SPECIAL REPAIR TO BLOCK NO. P-288 AND T-289 IN ZORAWAR ENCLAVE AT ITARANA CANTT ALWAR

Amount

B/R ITEMS Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars & precast concrete mosonry etc. and removal all rubbish material complete all as specified directed.

Demolition of mud in roofs, ant thickness including palstering, existing treatment and cleaning (whether full thickness removed or only or part three of) etc. in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 km but not exc. 1.5 km complete all as specified and directed.

Dismantling of cement concrete tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down cement or cement lime plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish off the premises, complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level and removal all rubbish material complete all as directed..

Dismantling asbestos Cement (corrugated or semi corrugated etc) sheet in roof covering complete all as directed.

Dismantling of PVC (SWR) drain pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required for the following sizes, complete all as specified and directed.

75mm bore.

110mm bore.

Taking up or down steel tubing and connections including cleaning for refixing or removal complete all as specified and directed :-

15mm bore.

20mm bore.

25mm bore.

Taking down chowkhats or frames with shutters (without taking off shutters from frame)n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) exc 1.5 Sqm but n exc 4 Sqm each complete all as directed.

Taking down shutter of any description exc 1 Sqm but n exc 2 Sqm each complete all as directed.

Dismantling of mild steel work of any description (MS girders in roof) not otherwise provided for complete all as specified and directed.

Dismantling of stone slabs of any description, in roof, suspended floors, chajjas, landings etc. jointed in any mortor complete all as specified and directed.

Dismantling water tank of capacity exceeding 250 Ltrs but not exceeding 500 Ltrs and removal from site complete all as specified and directed .

M & L for cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection 50 mm thick laid in bays and surfaces finished even and fair, including filling the joints with bitumen mastic complete all as specified and directed

M&L cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels, quoin blocks (for use iwth masonry), string courses, copings, including chamfers, weatherings, thoaring etc. and setting in mortar complete with joints to match complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-1, using 12.5 mm graded stone aggregate as in under floor tiles, finished fair and even complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

M & L for rubble walling brought upto courses, well bounded, bedded and soildly hearted, built in cement mortar 1:6 but except stone complete all as specified and directed. Note:- Old serviceable stone obtain from Srl item No. 96.00 shall be used.

M & L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of path/ hardstanding complete all as directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on fair surfaces of brick but on ceiling and rendering is to be finished even and smooth without using extra lime or cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 on brick work or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra lime or cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on other than fair face of brick masonry surface or on stone masonry surfaces finished even and smooth without using extra cement using liquid water proofing admixture @ 0.4% by weight of cement (WPA shall be measured and paid separately) complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 onceiling finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparing old decoated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified and directed.

M & L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat of water primer complete all as specified and directed.

BLANK

M & L for preparing old plastered or unplastered of ceiling and applying one coat of white wash complete all as specified and directed.

BLANK

M & L for prepapration of old decorated plastered surfaces of walls and applying one coat of oil bound distemper over on coat of 1mm thick birla care putty of approved tint complete all as specified and directed.

M & L for prepapration of newly plastered decorated surfaces of walls and applying two coats of oil bound distemper over on coat of 1mm thick birla wall care putty of approved tint complete all as specified and directed.

BLANK

M & L for prepapration of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

BLANK

M&L 300x300x7 mm thick non skid ceramic coloured tiles as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including screed bed 15 cm thick CM (1:6) complete all as specified and directed.

M & L 450x350x7 mm thick glazed ceramic coloured tiles as on vertical surfaces such as skirting or dado and riser to step etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles over rendering in CM 1:4 complete all as specified and directed.

M & L for non skid ceramic tiles (coloured) 10mm thick (square/ rectangular) plaster in cement mortar 1:6 including necessary cutting of tiles as required size and area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm and including 15 mm thick screed bed in CM (1:6) laid on floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick cement plaster in CM 1:4 on other than fair faces of brick work or stone suraces of walls complete all as specified and directed.

S &F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube fixing in opening complete all as per specifications and drawings as applicable to item 08095 given in SSR Part – II (2010).

M&L 18-20mm thick machine cut Kota stone slab flooring over cement screed bed 15mm thick in CM 1:6 laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing & polishing as in flooring complete all as specified and directed.

BLANK

M & L 18-19mm thick machine cut Kota stone slab as in riser of steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement mortar 1:3 including rubbing and mirror polishing including ball nosing of exposed edges complete all as specified and directed.

M & L for cutting polishing of old Kota Stone surface complete all as specified and directed.

S&F steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed for following sizes:-

15mm bore.

