SPECIAL REPAIR TO BLDG NO T84 UNDER GE NARANGI

Amount

M&L surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.complete all as specified and directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes, laying of cable etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

M&L hardcore of gauge n exc. 63mm with broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed to true surface complete all as specified and directed.

M&L Soling ( or sub base) 150mm thick spread thickness with broken boulders or quarried stone, interstices fillled , surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregate) as in roof kerb and mud stop, rounded or chamfered on edges and similar work etc. complete all as specified and as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Slabs supported on walls beams and columns in floors,roofs,landings, balconies,canopies,deck slabs and in shelves and the like etc complete all as specified as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed.

M&L for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Columns, pillars, piers, posts and struts etc.complete all as specified as directed.

M/L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.

M/L formwork to sides and soffits of floor or roof beams, beams haunchings, girders, bressumers, lintels over 1.5m clear span, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc. for fair finished flat surfaces of concrete complete all as specified and as directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M/L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works, not exceeding 200mm thick ( Horizontal or sloping) complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cranking, bending spirally for hooping for columns,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia as in reinforcement bar complete all as specified and as directed.

M&L for mild steel TMT bars 6 mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F rolled mild steel plates ( plain or chequrred) channels, square cut or notched ( ordinary or counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified & as directed.

M&L for rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins when connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connected plates confirming to Fe-410 W ( Gde-E 250 ) quality B complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

Demolition of brick /stone massonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) including removal of spoils/ demolished materials not exceeding 50m and depositing complete all as specified and directed.

M & L 100mm thick PCC1:2:4 type B-2 ( 40mm graded aggregate) as in floor/ hardstanding/ path etc finishing the surface even & fair whtiout using extra cement complete all as specified and directed.

M&L for providing 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in plinth protection. Plinth protection shall be laid in alternate bays n exc 2 sqm, 10 mm thick joints shall be provided, joint shall be filled with bitumen mastic, bitumen mastic shall comprises of 1 part of hot bitumen 85/25 and 3 parts of sand all by weight finished cement concrete surface even and fair without using extra cement complete all as specified and as directed.

Dismantling of asbestos cement sheet (Corrugated semi corrugated etc) as in roof covering complete all as specified and directed.

S&F pre painted galvalume aluminum and zinc alloy coating with GI based corrugated steel sheet 0.50 mm thick of a colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre painted galvalume aluminum and zinc alloy coating with GI based plain steel sheet 0.50 mm thick of a colour having tensile strength of 550 Mpa as in ridges fixed with self tapping screws complete all as specified and directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 20mm thick plaster in two layers ( 15mm +5mm ) on brick or concrete surfaces in CM 1:4 with WPC on second layer of 5mm thick finished the surface even and smooth without using extra cement complete all as specified and directed ( supply only WPC shall be measured and paid seperately).

Supply only integral water proofing compound of appproved make.

M&L applying 3mm thick wall care putty on plastered surfaces of internal wall complete all as specified and directed.

M&L for preparation of new wall surface and applying two coats of acrylic exterior weather resistant paint (weather proof paint) of tint as approved over a coat of primer complete all as specified and as directed.

M&L for preparation of old wall surface and applying one coat of acrylic exterior weather resistant paint (weather proof paint) of tint as approved complete all as specified and as directed.

M&L for complete removal of old treated surfaces on walls and applying one coat of alkali resistant primer over a coat of wall care putty of 1mm average thickness and applying two coats of plastic paint etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators etc with one or more rebates including jointing cleats for fixing etccomplete all as specified and as directed.

S&F 35 mm thick flush shutter, solid core construction with particle board core and plywood face panel, commercial type on both side complete all as specified and directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2020.

S&F 1.25mm thick pressed steel frame of size 125x60mm for doors/windows with single rebates including necessary fixing lugs, hinges, lock strike plates, filling in PCC !:3:6 type C-0 in hollow portion etc. complete all as specified and directed.

S&F stainless steel butt hinges 75 mm long medium weight complete all as directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm in size extruded aluminium handles, fabricated type, anodised complete all as specified and directed.

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing rubbish off the premises complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block glossy finish coloured of approved design and pattern any shape and size confirming to IS 15658-2006 of 100mm thickness, M-50 grade including 25mm thick sand cushion to a line surface, slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator complete all as specified & as directed.

M&L for glazed ceramic coloured tiles 350mmx250mmx 7mm /450mmx350mmx7mm thick , set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps over and including 10 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 20mm thick granite ( any type) machine cut ,as in skirting / dados and the like laid over cement screed of 15mm thick in CM 1:4 including pointing in white cement 1:2 using marble dust with admixtures of pigments match the shade of granite stone including rubbing and polishing complete all as specified and as directed.

