further noticed that we at own discretion may ask for additional training to use the e-RA platform well in advance before start of the e-RA event by contacting the ASP at any suitable time. All such additional trainings shall also be free of cost.

We hereby confirm that we will honor the Bids placed by us during the auction process.

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-25

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Undertaking by the bidder regarding Compliance of DMI&SP policy)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

1 We have read and understood the provisions of “Policy for providing preference to Domestically Manufactured Iron & Steel Products in Government Procurement” (hereinafter “DMI&SP policy”) issued by Ministry of Steel, Government of India vide Notification dated 8th May 2017 and its revision dated 29th May 2019 and including subsequent amendments/ modifications, if any.

2 We undertake that we shall comply with the requirement of DMI&SP policy including its subsequent amendments issued from time to time. Further, we undertake that in case of award on us, the requisite Affidavit of self-certification regarding Domestic Value Addition and/or Authorization certificate from the domestic manufacturer/ supplier of iron and steel products (whose HS codes are falling in Appendix-A of the DMI&SP policy as revised from time to time) included in the BoQ/ scope of the package shall be submitted by us to Employer before supply of the said iron and steel products required under the contract.

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-26

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

Certification by the Bidder per order no. F.No.6/18/2019-PPD dated 23/07/2020 issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order) in line with ITB 2.1

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

We have read and understood the provisions of Order no. F.No.6/18/2019-PPD (Order Public Procurement no.1) dated 23/07/2020 regarding “Restriction under Rule 144(xi) of General Financial Rules” and F.No.6/18/2019-PPD (Order Public Procurement no.2) dated 23/07/2020 regarding “Exclusions from Restriction under Rule 144(xi) of General Financial Rules” issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India [hereinafter collectively “DoE Order’’] and any subsequent modifications/Amendments, if any.

Particularly, we, the Bidder, have read the clause regarding restrictions on procurement from a ‘Bidder of a country which shares a land border with India’ and on sub-contracting to contractors from such countries.

We certify that we, the bidder is/are not from such a country or, if from such a country, has been registered as per provisions of the Bidding Documents with the Competent Authority and will not subcontract any work to a subcontractor/sub vendor from such countries unless such subcontractor/sub vendor fulfils all requirement in this regard and is eligible to be considered. [Where applicable, evidence of valid registration by the Competent Authority shall be attached.]

We further declare that any misrepresentation or submission of false/forged document/information in this regard shall be dealt with as per the provisions of Integrity Pact and/or Bidding Documents and/or POWERGRID’s policy and procedures.

Date : -- Printed Name :

Place : Designation :

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Attachment-28

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(Undertaking regarding submission of original/Hard copy part of the bid)

Bidder’s Name and Address (Sole Bidder) : To:

Contract Services

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No. 2, Sector 29

Gurgaon (Haryana) - 122001

1.0 We have read the provisions of the bidding documents regarding submission of original/ Hard copy part of the bid. Accordingly, as per ITB Clause 9(I) of the Bidding Documents, we hereby confirm the following: (i) We have uploaded the scanned copy of the requisite documents in accordance with the bidding provisions along with the soft part of the bid. (ii) We shall furnish all the original/Hard copy part of the bid in physical form on receipt of request from the Employer. Further, there shall be no contradictions/ inconsistencies between the documents submitted in physical form and the scanned version submitted along with the soft part of the bid. 2.0 We also accept that in case of our failure of submission of documents in original/hard part, the same shall be considered as withdrawal of bids and Employer has the right to take punitive measures against us as deemed fit.

Date : -- Printed Name :

Place : Designation :

[Note: The Bidder (Lead Partner in case of Joint Venture) shall submit the undertaking on the company’s letterhead].

Specification No. :CC/T/W-STAT/DOM/A06/24/14931 Bid Form 1st Envelope 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No. 5 five 5 th 5 May

Date : -- 6 six 6 th #VALUE! 6 June

7 seven 7 th #VALUE! 7 July

To: 8 eight 8 th #VALUE! 8 August

Contract Services 9 nine 9 th #VALUE! 9 September

Power Grid Corporation of India Ltd., 10 ten 10 th 10 October

"Saudamini", Plot No. 2, Sector 29 11 eleven 11 th 11 November

Gurgaon (Haryana) - 122001 12 twelve 12 th 12 December

13 thirteen 13 th

14 fourteen 14 th

Name of Contract : STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)" 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

1.0 Having examined the Bidding Documents, including Amendment Nos. ...[Enter the Amendment]… dated …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). ...[Enter the Amendment]… …[Enter the Date in dd-mm-yyyy]… the receipt of which is hereby acknowledged, we the undersigned, offer to design, manufacture, test, deliver, install and commission (including carrying out Trial operation, Performance & Guarantee Test as per the provision of Technical Specification) the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with ITB Clause 9.1 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in two envelopes i.e. First Envelope – Techno – Commercial Part & Second Envelope - Price Part (to be opened subsequently). 17 seventeen 17 th

1.1 We meet the eligibility requirements and have no conflict of interest in accordance with ITB Clause 2.

2.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details here. Pay Order 19 nineteen 19 th

(a) Attachment 1 : Not Applicable Bank Guarantee INR Banks certified Cheque Zero 20 twenty 20 th

(b) Attachment 2: A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. Bank Guarantee (0) 21 st

(c) Attachment 3 : The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3 (c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents Attachment-3(QR). 22 th

Further, the required Joint Venture Agreement signed by us and our Partners has also been furnished as per your format Attachment-3(JV). #REF! Applicable 23 th

Further the required deed of Joint Undertaking signed by us and Tower Manufacturer has also been furnished as per your format. 0 #REF! Not Applicable 24 th

(d) Attachment 4 : The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facilities offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4. A list of Special Tools & Tackles to be used by us for erection, testing & Commissioning and to be handed over to Employer, the cost of which is included is our Bid Price, is also enclosed as per your format as Attachment 4A. A list of Special Tools & Tackles to be brought by the contractor for erection, testing & Commissioning and to be taken back after completion of work, whose cost in not included in our bid price, is enclosed as per your format as Attachment 4B. 25 th

(e) Attachment 5 : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 26 th

(f) Attachment 5A : Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises

(g) Attachment 6 : The variation and deviations from the requirements of the Conditions of Contract, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter alia, the cost of withdrawal of the variations and deviations indicated therein. 27 th

(h) Attachment 7 : The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. (Not Applicable) 28 th

(i) Attachment 8 : Manufacturer’s Authorisation Forms. 29 th

(j) Attachment 9 : Work Completion Schedule. 30 th

(k) Attachment 10 : Guarantee Declaration. 31 st

(l) Attachment 11 : Information regarding ex-employees of Employer in our firm.

(m) Attachment 12 : Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents.

(n) Attachment 13 : Declaration regarding Social Accountability.

(o) Attachment 14 : Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.

(p) Attachment 15 : Option for Interest Bearing Advance(s) (Initial Advance and/or Engineering Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(q) Attachment 16 : Additional Information.

(r) Attachment 17 : Declaration for tax exemptions, reductions, allowances or benefits

(s) Attachment 18 : Safety Pact

(t) Attachment 19 : Declaration.

(u) Attachment 20 : Declaration of Key Managerial Person jointly with Power of Attorney holder

(v) Attachment 21: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII Order and MoP Order, if applicable

(w) Attachment 22: Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII Order and MoP Order, if applicable

(x) Attachment 23: Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA.

(y) Attachment 24: Declaration by the Bidder regarding events encountered pursuant to ITB Clause 2.1

(z) Attachment 25: Undertaking by the bidder regarding Compliance of DMI&SP policy

(aa) Attachment 26: Certification by the Bidder as per DoE Order in line with ITB Clause 2.1

(bb) Attachment 27: Bid Securing Declaration to be submitted by the Bidder.

(cc) Attachment 28: Undertaking regarding submission of original/Hard copy part of the bid

(dd) Attachment 29: Declaration by the bidder for ‘Code of Integrity for Public procurement’

3.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

4.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

4.1 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

4.3 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

5.0 Construction of the Contract

5.1 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us two separate Contracts viz ‘First Contract’ for ex-works supply of all equipment and materials including mandatory spares and ‘Second Contract’ for providing all the services i.e. inland transportation for delivery at site, In-transit insurance, unloading, handling at site, installation, testing and commissioning including Trial operation in respect of all the equipment supplied under the ‘First Contract’ and other services specified in the Contract Documents. We declare that the award of two contracts, will not, in any way, dilute our responsibility for successful operation of plant/equipment and fulfillment of all obligations as per Bidding Documents and that both the Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the other contract which will confer on you the right to terminate the other contract at our risk and cost.

6.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:

(a) GCC 2.14 Governing Law

(b) GCC 5 Contractor’s Responsibilities

(c) GCC 8 Terms of Payment

(d) GCC 9.3 Performance Security

(e) GCC 10 Taxes and Duties

(f) GCC 21.2 Completion Time Guarantee

(g) GCC 22 Defect Liability

(h) GCC 23 Functional Guarantee

(i) GCC 25 Patent Indemnity

(j) GCC 26 Limitation of Liability

(k) GCC 38 Settlement of Disputes

(l) GCC 39 Arbitration

(m) GCC 40 Conciliation

(n) Appendix 2 to Form of Contract Agreement Price Adjustment

Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.

7.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.

8.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

9.0 We agree to abide by this bid for a period of six (06) months from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.

10.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

11.0 We understand that you are not bound to accept the lowest or any bid you may receive.

12.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions. 2

13.0 We are a Micro and Small Enterprise (MSE) registered with , a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012, Notification dated 01/06/2020 read in conjuction with related notifications issued from time to time for such enterprises. 2

14.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

15.0 We, hereby, declare that we, along with our associate/ collaborators/ sub-contractors/ sub-vendors/consultants/ service providers shall strictly adhere to the POWERGRID Whistle Blower and Fraud Prevention Policy. We, along with our associate / collaborator / subcontractors / sub-vendors / consultants / service providers shall observe the highest standard of ethics and shall not indulge or allow anybody else working in our organization to indulge in fraudulent activities during execution of the contract and would immediately apprise the Employer about any fraud or suspected fraud as soon as it comes to our notice.

Thanking you, we remain,

Yours faithfully,

For and on behalf of

Date : -- Printed Name :

Place : Designation :

In case of bid from a Joint Venture, name & designation of representative of JV partner is to be provided and Bid Form is also to be signed by him

#REF! Printed Name :

#REF! Designation :

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

23 Twenty Three

27 Twenty Seven

28 Twenty Eight

33 Thirty Three

37 Thirty Seven

38 Thirty Eight

73 Seventy Three

74 Seventy Four

75 Seventy Five

77 Seventy Seven

78 Seventy Eight

79 Seventy Nine

83 Eighty Three

87 Eighty Seven

88 Eighty Eight

93 Ninety Three

97 Ninety Seven

98 Ninety Eight

100 One Hundred

Package Name: STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

Spec no. Specification No: CC/T/W-STAT/DOM/A06/24/14931

Specification No: CC/T/W-STAT/DOM/A06/24/14931

1 Fill up only green shaded cells in Sch-1, Sch-2, Sch-3, Sch-4, Sch-7 and Bid Form 2nd Envelope.

2 All the cells in Sch-5 & Sch-6 are auto filled, therefore no cell is required to be filled up there.

3 Instructions / error messages, if any, will be displayed automatically after selecting the cell.

4 After filling up all the schedues, save the file, take print out of all the schedules and Bid form and sign & stamp and submit them as hard copy of the 2nd envelope (Price part) of the bid. Also ensure to submit the soft copy of the the same file on CD/ DVD.

I While filling up the worksheets following may please be observed :

(i) Fill up only green shaded cells.

(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.

(iii) Select only the options provided in pull down menus.

(iv) Do not link any cell of this work book with any other work book.

(v) Do not use copy & paste or cut & paste options for filling up the data.

(vi) Do not reformat any of the cell of the work book.

II This Workbook consists of following worksheets :

Opening page of the workbook.

Names of Bidder :

● Select Sole Bidder from the pull down menu. Do not leave this cell blank.

● Fill up names and address of the Sole Bidder.

● Fill up date in dd-mmm-yyyy format from drop down menu.

● Click for Sch-1 given at the right top of the worksheet to go to Sch-1.

Sch-1 (Ex-works Prices) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Corresponding cell for mode of transaction shall be come enable only after filling up the unit rate, therefore first fill up the unit rate and then mode of transaction for the corresponding item.

● Total amount shall get calculated automatically.

● Type Test charges shall appear automatically after filling up Sch-7 appropriately.

