S/I/T/C Pumping Set and other work for UGR in Sector-32 yea

Boosting Pumping plant Supply & Fixing of horizontal split casing centrifugal pump set with C.I. impeller coupled through a flexible tyre type coupling to sq.cage induction motor with 1440 rpm suitable for operation on 440volts, 3 phase ,50 hz A.C. supply, mounted on a common M.S. channel iron base plate including pdg foundation nut bolts, washers etc. Complete as per direction of E/I.The pump shall be suitable to perform the following duties:-(Make : KIRLOSKAR/A.B.B/C.G) Model:-UP150/38B Discharge :- 120LPS Head :-28 Mts. Liquid :- Clear Water Capacity :- 75 HP.

Supply and fixing of 75 H.P.fully Automatic Control Panel with star-delta starter for submersible pump sets / VT/Booster Pump set with following features No-volt, Under-voltage, Over -voltage protection,microprocessor based overload protection, Unbalancing protection ,winding tempreture controller ,seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter, and indicating lamps,Above panel is dust and vermin proof made out of 14 SWG CRC sheet with powder coating paint as per directions of E/I.

Supply/Erection/Testing/Commisioning of Cubical type LT panel Board made out of 14 S.W.G. CRCA sheet steel encloser floor mounted on M.S.chanel with suitable size of Al.bus bar following confrigration i/c complete connection etc.As per Drawing. i.) 1600 Amp. ACB-3 Nos. ii) 800 Amp. MCCB - 2 Nos. iii) 250 Amp. MCCB -8 Nos. iv) 100Amp. MCCB -6Nos.v) Indicating lamp with HRC fuse-1 Set. vi) 14 nosAmp.Meter,2 nos volt meter -2 nos C.T-150/5,250/5,800/5,1600/5 vii) 18 nos A.S.S & 2nos V.S.S.

Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI , Gloster , Asian , Universal , Nicco , ICL , Diamond, Havells & KEI make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga , Suraj, Delton, Grandly, Polycab & KEI make can be used) complete in all respect as per the directions of the Engineer-in-charge PWD-2018/PS No-501 150 sqmm 3-1/2 core

Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI , Gloster , Asian , Universal , Nicco , ICL , Diamond, Havells & KEI make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga , Suraj, Delton, Grandly, Polycab & KEI make can be used) complete in all respect as per the directions of the Engineer-in-charge PWD-2018/PS No-501 400 sqmm 3-1/2 core

Supply and fixing of Flat cable for starter to Motor 35 sqmm x 3 core

Supply & fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, making connections etc. complete in all respects as per direction of the Engineer-in-charge. PWD-2018/PS No-504 400 sq.mm

Supply & fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, making connections etc. complete in all respects as per direction of the Engineer-in-charge. PWD-2018/PS No-504 150 sq.mm

Supply & fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, making connections etc. complete in all respects as per direction of the Engineer-in-charge. PWD-2018/PS No-504 70 sq.mm

Supply & fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, making connections etc. complete in all respects as per direction of the Engineer-in-charge. PWD-2018/PS No-504 50 sq.mm