SPECIAL REPAIR TO BUILDING NO P-47 (SINGLE JCO,s Living) at 41 MED REGT AT JANGLOT UNDER GE BASOLI.

Amount

M&L for roof treatment with the following specicification - (a) Removal of existing old treatment of any type including PCC padding and roughening surfaces of old concrete of picking sweeping and washing down with water (b) applying evenly one coat of blown hot bitumen of grade 85/25 @ 1.2 kg per sqm (c) Applying a layer of APP based polymeric membrane 3mm thick (minimum) weighting 3.5 kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160 gms per sqm top of membrane with granular finish. The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application . NOTE:- The work of roof treatment shall be executed through authorised dealer of manufacture of APP after approval of GE.

M& L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone agg) of average thickness 50mm , top surface of plain concrete padding shall be finished even & fair without using extra cement, complete all as specified and as directed.

Dismantling of AC (Corrugated or semi corrugated etc) sheets in roof covering including ridges, complete all as specified and as directed.

Dismantling of ceiling asbestos cement board any thickness including cover fillites, complete all as specified and as directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm (TCT) of approved colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm (TCT) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws. complete all as specified and as directed.

S&F Anodised aluminium snap grid of size 600x600 mm frame work made with aluminium angle and T section for false ceiling as specified vide clause 10.38.1 on page 216 of SSR Part-I, complete all as specified and directed.

S&F Hangers 6 mm dia GI ( upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long complete all as specified and directed.

S&F exposed metal frame ceiling with 6mm thick calcium silicate board of siliceous and calcareous material reinforced withcellulose fibre for fixing in 600 mm x 600 mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A, complete all as specified and as directed.

M&L for erection and fixing and fabrication only mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A, complete all as specified and as directed.

S &F mild steel screw bolt,5 to 10mm dia machine made with hexagonal head at one end and screwed the other, or screwed both ends screwed, and each screwed end to be fitted with washer and one hexagonal or square nut not exceeding 5cm long, complete all as specified and as directed.

M & L for 75mm thick, PCC 1:3:6, type C-2, using 40mm graded stone aggregate as in plinth protection finishing the surfaces even and smooth with using extra cement complete all as specified and as directed.

M&L for roughening surface of old concrete floor by picking ,sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg of cement per sqm ,complete all as specified and as directed.

M&L for 25 mm thick cement concrete (1:2:4) type B0 using (12.5 mm graded crushed stone aggregates) as in flooring, complete all as specified and as directed.

S&F Non-skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18 sqm but n . exc 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tile, over and including 15 mm thick screed bed in CM 1:4, complete all as specified and as directed.

S&F Glazed ceramic coloured tiles in vertical surfaces, 450mmx300mmX7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade of tile, over and including 10 mm thick cement plaster in C.M 1: 4 complete all as specified and as directed.

Taking down chowkat or frame with shutter (with out taking off shutter) from frame n, exec 1.50 sqm each complete all as specified and as directed.

Taking down chowkat or frame exe 1.50 sqmtrs, n. exc 4 Sqm each and making good disturbed surface etc complete all as specified and as directed.

S&F Pressed steel frame for doors with double rebates including necessary fixing lugs, hinges, lock strike mate etc complete of size 125x60mm complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in back filling of pressed steel chowkats complete all as specified and as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame shall be covered with heat moulded wood grain printed 5mm thick PVC sheet x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90*) used instead of exposed portion of PVC sheet beading with solvent cement for stiles and PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for rail & bottom rail, panelling of wood drained PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement ,including 100 mm hinges supplying & fixing in the frame at site as per specification & drawing

M&L for Glazed and skelton shutters 35mm thick of 2nd class HW open rebated and prepared to receive glass or wire gauze etc. shutters divided in square with shash bars, size of members of shutters as specified in SSR Part-1, secton 8, clause 8.20(a), complete all as specified and as directed.

S&F Plain framed factory made 35mm thick shutter of 2nd class HW (two panel) with lock rail and panels of 12mm veneered partical board with commercial veneering on both faces , the size of rail and style as per IS 1003 (Part-1) kiln seasoned and pressure treated, complete all as specified and as directed.