Sch-2 (Freight & Insurance Charges) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-3 (Erection Charges) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-4a (Training Charges) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-4b (Maintenance Charges during and after Defect Liability Period) :

● Fill up unit rates for all the items in numeric values greater than 0 (zero). If unit rate is left blank, the corresponding item shall be deemed to be included in the total price.

● Total amount shall get calculated automatically.

Sch-5 (Summary of Taxes and Duties applicable on the Goods) :

● No cell is required to be filled in by the bidder in this worksheet.

● Summary of all the Schedules without considering discount (mentioned in the work sheet discount) shall be displayed automatically.

● No cell is required to be filled in by the bidder in this worksheet.

Sch-7 (Type Test Charges) :

● Fill up the rates & location where type tests are proposed.

● Total of this Sch-7 shall automatically appear in Sch-1.

Bid from 2nd Envelope :

● Fill up ref. no. as bidder's ref no. of this letter.

● This letter shall consider the net price as per Sch-6 (After Discount).

● Fill up additional information as required.

Happy Bidding !

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

Specification No: CC/T/W-STAT/DOM/A06/24/14931 Sole Bidder 1

JV (Joint Venture) 2 or More

Enter following details of the bidder

Specify type of Bidder [Select from drop down menu] Sole Bidder 0

Name of Sole Bidder

Address of Sole Bidder

Name of other Partner - 1

Address of other Partner - 1

Name of other Partner - 2 (more, if any)

Address of other Partner - 2 (more, if any)

email ID of Bid Signatory

Mobile No. of Bid Signatory

Tel No. of Bid Signatory

Fax No. of Bid Signatory

Specification No: CC/T/W-STAT/DOM/A06/24/14931 Schedule - 1 Direct Total 0 Sole Bidder `

BO Total #REF! 0

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : 0 0 0 0 Power Grid Corporation of India Ltd., #REF!

Address : 0 0 0 0 "Saudamini", Plot No.-2

0 0 0 0 Sector-29,

0 0 0 0 Gurugram (Haryana) - 122001

Plant and Equipment (including Mandatory Spares Parts) to be supplied, including Type Test Charges for Tests to be conducted Direct

All Prices are in Indian Rupees. Bought-Out

SI. No. Item Description HSN Code Whether HSN in column ‘ 6 ’ is confirmed. If not indicate applicable the HSN code * Rate of GST applicable ( in %) Whether rate of GST in column ‘4’ is confirmed. If not indicate applicable rate of GST * Unit Qty. Unit Ex-works price (excluding GST) Total Ex-works price (excluding GST) GST Tax as confirmed by Bidder

# BIDDERS MUST QUOTE ONLY IN 01 (ONE) OUT OF THE 5 (FIVE) STATCOM OPTIONS GIVEN BELOW. BIDDERS SHALL NOT QUOTE IN MORE THAN 01 (ONE) OPTION. ACCORDINGLY, BIDDER SHALL QUOTE FOR THE SAME OPTION IN SCHEDULE 2 AND 3. 0 0 0.00 0

I STATCOM at 400kV Bus Section-I of 765/400kV KPS-1 S/S 0 0 0.00 0

Part-A MAIN ITEMS (As per Technical Specification) (VENDOR ASSESED QUANTITIES) 0 0 0.00 0

1# STATCOM STATION as per Option 1 of clause 2.1 of Section Project Technical Specification 0 0 0.00 0

1.1 STATCOM( ±300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories 0 0 0.00 0

1.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

1.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

1.2.1 Air Core Reactor 85334090 18 Set 2 Included 0.00 0 0 0.00 0

1.2.2 MV Switchgear 85321000 18 Set 2 Included 0.00 0 0 0.00 0

1.2.3 Instrument Transformers 85321000 18 Set 2 Included 0.00 0 0 0.00 0

1.2.4 Bus work for MSR 85389000 18 Set 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

1.3 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

1.3.1 Capacitor Bank 85321000 18 Set 1 Included 0.00 0 0 0.00 0

1.3.2 Series Air core reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

1.3.3 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

1.3.4 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

1.3.5 Bus work for MSC 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2# STATCOM STATION as per Option 2 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2.1 STATCOM( +425/-300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

2.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

2.2.1 Air Core Reactor 85334090 18 Set 2 Included 0.00 0 0 0.00 0

2.2.2 MV Switchgear 85321000 18 Set 2 Included 0.00 0 0 0.00 0

2.2.3 Instrument Transformers 85321000 18 Set 2 Included 0.00 0 0 0.00 0

2.2.4 Bus work for MSR 85389000 18 Set 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3# STATCOM STATION as per Option 3 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.1 STATCOM( +300/-425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

3.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.2 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

3.2.1 Capacitor Bank 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.2.2 Series Air core reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

3.2.3 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.2.4 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.2.5 Bus work for MSC 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.3 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

3.3.1 Air Core Reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

3.3.2 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.3.3 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.3.4 Bus work for MSR 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4# STATCOM STATION as per Option 4 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4.1 STATCOM( ±425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

4.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

4.2.1 Air Core Reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

4.2.2 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

4.2.3 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

4.2.4 Bus work for MSR 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

5# STATCOM STATION as per Option 5 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

5.1 STATCOM( +425/-550 MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

5.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

6.0 STATCOM Valve cooling system Included 0.00 0 0 0.00 0

6.1 Cooling system pump skid (with UMD) 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

6.2 Water to air Heat Exchanger 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

6.3 Cooling system pipes, valves etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

7.0 Coupling Transformer Bank Included 0.00 0 0 0.00 0

7.1 Coupling Transformer Single phase unit 85321000 18 Set 4 Included 0.00 0 0 0.00 0

7.2 Insulating oil for above 85049010 18 Set 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

8.0 STATCOM STATION Control, Protection, Monitoring & Automation system (As per Specification) 85321000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

9.0 Bus work Included 0.00 0 0 0.00 0

9.1 MV Bus work Including Neutral Grounding Transformer (if applicable), Surge Capacitor, Swithgear, Post Insulators, Bus Bar Material, Clamps ,Connectors, Earthing Material etc including all accessories. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

10.0 Erection hardware items & other miscellaneous item for STATCOM Station installation (if not covered under any head) 72169990 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

11.0 Lattice & pipe structures for STATCOM Station installations including pack plates/ packwashers and gusset plates, fasteners and foundation bolts. Included 0.00 0 0 0.00 0

11.1 Lattice Strctures 73082011 18 Lot 1 Included 0.00 0 0 0.00 0

11.2 Pipe Structures 73045930 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

13.0 Erection Hardware (400 kV Switchyard upto SF6 to Air Bushing) Included 0.00 0 0 0.00 0

13.1 Insulator strings, Disc Insulators, Hardware, Spacers, conductor(s), bus-bar material, cable trays, Bay MB, clamps, connectors including equipment connectors, junction box, earthwire, earthing material,insulating mat, risers, auxiliary earthmat (excluding main earthmat), pipes for equipment & lighting, all accessories etc. for the following Included 0.00 0 0 0.00 0

Layout Type (400kV I-type) Included 0.00 0 0 0.00 0

i) Coupling Transformer bay 72169990 18 Set 1 Included 0.00 0 0 0.00 0

13.2 Bus Post Insulator including support structures 85462040 18 Nos. 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

14.0 Illumination system Included 0.00 0 0 0.00 0

14.1 Illumination for STATCOM Station installation 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

14.2 Illumination for STATCOM Station buildings 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

14.3 Illumination system for 400kV switchyard extension area 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

14.4 Illumination system for 400kV GIS Hall Extension 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

15.0 Electrical station services & auxiliaries systems Included 0.00 0 0 0.00 0

15.1 415V Main switchboard 85371000 18 Set 1 Included 0.00 0 0 0.00 0

15.2 415V AC distribution board 85371000 18 Set 1 Included 0.00 0 0 0.00 0

15.3 220V DC distribution board 85371000 18 Set 2 Included 0.00 0 0 0.00 0

15.4 220V Battery system 85072000 28 Set 2 Included 0.00 0 0 0.00 0

15.5 220V Battery charger 85044030 18 Set 2 Included 0.00 0 0 0.00 0

15.8 UPS/UMD for STATCOM Station systems 85413090 18 Set 1 Included 0.00 0 0 0.00 0

15.9 Auxiliary supply system as per technical specification 85371000 18 Set 1 Included 0.00 0 0 0.00 0

15.10 Erection hardware items, Bus post insulators, clamps and Connectors, Structures & other miscellaneous item for LT transformer(s) installation 85049010 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

16.0 LT Cabling along with associated like clamps, glands, lugs and straight joints etc. Included 0.00 0 0 0.00 0

a) 1.1kV Grade Power Cables (PVC/XLPE insulated ) 85446020 18 Set 1 Included 0.00 0 0 0.00 0

b) 1.1kV Grade Control Cable (PVC insulated) 85446020 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

17.0 40 mm MS rod for Earth mat 72159090 18 LS 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

18.0 Mechanical station services & auxiliaries systems Included 0.00 0 0 0.00 0

18.1 Fire protection system Included 0.00 0 0 0.00 0

a) Fire protection system (HVW spray & Hydrant system) for Coupling transformers 84248990 18 Lot 1 Included 0.00 0 0 0.00 0

b) Hydrant system for STATCOM Station including buildings 84248990 18 Lot 1 Included 0.00 0 0 0.00 0

c) Smoke detection system for STATCOM building 85311020 18 Lot 1 Included 0.00 0 0 0.00 0

d) Smoke detection system for GIS Hall EXTENSION 85311020 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

18.2 Air conditioning & ventilation system Included 0.00 0 0 0.00 0

a) Air conditioning & ventilation system for STATCOM Station Buildings 84151090 28 Lot 1 Included 0.00 0 0 0.00 0

b) Air conditioning for LCR Room in GIS Hall extesnion 84151090 28 Lot 1 Included 0.00 0 0 0.00 0

c) ventilation system for GIS HALL Extesnion 84151090 28 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

18.3 Castle Key Interlock System for STATCOM Station as per Tech Spec. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

19.0 VMS for STATCOM Station & GIS Hall Extension 85287390 28 Lot 1 Included 0.00 0 0 0.00 0

# Marked Quantities Bidders must fill only 1 of the 5 options. Bidders shall not fill more than 1 option. Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

Part-B MAIN 400kV Switchyard Equipments/ systems (POWERGRID ASSESED QUANTITIES) Included 0.00 0 0 0.00 0

1.0 400kV Potential Transformer (Single Phase) 85359090 18 No. 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2.0 Surge Arrester (Gapless-336kV) (1-phase) 85353090 18 Nos. 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.0 420kV, 3000A/3150, 63kA, Single phase, SF6 Gas Insulated Bus Duct (GIB) outsideGIS Hall along with associated support structure 85389000 18 Mtr. 400 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4.0 420kV, SF6 to Air Bushing along with associated support structure for 3150A,63 kA for 1 sec. Single Phase 85389000 18 Nos. 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

5.0 420kV, 3150 A, 63 kA, SF6 GIS ICT bay module(For 400kV side of 765/400kV ICT) as per Section-Project, Technical specification 85359030 18 Set 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

6.0 420kV, 3150 A, 63 kA, SF6 GIS Tie bay module(without PIR) as per Section-Project, Technical specification 85359030 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

7.0 420kV, 3150 A, 63 kA, SF6 GIS Auxiliary Bus module Extension for Spare ICT connection (For 400kV side of 765/400kV ICT) as per Section-Project, Technical specification 85359030 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

8.0 Control & Relay Panels Included 0.00 0 0 0.00 0

8.1 Circuit Breaker Relay Panel Included 0.00 0 0 0.00 0

a) With Auto Reclose 85371000 18 Nos. 3 Included 0.00 0 0 0.00 0

b) Augmentation of existing Bus bar protection scheme for complete diameter 85371000 18 Set 1 Included 0.00 0 0 0.00 0

9.0 Substation automation system Included 0.00 0 0 0.00 0

9.1 Augmentation of existing Substation automation system for the STATCOM Station and associated 3 no. 400kV bays under present scope , upgradation of hardware and sofware and updation of dabase etc for completion of SAS augmentationas per technical specification 85371000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

10.0 Controlled switching device for 420kV, 3-Ph Circuit Breaker 85389000 18 No. 3 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

11.0 Structure Included 0.00 0 0 0.00 0

11.1 Fabrication, galvanising and supply of Lattice Structures (MS Steel), to be designed during detailed engineering, for towers, beams and equipment support structure including pack plates/ packwashers and gusset plates excluding fastners and foundation bolts. 73045930 18 MT 38 Included 0.00 0 0 0.00 0

