Renjuvation of Andikulam Oorani in Ward C Block 2 S No 391 at in Manamadurai Municipality

Amount

Earth work excavation deploying earth moving machinery for desilting channel having a width of more than 10m and forming bund on either sides and depositing the earth on banks including jungle clearance etc complete.

Earth work excavation for foundation in Hard red earth, shales murram, gravel, stoney earth mixed with small size boulders SS.20B Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock recuiring blasting inclusive of shoring shuttering and baling out water and cleaning and leveling the site etc., complete - Narrow Foundations GI pipe

Compound Wall

Footpath

Earth work excavation for foundation in Hard red earth, shales murram, gravel, stoney earth mixed with small size boulders SS.20B Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock recuiring blasting inclusive of shoring shuttering and baling out water and cleaning and leveling the site etc., complete - Narrow Foundations GI pipe

Inlet and Outlet

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Compound Wall

Footpath

Inlet and Outlet

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Footpath

Inlet and Outlet

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Compound Wall

Footpath

Inlet and Outlet

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Compound Wall

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Compound Wall

Supplying and fixing of 50mm dia GI pipe pillar size 0.20mx0.20mx2.10m Height including all charges etc., complete as per standard specification.

Compound Wall

Providing and fixing of chain link 2"x2" using 10 gauge galvanaised iron work as per standard specification. D/f for Gate

Compound Wall

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per clause 406 of MORTH specifications

Footpath

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Footpath

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Inlet and Outlet

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Inlet and Outlet

Supplying and laying in flooring with fully polished sinthetic grey colour granite stone of 20mm thick (average) of 4' x 2' in size laid over base layer of cement mortar 1:3 (one cement and three sand)-20 mm thick and applying cement slurry & pointed with

Supply and fixing of 4 Metre length single bracket polw with base plate (250 x 250 x 6mm) 76.10mm OD x 3.65 thick x 4000mm length etc complete

Supplu of 30W LED street light fitting with LED etc complete

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and erecting of 4 x 6 Sqmm UG copper cable, includinf cost and conveyance of all materials to the site and labour charges etc complete.SD-201

Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door of double door type with metal door with IP43 protection with 40A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make)SD-179

Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply+D13 and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete.SD-130

Supply and laying of 2 x 6 sq.mm PVC LTUG aluminium amrmoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good SD 197

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Single phase Distribution board with MCBs ways single phase DB No. of ways incomer MCB / Insulator - 2 No. of wsays incomer ELCB/RCD - 2 No. of outgoings ways - 2

Supply and fixing of fuse units 63 Amps Porcelain Fuse Unit (500V) PWD SOR pg no-120

Supply and fixing of Triple Pole switches (Side handle) 100Amps TPN switch with HRC fuse sheet steel Double Break PWD SOR P.No 119

Supply and fixing of Neutral Link 15 Amps 12 way Neutral link PWD SOR P.No 126

Supply and fixing of 63A TPN switcch disconnector fuse unit interior only with HRC fuses Double break including all material labour charges etc., complete PWD SOR pg no 119

Providing stainless steel dustbin in various places on walking track with all necessary accessories etc., completye as directed by the departmental officers

Supplying and Planting of Poovarasu tree sapling of height 180 - 240 cm in polythene bag of dia 30cm including supporting stack of 5 cm dia casurina pole of 10 feet height, including loadingand unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting ofsapling, refilling of excavated earth etc asdirected by the site in-charge.PD-1169

Supplying and Planting of neem tree including loading and unloading charges, transportation, stacking of saplings at site, earthwork excavation of required size, planning of sapling, refilling of excavtaed earth etc as directed by the site in-charge.PD-1166

Supplying and planting of Pungam tree sapling of height 240-300cm in polythene bag of 30cm including supporting stack of 5cm dia casurina pole of feet height, including loading and unloading charges, transportation, stacking of saplings at site, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.PD-1208