M&L coloured Non-skid ceramic tiles 7 mm thick (Square/rectangular) area of each tile exceeding 0.09 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match existing surfaces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for double charged premium quality 10mm thick Vitrified tiles light shade area of each tile n exc 0.36sqm laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for double charged premium quality 10mm thick Vitrified tiles light shade area of each tile n exc 0.36sqm as in vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and steel based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

S&F GI tubing15 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking up/down old tubing from any position complete all as specified and as directed.

S&F in repairs concealed stop valves 15 mm dia cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F in repairs Bib taps 15mm dia fancy type cast copper alloy chromium plated, with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as directed.

S&F in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550 mm x 400mm including all fittings and CP Pillar tap, including cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate) complete all as specified and directed.

S&F in repair vitreous china wash basin coloured flat back size 550 mm x 400mm including all fittings and CP Pillar tap, including cutting for and pinning in ends of brackets or erecting stand etc complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate) complete all as specified and directed.

S&F in repair 15mm dia PVC connection pipe 600mmm with PTMTnuts complete all as specified and directed.

S&F in repair suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner shall not be placed at more than 450mm from the adjacent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid complete all as specified and as directed.

S&F in repair False ceiling with 12mm thick of size 600mm X 900mm Plaster of paris sheets fixed with machine screws on and including GI channel 16 gauge grid work main joists placed at 750mm, centre to centre and cross joists 450mm centre to centre hanging with 6mm dia GI wire suspenders roof " J" hook bolts and nuts and treating the POP sheets with thin layer of POP with gypsum binder till smooth surface is acheived and applying two coats of plastic emulsion paint of approved colour over a coat of primer matching with the colour of ceiling sheets complete all as specified and as directed.

S&F decorative flowers design/ moulding using POP of dia not exceeding 40cm in circular shape as per approved design fixed in position including preparing the surface and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets complete all as specified and as directed.

S&F decorative cornices/ moulding using POP of cross sectional dimension exceeding 13sqcm and not exceeding 25 sqcm as per approved pattern and design fixed in position including preparing the surface and applying two coats of plastic emulsion paint over a coat of primer matching with the colour of ceiling sheets complete all as specified and as directed.

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge.

M & L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm cable (including connecting to earth dolly) laid/fixed in and including PVC conduit of not less than 20mm dia with all fittings and accessories including suitable modular PVC box or pressed steel modular boxes made out of 1.6mm thick mild sttel including cover plate with frame laid /fixed in concealed on walls/ceiling, afor One light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed.

All as per item No 75 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board.

All as per item serial No 75 here-in-before but for One 3 pin 5 Amp socket outlet on same board with other switches.

All as per item No 75 here-in-before but wiring with 2.5 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 2.5 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.

All as per item No 75 here-in-before but wiring with 4 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination modular outlet on independent board with 4 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.

S&F modular switch1 module 6 Amps 240 V single pole one way 240 volt complete all as directed.

S&F modular socket outlet 3 pin, 2-in-1, 6 Amps 2 module complete all as directed.

S&F modular switch socket combination outlet , 2-in-1, 6 Amp 3 module complete all as directed.

S&F modular switch socket combination multipurpose, 5 in 1, , 5 & 16 Amp 3 module complete all as directed.

S&F ceiling rose surface bakelite 65x50mm three terminal complete all as directed.

S&F lamp holder insulated PVC/ Polycarbonate/ bakelite body, with back plate suitable for batten fitting or PVC round or squre box, complete all as directed.

S& Fmodular stepped type electronic fan regulator, two module size, flush type complete all as directed.

M&L for Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit shall be measured as one unit.

S&Fin repair regal batten for LED Tube rod pre-wired including LED tube double sided 1x20W connecting up with aluminium housing and sheathed 1100 volt grade flexible copper cable & fix on 2 no. of PVC block complete all as directed. (Make:- Havells, Model No: REGALBATTENT8UPTO1X22WDSBSWH+CRSTAL1213T8DSTL20WLED865SGLASS or equivalent model of make Bajaj / Philips / GE / Crompton)

S&F in repairs wall decorative fixtures in durable plastic body and designer mesh in gold finish suitable for 9 W LED lamp of B-22 including lamp of 9 W complete all as specified and directed. Make : Havells Cat No. LHFOECE1TZ1B014 or in equivalent of Bajaj/CG/Philips

S&F in repairs round shape 12 Watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F in repairs round shape 12 Watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F in repairs gate decorative Led light aluminium die casting transparent type glass diffuser black colour suitable for 12 W Led lamps B-22 base including lamp complete.Make : jaguar/Havells/Philips/Bajaj.