11.2 Fabrication, galvanising and supply of fastners (nuts, bolts and washers), including step bolts for lattice and pipe structures to be designed during detailed engineering 73045930 18 MT 2 Included 0.00 0 0 0.00 0

11.3 Fabrication, galvanising and supply of foundtion bolts including nuts, check nut and wshers for lattice and pipe structures to be designed during detailed engineering 73045930 18 MT 3 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

12.0 Electrical auxiliaries supply systems (from existing ICT Tertiary) Included 0.00 0 0 0.00 0

12.1 Auxiliary Service transformer 33 kV / 433 V; XX kVA 85042100 18 Nos. 1 Included 0.00 0 0 0.00 0

12.2 66kV Circuit breaker (3-Phase) including support structure 85352113 18 Nos. 1 Included 0.00 0 0 0.00 0

12.3 66kV Isolator without earth switch (3-phase) 85359090 18 Nos. 1 Included 0.00 0 0 0.00 0

12.4 66kV Current transformer (1-phase) 85359090 18 Nos. 3 Included 0.00 0 0 0.00 0

12.5 66kV Potential transformer (1-phase) 85359090 18 Nos. 3 Included 0.00 0 0 0.00 0

12.7 Erection hardware (Al tube, clamps, spacers, connectors, earthing material risers, auxiliary earthmat, buried cable trenches/pipes, BPIs all accessories etc for extension of 52kV teritary bus of 765/400/33kV autotransformer) 72169990 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

13.0 PMU Included 0.00 0 0 0.00 0

13.1 PMU with GPS Clock (clock can be either internal or external) 85371000 18 EA 1 Included 0.00 0 0 0.00 0

13.2 WAMS Hardware - Time System (GPS receiver) 85371000 18 EA 1 Included 0.00 0 0 0.00 0

13.3 SUBSTATION GRADE LAYER 2 LAN SWITCH 85371000 18 EA 1 Included 0.00 0 0 0.00 0

13.4 SUBSTATION GRADE LAYER 3 LAN SWITCH 85371000 18 EA 1 Included 0.00 0 0 0.00 0

13.5 WAMS Miscellaneous - Armored Fibre Optic Cable and associated termination (e.g. L2 Switch) for connecting PMU panels located 85371000 18 EA 1 Included 0.00 0 0 0.00 0

13.6 LIU - FO PATCH PANEL-12 PORT 85371000 18 EA 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

# Marked Quantities Bidders must fill only 1 of the 5 options. Bidders shall not fill more than 1 option. Included 0.00 0 0 0.00 0

II STATCOM at 400kV Bus Section-II of 765/400kV KPS-1 S/S Included 0.00 0 0 0.00 0

Part-A MAIN ITEMS (As per Technical Specification) (VENDOR ASSESED QUANTITIES) Included 0.00 0 0 0.00 0

1# STATCOM STATION as per Option 1 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

1.1 STATCOM( ±300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

1.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

1.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

1.2.1 Air Core Reactor 85334090 18 Set 2 Included 0.00 0 0 0.00 0

1.2.2 MV Switchgear 85321000 18 Set 2 Included 0.00 0 0 0.00 0

1.2.3 Instrument Transformers 85321000 18 Set 2 Included 0.00 0 0 0.00 0

1.2.4 Bus work for MSR 85389000 18 Set 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

1.3 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

1.3.1 Capacitor Bank 85321000 18 Set 1 Included 0.00 0 0 0.00 0

1.3.2 Series Air core reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

1.3.3 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

1.3.4 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

1.3.5 Bus work for MSC 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2# STATCOM STATION as per Option 2 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2.1 STATCOM( +425/-300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

2.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

2.2.1 Air Core Reactor 85334090 18 Set 2 Included 0.00 0 0 0.00 0

2.2.2 MV Switchgear 85321000 18 Set 2 Included 0.00 0 0 0.00 0

2.2.3 Instrument Transformers 85321000 18 Set 2 Included 0.00 0 0 0.00 0

2.2.4 Bus work for MSR 85389000 18 Set 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3# STATCOM STATION as per Option 3 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.1 STATCOM( +300/-425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

3.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.2 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

3.2.1 Capacitor Bank 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.2.2 Series Air core reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

3.2.3 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.2.4 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.2.5 Bus work for MSC 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.3 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

3.3.1 Air Core Reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

3.3.2 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.3.3 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.3.4 Bus work for MSR 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4# STATCOM STATION as per Option 4 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4.1 STATCOM( ±425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

4.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

4.2.1 Air Core Reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

4.2.2 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

4.2.3 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

4.2.4 Bus work for MSR 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

5# STATCOM STATION as per Option 5 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

5.1 STATCOM( +425/-550 MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

5.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

6.0 STATCOM Valve cooling system Included 0.00 0 0 0.00 0

6.1 Cooling system pump skid (with UMD) 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

6.2 Water to air Heat Exchanger 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

6.3 Cooling system pipes, valves etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

7.0 Coupling Transformer Bank Included 0.00 0 0 0.00 0

7.1 Coupling Transformer Single phase unit 85321000 18 Set 3 Included 0.00 0 0 0.00 0

7.2 Insulating oil for above 85049010 18 Set 3 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

8.0 STATCOM STATION Control, Protection, Monitoring & Automation system (As per Specification) 85321000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

9.0 Bus work Included 0.00 0 0 0.00 0

9.1 MV Bus work Including Neutral Grounding Transformer (if applicable), Surge Capacitor, Swithgear, Post Insulators, Bus Bar Material, Clamps ,Connectors, Earthing Material etc including all accessories. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

10.0 Erection hardware items & other miscellaneous item for STATCOM Station installation (if not covered under any head) 72169990 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

11.0 Lattice & pipe structures for STATCOM Station installations including pack plates/ packwashers and gusset plates, fasteners and foundation bolts. Included 0.00 0 0 0.00 0

11.1 Lattice Strctures 73082011 18 Lot 1 Included 0.00 0 0 0.00 0

11.2 Pipe Structures 73045930 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

12.0 Erection Hardware (400 kV Switchyard upto SF6 to Air Bushing) Included 0.00 0 0 0.00 0

12.1 Insulator strings, Disc Insulators, Hardware, Spacers, conductor(s), bus-bar material, cable trays, Bay MB, clamps, connectors including equipment connectors, junction box, earthwire, earthing material,insulating mat, risers, auxiliary earthmat (excluding main earthmat), pipes for equipment & lighting, all accessories etc. for the following Included 0.00 0 0 0.00 0

Layout Type (400kV I-type) Included 0.00 0 0 0.00 0

i) Coupling Transformer bay 72169990 18 Set 1 Included 0.00 0 0 0.00 0

12.2 Bus Post Insulator including support structures 85462040 18 Nos. 3 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

13.0 Illumination system Included 0.00 0 0 0.00 0

13.1 Illumination for STATCOM Station installation 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

13.2 Illumination for STATCOM Station buildings 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

13.3 Illumination system for 400kV switchyard extension area 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

13.4 Illumination system for 400kV GIS Hall Extension 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

14.0 LT Cabling along with associated like clamps, glands, lugs and straight joints etc. Included 0.00 0 0 0.00 0

a) 1.1kV Grade Power Cables (PVC/XLPE insulated ) 85446020 18 Set 1 Included 0.00 0 0 0.00 0

b) 1.1kV Grade Control Cable (PVC insulated) 85446020 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

15.0 40 mm MS rod for Earth mat 72159090 18 LS 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

16.0 Mechanical station services & auxiliaries systems Included 0.00 0 0 0.00 0

16.1 Fire protection system Included 0.00 0 0 0.00 0

a) Fire protection system (HVW spray & Hydrant system) for Coupling transformers 84248990 18 Lot 1 Included 0.00 0 0 0.00 0

b) Hydrant system for STATCOM Station including buildings 84248990 18 Lot 1 Included 0.00 0 0 0.00 0

c) Smoke detection system for STATCOM building 85311020 18 Lot 1 Included 0.00 0 0 0.00 0

d) Smoke detection system for GIS Hall EXTENSION 85311020 18 Lot 1 Included 0.00 0 0 0.00 0

16.2 Air conditioning & ventilation system Included 0.00 0 0 0.00 0

a) Air conditioning & ventilation system for STATCOM Station Buildings 84151090 28 Lot 1 Included 0.00 0 0 0.00 0

b) Air conditioning for LCR Room in GIS Hall extesnion 84151090 28 Lot 1 Included 0.00 0 0 0.00 0

c) ventilation system for GIS HALL Extesnion 84151090 28 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

16.3 Castle Key Interlock System for STATCOM Station as per Tech Spec. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

17.0 VMS for STATCOM Station & GIS Hall Extension 85287390 28 Lot 1 Included 0.00 0 0 0.00 0

# Marked Quantities Bidders must fill only 1 of the 5 options. Bidders shall not fill more than 1 option. Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

Part-B MAIN 400kV Switchyard Equipments/ systems (POWERGRID ASSESED QUANTITIES) Included 0.00 0 0 0.00 0

1.0 400kV Potential Transformer (Single Phase) 85359090 18 No. 3 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2.0 Surge Arrester (Gapless-336kV) (1-phase) 85353090 18 Nos. 3 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.0 420kV, 3000A/3150, 63kA, Single phase, SF6 Gas Insulated Bus Duct (GIB) outsideGIS Hall along with associated support structure 85389000 18 Mtr. 400 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4.0 420kV, SF6 to Air Bushing along with associated support structure for 3150A,63 kA for 1 sec. Single Phase 85389000 18 Nos. 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

5.0 420kV, 3150 A, 63 kA, SF6 GIS ICT bay module(For 400kV side of 765/400kV ICT) as per Section-Project, Technical specification 85359030 18 Set 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

6.0 420kV, 3150 A, 63 kA, SF6 GIS Tie bay module(without PIR) as per Section-Project, Technical specification 85359030 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

7.0 420kV, 3150 A, 63 kA, SF6 GIS Auxiliary Bus module Extension for Spare ICT connection (For 400kV side of 765/400kV ICT) as per Section-Project, Technical specification 85359030 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

8.0 Control & Relay Panels Included 0.00 0 0 0.00 0

8.1 Circuit Breaker Relay Panel Included 0.00 0 0 0.00 0

a) With Auto Reclose 85371000 18 Nos. 3 Included 0.00 0 0 0.00 0

b) Augmentation of existing Bus bar protection scheme for complete diameter 85371000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

9.0 Substation automation system Included 0.00 0 0 0.00 0

9.1 Augmentation of existing Substation automation system for the STATCOM Station and associated 3 no. 400kV bays under present scope , upgradation of hardware and sofware and updation of dabase etc for completion of SAS augmentationas per technical specification 85371000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

10.0 Controlled switching device for 420kV, 3-Ph Circuit Breaker 85389000 18 No. 3 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

11.0 Structure Included 0.00 0 0 0.00 0

11.1 Fabrication, galvanising and supply of Lattice Structures (MS Steel), to be designed during detailed engineering, for towers, beams and equipment support structure including pack plates/ packwashers and gusset plates excluding fastners and foundation bolts. 73045930 18 MT 34 Included 0.00 0 0 0.00 0

11.2 Fabrication, galvanising and supply of fastners (nuts, bolts and washers), including step bolts for lattice and pipe structures to be designed during detailed engineering 73045930 18 MT 1 Included 0.00 0 0 0.00 0

11.3 Fabrication, galvanising and supply of foundtion bolts including nuts, check nut and wshers for lattice and pipe structures to be designed during detailed engineering 73045930 18 MT 3 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

12.0 PMU Included 0.00 0 0 0.00 0

12.1 PMU with GPS Clock (clock can be either internal or external) 85371000 18 EA 1 Included 0.00 0 0 0.00 0

12.2 WAMS Hardware - Time System (GPS receiver) 85371000 18 EA 1 Included 0.00 0 0 0.00 0

12.3 SUBSTATION GRADE LAYER 2 LAN SWITCH 85371000 18 EA 1 Included 0.00 0 0 0.00 0

12.4 SUBSTATION GRADE LAYER 3 LAN SWITCH 85371000 18 EA 1 Included 0.00 0 0 0.00 0

12.5 WAMS Miscellaneous - Armored Fibre Optic Cable and associated termination (e.g. L2 Switch) for connecting PMU panels located 85371000 18 EA 1 Included 0.00 0 0 0.00 0

