Annual repairs and maintenance of Lab water Supply and Distribution management at Kodihalli Campus NAL Bangalore

WOOD AND P.V.C WORK

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

DISMANTLING AND DEMOLISHING

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

MARKET RATE ITEMS

Supplying and Stacking Building Materials Manufactured Sand (M SAND) conforming to IS Specifiactions at site from approved sources as per the directions of Engineer-in-charge.

Supplying and Stacking Building Materials (FPS Bricks of class designation 50) conforming to IS Specifiactions at site from approved sources as per the directions of Engineer-in-charge.

Supplying and Stacking Building Materials (Portland Cement of 43 grade ) conforming to IS Specifiactions at site from approved sources as per the directions of Engineer-in-charge.

Supplying at site of Chlorinated Polyvinyl Chloride (CPVC) Pipe of approved quality as per directions of Engineer in charge. 20mm Outer Dia.

Supplying at site of Chlorinated Polyvinyl Chloride (CPVC) Pipe of approved quality as per directions of Engineer in charge. 25mm Outer Dia.

Supplying at site of Chlorinated Polyvinyl Chloride (CPVC) Pipe of approved quality as per directions of Engineer in charge. 65mm Outer Dia.

Supplying PVC/SWR pipes for sewer lines - Type :B of ISI :13592 65mm Dia as per directions of Engineer In Charge.

Supplying PVC/SWR pipes for sewer lines - Type :B of ISI :13592 75mm Dia as per directions of Engineer In Charge.

Supplying of Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm as per direction of Engineer in Charge.

Supplying of Flexible PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm as per direction of Engineer in Charge.

Supplying of Poly Vinyl Chloride (PVC) Tap/Bibcock short body of approved quality and make as per directions of Engineer In Charge.

Supplying of Poly Vinyl Chloride Tap/Bibcock of long body approved quality and make as per directions of Engineer In Charge.

Supplying of Unplasticised P.V.C. Connection pipe with brass union 60 cm long 15mm bore of approved quality and make as per directions of Engineer In Charge.

Supplying of Teflon Tape of one box(10 nos) of Approved quality as per directions of Engineer in charge.

Supplying of white vitreous china china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flusihng cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps including brackets etc. complete set as per directions of Engineer in charge.

Supplying of P.V.C Low level flushing cistern with manually controlled device (handle lever) confoming to IS : 7231, 10 litre capacity - white. as per directions of Engineer in charge.

Supplying of solid plastic seat with lid for pedestal type WC pan completed.White solid plastic seat with lid as per directions of Engineer in charge.

Supplying of Spindle Full Round (heavy) of approved quality as per directions of Engineer In Charge.

Supplying of Spindle Half Round (heavy) of approved quality as per directions of Engineer In Charge.

Supplying of CP Health Faucet Set of approved quality and make as per directions of Engineer In Charge.

Supplying of CP Health Faucet Gun of approved quality and make as per directions of Engineer In Charge.

Supplying of CP Health Faucet Set of long length flexible tube of approved quality and make as per directions of Engineer In Charge.

Supplying of CP Short body Tap approved quality and make as per directions of Engineer In Charge.

Supplying of CP pillar cock for wash basin approved quality and make as per directions of Engineer In Charge.

Supplying of Chlorinated Polyvinyl Chloride (CPVC) Gate Valve of approved quality and make as per directions of Engineer In Charge. 20mm dia

Supplying of Chlorinated Polyvinyl Chloride (CPVC) Gate Valve of approved quality and make as per directions of Engineer In Charge. 25mm dia

Supplying of Float Valve Brass 20mm approved quality and make as per directions of Engineer In Charge.

Supplying of Float Valve Brass 25mm approved quality and make as per directions of Engineer In Charge.

Supplying of 50mm Foot Valve Brass approved quality and make as per directions of Engineer In Charge.

Supplying of pressmatic push cock long body of approved quality and make as per directions of Engineer In Charge.

Supplying of urinal push cock male type of approved quality and make as per directions of Engineer In Charge.

Supplying of urinal spreader long neck of approved quality and make as per directions of Engineer In Charge.

Supplying of urinal spreader (mold type) of approved quality and make as per directions of Engineer In Charge.

Supplying of Jaquar make semi pedestal type Wash Basin of approved quality and make as per directions of Engineer In Charge.

Supplying of Jaquar make Urinal Sensors flushing valve of approved quality and make as per directions of Engineer In Charge.

Supplying of C.P Two way angle cock of approved quality and make as per directions of Engineer In Charge.

Supplying of C.P angle cock of approved quality and make as per directions of Engineer In Charge.

Supplying of CPVC Solvent 118 ml of approved quality and make as per directions of Engineer In Charge.

Supplying of PVC Solvent 100 ml of approved quality and make as per directions of Engineer In Charge.

Supplying of White Cement of approved quality and make as per directions of Engineer In Charge.

Supplying at Site Float glass panes of 4.0mm thick for windows as per Directions of Engineer in charge.

Supplying of Powder Coated Tower Bolts 150mm of approved quality and make as per directions of Engineer In Charge.

Supplying of Powder Coated Tower Bolts 100mm of approved quality and make as per directions of Engineer In Charge.

Supplying of Powder Coated Door Hinges 100mm of approved quality and make as per directions of Engineer In Charge.

Supplying of Lappam of approved quality and make as per directions of Engineer In Charge.

Supplying of Powder coated D Shape Door Handles 150mm of approved quality and make as per directions of Engineer In Charge.

Supplying of Fly proof stainless steel of wire mesh-4'x50' roll of 0.5mm dia of approved quality and make as per directions of Engineer In Charge.

Supplying of bright finished brass night latch of approved quality and make as per directions of Engineer In Charge

Supplying of Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors of approved quality and make as per directions of Engineer In Charge.

Supplying of FOSROC NITOBOND AR-1 of approved quality and make as per directions of Engineer In Charge.

Supplying of STP Shali Bond CS of approved quality and make as per directions of Engineer In Charge.

Supplying of Enamel paint of approved quality and make as per directions of Engineer In Charge.

Supplying of ( at all floor levels) Polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangrment and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support for tank.

Engaging of mechanical excavator (JCB) for site clearence, earth levelling at various location as per the directions of Engineer-in-charge. (The actual working hours of JCB will be recorded for payment).

Supplying of the SS plantex double soap dish of the approved quality and make as per the direction of the Engineer In Chrage.

Supplying of the SS Grab bar of 406mm length (16 inch) of the approved quality and make as per the direction of the Engineer In Chage.

Supplying of the SS 450mm length Towel rod of the approved quality and make as per the direction of the Engineer In Chage.

Monthly Maintenance Charges for water supply and distribution management of kodihalli campus like operation and maintenance of Pump houses, periodical cleaning of over head tanks & under ground water tanks, repairs and maintenance of water supply lines, recording water meter readings and coordination with BWSSB authorities for better water supply and distribution as per the direction of Engineer in charge and scope of work mentioned in Annexure - III

Monthly maintenance charges for maintenance of lab buildings of plinth area 70,000 sqms. towards civil. Water supply, sanitary & plumbing related works, at kodihalli campus NAL, Bangalore as per the direction of Engineer-in-charge and scope of work mentioned in Annexure-III.