S&F in repairs LED luminaire 600mmx600mm, 35/36 W 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete.Make : jaguar/Havells/Philips/Bajaj.

S&F in repairs 15 W LED luminaire recessed mounted with high bright ness LEd for glare free homogenous illumination suitable for Armstrong/ grid ceiling and fixtures size in mm ( LXWXH) 295X295X70complete.Make : Havells Model : Pluto1x PLR15WLED840S/pluto1x1PLR 15WLED 857S or equivalent in Philips/Bajaj.

S&F in repairs decorative hexagonal bulk head LED luminaire 10Watt,6000K with IP 66 Protection complete as specified and directed. (Make: Havells Model HEXAFT10WLED857SSYMBOPC or equivalent of crompton/Bajaj/Philips)

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 4mm dia GI wire upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including taking down old one and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.

Supply and fixing in repairs building security light bracket made of GI pipe 40 mm bore medium grade (bend to shape), 2.00 metre long and fixed with Ms flat iron clamp(clamp shall be 40 x 5mm), nuts, bolts and washers on pole complete all as specified and directed.

Supply and fixing in repairs modular north west outlet tiny trip C-25, 2 pole MCB 240 V 50Hz single phase motor startar current range from 11 Amp to 18 Amp 240V 50 Hz AC including top complete all as specified and directed.

Supply and fixing in repair building security liminaires WSPD 48 Watts epoxy powder coated pressure die cast aluminium housing with weather proof gasket for LEDs and control gear compartments, pressure die cast aluminium frame with heat resistant toughened clear glass fixed with SS screws. CRee LED/Equivalent colour temp-5700 K +/-300 K lens , IP-66, lumen efficiancy >100, lm/w. surge protection, 4 KV internal ( built in) with twin core conductor complete all as specified and directed including testing on completeion. Make: Havells Cat No. ENDURAPEARNEOSL48WLED757SASYTOPC or equivalent in Philips/WIPRO/CG.

Taking down ceiling /wall / exhaust fans of any sweep carefully and and transporting from any location to MES E/M store yard and back after repairing and refixing in position duly painted with one coat of synthetic enamelled paint by spraying including filling cavities with filler connecting up after neccessary repair as directed. complete all as specified and directed.

S&F in replacement MCB DB, double door sheet metal enclosure TPN 4 way with 200 A rated bus bar complete and grouted in wall with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. (Make :- Legrand/ Siemens/Schnider/L&T)

S&F in replacement MCB DB, double door sheet metal enclosure SPN 8 way with 200 A rated bus bar complete and grouted in wall with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. (Make :- Legrand/ Siemens/Schnider/L&T)

S&F in replacement MCCB DB, IP-43, double door sheet metal enclosure VTPN 4 way with 250 Amps rated copper bus bar 415 volt complete and grouted in wall with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. (Make :- Legrand Cat No. 507745 or in equivalent of Siemens/Schnider/L&T.

S&F in repair MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA, C-series marked fixing in DBs (DBs catered separately in this Schedule) (Make :- Legrand/ Siemens/Schnider/L&T)

S&F in repair MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series complete all as specified and directed. (Make :- Legrand/ Siemens/Schnider/L&T)

S&F MCCB 125 Amps, 415V , 16 KA 4 pole complete all as specified and as directed. Make :- Legrand / Siemens/Schnider.

S&F in repair MCB Tripple pole & neutral 40 to 63 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series complete all as specified and directed. (Make :- Legrand/ Siemens/Schnider/L&T)

Taking down carefully by unscrewing from board/outlet boxes, fitting and fixturessuch as switches, sockets,ceiling rose, lamp holders, brackets ceiling fitting ,bulkhead fitting, tube light fitting and regulator etc for reuse at site or carring to the store ( To be measured only when found in all respect complete for reuse) and making good disturbed surface of wall, flooretc complete all as directed by Engineer-in-Charge.

Refixing serviceable fittings/ fixtures as obtained from serial item No. 108 here in before and connecting up with suitable size cable in location as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 35 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

M & L for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Supply and laying GI tubing 32mm dia light grade for cable protection and fixing to existing pole with mild steel flat iron clamp of size 25mmx3mm with nuts, bolts etc. complete all as specified and as directed.

Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)

M&L for Sub class ‘B’ old size well burnt brick laid flat in trenches over the cable for protection of LT cable complete all as specified and as directed.

LAXMI CONSTRUCTION

VENUS TRADING CORPORATION