20mm bore.

25mm bore.

S&F in repair 15mm bore dia bib tap cast copper alloy fancy chromium plated crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair 15 mm bore angle stop valve of copper alloy, fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15mm dia Brass CP mixer for mixing hot & cold water srewed down for iron pipe and fixed complete all as specified and directed.

S & F in repair 15 mm bore dia angle stop valve of copper alloy (concealed type), fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs, 15mm bore ball valves, high pressure, with polythelene float and fly net complete screwed, iron pipes fixed in positiion complete all as specified and directed.

S & F in repair 20 mm bore dia stop valve of copper alloy, chromium plated fancy type with long shank and cup (Concealed type), screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15mm bore PVC pipe connections, with adopter and washer at both end of length 600mm complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/walls or in floors pipe including taking out old unserviceable PVC/CI Pipe, complete all as specified and directed for the following sizes:-

75mm bore.

110mm bore.

150mm bore.

S&F PVC (SWR) bends any radius complete all as directed for the following sizes:-

75mm bore.

110mm bore.

S&F PVC (SWR) 75mm bore junction single (Single T) equal or unequal with access door complete all as directed.

S&F PVC (SWR) 110 mm bore junction single (Single T) equal or unequal with access door complete all as directed.

S & F PVC (SWR) vent cowl for 110 mm bore of pipe complete all as specified and directed.

S & F in repairs 100mm dia grating doom of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified and directed.

S & F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement dia of outlet 75 mm bore complete all as directed.

S & F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repair PVC low level flushing cistern10 litre capacity with intel ball valve float & handle, syphonic action type including brackets & flush pipe of polythylene of low or high density or PVC 32mm dia for LLFC fixed in repairs all as specified and directed .

S & F in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks galvanised stainless steel wire staples complete all as directed.

S & F in repairs mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks galvanised mild steel wire staples complete all as directed.

Supply only sheet glass ordinary quality 4.8mm thick and glazed with oil putty in squire not exc. 0.5 sqm each pane complete all specified and as directed.

BLANK

Supply only 4mm thick sheet glass frosted glass with rubber bedding in square n exc. 0.5 sqm each pane complete all specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) anodized aluminium windows and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/RM including necessary jointing cleats, glazing clips, rubber neoprene packing, powder coated anodised aluminium snap beading, screws, powder coated anodised aluminium fittings such as peg stays 150mm long (01 No. for each leaf), Butt hinges type B-21 100mm size (02 Nos for each leaf) & handle (01 No for each leaf) etc complete all as specified and directed. (Note :- Glazing shall be measured and paid separately under respective items of Schedule.

BLANK

Supply fabrication and fixing powder coated (Thickness of powder coating not less than 50 micron) anodized aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

S & F anodised aluminuim grill of approved pattern for windows/ ventilators/ door complete all as specified and directed .

M&L for mild steel framed work as in doors or gates angle or others covering door etc to be prepared for handing or sliding with including either hooks and hinges or steel hanging door fittings(exclusive of steel or other covering running rails and guides) and hanging also fastening and fixing complete conforming to FE-290 Gde E-195 all as specified and directed.

M&L 35mm thick factory made 2nd class glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. The shutter shall be fitted to the chowkhats as directed

S&F 35mm thick factory made IInd Class Hard wood plain framed, panelled shutter(two panel) with lock rail and panel of 9mm B.W.P. commercial ply seasoned & chemically pressure treated /12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.

BLANK

BLANK

S&F for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of zinc chromic primer complete all as specified and directed.

M&L preparation old steel & iron surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint of 1st grade quality complete all as specified and directed.

M & L for preparation of newly wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over one coat of pink primer complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade complete all as specified and directed.

S & F Stainless steel butt hinges medium weight ISI marked of size 100 mm complete all as specified and directed.

BLANK

S & F in repairs health faucets with 1.0mm long bend pipe water screwed down for iron pipe of 15mm bore, compelete all as specified and directed.

S & F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed, complete all as specified and directed.

BLANK

BLANK

S&F 150mm size aluminium handle, cast type anodised complete all as specified and directed.

S&F 300mm long mild steel sliding door bolts with hasp & staples type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, 04 on bolt plate and 02 on staple plate and fix complete all as specified and directed.

S&F 300mm long stainelss steel sliding door bolts with hasp & staples type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, 04 on bolt plate and 02 on staple plate and fix complete all as specified and directed.

S & F mild steel 300mm, Helical/rat tail door spring with MS sheet wing pattern including roller and roller plate complete all as specified and directed.

