SPECIAL REPAIR TO PERIMETER LIGHTS, CABLING AND OTHER ASSOCIATED WORKS SERVICES AT AIR FORCE STATION SRINAGAR .

Amount

Supply, laying, jointing and testing of LT cable 1100 volts grade of cross sectional area 240 Sqmm 3.5 Core as per IS-7098 (Part-I) 2011, XLPE insulated aluminium conductor heavy duty served with an inner sheathing PVC tape, galvanized steel strip or wire armoured with an overall PVC sheathing laid in trenches, fixed along the poles or passed through GI pipe using clamps wherever required laid under floors, road etc fixed concealed in walls encased in GI pipe connecting with suitable size of lugs and cable glands etc, each cable termination is to be made with suitable size of cable glands and aluminium thimbles (for junction boxes, security lights, LT panels etc) for incoming and outgoing cables including taking out U/S, burnt LT cable from the trench in any depth/perimeter wall, complete all as specified and as directed. (Note : MS clamps with nuts, bolts washer etc shall not be measured and paid separately under relevant items)

All as per Ser Item No 2 here in above but cross sectional area 150 Sqmm X 3.5 core.

All as per Ser Item No 2 here in above but cross sectional area 120 Sqmm X 3.5 core.

All as per Ser Item No 2 here in above but cross sectional area 95 Sqmm X 3.5 core.

All as per Ser Item No 2 here in above but cross sectional area 70 Sqmm X 3.5 core.

All as per Ser Item No 2 here in above but cross sectional area 50 Sqmm x 3.5 core.

All as per Ser Item No 2 here in above but cross sectional area 35 Sqmm X 3.5 core.

All as per Ser Item No 2 here in above but cross sectional area 25 Sqmm X 4 core.

All as per Ser Item No 2 here in above but cross sectional area 16 Sqmm X 4 core.

All as per Ser Item No 2 here in above but cross sectional area 10 Sqmm X 2 core.

Taking down street light fitting, flood light fittings 30/ 60/ 90/ 120/ 250 watts any type any wattage from Street tubular pole/PCC Poles/Perimter wall poles dismantling and checking out serviceability of part/decarburising at the end of joint of PVC/XLPE cable and fixture's connector cable, circuit such as drivers, MCCB etc. replacement of unserviceable parts with new parts including soldering with existing circuit board, reassembling and refixing in position including conneting, testing, complete all as specified and directed. (All UNSV accessories shall be replaced under respective items). Note: Connected T&P/Manpower/safety tools i.e ladder, crane, Electrician, helper, gloves, safety belt,helmet etc will be provided by the contractor.

Supply and fixing in replacement of driver suitable for LED light fitting 15 to 30 Watt, complete all as specified and directed.

Supply and fixing in replacement of driver suitable for LED light fitting 45/60 Watt, complete all as specified and directed.

Supply and fixing in replacement of driver suitable for LED light fitting 90/120 Watt, complete all as specified and directed.

Supply and fixing in replacement of existing unsv street light fittings with LED street light fitting 45 Watts, IP 66, having pressure die cast alumnium alloy housing with heat resistant toughned glass with individual peanut LED lenses and Driver shall be IP-66 for water protection, including surge protection device 5 KV including making connections with PVC insulated and sheathed three core multi stranded aluminium conductor cable of size 1.5 Sqmm, complete all as specified and directed.

Supply and fixing in replacement of existing unsv street light fittings with LED street light fitting 70 Watts, IP 66, having pressure die cast aluminium alloy housing with heat resistant toughned glass with individual peanut LED lenses and Driver shall be IP-67 for water protection, including surge protection device 5 KV including making connections with PVC insulated and sheathed three core multi stranded aluminium conductor cable of size 1.5 Sqmm, complete all as specified and directed.

Supply and fixing in replacement of existing unsv street light fittings with LED street light fitting 90 Watts, IP 66, having pressure die cast aluminium alloy housing with heat resistant toughned glass with individual peanut LED lenses and Driver shall be IP-67 for water protection, having surge protection device 10 KV, including making connections with PVC insulated and sheathed three core multi stranded aluminium conductor cable of size 1.5 Sqmm complete all as specified and directed.