12.6 LIU - FO PATCH PANEL-12 PORT 85371000 18 EA 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

# BIDDERS MUST QUOTE ONLY IN 01 (ONE) OUT OF THE 5 (FIVE) STATCOM OPTIONS GIVEN BELOW. BIDDERS SHALL NOT QUOTE IN MORE THAN 01 (ONE) OPTION. ACCORDINGLY, BIDDER SHALL QUOTE FOR THE SAME OPTION IN SCHEDULE 2 AND 3. Included 0.00 0 0 0.00 0

III STATCOM at 400kV Bus Section-I of 765/400kV KPS-3 S/S Included 0.00 0 0 0.00 0

Part-A MAIN ITEMS (As per Technical Specification) (VENDOR ASSESED QUANTITIES) Included 0.00 0 0 0.00 0

1# STATCOM STATION as per Option 1 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

1.1 STATCOM( ±300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

1.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

1.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

1.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

1.2.1 Air Core Reactor 85334090 18 Set 2 Included 0.00 0 0 0.00 0

1.2.2 MV Switchgear 85321000 18 Set 2 Included 0.00 0 0 0.00 0

1.2.3 Instrument Transformers 85321000 18 Set 2 Included 0.00 0 0 0.00 0

1.2.4 Bus work for MSR 85389000 18 Set 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

1.3 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

1.3.1 Capacitor Bank 85321000 18 Set 1 Included 0.00 0 0 0.00 0

1.3.2 Series Air core reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

1.3.3 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

1.3.4 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

1.3.5 Bus work for MSC 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2# STATCOM STATION as per Option 2 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2.1 STATCOM( +425/-300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

2.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

2.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

2.2.1 Air Core Reactor 85334090 18 Set 2 Included 0.00 0 0 0.00 0

2.2.2 MV Switchgear 85321000 18 Set 2 Included 0.00 0 0 0.00 0

2.2.3 Instrument Transformers 85321000 18 Set 2 Included 0.00 0 0 0.00 0

2.2.4 Bus work for MSR 85389000 18 Set 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3# STATCOM STATION as per Option 3 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.1 STATCOM( +300/-425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

3.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

3.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.2 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

3.2.1 Capacitor Bank 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.2.2 Series Air core reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

3.2.3 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.2.4 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.2.5 Bus work for MSC 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.3 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

3.3.1 Air Core Reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

3.3.2 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.3.3 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

3.3.4 Bus work for MSR 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4# STATCOM STATION as per Option 4 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4.1 STATCOM( ±425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

4.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

4.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included 0.00 0 0 0.00 0

4.2.1 Air Core Reactor 85334090 18 Set 1 Included 0.00 0 0 0.00 0

4.2.2 MV Switchgear 85321000 18 Set 1 Included 0.00 0 0 0.00 0

4.2.3 Instrument Transformers 85321000 18 Set 1 Included 0.00 0 0 0.00 0

4.2.4 Bus work for MSR 85389000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

5# STATCOM STATION as per Option 5 of clause 2.1 of Section Project Technical Specification Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

5.1 STATCOM( +425/-550 MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included 0.00 0 0 0.00 0

5.1.1 Valve complete with all accessories for STATCOM Unit 85413090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.2 Series reactor for STATCOM Unit 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.3 MV Switchgear for STATCOM Unit 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.4 MV Switchgear for STATCOM Unit including bypass switch 85372000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.5 Charging Resistor 85334090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.6 Instrument Transformers for STATCOM Unit 85359090 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.7 Bus work for STATCOM Unit 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.8 Wall Bushings 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

5.1.9 Other misc. item , accessories etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

6.0 STATCOM Valve cooling system Included 0.00 0 0 0.00 0

6.1 Cooling system pump skid (with UMD) 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

6.2 Water to air Heat Exchanger 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

6.3 Cooling system pipes, valves etc. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

7.0 Coupling Transformer Bank Included 0.00 0 0 0.00 0

7.1 Coupling Transformer Single phase unit 85321000 18 Set 4 Included 0.00 0 0 0.00 0

7.2 Insulating oil for above 85049010 18 Set 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

8.0 STATCOM STATION Control, Protection, Monitoring & Automation system (As per Specification) 85321000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

9.0 Bus work Included 0.00 0 0 0.00 0

9.1 MV Bus work Including Neutral Grounding Transformer (if applicable), Surge Capacitor, Swithgear, Post Insulators, Bus Bar Material, Clamps ,Connectors, Earthing Material etc including all accessories. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

10.0 Erection hardware items & other miscellaneous item for STATCOM Station installation (if not covered under any head) 72169990 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

11.0 Lattice & pipe structures for STATCOM Station installations including pack plates/ packwashers and gusset plates, fasteners and foundation bolts. Included 0.00 0 0 0.00 0

11.1 Lattice Strctures 73082011 18 Lot 1 Included 0.00 0 0 0.00 0

11.2 Pipe Structures 73045930 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

12.0 Special Tools and Tackles as per Technical Specification (excluding those covered T&P listed in Section-Project of TS) Included 0.00 0 0 0.00 0

i Custom Tansport Trolley for STATCOM Power Module 85413090 18 Set 1 Included 0.00 0 0 0.00 0

ii Secisor Lift 85413090 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

13.0 Special Tools and Tackles as per Technical Specification section project Annexure-III Included 0.00 0 0 0.00 0

i Clip on meter 85413090 18 Set 1 Included 0.00 0 0 0.00 0

ii Thermovision Camera 85413090 18 Set 1 Included 0.00 0 0 0.00 0

iii Capacitance bridge For detecting faulty capacitor units 85413090 18 Set 1 Included 0.00 0 0 0.00 0

iv Micro Ohm Meter for contact resistance measurement 85413090 18 Set 1 Included 0.00 0 0 0.00 0

v Battery Operated 5 KV Insulation Tester 85413090 18 Set 1 Included 0.00 0 0 0.00 0

vi Phase sequence meter 85413090 18 Set 1 Included 0.00 0 0 0.00 0

vii Transformer Winding Resistance Testing Kit 85413090 18 Set 1 Included 0.00 0 0 0.00 0

viii Digital Oscilloscope 85413090 18 Set 1 Included 0.00 0 0 0.00 0

ix Capacitance Inductance and resistance meter 85413090 18 Set 1 Included 0.00 0 0 0.00 0

x Automatic Relay testing unit 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xi Frequency Counter 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xii HARMONIC ANALYSER 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xiii Variac (single phase & three phase) power supply 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xiv Digital Multimeter 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xv Function generator 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xvi CT secondary winding magnetization kit 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xvii Impendence Analyser 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xviii Phase angle meter 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xix Vibration cum noise level meter 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xx Portable Earthing kit 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xxi Earth fault locator for floating dc system. 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xxii Precision Multi-meter 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xxiii Automatic Third Harmonic Resistance Measurement Kit for Gapless Surge Arrestor (LCM Kit) 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xxiv Test Equipment for Semiconductor power module 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xxv Toolkit to replace the Power module of STATCOM Valve 85413090 18 Set 1 Included 0.00 0 0 0.00 0

xxvi Instrument for measuring ground resistance and soil resistivity. 85413090 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

14.0 Erection Hardware (400 kV Switchyard upto SF6 to Air Bushing) Included 0.00 0 0 0.00 0

14.1 Insulator strings, Disc Insulators, Hardware, Spacers, conductor(s), bus-bar material, cable trays, Bay MB, clamps, connectors including equipment connectors, junction box, earthwire, earthing material,insulating mat, risers, auxiliary earthmat (excluding main earthmat), pipes for equipment & lighting, all accessories etc. for the following Included 0.00 0 0 0.00 0

Layout Type (400kV I-type) Included 0.00 0 0 0.00 0

i) Coupling Transformer bay 72169990 18 Set 1 Included 0.00 0 0 0.00 0

14.2 Bus Post Insulator including support structures 85462040 18 Nos. 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

15.0 Illumination system Included 0.00 0 0 0.00 0

15.1 Illumination for STATCOM Station installation 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

15.2 Illumination for STATCOM Station buildings 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

15.3 Illumination system for 400kV switchyard extension area 94059900 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

16.0 Electrical station services & auxiliaries systems Included 0.00 0 0 0.00 0

16.1 415V Main switchboard 85371000 18 Set 1 Included 0.00 0 0 0.00 0

16.2 415V AC distribution board 85371000 18 Set 1 Included 0.00 0 0 0.00 0

16.3 220V DC distribution board 85371000 18 Set 2 Included 0.00 0 0 0.00 0

16.4 220V Battery system 85072000 28 Set 2 Included 0.00 0 0 0.00 0

16.5 220V Battery charger 85044030 18 Set 2 Included 0.00 0 0 0.00 0

16.8 UPS/UMD for STATCOM Station systems 85413090 18 Set 1 Included 0.00 0 0 0.00 0

16.9 Auxiliary supply system as per technical specification 85371000 18 Set 1 Included 0.00 0 0 0.00 0

16.10 Erection hardware items, Bus post insulators, clamps and Connectors, Structures & other miscellaneous item for LT transformer(s) installation 85049010 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

17.0 LT Cabling along with associated like clamps, glands, lugs and straight joints etc. Included 0.00 0 0 0.00 0

a) 1.1kV Grade Power Cables (PVC/XLPE insulated ) 85446020 18 Set 1 Included 0.00 0 0 0.00 0

b) 1.1kV Grade Control Cable (PVC insulated) 85446020 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

18.0 40 mm MS rod for Earth mat 72159090 18 LS 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

19.0 Mechanical station services & auxiliaries systems Included 0.00 0 0 0.00 0

19.1 Fire protection system Included 0.00 0 0 0.00 0

a) Fire protection system (HVW spray & Hydrant system) for Coupling transformers 84248990 18 Lot 1 Included 0.00 0 0 0.00 0

b) Hydrant system for STATCOM Station including buildings 84248990 18 Lot 1 Included 0.00 0 0 0.00 0

c) Smoke detection system for STATCOM building 85311020 18 Lot 1 Included 0.00 0 0 0.00 0

19.2 Air conditioning & ventilation system Included 0.00 0 0 0.00 0

a) Air conditioning & ventilation system for STATCOM Station Buildings 84151090 28 Lot 1 Included 0.00 0 0 0.00 0

19.3 Castle Key Interlock System for STATCOM Station as per Tech Spec. 85389000 18 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

20.0 VMS for STATCOM Station 85287390 28 Lot 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

21.0 Mandatory Spares for STATCOM & 400 kV Bay Equipment Included 0.00 0 0 0.00 0

I. STATCOM Valve based on Semiconductor based Power module Included 0.00 0 0 0.00 0

a) “Semiconductor based Power module (sub-module) of Multimodule valve (10% of total population of STATCOM Valves, subject to minimum 20nos) 85413090 18 Set 1 Included 0.00 0 0 0.00 0

b) Gate control units of each type & rating 85413090 18 Set 5 Included 0.00 0 0 0.00 0

c) Optical fiber signal cable to the power module ( each length & type) 85413090 18 Set 1 Included 0.00 0 0 0.00 0

d) Insulators of each type and rating ( each length & type) 85413090 18 Set 5 Included 0.00 0 0 0.00 0

e) Gaskets (Complete replacement for STATCOM Station) 85413090 18 LS 1 Included 0.00 0 0 0.00 0

f) Epoxy bolts/nuts of each type (10% of each type) At least for replacement of 1-phase of STATCOM Branch 85413090 18 LS 1 Included 0.00 0 0 0.00 0

II. Module for Control, Protection, Communication, Annunciation, Alarm, SCADA & Monitoring, Disturbance Recorder including Power Supply Module (of each type and function.) 85389000 18 Set 1 Included 0.00 0 0 0.00 0

III. STATCOM Protection system Relays. Included 0.00 0 0 0.00 0

a) Protection Relay(IED)of each type 85389000 18 Nos. 2 Included 0.00 0 0 0.00 0

b) Bay Control Unit(IED) of each type 85389000 18 Nos. 2 Included 0.00 0 0 0.00 0

IV. 400 kV bay Protection system Spares. Included 0.00 0 0 0.00 0

a) Protection Relay(IED)of each type 85389000 18 Nos. 1 Included 0.00 0 0 0.00 0

b) Bay Control Unit(IED) of each type 85389000 18 Nos. 1 Included 0.00 0 0 0.00 0

V. STATCOM other equipments Included 0.00 0 0 0.00 0

a) Arrestor across Valve module (if applicable) 85413090 18 Nos. 2 Included 0.00 0 0 0.00 0

b) Arrestor across Valve (if applicable) 85413090 18 Nos. 2 Included 0.00 0 0 0.00 0

c) Grounding switch contact kit 85413090 18 Set 1 Included 0.00 0 0 0.00 0

d) Support porcelain of each type 85413090 18 Set 4 Included 0.00 0 0 0.00 0

e) Wall bushing of each type 85413090 18 Set 1 Included 0.00 0 0 0.00 0

f) Bypass Resistor, if applicable 85413090 18 Nos. 1 Included 0.00 0 0 0.00 0

g) Series Air core Reactor (no. of each type & rating) 85413090 18 Set 1 Included 0.00 0 0 0.00 0

h) Control cards, fuses, Semiconductor module etc. for Uninterrupted Power Supply (UPS) 85413090 18 Nos. 1 Included 0.00 0 0 0.00 0

