Construction of Boundary Wall at Store Land

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil As Per DSR No . 2.6.1(Excluding Cost of GST)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : in 1:4:8 (1 cement : 4 coarse sand derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per DSR No. 4.1.8 . Excluding Cost of GST)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) As Per DSR 6.1.2Excluding Cost of GST)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : in1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) As Per DSR 5.1.2 Excluding Cost of GST)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. As Per DSR 10.1 Excluding Cost of GST)

Centering and shuttering including strutting, propping etc. and removal of form for foundation, footing, base of columns, pillars, piers, etc. As Per DSR 5.9.1( Excluding Cost of GST)

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) As Per DSR 16.53 (Excluding Cost of GST)

Steel work in built up tubular round, square or rectangular hollow tubes etc.) trussess etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes. As Per DSR 10.16.1( Excluding Cost of GST)

12 mm cement plaster on brick work with cement mortar of mix (upto 10 mtr height from Ground level) (II) 1:4 (1 cement : 4 Coarse sand) As Per DSR 13.4.1 (Excluding Cost of GST)

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. including cost of all material, Labour, T&P etc. complete required for proper completion of the work. As Per DSR 13.26 (Excluding Cost of GST)