Supply and fixing in replacement of existing unsv flood light fittings with LED flood light fitting 60 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 KV and Driver shall be IP-67 for water protection, including making connections with PVC insulated and sheathed three core multi stranded alumn conductor cable of size 2.5 Sqmm complete all as specified and directed.

Supply and fixing in replacement of existing unsv flood light fittings with LED flood light fitting 100 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 KV and Driver shall be IP-67 for water protection, including making connections with PVC insulated and sheathed three core multi stranded alumn conductor cable of size 2.5 Sqmm complete all as specified and directed.

Supply and fixing in replacement of existing unsv flood light fittings with LED flood light fitting 120 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 KV and Driver shall be IP-67 for water protection, including making connections with PVC insulated and sheathed three core multi stranded alumn conductor cable of size 2.5 Sqmm complete all as specified and directed.

Supply and fixing in replacement of existing unsv flood light fittings with LED flood light fitting 150 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 KV and Driver shall be IP-67 for water protection, including making connections with PVC insulated and sheathed three core multi stranded alumn conductor cable of size 2.5 Sqmm complete all as specified and directed.

Supply and fixing in replacement of existing unsv flood light fittings with LED flood light fitting 200 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 KV and Driver shall be IP-67 for water protection, including making connections with PVC insulated and sheathed three core multi stranded alumn conductor cable of size 2.5 Sqmm complete all as specified and directed.

Supply and fixing in replacement of existing unsv flood light fittings with LED flood light fitting 240 Watts, IP 66, having pressure die cast alumn alloy housing with heat resistant toughned glass with individual LED lenses, having surge protection device 10 KV and Driver shall be IP-67 for water protection, including making connections with PVC insulated and sheathed three core multi stranded alumn conductor cable of size 2.5 Sqmm complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m depth and getting out for laying of underground cable etc in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm thick in any type of soil, complete all as specified and directed.

Removing of excavated soil to a distance n.exc 50 metre and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed.

Supply and Laying of sub class 'B' bricks, old size , locally available in trenches for protection of underground cable, complete all as specified and directed.

M&L for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of sand after laying the cable and punned the same upto 18 cm, complete all as specified and directed. Note:- Only punned thickness shall be measured and paid.

Supply and fixing junction box IP 65 with metric knockouts for cable entry up to 25 Sqmm, Box size 205x255x112 mm with terminals including MCB SP 6A and fixed on pole with MS clamps including two coat of Aluminium paint over one coat of red oxide primer, complete all as specified and directed.

Supply and fixing junction box IP 65 with metric knockouts for cable entry up to 50 Sqmm, Box size 255x355x122 mm with terminals including MCB 4 pole 63A and fixed on pole with MS clamps including two coat of Aluminium paint over one coat of red oxide primer, complete all as specified and directed.

M & L for painting of steel tubular LT poles with two coats of aluminium paint including painting to cross arms and clamps etc including preparation of surfaces by scrubing and cleaning with wire brush, complete all as specified and directed.

M & L for marking of pole serial number with black luminous words on luminous yellow round sticker as per sample, complete as per directed & specified.

S&F in replacement timer switch, 32 A, 240 Volts, single phase, complete all as specified and directed.

M&L for electric / gas welding in panel / pole/ any other work, complete all as specified and directed.

S&F in replacement of unsv 1100 volts grade, 1.5 Sqmm 3 core, PVC insulated and PVC round sheathed multicore bright annealed bare copper conductor cable including suitable size of copper lugs as per IS:694/1990, complete all as specified and directed .

S&F in replacemnt of PVC insulated and sheathed circular flexible copper conductor 1100 volts, of size 2.5 Sqmm 3 core from looping box to street light/panel wiring circuits complete all as per site requirements, complete all as specified and directed.

S&F in replacement of GI pipe of size 50 mm dia, light grade, for housing/protection to the LT cables, complete all as specified and directed.

S&F in replacement of street light bracket made out of light grade GI Pipe 32 mm nominal bore, 1.2 metre long tilted to 30 degree angle on 4 metre length along with flat iron clamp of 40 x 4 mm size 750 mm long duly drilled made to shape the bracket complete with nut bolt and washers including applying two coats of aluminium paint over a coat of red oxide primer, complete all as specified and directed.

Disconnecting/unscrewing of all electrical connections of the UNSV flood light fitting from a height upto 12 m and S&F, commissioning & testing the high bay light of 80 Watt capacity suitable for 240 volts, 50 HZs single phase power supply, fabricated with die cast aluminium with high power LEDs as light source, IP 65 complete with all standered accessories, complete all as specified and directed.