VI. Coupling Transformer Included 0.00 0 0 0.00 0

a 420kV bushing with metal partsand Gaskets 85049010 18 Set 1 Included 0.00 0 0 0.00 0

b MV bushing with metal parts and gaskets 85049010 18 Set 1 Included 0.00 0 0 0.00 0

c Winding temp. indicator with contacts 85049010 18 Nos. 1 Included 0.00 0 0 0.00 0

d Oil temp. indicator with contacts 85049010 18 Nos. 1 Included 0.00 0 0 0.00 0

e Pressure relief device/safety valve 85049010 18 Nos. 1 Included 0.00 0 0 0.00 0

f Magnetic oil level gauge 85049010 18 Nos. 1 Included 0.00 0 0 0.00 0

g Bucholz relay 85049010 18 Nos. 1 Included 0.00 0 0 0.00 0

h Set of gaskets 85049010 18 Set 1 Included 0.00 0 0 0.00 0

i Set of valves 85049010 18 Set 1 Included 0.00 0 0 0.00 0

j Set of pressure gauges 85049010 18 Set 1 Included 0.00 0 0 0.00 0

k Set of pressure switches 85049010 18 Set 1 Included 0.00 0 0 0.00 0

l Set of hydraulic jacks suitable for lifting coupling transformer. 85049010 18 Set 1 Included 0.00 0 0 0.00 0

m Nitrogen sealing equipment 85049010 18 Set 1 Included 0.00 0 0 0.00 0

n Set of magnetic contactor, switches, fuses relays for electric control panel 85049010 18 Set 1 Included 0.00 0 0 0.00 0

o Insulating Oil 85049010 18 Kl 10 Included 0.00 0 0 0.00 0

VII Filter Bank, If applicable Included 0.00 0 0 0.00 0

a) Capacitor cans (10% of Each type and rating subject to minimum 5 units) 85389000 18 Set 1 Included 0.00 0 0 0.00 0

b) Resistor Element (if applicable)10 elements of each type and rating 85389000 18 Set 1 Included 0.00 0 0 0.00 0

c) Reactors of each type and rating 85389000 18 Set 1 Included 0.00 0 0 0.00 0

d) Arrestor of each type and rating 85389000 18 Set 1 Included 0.00 0 0 0.00 0

e) Support Insulator (5 nos. of each type and rating) 85389000 18 Set 1 Included 0.00 0 0 0.00 0

VIII. MSC Bank (if applicable) Included 0.00 0 0 0.00 0

a) Capacitor cans (10% of Each type and rating subject to minimum 5 units) 85329000 18 Set 1 Included 0.00 0 0 0.00 0

b) Series Reactor (Air Core) of Each type and rating 85329000 18 Set 1 Included 0.00 0 0 0.00 0

c) Support Insulator (5 nos. of each type and rating) 85329000 18 Set 1 Included 0.00 0 0 0.00 0

IX. MSR Bank (if applicable) Included 0.00 0 0 0.00 0

a) Aiir core reactor coil complete for 1-phase (one no. of each type & rating) 85339000 18 Set 1 Included 0.00 0 0 0.00 0

b) Support Insulator (5 nos. of each type) 85339000 18 Set 1 Included 0.00 0 0 0.00 0

X. MV AC System Included 0.00 0 0 0.00 0

a) CTs for one phase of each type and rating 85329000 18 Set 1 Included 0.00 0 0 0.00 0

b) Surge arrestor each type and rating 85354010 18 Set 1 Included 0.00 0 0 0.00 0

c) Voltage transformers (single phase) each type and rating 85359090 18 Set 1 Included 0.00 0 0 0.00 0

d) Contact kit for grounding switch each type and rating 73079210 18 Set 1 Included 0.00 0 0 0.00 0

e) Set of contact fingers for isolators for 3 phase each type and rating 85389000 18 Set 1 Included 0.00 0 0 0.00 0

f) Complete 3 phase isolator with operating mechanism each type and rating 85389000 18 Set 1 Included 0.00 0 0 0.00 0

i. Set of Insulator for above (Complete replacement for two isolator (3 ph)) 85389000 18 Set 2 Included 0.00 0 0 0.00 0

g) Set of relays, power contactors& switch fuses for electrical Control ckt. (Complete replacement for one isolator (3 ph)) 85389000 18 Set 1 Included 0.00 0 0 0.00 0

h) Rotary bearing for isolator (Complete replacement for one isolator (3 ph)) 85389000 18 Set 1 Included 0.00 0 0 0.00 0

i) MV Bus support insulators (10 nos. of each type and rating) 85389000 18 Set 1 Included 0.00 0 0 0.00 0

j) Surge Capacitor (if applicable) 85354010 18 Set 1 Included 0.00 0 0 0.00 0

k) One set of Spares consisting of following items for MV Circuit Breaker of each type Included 0.00 0 0 0.00 0

i. One complete Pole of CB including Interrupter, pole column, with operating mechanism and MB but without support structure. 85352913 18 No. 1 Included 0.00 0 0 0.00 0

ii. Rubber gaskets, O rings and seals (complete replacement for one breaker) 85389000 18 No. 1 Included 0.00 0 0 0.00 0

iii. Trip coils with resistor 85389000 18 No. 2 Included 0.00 0 0 0.00 0

iv. Closing coils with resistor 85389000 18 Sets 1 Included 0.00 0 0 0.00 0

v. Molecular filter for SF6 Circuit for 1 Pole of CB( If applicable) 85389000 18 No 2 Included 0.00 0 0 0.00 0

vi. Terminal pads and connectors 85389000 18 Nos 2 Included 0.00 0 0 0.00 0

vii. Relays, power contactors, switch-fuse units, limit switches, push buttons, timers and MCBs etc as applicable 85389000 18 Set 1 Included 0.00 0 0 0.00 0

viii. Pressure switches, if applicable 85389000 18 Set 1 Included 0.00 0 0 0.00 0

ix. Auxiliary Switch Assembly 85389000 18 Set 1 Included 0.00 0 0 0.00 0

x. Controlled switching device 85389000 18 No. 1 Included 0.00 0 0 0.00 0

XI. Valve Cooling System : Included 0.00 0 0 0.00 0

a) Fine Water Pump complete with Motor of each type 85389000 18 Set 1 Included 0.00 0 0 0.00 0

b) Resin (For one complete replacement of STATCOM Station) 85389000 18 Set 1 Included 0.00 0 0 0.00 0

c) Pump with motor except covered under serial no. a) above of each type and rating 85389000 18 Set 1 Included 0.00 0 0 0.00 0

d) Flex Pipes for complete replacement of STATCOM Station 85389000 18 Set 1 Included 0.00 0 0 0.00 0

e) Gaskets and “O” Ring of each type 85389000 18 Set 1 Included 0.00 0 0 0.00 0

f) Fan unit of Water to air heat exchanger 85389000 18 Nos. 2 Included 0.00 0 0 0.00 0

g) Set of Contactor, MCB, fuses,Control Card, Batteries etc for UMD/UPS (of each type & rating) 85389000 18 Set 1 Included 0.00 0 0 0.00 0

XII. AIR CONDITIONING & VENTILATION SYSTEM Included 0.00 0 0 0.00 0

a) AC Unit of each type and rating 84151090 28 Nos. 1 Included 0.00 0 0 0.00 0

b) Ventilation system motor of each type and rating 84151090 28 Set 1 Included 0.00 0 0 0.00 0

XIII. UPS Included 0.00 0 0 0.00 0

a) Set of Control Cards 85389000 18 Set 1 Included 0.00 0 0 0.00 0

b) Set of fuses & Switches 85389000 18 Set 1 Included 0.00 0 0 0.00 0

c) Spare Battery cell 85389000 18 Nos. 2 Included 0.00 0 0 0.00 0

XIV. Clamps and connectors of each type and rating 76169990 18 Set 1 Included 0.00 0 0 0.00 0

XV. 400 kV IVT-1 phase 85359090 18 Nos. 1 Included 0.00 0 0 0.00 0

XVI. Power PT along with accessories for complete replacement in one phase (if Applicable) 85359090 18 Nos. 1 Included 0.00 0 0 0.00 0

# Marked Quantities Bidders must fill only 1 of the 5 options. Bidders shall not fill more than 1 option. Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

Part-B MAIN 400kV Switchyard Equipments/ systems (POWERGRID ASSESED QUANTITIES) Included 0.00 0 0 0.00 0

1.0 400kV Potential Transformer (Single Phase) 85359090 18 No. 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

2.0 Surge Arrester (Gapless-336kV) (1-phase) 85353090 18 Nos. 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

3.0 420kV, 3000A/3150, 63kA, Single phase, SF6 Gas Insulated Bus Duct (GIB) outsideGIS Hall along with associated support structure 85389000 18 Mtr. 60 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4.0 420kV, SF6 to Air Bushing alongwithassociated support structure for 3150A,63 kA for 1 sec. Single Phase 85389000 18 Nos. 4 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

4.1 420kV, 3150 A, 63 kA, SF6 GIS Auxiliary Bus module Extension for Spare ICT connection (For 400kV side of 765/400kV ICT) as per Section-Project, Technical specification 85359030 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

5.0 Substation automation system Included 0.00 0 0 0.00 0

5.1 Interfacing of Relays with SAS as per TS 85371000 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

6.0 Controlled switching device for 420kV, 3-Ph Circuit Breaker 85389000 18 Nos. 2 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

7.0 Structure Included 0.00 0 0 0.00 0

a Fabrication, galvanising and supply of Lattice Structures (MS Steel), to be designed during detailed engineering, for towers, beams and equipment support structure including pack plates/ packwashers and gusset plates excluding fastners and foundation bolts. 73045930 18 MT 38 Included 0.00 0 0 0.00 0

b Fabrication, galvanising and supply of fastners (nuts, bolts and washers), including step bolts for lattice and pipe structures to be designed during detailed engineering 73045930 18 MT 2 Included 0.00 0 0 0.00 0

c Fabrication, galvanising and supply of foundtion bolts including nuts, check nut and wshers for lattice and pipe structures to be designed during detailed engineering 73045930 18 MT 3 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

8.0 Electrical auxiliaries supply systems (from existing ICT Tertiary) Included 0.00 0 0 0.00 0

8.1 Auxiliary Service transformer 33 kV / 433 V; XXX kVA 85042100 18 Nos. 1 Included 0.00 0 0 0.00 0

8.2 66kV Circuit breaker (3-Phase) including support structure 85352113 18 Nos. 1 Included 0.00 0 0 0.00 0

8.3 66kV Isolator without earth switch (3-phase) 85359090 18 Nos. 1 Included 0.00 0 0 0.00 0

8.4 66kV Current transformer (1-phase) 85359090 18 Nos. 3 Included 0.00 0 0 0.00 0

8.5 66kV Potential transformer (1-phase) 85359090 18 Nos. 3 Included 0.00 0 0 0.00 0

8.7 Erection hardware (Al tube, clamps, spacers, connectors, earthing material risers, auxiliary earthmat, buried cable trenches/pipes, BPIs all accessories etc for extension of 52kV teritary bus of 765/400/33kV autotransformer) 72169990 18 Set 1 Included 0.00 0 0 0.00 0

Included 0.00 0 0 0.00 0

9.0 PMU Included 0.00 0 0 0.00 0

9.1 PMU with GPS Clock (clock can be either internal or external) 85371000 18 EA 1 Included 0.00 0 0 0.00 0

9.2 WAMS Hardware - Time System (GPS receiver) 85371000 18 EA 1 Included 0.00 0 0 0.00 0

9.3 SUBSTATION GRADE LAYER 2 LAN SWITCH 85371000 18 EA 1 Included 0.00 0 0 0.00 0

9.4 SUBSTATION GRADE LAYER 3 LAN SWITCH 85371000 18 EA 1 Included 0.00 0 0 0.00 0

9.5 WAMS Miscellaneous - Armored Fibre Optic Cable and associated termination (e.g. L2 Switch) for connecting PMU panels located 85371000 18 EA 1 Included 0.00 0 0 0.00 0

9.6 LIU - FO PATCH PANEL-12 PORT 85371000 18 EA 2

Total Ex-works Price 0.00 0 0.00

Total Type Test charges as per Schedule-7 0.00

Total Ex-works Price including Type Test charges 0.00

Total GST Tax as confirmed by Bidder 0.00

Note : Specify amount of GST on the transaction between the Contractor and the Employer.