M&L screed bed or bedding layer of mortar over PCC padding , 15 mm thick, in cement mortar 1:4, mixed with water proofing compound 2% by wt of cement on top of chajjas, parapet and over roof slabs finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

M & L for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gussets plates, Fe-290, Gde E-165 etc. complete all as specified and directed.

Cutting opening through wall (old masonry built in cement mortar) for door, window and other openings (with or without reveals) or enlarging existing openings or cutting out defective masonry for under pinning including providing, fixing and removing, shoring, cleaning and stacking store and removing surplus to store and rubbish off the premises etc complete all as specified and directed

S & F 50mm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc n exc. 2 m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 and including dismantling of old stone slab complete all as specified and directed.

BLANK

M & L for cutting holes into stone walls built in cement mortar or in cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 not exc. one brick complete all as directed.

M & L forming jambs etc to opening including cutting toothing and property bonding into old work also facing joining and pointing to match existing work complete in CM 1:6 complete all as specified and directed.

M & L for MS flat iron 25x3mm for hold fast bands, including welding to angle iron/door/ window frames etc., complete all as specified and directed.

S & F in repair stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with and including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug and steel screws on walls/beam, including PVC curtain rings of matching colour @ 10 cm C/C complete all as specified and directed.

S&F rotational moulded polythylene water tanks (Cylindrical vertical with closed top) of any capacity and fixed in same position capacity of tank in 500 Ltrs and including all necessary fittings complete all as specified and directed.

S&F in repairs for pressed steel shutter 1mm thick including pressed steel frame of 1.25mm thick sheet, 12mm dia MS rod for locking, two Nos chromium plated handle and one mortise pattern lock including two coat of spray painting over a shop coat of primer complete all as shown on drg No. TD/2004/29 sheet no 1/3 to 3/3.

M&L for laying 60mm thickness machine pressed precast concrete glazed coloured interlocking paver block with any shape and size confirming to IS 15658-2006 M-35 grade grey cement and pigment over and including 25mm thick sand cushioning complete all as specified & directed.

Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.5 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/S IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt (weighing not less than 150 gm/Sqm), with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions, complete all as specified and as directed. Note :- (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm. (ii) Polymeric membrane shall be taken to a height of 60cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimeny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen. (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.

S & F in repairs Jet Spray chormium plated brass for EWC with & including PVC connection 600mm long suitable for 15mm bore GI pipe with PTMT nut & nipple, complete all as specified and directed.

S & F in repairs corner shelf, complete all as specified and directed. Make 'Parryware Cat Part No. T6010A1 or equivalent of Jaquar/ MARC/Somany/Prayag/commander.

S & F in repair brass chromium plated wall mizew 2 in 1 with provision for overhead shower with 115mm long bend pipe water screwed down for iron pipe of 15mm bore, complete all as specified and directed.

S & F in repair shower rose, chromium plated, 125mm size dixed to 15 mm pipe, complete all as specified and directed.

BLANK

S & F in repairs white Vitreous china wash down water closet pan (pedestal pattern) with superior quality water jet including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.

S & F in repair CP Towel rack 600mm fixed to walls with chromium plated, brass screws complete all as directed.

S & F mirror cabinet PVC frame of size 400x500mm fixed to wall with rawl plug & stainless steel suitable size screwed, complete all as specified and directed.

M&L 18-20mm thick granite slab/tiles (of any type table rubbed and polished) in steps, jambs pillars, window cills, cooking platforms and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

BLANK

Excavation in trenches, n exc 1.5 m wide and n exc 4.50 m in depth or n exc 10 Sqm on plan, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes or for laying underground cable, pipe lines etc. in soft/ loose soil, complete all as specified & directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick,complete, all as specified and directed.

Removal of excavated soil/material to a distance n.exc 50m and depositing where as directed at a level of 1.5 m above the starting point complete all as specified and directed.

M & L for brick protection for UG XLPE cable with burnt clay FLY ASH bricks, old size laid dry and flat abutting each other with gaps between adjacent brick 10mm with width equal to length of brick in trenches across the cable complete all as directed.

BLANK

BLANK

M&L for dry sand and punning for cushioning to under ground cable complete all as specified and directed. Note : For the purpose of payment only punned thickness shall be measured.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppy and fixing in the frame at site complete all as per specifications and drawings as applicable to item 08080 given in SSR Part – II.

E/M ITEMS Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including teak wood battens/PVC casing caping and making good disturbed surfaces of walls, floors & ceiling etc.including dismentling of fittings to match with existing surfaces, complete all as specified and directed.