S&F steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.

M&L Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m in each pane, complete all as specified and as directed.

S&F 4 mm thick frosted ordinary quality glass and glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F aluminium handle ,cast type, anodised ,125 mm size, complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long complete all as specified and as directed.

S&F aluminium alloy , anodised ,sliding door 300mm long with hasp, staples and fixing clips of sheet extruded section and fixing bolts of extruded section complete all as specified and as directed.

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel pin type C-21, complete all as specified and as directed.

Taking down cement plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick on brick or concrete surface over internal surface with CM 1:6 surface finished ever and smooth with out using extra cement .

M&L for rendering 15 mm thick in CM 1:4, on external surface by using WPC @ 3% by weight of cement) , WPC shall be measured and paid separitely etc. finished even and smooth without using extra cement, complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3, on ceiling, etc. finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for Painting new wooden surfaces including prepration, applying one coat of pink primer and applying two coats of synthetic paint over primer, complete all as specified and as directed.

M&L for painting to new steel surfaces including prepration, applying one coat of red oxide primer, and applying two coats of synthetic paint over primer, complete all as specified and as directed.

M&L for Preparation of new plastered surfaces and applying two coats of exterior acrylic emulsion paint (Appx) on walls over a coat of primer complete all as directed.

M&L prepration of new plastered surface and applying two coats of OBD over cement based wall putty on plastered surfaces preparatory to receive distemper on wall, complete all as specified and as directed.

M&L for preparation of new pastered surfaces of wall and applying three coats of white washing complete all as specified and as directed.

M &L for preparation old steel and iron surface not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and as directed.

S&F in repairs rotational moulded PVC water storage tank 1000 ltr capacity (cylindrical vertical with closed top) hoisted & fixed in position including PVC flot valve 20 mm, all as specified in SSR Part-I, complete all as specified and directed.

S&F Gun-metal Globe or gate valves 20 mm nominal bore dia with gate with iron wheel head screwed both ends for iron pipes and fixed complete all as specified and as directed.

M&L Granite black colour of any type 18 to 20mm thick machine cut as in cooking plateforms and over 15 mm csreed bed in cement mortar ( 1:4 ) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

S&F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic seat cover , white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, complete all as specified and as directed.

S&F in repair Ceramic 570mm Oval Shape Counter Wash Basin fixed over top counter Super white color for bathroom and fixed in position and finishing with use of white cement and pigment, complete all as specified and as directed.

S&F in repair of existing flushing cistern with now 10 ltrs discharge capacity PVC flushing cistern low level with inlet ball valve etc of Make: Hindware, Cera, Paryag complete all as specified and as directed.

S&F for 15 mm bore CP jet spray for Pedestal pattern WC of make Hindware, Cera, Paryag complete all as specified and as directed.

S & F Fancy type health faucet with 8mm dia 1mtr long flexible tube (back flow preventer), chromium plated of 15mm bore, all as specified and directed.Make:Jaquar cat part No : ALD-579 or Cera cat part No : CG-105A , or equivalent in Marc.

S&F in repair bib taps screwed down high pressure with both ends for iron pipe 15mm bore fancy type long body chromium plated complete all as specified and as directed. Make ;- Jaquar, Cera, Neycer, Marc.

S&F in repair, brass CP mixer for mixing hot and cold water screwed down for iron pipe, 15 mm bore, Make ;- Jaquar, Cera, Neycer ,complete all as specified and as directed.

S & F in repair 15mm Brass CP center hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed by Engineer-in-Charge. Make : Jaquar cat part No : QQT-7167 or Cera cat part No : CQ-915A

S&F in repair, 15mm bore, stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specified and as directed. Make ;- Jaquar, Cera, Neycer, Marc.

S&F stop valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe with long shank chromium plated concealed type

S&F Fancy type over head shower with arm 225mm long. Make : Jaquar cat part No : SHA-483 & OHS-1769 or Cera cat part No : CQ-440, complete all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

Taking down steel water tubing and connection of 15mm bore, complete all as specified and as directed.