* In case the bidder leaves the cell for confirmation of the HSN code and/or GST rate “blank”, the HSN code and corresponding GST rate indicated by the Employer shall be deemed to be the one confirmed by the Bidder.

Place : Printed Name :

Specification No: CC/T/W-STAT/DOM/A06/24/14931 Schedule - 2

STATCOM Package - ST-01T for (a) STATCOM Station at Khavda Pooling Station 1 (KPS1) and (b) STATCOM Station at Khavda Pooling Station 3 (KPS3) associated with “Provision of Dynamic Reactive Compensation at Khavda Pooling Station 1 (KPS1) and Khavda Pooling Station 3 (KPS3)"

(SCHEDULE OF RATES AND PRICES)

Bidder’s Name and Address (Sole Bidder) : To:

Contracts Services, 3rd Floor

Name : Power Grid Corporation of India Ltd.,

Address : "Saudamini", Plot No.-2

Gurugram (Haryana) - 122001

Local Transportation, In-transit insurance, loading and unloading

All Prices are in Indian Rupees.

SI. No. Item Description Unit Quantity Unit Freight, In-transit Insurance, loading & unloading Charges Total Freight, In-transit Insurance, loading & unloading Charges

# BIDDERS MUST QUOTE ONLY IN 01 (ONE) OUT OF THE 5 (FIVE) STATCOM OPTIONS GIVEN BELOW. BIDDERS SHALL NOT QUOTE IN MORE THAN 01 (ONE) OPTION. ACCORDINGLY, BIDDER SHALL QUOTE FOR THE SAME OPTION IN SCHEDULE 2 AND 3.

I STATCOM at 400kV Bus Section-I of 765/400kV KPS-1 S/S

Part-A MAIN ITEMS (As per Technical Specification) (VENDOR ASSESED QUANTITIES)

1# STATCOM STATION as per Option 1 of clause 2.1 of Section Project Technical Specification

1.1 STATCOM( ±300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories

1.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

1.1.2 Series reactor for STATCOM Unit Lot 1 Included

1.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

1.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

1.1.5 Charging Resistor Lot 1 Included

1.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

1.1.7 Bus work for STATCOM Unit Lot 1 Included

1.1.8 Wall Bushings Lot 1 Included

1.1.9 Other misc. item , accessories etc. Lot 1 Included

1.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

1.2.1 Air Core Reactor Set 2 Included

1.2.2 MV Switchgear Set 2 Included

1.2.3 Instrument Transformers Set 2 Included

1.2.4 Bus work for MSR Set 2 Included

1.3 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included

1.3.1 Capacitor Bank Set 1 Included

1.3.2 Series Air core reactor Set 1 Included

1.3.3 MV Switchgear Set 1 Included

1.3.4 Instrument Transformers Set 1 Included

1.3.5 Bus work for MSC Set 1 Included

2# STATCOM STATION as per Option 2 of clause 2.1 of Section Project Technical Specification Included

2.1 STATCOM( +425/-300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

2.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

2.1.2 Series reactor for STATCOM Unit Lot 1 Included

2.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

2.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

2.1.5 Charging Resistor Lot 1 Included

2.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

2.1.7 Bus work for STATCOM Unit Lot 1 Included

2.1.8 Wall Bushings Lot 1 Included

2.1.9 Other misc. item , accessories etc. Lot 1 Included

2.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

2.2.1 Air Core Reactor Set 2 Included

2.2.2 MV Switchgear Set 2 Included

2.2.3 Instrument Transformers Set 2 Included

2.2.4 Bus work for MSR Set 2 Included

3# STATCOM STATION as per Option 3 of clause 2.1 of Section Project Technical Specification Included

3.1 STATCOM( +300/-425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

3.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

3.1.2 Series reactor for STATCOM Unit Lot 1 Included

3.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

3.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

3.1.5 Charging Resistor Lot 1 Included

3.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

3.1.7 Bus work for STATCOM Unit Lot 1 Included

3.1.8 Wall Bushings Lot 1 Included

3.1.9 Other misc. item , accessories etc. Lot 1 Included

3.2 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included

3.2.1 Capacitor Bank Set 1 Included

3.2.2 Series Air core reactor Set 1 Included

3.2.3 MV Switchgear Set 1 Included

3.2.4 Instrument Transformers Set 1 Included

3.2.5 Bus work for MSC Set 1 Included

3.3 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

3.3.1 Air Core Reactor Set 1 Included

3.3.2 MV Switchgear Set 1 Included

3.3.3 Instrument Transformers Set 1 Included

3.3.4 Bus work for MSR Set 1 Included

4# STATCOM STATION as per Option 4 of clause 2.1 of Section Project Technical Specification Included

4.1 STATCOM( ±425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

4.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

4.1.2 Series reactor for STATCOM Unit Lot 1 Included

4.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

4.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

4.1.5 Charging Resistor Lot 1 Included

4.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

4.1.7 Bus work for STATCOM Unit Lot 1 Included

4.1.8 Wall Bushings Lot 1 Included

4.1.9 Other misc. item , accessories etc. Lot 1 Included

4.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

4.2.1 Air Core Reactor Set 1 Included

4.2.2 MV Switchgear Set 1 Included

4.2.3 Instrument Transformers Set 1 Included

4.2.4 Bus work for MSR Set 1 Included

5# STATCOM STATION as per Option 5 of clause 2.1 of Section Project Technical Specification Included

5.1 STATCOM( +425/-550 MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

5.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

5.1.2 Series reactor for STATCOM Unit Lot 1 Included

5.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

5.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

5.1.5 Charging Resistor Lot 1 Included

5.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

5.1.7 Bus work for STATCOM Unit Lot 1 Included

5.1.8 Wall Bushings Lot 1 Included

5.1.9 Other misc. item , accessories etc. Lot 1 Included

6.0 STATCOM Valve cooling system Included

6.1 Cooling system pump skid (with UMD) Lot 1 Included

6.2 Water to air Heat Exchanger Lot 1 Included

6.3 Cooling system pipes, valves etc. Lot 1 Included

7.0 Coupling Transformer Bank Included

7.1 Coupling Transformer Single phase unit Set 4 Included

7.2 Insulating oil for above Set 4 Included

8.0 STATCOM STATION Control, Protection, Monitoring & Automation system (As per Specification) Lot 1 Included

9.0 Bus work Included

9.1 MV Bus work Including Neutral Grounding Transformer (if applicable), Surge Capacitor, Swithgear, Post Insulators, Bus Bar Material, Clamps ,Connectors, Earthing Material etc including all accessories. Lot 1 Included

10.0 Erection hardware items & other miscellaneous item for STATCOM Station installation (if not covered under any head) Lot 1 Included

11.0 Lattice & pipe structures for STATCOM Station installations including pack plates/ packwashers and gusset plates, fasteners and foundation bolts. Included

11.1 Lattice Strctures Lot 1 Included

11.2 Pipe Structures Lot 1 Included

13.0 Erection Hardware (400 kV Switchyard upto SF6 to Air Bushing) Included

13.1 Insulator strings, Disc Insulators, Hardware, Spacers, conductor(s), bus-bar material, cable trays, Bay MB, clamps, connectors including equipment connectors, junction box, earthwire, earthing material,insulating mat, risers, auxiliary earthmat (excluding main earthmat), pipes for equipment & lighting, all accessories etc. for the following Included

Layout Type (400kV I-type) Included

i) Coupling Transformer bay Set 1 Included

13.2 Bus Post Insulator including support structures Nos. 4 Included

14.0 Illumination system Included

14.1 Illumination for STATCOM Station installation Lot 1 Included

14.2 Illumination for STATCOM Station buildings Lot 1 Included

14.3 Illumination system for 400kV switchyard extension area Lot 1 Included

14.4 Illumination system for 400kV GIS Hall Extension Lot 1 Included

15.0 Electrical station services & auxiliaries systems Included

15.1 415V Main switchboard Set 1 Included

15.2 415V AC distribution board Set 1 Included

15.3 220V DC distribution board Set 2 Included

15.4 220V Battery system Set 2 Included

15.5 220V Battery charger Set 2 Included

15.8 UPS/UMD for STATCOM Station systems Set 1 Included

15.9 Auxiliary supply system as per technical specification Set 1 Included

15.10 Erection hardware items, Bus post insulators, clamps and Connectors, Structures & other miscellaneous item for LT transformer(s) installation Set 1 Included

15.11 DG Set Set 1 Included

16.0 LT Cabling along with associated like clamps, glands, lugs and straight joints etc. Included

a) 1.1kV Grade Power Cables (PVC/XLPE insulated ) Set 1 Included

b) 1.1kV Grade Control Cable (PVC insulated) Set 1 Included

17.0 40 mm MS rod for Earth mat LS 1 Included

18.0 Mechanical station services & auxiliaries systems Included

18.1 Fire protection system Included

a) Fire protection system (HVW spray & Hydrant system) for Coupling transformers Lot 1 Included

b) Hydrant system for STATCOM Station including buildings Lot 1 Included

c) Smoke detection system for STATCOM building Lot 1 Included

d) Smoke detection system for GIS Hall EXTENSION Lot 1 Included

18.2 Air conditioning & ventilation system Included

a) Air conditioning & ventilation system for STATCOM Station Buildings Lot 1 Included

b) Air conditioning for LCR Room in GIS Hall extesnion Lot 1 Included

c) ventilation system for GIS HALL Extesnion Lot 1 Included

18.3 Castle Key Interlock System for STATCOM Station as per Tech Spec. Lot 1 Included

19.0 VMS for STATCOM Station & GIS Hall Extension Lot 1 Included

# Marked Quantities Bidders must fill only 1 of the 5 options. Bidders shall not fill more than 1 option. Included

Part-B MAIN 400kV Switchyard Equipments/ systems (POWERGRID ASSESED QUANTITIES) Included

1.0 400kV Potential Transformer (Single Phase) No. 4 Included

2.0 Surge Arrester (Gapless-336kV) (1-phase) Nos. 4 Included

3.0 420kV, 3000A/3150, 63kA, Single phase, SF6 Gas Insulated Bus Duct (GIB) outsideGIS Hall along with associated support structure Mtr. 400 Included

4.0 420kV, SF6 to Air Bushing along with associated support structure for 3150A,63 kA for 1 sec. Single Phase Nos. 4 Included

5.0 420kV, 3150 A, 63 kA, SF6 GIS ICT bay module(For 400kV side of 765/400kV ICT) as per Section-Project, Technical specification Set 2 Included

6.0 420kV, 3150 A, 63 kA, SF6 GIS Tie bay module(without PIR) as per Section-Project, Technical specification Set 1 Included

7.0 420kV, 3150 A, 63 kA, SF6 GIS Auxiliary Bus module Extension for Spare ICT connection (For 400kV side of 765/400kV ICT) as per Section-Project, Technical specification Set 1 Included

8.0 Control & Relay Panels Included

8.1 Circuit Breaker Relay Panel Included

a) With Auto Reclose Nos. 3 Included

b) Augmentation of existing Bus bar protection scheme for complete diameter Set 1 Included

9.0 Substation automation system Included

9.1 Augmentation of existing Substation automation system for the STATCOM Station and associated 3 no. 400kV bays under present scope , upgradation of hardware and sofware and updation of dabase etc for completion of SAS augmentationas per technical specification Set 1 Included

10.0 Controlled switching device for 420kV, 3-Ph Circuit Breaker No. 3 Included

11.0 Structure Included

11.1 Fabrication, galvanising and supply of Lattice Structures (MS Steel), to be designed during detailed engineering, for towers, beams and equipment support structure including pack plates/ packwashers and gusset plates excluding fastners and foundation bolts. MT 38 Included

11.2 Fabrication, galvanising and supply of fastners (nuts, bolts and washers), including step bolts for lattice and pipe structures to be designed during detailed engineering MT 2 Included

11.3 Fabrication, galvanising and supply of foundtion bolts including nuts, check nut and wshers for lattice and pipe structures to be designed during detailed engineering MT 3 Included