Disconnecting from elect connection and taking down carefully the existing electric energy meter of any capacity, any make, any size and depositing to MES store yard and refixing the same inside the old meter inside box carefully incl necessary electric connections, complete all as specified and directed.

Disconnecting from elect connection and taking down carefully the existing Ceiling Fan/Exhaust fan/Geyser of any capacity, any make, any size and depositing to MES store yard and refixing the same ceiling fan/ exhaust fan/ Geyser carefully incl necessary electric connections, complete all as specified and directed.

M & L for point wiring complete with 1.5 Sqmm single core unsheathed stranded copper conductor cable of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping not less than 20mm width with MS sheet metal sunken switch/terminal box 1.2mm thick and phenolic laminated sheet cover 3.0mm thick and brass screws with cup washers with all necessary wall cutting and making good distrubted surface as directed, including all necessay wall cutting and making good disturbed surface including 1.5 Sq.mm solid copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly for the following :-

One light point controlled by one, one way switch

One fan point controlled by one switch and regulator.

One bell/buzzer point controlled by bell push.

One light point controlled by one, two way switch

One 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

One 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

M & L for point wiring complete for 15 Amps switch socket combination on independent board with with 2.50 Sqmm single core unsheathed stranded copper conductor cable of 1100 volts grade PVC insulated and unsheathed FRLS cable enclosed in and including PVC casing and capping not less than 20mm width with MS sheet metal sunken switch/terminal box 1.2mm thick and phenolic laminated sheet cover 3.0mm thick and brass screws with cup washers with all necessary wall cutting and making good distrubted surface as directed, including all necessay wall cutting and making good disturbed surface including 2.50 Sq.mm solid copper conductor with green PVC FRLS insulated unsheathed earth continuity conductor cable to common earth & connecting to earth dolly.

S & F switch piano flush type 5/6 Amps single pole one way 230 volts complete all as specified and directed.

S & F switch piano flush type 5 Amps single pole two way 230 volts complete all as specified and directed.

S & F switch piano flush type 15 Amps single pole one way 230 volts complete all as specified and directed.

S & F, socket outlet 3 pin(with 2 pin outlet also), 5/6 Amp flush type, 240 volts all as specified & directed.

S&F socket outlet two-in-one, 3 pin, 5 Amp and 15 Amp, flush type , 240 Volt complete all as specified & directed.

S&F Bell push flush type 5 Amps siingle pole one way 240 volts complete all as specified and directed by Engineer-in-Charge.

S & F for electric bell/buzzer, AC 230 volts, single pole, ISI marked, complete all as specified and directed.

S & F ceiling rose surface bakelite 65x50mm with two or three terminal complete all as specified and directed.

S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16W to 20W with LED tube of model E-LITE LED pride and connecting up with the fitting from ceiling rose/connector using copper flexible cord of size 1.5sqmm, 3 core of suitable length complete all as specified and directed. Make :- Havelles Cat Part No LHEXBHP71N1W018 or equivalent of Philips/Cromption Greaves/Bajaj/Wipro/GE.

S & F for LEB bulb energy saving 10/11W complete all as specified and directed. Make:- Havells/Crompton/Syska

S & F for lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply, Installing and Testing out door wheather proof busbar chamber of size 60cmx45cmx45cm made out of 3.15mm MS sheet having one side openable hinged door shutter with locking arrangement and provn of two Nos 60cm long 40x40x6mm angle iron legs welded and 4 Nos Aluminium busbar of 200 Amp rating and incoming MCCB 100 Amps adjustable thermal magnetic release type complete errected on ground with necessary PCC 1:3:6 type C-2 foundation complete bus bar chamber painted with two coats of approved enamel paints over one coat of primer including making cable connection with necessary gland, lugs/ thimbles, complete all as specified and directed.

Supply & Fixing of stepped type electronic fan regulator socket type 0-4 step of capand connecting up , ISI marked , 100 W 200-250 Volts complete all as specified and directed.

S & F sheet metal enclosure double door DB SPN 8 way, 240 volts protection class IP-43 made out of CRCA mild steel sheet surface with epoxy powder coated surface confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity all as specified and directed.

S & F sheet metal enclosure single door DB TPN 04 way, 415 volts protection class IP-30 made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity completed all as specified and directed.

S & F sheet metal enclosure single door DB suitable for fixing MCCB 100 Amps, TPN 04 way, 200volts protection class IP-30 made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted confirming to IS-13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity completed all as specified and directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with 01 No. single pole MCCB 20 Amps & including taking down single pole and neutral enclosure, complete all as specified and directed.