Taking down steel water tubing and connection of 20 mm bore, complete all as specified and as directed.

S&F steel water tubing medium grade 15mm bore galvanished with all fitting to walls etc.complete all as specified and as directed.

S&F steel water tubing medium grade 20mm bore galvanished with all fitting to walls etc.complete all as specified and as directed.

M&L for refixing old steel tubing and connections 15mm bore in new or old position (wall, ceiling ,floors etc), complete all as specified and as directed.

M&L refixing old steel tubing and connections 20mm bore in new or old position (wall, ceiling ,floors etc), complete all as specified and as directed.

S&F in repairs Aluminium alloy tubular 20mm external dia for curtain rod in pelmet box, curtain rods etc, complete all as specified and as directed.

S&F in repairs Aluminium Brackets for item No 68 above, complete all as specified and as directed.

S&F PVC shelves of PTMT fixed with and including chromium plated brass screws and plastic cleats, complete all as specified and as directed.

S&F Towel ring of PTMT fixed with and including chromium plated brass screws and plastic cleats, complete all as specified and as directed.

Dismantling of PVC or cast iron pipes jointed in cement mortar and taking out upto 110 mm, complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 75 mm bore fixed in trenches or floor, complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints of 110 mm bore fixed in trenches or floor, complete all as specified and as directed.

S&F PVC (SWR) bends of (any radius) with access door of 75 mm bore, complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided with access door 110 mm bore, complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided 75 mm bore, complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided 110 mm bore, complete all as specified and as directed.

S&F PVC reducers 110 mm, complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) floor traps, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed.

Demolition of brick masonry built in cement mortar including all quoins arches pillars etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.

M&L Brick masonry with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cm 1:6, complete all as specified and as directed.

M&L for Brick work with sub class 'B' Bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar1:4 and pointed flush in the same mortar as the work proceeds to hidden surfaces complete all as specified.

M&L concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregates) for 150mm bore of pipe complete all as specified and as directed.

M&L Cement Concrete 1:4:8 type D2 (using 40mm graded crushed stone agg) as in foundation filling and mass concrete complete all as specified and as directed.

M&L Salt glazed stone ware (SGSW) grade 'A' pipes 150mm bore laid and jointed on concrete bed complete including testing all as specified (Concrete to be measured and paid for separately).

M&L Cement Concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in coping including weathering slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaces complete all as specified and as directed.

M&L precast Reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) as in man hole covers set in cement mortar 1:6 all as specified and directed incl necessary form work. Note: Steel reinforcement shall be measured and paid for separately under respective items

M&L Construction of septic tank with cover slab RCC M-25(Design mix) for 10 users brick work in CM 1:4 (with top of slab at ground level) incl necessary excavation and earth work in any type of soil and disposal of surplus soil a directed including RCC manohole covers with angle iron welded frame complete vent shaft cowl all as shown on drg and specified.

M&L Soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber, brick work in CM, RCC cover slab in M-25/RR masonary/filling with brick bats, complete of size 1.8m dia x 3.0 m deep.

M&L TMT Steel bars 6mm to 8mm dia in reinforcement, cut to length, bent to shape required incl cranking, bending spirally of hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

Excavation in trenches, n exe 1.50m wide and not exceeding 1.50m in depth, for foundation etc and getting out in any type of soil,complete all as specified and as directed.

Returing filling in, including spreading leveling watering and well raming in layers n exc 25 cm in thickness, complete all as specified and as directed.

Removing excavated material n exc 50m and deposting where directed at a level n exc 1.5m above the starting point, complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and as directed.

M&L Hard core ( stone aggregate)of gauge n exc. 63mm depositing, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified and as directed.

M&L Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and no pigment over 15mm thick screed bed of 1:4 cement mortar including 75mm thick cementco concrete type D-2 1:4:8 (40mm graded agg) as in sub base, finished cement concrete surface fair & smooth without using extra cement, complete all as specified and as directed.