S&F in replacement of MCB SP 6A-32A, 240V, 10kA breaking capacity, complete all as specified and directed.

S&F in replacement of MCCB TP 63A, 415V, 16kA breaking capacity, complete all as specified and directed.

M&L for repairing broken coping of pole foundation by using PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in pole base upto the height of 50 cm from the ground level and 600mm dia including necessary form work and painting with oil bound distemper over a coat of primer and finishing the surfaces, complete all as specified and directed.

S&F in replacement of MCCB 4 pole, 415V, fixed thermal and magnetic setting of capacity 63Amp, breaking capacity 16 KA, complete suitable for fixing inside of LT Panel/feeder pillar, complete all as specified and directed.

S&F in replacement street light timer switches, including testing and commissioning of NATURE switch for outdoor lighting automation using space grade sensors and an advances micro controller suitable for outdoor use having features automatic switching ON sunset, Automatic switching OFF at dawn, NO clock setting & time settings wide operating voltage range, high voltage trip and auto reset having specification 230 Volts,50 Hz complete with all connected accessories of rating 12 KW 3 phase, current range 40 Amps, complete all as specified and directed.

Servicing of High mast of any height and description, opening the mechanical hoisting / lowering accessories, steel wire bobbin, replacing the unserviceable meshing gear, easing the steel rope movements, checking the locking mechanism, replacing of oil ,greasing complete and checking for smoothing operation of the mast, complete all as specified and directed.

Dismantling the AC motor of High mast and taking out to workshop for re-winding upto 3 HP motor, removing the burn tout windings, re-winding the same with super enamelled copper wire of existing gauge, varnishing and oven drying, assembling and testing in position complete all as specified and directed by Engr-in-charge.

Dismantling of old concrete poles of any size, complete all as specified and directed.

Supply and erect of steel tubular swaged pole complete with cast iron base plate final taper plug, bolts, nuts & screws as specified, 8.5m long type 410, SP-22 including two coats of aluminium paint over one coat of red oxide primer, complete all as specified and directed.

M&L for plain cement concrete 1:3:6, type C2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B1 (using 40 mm graded crushed stone aggregate) for coping including form work etc, complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8, type-D2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass- concrete, complete all as specified and directed.

M&L in replacement of clamps fabricated of flat iron 40 mm x 5 mm x 5mm drilled, welded, bent to shape made in holes suitable for steel tubular/PCC poles including nuts, bolts/washers including two coats of aluminium paint over one coat of primer, complete all as specified and directed.

Supply and fixing in replacement of GI clamps fabricated of GIalvanised iron of size 70 mm x 15 mm x 2mm drilled on both ends, suitable for mounting the PVC/XLPE cables on perimeter wall including preperation and painting two coats of aluminium paint over one coat of primer, complete all as specified and directed.

Material and labour for earthing complete with galavanised steel earth plate electrode of size 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 m deep below gound level with top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised steel earth strip of size 32x6 mm by means of bolts, nuts, check nuts and washers of galavanised iron/steel and conneted to main control board as directed and including proivison of concrete pit in PCC (1:2:4) type B1, pre cost RCC earth pit cover reinforced with 8 mm dia TMT bars @ 150mmc/c of size 54cmx54cmx8cm with two handle for lifting made out of 8mm dia MS bar, provision of funnel, wire mesh, 20mm bore galavanised steel tubing (med grade) for watering. Charcoal 250 Kg and salt 200 Kg in alternate layers, 40mm bore galavanised steel tubing, light grade, for protection of earth lead connection including necessary excavation and earth work and testing complete all as shown on electrical plate No 3 of SSR Part-I, complete all as specified and directed. Note : Earth strip and protection pipe upto 7.5m is included in the unit rate of this item. Contractor shall quote his rate accordingly.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismentling/taking down items) worth Rs 82,550.00 during AOC. Note :- Tenderers shall not quote for this Schedule.

M/S LUCKY BUILDERS

M/S A.R.TANTARY

M/s Jaipal Associates

M/S UTA MOTORS

M/S M.Y Enterprises

M/S GHULAM MOHAMMAD AND CO.

M/S KHAN ENTERPRISES