S & F MCB SP 40 Amps, 440 volts, B-curve, rupturing capacity 10KA conforming to IEC-60898, Part-I complete, all as specified & directed.

S & F 6-32 Amps MCB, single pole & neutral, 240 volts, C curve, 10 KA ISI marked as per IS/IEC 60898-1-2002, ingrated label Holder, sliding bottom clamp, improved air channels, colorb coded on/off indication on dolly IP-20 protected terminals DC-80V per Pole- 1 KA, complete all as specified and directed. Make:- Legrand/Havells/ABB

S & F 32 Amps MCB, single pole & neutral, 240 volts, C curve, 10 KA ISI marked as per IS/IEC 60898-1-2002, ingrated label Holder, sliding bottom clamp, improved air channels, colorb coded on/off indication on dolly IP-20 protected terminals DC-80V per Pole- 1 KA, complete all as specified and directed. Make:- Legrand/Havells/ABB

S & F 63 Amps MCB, single pole & neutral, 240 volts, C curve, 10 KA ISI marked as per IS/IEC 60898-1-2002, ingrated label Holder, sliding bottom clamp, improved air channels, colorb coded on/off indication on dolly IP-20 protected terminals DC-80V per Pole- 1 KA, complete all as specified and directed. Make:- Legrand/Havells/ABB

S & F for submain wiring with 2 single core PVC insulated & PVC unsheathed FRLS cable 1100 Volt grade with 06 Sqmm copper multistranded conductor drawn through and including PVC conduit/casing-caping fixed on surface to wall/ ceiling by means of MS screws and saddles including one run of 6 Sqmm single core multistranded copper conductor 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth and connecting to earth dolly and including taking down old u/s sub main wiring complete all as specified and directed. Note: - Two runs of main cable, one run of earth continuity conductor and one run of conduit/casing-caping will be measured and paid as one length only.

S & F second class hardwood rectangular block open recessed of size 30cm x 25cm x 5 cm depth with 3 mm thick phylum/backalight sheet with suitable steel screws & PVC rawl plug (4 Nos) complete all as directed.

S & F second class hardwood rectangular block open recessed of size 50cm x 30cm x 5 cm depth with 3 mm thick hylum/backalight sheet with suitable steel screws & PVC rawl plug (4 Nos) complete all as directed.

Supply and fixing LED type street DRACO Series , light luminaire 20 Watt 230 V, 50 Hz and including all necessary fitting accessories and LED complete all as specified and directed. Make:- Cat Part No LTESS20WLED of make C & S or equivalent model of make Crompton/ Greaves/Wipro

Supply / Lying, jointing and testing XLPE insulated armoured heavy duty LT under ground cable with aluminium stranded conductor, 1100 volts grade cross sectional area 35 Sqmm 3.5 core laid in trenches/ ducts/ through pipes, under floors or roads/along poles etc complete all as specified and directed. Note :- Sand cushioning, Cable protection, GI protection pipe, Clamps, Jointing kits and Excavation & Earth work shall be measured & paid for separately.

Supply / Lying, jointing and testing XLPE insulated armoured heavy duty LT under ground cable with aluminium stranded conductor, 1100 volts grade cross sectional area 50 Sqmm 3.5 core laid in trenches/ ducts/ through pipes, under floors or roads/along poles etc complete all as specified and directed. Note :- Sand cushioning, Cable protection, GI protection pipe, Clamps, Jointing kits and Excavation & Earth work shall be measured & paid for separately.

M & L for 40mm bore GI Pipe (Light Grade) for protection of LT cable fixed to walls/ poles/ road crossing including clamps complete all as specified and directed.

S & F street light brack made to shape at required angle made out of 25mm dia (light grade) GI tubing of length not less than 1.5m clamp 02 nos with bolts, nuts and washer including taking out of old unserviceable bracket, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x 600 x 6.3 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M deep below normal ground level and connected to galvanised iron earth wire 4mm dia by means of bolts, nuts, checknuts and washers of GI or steel all as shown in electrical plate No 3 of SSR Part-I 2009 and connection to main switch board / Test point /panel /equipment all as specified or indicated and testing on completion as directed by the Engineer-in-Charge including necessary excavation & earth work in any type of soil, returning, filling in and removal of surplus soil to a distance n exc 50 M, Charcoal and Salt in alternate layer 15cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20mm dia for watering and 15 mm dia 3 M long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25mm x 3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1 40mm thick precast RCC pit cover1:2:4 type B1 shall be provided on CI frame etc complete, all as specified & directed.

M/s M S Sharma and Co.

M/s S Amarjit Singh

Shiv Shankar Nirman Co.

J.J.ENGINEERING