M&L Cement concrete M-15 Nominal mix in coping benching/PCC drain and the like including weathering ,slightly rounded or chamfered angles as directed including form work and finished all exposed surfaces, complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed with pressed mild steel terminal boxes duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge. Note: a) Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall, floors etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for fan etc with proper fixing clips all as directed

All as per item No 101 but for one 3 pin 5 Amp socket outlet on independent board.

All as per item No 101 but for one 3 pin 5 Amp socket outlet on same board.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes of adequate size with suitable thickness plastic laminated sheet cover for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as specified.

S&F switch piano flush button single pole one way 5 amps 230 volts,complete all as specified and directed.

S&F socket outlet 5 amps 3pin flush type, 230 volts, complete all as specified and directed.

S&F Switch socket combination 2 in 1, 5 pin, 5 Amp flush type, complete all as specified and as directed.

S&F in Switch socket combination 2 in 1, 6 pin, 5 and 15 Amp flush type universal, complete all as specified and as directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as specified and as directed.

S&F ceiling rose surface bakelite two to three terminal isolated body fixed on PVC round block complete all as specified and as directed.

S&F in replacement LED tube light fitting made out of CRCA sheet 1x20w,230v, including LED (tube rod) LED Driver, Bipin holders 4 feet long complete with all accessories internally prewired and including connecting up with 3 core twisted flexible copper conductor cable 0.5 Sqmm complete. Make: C & S/ Havells/Bajaj/Philips .

S&F in replacement LED bulkhead fittings luminaires with opal diffuser including (LED lamp type 10W LED 6000K), lamp holder etc. complete all as specified. Make: Philiphs, Havells,Crompton.

S&F in replacement sheet metal powder enclosure powder coated double door SPN 8 way having provision for one No incoming MCB DP and out going MCBs SP AC 230 Volts, 50 HZAC supply having protection IP 43, IK-09 with copper bus bar rated 200 Amps, neutral link,earth bar complete all as specified. Make: Legrand/L & T/polycab .

S&F MCBsdouble 40 Amps, 230 Volts, 10 KA breaking capacity of C series all as specified.

S&F in replacement MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of 'C' series in distribution boards all as specified. Note for MCB DBs and MCCB/MCBs shall be of same make, complete all as specified and as directed.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 2 run of 6.0 Sqmm as earth continuity conductor(green colour) Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 6.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as specified and directed by Engineer-in-Charge. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 6.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 6.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthing wire .)

Supply & fix fans ceiling FAN 1200MM SWEEP ac 230 Volts 50 HZ, 5 star rated having nominal elect consumption 50 watts complete with accessories such as down rod, canopy, copper wound electric motor, aluminium wings,clamps, rubber reel etc all as specified. Make : Havells /Orient/ Bajaj NOTE:- Old fan shall be deposit in E&M store Yard.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core, complete all as specified and as directed.

Supply and fix for DWC high density polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS: 14930(Part I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fittings as required complet all as specified and directed.

Supply, fixing and testing Water heater storage type with multifunction safety valve,electric operated 230V, single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve, thermostate, rust proof power coated body, indicator lamps and all safety advices as per technical instruction and of capacity 25 litres.BEE 5 star rated, including angle cock, PVC connection complete all as specified and as directed. NOTE:- Old Geyser shall be deposited in AGE E&M store yard.

Supply and fix exhaust fans, matel body, AC single phase 230/240 Volts of size 300mm sweep, fix in location by makink suitable whole and finishing the same, complete all as specified and as directed. NOTE:- Old exhaust fan shall be deposited in AGE E&M store yard.

M&L for Painting old wooden surfaces of any description not otherwise specified over 10cm width or girth, including prepration, applying one coat of synthetic paint , complete all as specified and as directed.

M&L for prepration of new plastered surfaces of wall and applying two coats of cement base paint , complete all as specified and as directed.

M&L for prepration of old plastered surfaces of wall and applying one coat of cement base paint , complete all as specified and as directed.

M&L for prepration of old plastered surfaces of wall and applying one coat of OBD over a coat of primer, complete all as specified and as directed.

Standard engineers