12.0 Electrical auxiliaries supply systems (from existing ICT Tertiary) Included

12.1 Auxiliary Service transformer 33 kV / 433 V; XX kVA Nos. 1 Included

12.2 66kV Circuit breaker (3-Phase) including support structure Nos. 1 Included

12.3 66kV Isolator without earth switch (3-phase) Nos. 1 Included

12.4 66kV Current transformer (1-phase) Nos. 3 Included

12.5 66kV Potential transformer (1-phase) Nos. 3 Included

12.6 72.5kV BPI Nos. 9 Included

12.7 Erection hardware (Al tube, clamps, spacers, connectors, earthing material risers, auxiliary earthmat, buried cable trenches/pipes, BPIs all accessories etc for extension of 52kV teritary bus of 765/400/33kV autotransformer) Set 1 Included

13.0 PMU Included

13.1 PMU with GPS Clock (clock can be either internal or external) EA 1 Included

13.2 WAMS Hardware - Time System (GPS receiver) EA 1 Included

13.3 SUBSTATION GRADE LAYER 2 LAN SWITCH EA 1 Included

13.4 SUBSTATION GRADE LAYER 3 LAN SWITCH EA 1 Included

13.5 WAMS Miscellaneous - Armored Fibre Optic Cable and associated termination (e.g. L2 Switch) for connecting PMU panels located EA 1 Included

13.6 LIU - FO PATCH PANEL-12 PORT EA 2 Included

# Marked Quantities Bidders must fill only 1 of the 5 options. Bidders shall not fill more than 1 option. Included

II STATCOM at 400kV Bus Section-II of 765/400kV KPS-1 S/S Included

Part-A MAIN ITEMS (As per Technical Specification) (VENDOR ASSESED QUANTITIES) Included

1# STATCOM STATION as per Option 1 of clause 2.1 of Section Project Technical Specification Included

1.1 STATCOM( ±300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

1.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

1.1.2 Series reactor for STATCOM Unit Lot 1 Included

1.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

1.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

1.1.5 Charging Resistor Lot 1 Included

1.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

1.1.7 Bus work for STATCOM Unit Lot 1 Included

1.1.8 Wall Bushings Lot 1 Included

1.1.9 Other misc. item , accessories etc. Lot 1 Included

1.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

1.2.1 Air Core Reactor Set 2 Included

1.2.2 MV Switchgear Set 2 Included

1.2.3 Instrument Transformers Set 2 Included

1.2.4 Bus work for MSR Set 2 Included

1.3 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included

1.3.1 Capacitor Bank Set 1 Included

1.3.2 Series Air core reactor Set 1 Included

1.3.3 MV Switchgear Set 1 Included

1.3.4 Instrument Transformers Set 1 Included

1.3.5 Bus work for MSC Set 1 Included

2# STATCOM STATION as per Option 2 of clause 2.1 of Section Project Technical Specification Included

2.1 STATCOM( +425/-300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

2.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

2.1.2 Series reactor for STATCOM Unit Lot 1 Included

2.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

2.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

2.1.5 Charging Resistor Lot 1 Included

2.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

2.1.7 Bus work for STATCOM Unit Lot 1 Included

2.1.8 Wall Bushings Lot 1 Included

2.1.9 Other misc. item , accessories etc. Lot 1 Included

2.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

2.2.1 Air Core Reactor Set 2 Included

2.2.2 MV Switchgear Set 2 Included

2.2.3 Instrument Transformers Set 2 Included

2.2.4 Bus work for MSR Set 2 Included

3# STATCOM STATION as per Option 3 of clause 2.1 of Section Project Technical Specification Included

3.1 STATCOM( +300/-425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

3.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

3.1.2 Series reactor for STATCOM Unit Lot 1 Included

3.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

3.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

3.1.5 Charging Resistor Lot 1 Included

3.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

3.1.7 Bus work for STATCOM Unit Lot 1 Included

3.1.8 Wall Bushings Lot 1 Included

3.1.9 Other misc. item , accessories etc. Lot 1 Included

3.2 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included

3.2.1 Capacitor Bank Set 1 Included

3.2.2 Series Air core reactor Set 1 Included

3.2.3 MV Switchgear Set 1 Included

3.2.4 Instrument Transformers Set 1 Included

3.2.5 Bus work for MSC Set 1 Included

3.3 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

3.3.1 Air Core Reactor Set 1 Included

3.3.2 MV Switchgear Set 1 Included

3.3.3 Instrument Transformers Set 1 Included

3.3.4 Bus work for MSR Set 1 Included

4# STATCOM STATION as per Option 4 of clause 2.1 of Section Project Technical Specification Included

4.1 STATCOM( ±425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

4.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

4.1.2 Series reactor for STATCOM Unit Lot 1 Included

4.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

4.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

4.1.5 Charging Resistor Lot 1 Included

4.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

4.1.7 Bus work for STATCOM Unit Lot 1 Included

4.1.8 Wall Bushings Lot 1 Included

4.1.9 Other misc. item , accessories etc. Lot 1 Included

4.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

4.2.1 Air Core Reactor Set 1 Included

4.2.2 MV Switchgear Set 1 Included

4.2.3 Instrument Transformers Set 1 Included

4.2.4 Bus work for MSR Set 1 Included

5# STATCOM STATION as per Option 5 of clause 2.1 of Section Project Technical Specification Included

5.1 STATCOM( +425/-550 MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

5.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

5.1.2 Series reactor for STATCOM Unit Lot 1 Included

5.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

5.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

5.1.5 Charging Resistor Lot 1 Included

5.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

5.1.7 Bus work for STATCOM Unit Lot 1 Included

5.1.8 Wall Bushings Lot 1 Included

5.1.9 Other misc. item , accessories etc. Lot 1 Included

6.0 STATCOM Valve cooling system Included

6.1 Cooling system pump skid (with UMD) Lot 1 Included

6.2 Water to air Heat Exchanger Lot 1 Included

6.3 Cooling system pipes, valves etc. Lot 1 Included

7.0 Coupling Transformer Bank Included

7.1 Coupling Transformer Single phase unit Set 3 Included

7.2 Insulating oil for above Set 3 Included

8.0 STATCOM STATION Control, Protection, Monitoring & Automation system (As per Specification) Lot 1 Included

9.0 Bus work Included

9.1 MV Bus work Including Neutral Grounding Transformer (if applicable), Surge Capacitor, Swithgear, Post Insulators, Bus Bar Material, Clamps ,Connectors, Earthing Material etc including all accessories. Lot 1 Included

10.0 Erection hardware items & other miscellaneous item for STATCOM Station installation (if not covered under any head) Lot 1 Included

11.0 Lattice & pipe structures for STATCOM Station installations including pack plates/ packwashers and gusset plates, fasteners and foundation bolts. Included

11.1 Lattice Strctures Lot 1 Included

11.2 Pipe Structures Lot 1 Included

12.0 Erection Hardware (400 kV Switchyard upto SF6 to Air Bushing) Included

12.1 Insulator strings, Disc Insulators, Hardware, Spacers, conductor(s), bus-bar material, cable trays, Bay MB, clamps, connectors including equipment connectors, junction box, earthwire, earthing material,insulating mat, risers, auxiliary earthmat (excluding main earthmat), pipes for equipment & lighting, all accessories etc. for the following Included

Layout Type (400kV I-type) Included

i) Coupling Transformer bay Set 1 Included

12.2 Bus Post Insulator including support structures Nos. 3 Included

13.0 Illumination system Included

13.1 Illumination for STATCOM Station installation Lot 1 Included

13.2 Illumination for STATCOM Station buildings Lot 1 Included

13.3 Illumination system for 400kV switchyard extension area Lot 1 Included

13.4 Illumination system for 400kV GIS Hall Extension Lot 1 Included

14.0 LT Cabling along with associated like clamps, glands, lugs and straight joints etc. Included

a) 1.1kV Grade Power Cables (PVC/XLPE insulated ) Set 1 Included

b) 1.1kV Grade Control Cable (PVC insulated) Set 1 Included

15.0 40 mm MS rod for Earth mat LS 1 Included

16.0 Mechanical station services & auxiliaries systems Included

16.1 Fire protection system Included

a) Fire protection system (HVW spray & Hydrant system) for Coupling transformers Lot 1 Included

b) Hydrant system for STATCOM Station including buildings Lot 1 Included

c) Smoke detection system for STATCOM building Lot 1 Included

d) Smoke detection system for GIS Hall EXTENSION Lot 1 Included

16.2 Air conditioning & ventilation system Included

a) Air conditioning & ventilation system for STATCOM Station Buildings Lot 1 Included

b) Air conditioning for LCR Room in GIS Hall extesnion Lot 1 Included

c) ventilation system for GIS HALL Extesnion Lot 1 Included

16.3 Castle Key Interlock System for STATCOM Station as per Tech Spec. Lot 1 Included

17.0 VMS for STATCOM Station & GIS Hall Extension Lot 1 Included

# Marked Quantities Bidders must fill only 1 of the 5 options. Bidders shall not fill more than 1 option. Included

Part-B MAIN 400kV Switchyard Equipments/ systems (POWERGRID ASSESED QUANTITIES) Included

1.0 400kV Potential Transformer (Single Phase) No. 3 Included

2.0 Surge Arrester (Gapless-336kV) (1-phase) Nos. 3 Included

3.0 420kV, 3000A/3150, 63kA, Single phase, SF6 Gas Insulated Bus Duct (GIB) outsideGIS Hall along with associated support structure Mtr. 400 Included

4.0 420kV, SF6 to Air Bushing along with associated support structure for 3150A,63 kA for 1 sec. Single Phase Nos. 4 Included

5.0 420kV, 3150 A, 63 kA, SF6 GIS ICT bay module(For 400kV side of 765/400kV ICT) as per Section-Project, Technical specification Set 2 Included

6.0 420kV, 3150 A, 63 kA, SF6 GIS Tie bay module(without PIR) as per Section-Project, Technical specification Set 1 Included

7.0 420kV, 3150 A, 63 kA, SF6 GIS Auxiliary Bus module Extension for Spare ICT connection (For 400kV side of 765/400kV ICT) as per Section-Project, Technical specification Set 1 Included

8.0 Control & Relay Panels Included

8.1 Circuit Breaker Relay Panel Included

a) With Auto Reclose Nos. 3 Included

b) Augmentation of existing Bus bar protection scheme for complete diameter Set 1 Included

9.0 Substation automation system Included

9.1 Augmentation of existing Substation automation system for the STATCOM Station and associated 3 no. 400kV bays under present scope , upgradation of hardware and sofware and updation of dabase etc for completion of SAS augmentationas per technical specification Set 1 Included

10.0 Controlled switching device for 420kV, 3-Ph Circuit Breaker No. 3 Included

11.0 Structure Included

11.1 Fabrication, galvanising and supply of Lattice Structures (MS Steel), to be designed during detailed engineering, for towers, beams and equipment support structure including pack plates/ packwashers and gusset plates excluding fastners and foundation bolts. MT 34 Included

11.2 Fabrication, galvanising and supply of fastners (nuts, bolts and washers), including step bolts for lattice and pipe structures to be designed during detailed engineering MT 1 Included

11.3 Fabrication, galvanising and supply of foundtion bolts including nuts, check nut and wshers for lattice and pipe structures to be designed during detailed engineering MT 3 Included

12.0 PMU Included

12.1 PMU with GPS Clock (clock can be either internal or external) EA 1 Included

12.2 WAMS Hardware - Time System (GPS receiver) EA 1 Included

12.3 SUBSTATION GRADE LAYER 2 LAN SWITCH EA 1 Included

12.4 SUBSTATION GRADE LAYER 3 LAN SWITCH EA 1 Included

12.5 WAMS Miscellaneous - Armored Fibre Optic Cable and associated termination (e.g. L2 Switch) for connecting PMU panels located EA 1 Included

12.6 LIU - FO PATCH PANEL-12 PORT EA 2 Included

# BIDDERS MUST QUOTE ONLY IN 01 (ONE) OUT OF THE 5 (FIVE) STATCOM OPTIONS GIVEN BELOW. BIDDERS SHALL NOT QUOTE IN MORE THAN 01 (ONE) OPTION. ACCORDINGLY, BIDDER SHALL QUOTE FOR THE SAME OPTION IN SCHEDULE 2 AND 3. Included

III STATCOM at 400kV Bus Section-I of 765/400kV KPS-3 S/S Included

Part-A MAIN ITEMS (As per Technical Specification) (VENDOR ASSESED QUANTITIES) Included

1# STATCOM STATION as per Option 1 of clause 2.1 of Section Project Technical Specification Included

1.1 STATCOM( ±300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

1.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

1.1.2 Series reactor for STATCOM Unit Lot 1 Included

1.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

1.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

1.1.5 Charging Resistor Lot 1 Included

1.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

1.1.7 Bus work for STATCOM Unit Lot 1 Included

1.1.8 Wall Bushings Lot 1 Included

1.1.9 Other misc. item , accessories etc. Lot 1 Included

1.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

1.2.1 Air Core Reactor Set 2 Included

1.2.2 MV Switchgear Set 2 Included

1.2.3 Instrument Transformers Set 2 Included

1.2.4 Bus work for MSR Set 2 Included

1.3 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included

1.3.1 Capacitor Bank Set 1 Included

1.3.2 Series Air core reactor Set 1 Included

1.3.3 MV Switchgear Set 1 Included

1.3.4 Instrument Transformers Set 1 Included

1.3.5 Bus work for MSC Set 1 Included

2# STATCOM STATION as per Option 2 of clause 2.1 of Section Project Technical Specification Included

2.1 STATCOM( +425/-300MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

2.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

2.1.2 Series reactor for STATCOM Unit Lot 1 Included

2.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

2.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

2.1.5 Charging Resistor Lot 1 Included

2.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

2.1.7 Bus work for STATCOM Unit Lot 1 Included

2.1.8 Wall Bushings Lot 1 Included

2.1.9 Other misc. item , accessories etc. Lot 1 Included

2.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

2.2.1 Air Core Reactor Set 2 Included

2.2.2 MV Switchgear Set 2 Included

2.2.3 Instrument Transformers Set 2 Included

2.2.4 Bus work for MSR Set 2 Included

3# STATCOM STATION as per Option 3 of clause 2.1 of Section Project Technical Specification Included

3.1 STATCOM( +300/-425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

3.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

3.1.2 Series reactor for STATCOM Unit Lot 1 Included

3.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

3.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

3.1.5 Charging Resistor Lot 1 Included

3.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

3.1.7 Bus work for STATCOM Unit Lot 1 Included

3.1.8 Wall Bushings Lot 1 Included

3.1.9 Other misc. item , accessories etc. Lot 1 Included

3.2 Mechanically switched Capacitor bank(3-ph) (125MVAR as per Technical Specification) including all accessories (MSC Branches) (As per Technical Specification) Included

3.2.1 Capacitor Bank Set 1 Included

3.2.2 Series Air core reactor Set 1 Included

3.2.3 MV Switchgear Set 1 Included

3.2.4 Instrument Transformers Set 1 Included

3.2.5 Bus work for MSC Set 1 Included

3.3 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

3.3.1 Air Core Reactor Set 1 Included

3.3.2 MV Switchgear Set 1 Included

3.3.3 Instrument Transformers Set 1 Included

3.3.4 Bus work for MSR Set 1 Included

4# STATCOM STATION as per Option 4 of clause 2.1 of Section Project Technical Specification Included

4.1 STATCOM( ±425MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

4.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

4.1.2 Series reactor for STATCOM Unit Lot 1 Included

4.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

4.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

4.1.5 Charging Resistor Lot 1 Included

4.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

4.1.7 Bus work for STATCOM Unit Lot 1 Included

4.1.8 Wall Bushings Lot 1 Included

4.1.9 Other misc. item , accessories etc. Lot 1 Included

4.2 Mechanically switched Reactor bank (3-ph) (-125MVAR as per Technical Specification) including all accessories (MSR Branches) (As per Technical Specification) Included

4.2.1 Air Core Reactor Set 1 Included

4.2.2 MV Switchgear Set 1 Included

4.2.3 Instrument Transformers Set 1 Included

4.2.4 Bus work for MSR Set 1 Included

5# STATCOM STATION as per Option 5 of clause 2.1 of Section Project Technical Specification Included

5.1 STATCOM( +425/-550 MVAR as per Technical Specification) including Valve, valve base electronics, DC capacitor, series reactor and all accessories Included

5.1.1 Valve complete with all accessories for STATCOM Unit Lot 1 Included

5.1.2 Series reactor for STATCOM Unit Lot 1 Included

5.1.3 MV Switchgear for STATCOM Unit Lot 1 Included

5.1.4 MV Switchgear for STATCOM Unit including bypass switch Lot 1 Included

5.1.5 Charging Resistor Lot 1 Included

5.1.6 Instrument Transformers for STATCOM Unit Lot 1 Included

5.1.7 Bus work for STATCOM Unit Lot 1 Included

5.1.8 Wall Bushings Lot 1 Included

5.1.9 Other misc. item , accessories etc. Lot 1 Included

6.0 STATCOM Valve cooling system Included

6.1 Cooling system pump skid (with UMD) Lot 1 Included

6.2 Water to air Heat Exchanger Lot 1 Included

6.3 Cooling system pipes, valves etc. Lot 1 Included

7.0 Coupling Transformer Bank Included

7.1 Coupling Transformer Single phase unit Set 4 Included

7.2 Insulating oil for above Set 4 Included

8.0 STATCOM STATION Control, Protection, Monitoring & Automation system (As per Specification) Lot 1 Included

9.0 Bus work Included

9.1 MV Bus work Including Neutral Grounding Transformer (if applicable), Surge Capacitor, Swithgear, Post Insulators, Bus Bar Material, Clamps ,Connectors, Earthing Material etc including all accessories. Lot 1 Included

10.0 Erection hardware items & other miscellaneous item for STATCOM Station installation (if not covered under any head) Lot 1 Included

11.0 Lattice & pipe structures for STATCOM Station installations including pack plates/ packwashers and gusset plates, fasteners and foundation bolts. Included

11.1 Lattice Strctures Lot 1 Included

11.2 Pipe Structures Lot 1 Included

12.0 Special Tools and Tackles as per Technical Specification (excluding those covered T&P listed in Section-Project of TS) Included

i Custom Tansport Trolley for STATCOM Power Module Set 1 Included

ii Secisor Lift Set 1 Included

13.0 Special Tools and Tackles as per Technical Specification section project Annexure-III Included

i Clip on meter Set 1 Included

ii Thermovision Camera Set 1 Included

iii Capacitance bridge For detecting faulty capacitor units Set 1 Included

iv Micro Ohm Meter for contact resistance measurement Set 1 Included

v Battery Operated 5 KV Insulation Tester Set 1 Included

vi Phase sequence meter Set 1 Included

vii Transformer Winding Resistance Testing Kit Set 1 Included

viii Digital Oscilloscope Set 1 Included

ix Capacitance Inductance and resistance meter Set 1 Included

x Automatic Relay testing unit Set 1 Included

xi Frequency Counter Set 1 Included

xii HARMONIC ANALYSER Set 1 Included

xiii Variac (single phase & three phase) power supply Set 1 Included

xiv Digital Multimeter Set 1 Included

xv Function generator Set 1 Included

xvi CT secondary winding magnetization kit Set 1 Included

xvii Impendence Analyser Set 1 Included

xviii Phase angle meter Set 1 Included

xix Vibration cum noise level meter Set 1 Included

xx Portable Earthing kit Set 1 Included

xxi Earth fault locator for floating dc system. Set 1 Included

xxii Precision Multi-meter Set 1 Included

xxiii Automatic Third Harmonic Resistance Measurement Kit for Gapless Surge Arrestor (LCM Kit) Set 1 Included

xxiv Test Equipment for Semiconductor power module Set 1 Included

xxv Toolkit to replace the Power module of STATCOM Valve Set 1 Included

xxvi Instrument for measuring ground resistance and soil resistivity. Set 1 Included

14.0 Erection Hardware (400 kV Switchyard upto SF6 to Air Bushing) Included

14.1 Insulator strings, Disc Insulators, Hardware, Spacers, conductor(s), bus-bar material, cable trays, Bay MB, clamps, connectors including equipment connectors, junction box, earthwire, earthing material,insulating mat, risers, auxiliary earthmat (excluding main earthmat), pipes for equipment & lighting, all accessories etc. for the following Included

Layout Type (400kV I-type) Included

i) Coupling Transformer bay Set 1 Included

14.2 Bus Post Insulator including support structures Nos. 4 Included

15.0 Illumination system Included

15.1 Illumination for STATCOM Station installation Lot 1 Included

15.2 Illumination for STATCOM Station buildings Lot 1 Included

15.3 Illumination system for 400kV switchyard extension area Lot 1 Included

16.0 Electrical station services & auxiliaries systems Included

16.1 415V Main switchboard Set 1 Included

16.2 415V AC distribution board Set 1 Included

16.3 220V DC distribution board Set 2 Included

16.4 220V Battery system Set 2 Included

16.5 220V Battery charger Set 2 Included

16.8 UPS/UMD for STATCOM Station systems Set 1 Included

16.9 Auxiliary supply system as per technical specification Set 1 Included

16.10 Erection hardware items, Bus post insulators, clamps and Connectors, Structures & other miscellaneous item for LT transformer(s) installation Set 1 Included

16.11 DG Set Set 1 Included

17.0 LT Cabling along with associated like clamps, glands, lugs and straight joints etc. Included

a) 1.1kV Grade Power Cables (PVC/XLPE insulated ) Set 1 Included

b) 1.1kV Grade Control Cable (PVC insulated) Set 1 Included

18.0 40 mm MS rod for Earth mat LS 1 Included

19.0 Mechanical station services & auxiliaries systems Included

19.1 Fire protection system Included

a) Fire protection system (HVW spray & Hydrant system) for Coupling transformers Lot 1 Included

b) Hydrant system for STATCOM Station including buildings Lot 1 Included

c) Smoke detection system for STATCOM building Lot 1 Included

19.2 Air conditioning & ventilation system Included

a) Air conditioning & ventilation system for STATCOM Station Buildings Lot 1 Included

19.3 Castle Key Interlock System for STATCOM Station as per Tech Spec. Lot 1 Included

20.0 VMS for STATCOM Station Lot 1 Included

21.0 Mandatory Spares for STATCOM & 400 kV Bay Equipment Included

I. STATCOM Valve based on Semiconductor based Power module Included

a) “Semiconductor based Power module (sub-module) of Multimodule valve (10% of total population of STATCOM Valves, subject to minimum 20nos) Set 1 Included

b) Gate control units of each type & rating Set 5 Included

c) Optical fiber signal cable to the power module ( each length & type) Set 1 Included

d) Insulators of each type and rating ( each length & type) Set 5 Included

e) Gaskets (Complete replacement for STATCOM Station) LS 1 Included

f) Epoxy bolts/nuts of each type (10% of each type) At least for replacement of 1-phase of STATCOM Branch LS 1 Included

II. Module for Control, Protection, Communication, Annunciation, Alarm, SCADA & Monitoring, Disturbance Recorder including Power Supply Module (of each type and function.) Set 1 Included

III. STATCOM Protection system Relays. Included

a) Protection Relay(IED)of each type Nos. 2 Included

b) Bay Control Unit(IED) of each type Nos. 2 Included

IV. 400 kV bay Protection system Spares. Included

a) Protection Relay(IED)of each type Nos. 1 Included

b) Bay Control Unit(IED) of each type Nos. 1 Included

V. STATCOM other equipments Included

a) Arrestor across Valve module (if applicable) Nos. 2 Included

b) Arrestor across Valve (if applicable) Nos. 2 Included

c) Grounding switch contact kit Set 1 Included

d) Support porcelain of each type Set 4 Included

e) Wall bushing of each type Set 1 Included

f) Bypass Resistor, if applicable Nos. 1 Included

g) Series Air core Reactor (no. of each type & rating) Set 1 Included

h) Control cards, fuses, Semiconductor module etc. for Uninterrupted Power Supply (UPS) Nos. 1 Included

VI. Coupling Transformer Included

a 420kV bushing with metal partsand Gaskets Set 1 Included

b MV bushing with metal parts and gaskets Set 1 Included

c Winding temp. indicator with contacts Nos. 1 Included

d Oil temp. indicator with contacts Nos. 1 Included

e Pressure relief device/safety valve Nos. 1 Included

f Magnetic oil level gauge Nos. 1 Included

g Bucholz relay Nos. 1 Included

h Set of gaskets Set 1 Included

i Set of valves Set 1 Included

j Set of pressure gauges Set 1 Included

k Set of pressure switches Set 1 Included

l Set of hydraulic jacks suitable for lifting coupling transformer. Set 1 Included

m Nitrogen sealing equipment Set 1 Included

n Set of magnetic contactor, switches, fuses relays for electric control panel Set 1 Included

o Insulating Oil Kl 10 Included

VII Filter Bank, If applicable Included

a) Capacitor cans (10% of Each type and rating subject to minimum 5 units) Set 1 Included

b) Resistor Element (if applicable)10 elements of each type and rating Set 1 Included

c) Reactors of each type and rating Set 1 Included

d) Arrestor of each type and rating Set 1 Included