Repair to leakage seepage roofing sheet false ceilingh water proofing treatment to roof plastering to chajjas and facia and wall panelling and other connected works at Sewar fort under GE Bharatpur

Amount

M&L for 15 mm thick rendering surface other than fair face of brick-work or stone masonary surface with cement mortar 1:4 finished even & fair complete all as specified & as directed

Ditto as above item no 1 but on fair faces of brick work or concrete surface with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified & as directed

M&L for rendering 15 mm thick in CM (1:4) on stone masonry surfaces or External surface of brick-work or on one side of lathing upto 10 m height ,finished fair & even Including taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water complete all as specified & as directed

Ditto as above item no 3 but in CM (1:6)on Internal faces finished even and smooth without using extra cement complete all as specified & as directed

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of cement concrete surfaces of ceiling of chajjas/roof protection etc including finishing the surface even and smooth without using extra cement & Taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water all as specified complete all as specified and as directed

M&L for demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed

M&L for fixing of sunroof stone (of approved quality) of thikness 40mm, wherever required as per approved design, including inserting/fixing of stone up to 9m height.Complete all as spcfd & as directed . Note :- Quoted rates are includes cost of material , ,safety measures/ use of specified equipments for workers of building required to complete the work at 9m heights & including all leads complete all as specified & directed

Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles Complete all as spd and directed by Engr-in-Charge.

M&L Brick work with sub class 'B' old size bricks bricks straight or cured on plan exceeding 6 m mean radius built in cement mortar 1:6

Ditto Item No 09 but except bricks

M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of wall primer akali resistant priming paint with hand roller complete all as specified and as directed

M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of Priming with alkali resistant priming paint with hand roller complete all as specified and as directed by Engr-in-Charge.

M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified & as directed

M&L for three coats of white wash on new plastered or unplastered surfaces of walls including prepration of surfaces complete all as specified & as directed

Demolition of cement concrete unreinforced in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified and as directed ..

M&L for plain cement concrete 1:4:8 type D2 (40 mm graded aggregate) as in foundations, filling and mass concrete.

M & L for Endura Designer Collection Series of Jhonson Tiles ,Kajaria or somani tile of size 300x300x10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

M&L dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) , removing serviceable tiles to store and rubbish off the premises all as specified.

M&L Glazed ceramic Tiles,in verticle surface 350X250X7mm/ 450X300X7mm set & jointed in neat cement slurry and pointed in white or colour cement to match the existing surface over and including 15mm thick rendering in CM 1:4 complete all as specified & directed.

M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in coloured cement over & including 15mm thick rendering in CM 1:4.

M&L for Vitrified Light Shade ceramic tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm , over & including 15 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match.

Cutting, polishing to existing Kota/ marble flooring,(three cuttings and mirror polishing) including levelling certain places to Kota/ marble floor & necessary repair work complete spcfd & as directed By Engineer-in-Charge at site

Demolition and breaking up drain pipes (SGSW, AC or reinforced cement) set in cement mortor internal dia of pipe 100mm complete all as spcfd & as directed .

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as spcfd & as directed .

-ditto- Item No 24 but 75mm dia complete all as spcfd & as directed .

S&F in repair vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting stand complete complete all as spcfd & as directed .

S&F in repair bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore, complete all as spcfd & as directed .

S&F in repair of pillar tap, cast copper alloy with capstan heads,chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as spcfd & as directed .

S&F in repair chromium plated15mm bore dia stop valve/Angle valve cast copper alloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as spcfd & as directed ..

S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high level 32mm dia complete all as specified and directed .

S&F in repair of 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, ISI marked complete all as spcfd & as directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as spcfd & as directed .

S&F Rolled sections as in as in post ,roof trusses (framed), trussed, purlins, crane gantries, rails , fastenings , heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' including cutting,welding etc complete all as spcfd & as directed .

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

M&L of PCC 1:3:6 type C-2 ( 40 mm graded aggregates ) as in foundations filling and mass concrete complete all as spcfd & as directed .

Dismantling corrugated or semi corrugated Asbestos cement sheets in roof coverings complete all as spcfd & as directed ..

M & L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as spfd & directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as spcfd & as directed .

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified complete all as spcfd & as directed .

S&F of three layred 1000 ltr ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm brass ball valve Including dismantling of existing ater tank of 1000 Ltr capacityl as specified & directed in ssr part-I

S&F of 500 ltr ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve Including dismantling of existing water tank of 500 Ltr capacity all as specified & directed in ssr part-I

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as specified & as directed (also including the rate for disposal of building rubbish/ malba of dismantled or waste material collected after demolition of existing treatment & dumping for lead upto 1km for all lifts)

M&L for 40mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) in roof covering , benching , etc & finished even and rough all as per directed complete all as specified & directed

M&L for screed bed or bedding layer of 15 mm thick cement mortar 1:4, for floor finished even & smooth without using extra cement complete all as specified & directed (mixed with WPC) Note :- WPC Shall be measured and paid seprately.

Supply only water proofing compound ISI marked complete all as specified & directed

S&F APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm , reinforced with polyster non-woven fabric (weighing not less than 150 gm/sqm and upper side of membrane thermally insulated with white mineral gravel finish, informaly embadded during manufacturing process shall only be used. It shall be laid by torch application,side overlaps shall be 75mm and the ends shall be 100mm and all over laps shall be sealed by torch application including applying a coat of cold applied bitumen primer conforming to IS:[email protected]/sqm & applied a Hot blown coat of bitumen layer spread over primer @ 2.0 Kg/Sqm complete all as specified & directed

S&F in repair for PVC wall panelling in repair with panel of 300 mm x 4 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angel fixed with solvent cement complete all as specified as manufacturer's Instructions complete all as specified & directed

M&L for 15mm bore galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking up & down the existing GI tubing

All as per Item No 48 above but 20mm bore

Taking up or down old serviceable 15mm bore GI pipe & Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, trenches etc ) including cleaning complete all as specified & as directed.

All as per Item No 50 above but 20mm bore

S & F in repair of vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor with PCC, Lime concrete bedding complete all as specified & as directed.

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame).

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame)

S & F powder coted Anodised Aluminium frame for door,windows,vantilators with one or more rebates including joining cleats for fixing etc complete all as specified complete all as specified & as directed .

S & F powder coated Aluminium door shutter,aluminium section weighing 0.55kg/m including necessary joining cleats glazing clips,rubber neoprene packing handles 2 Nos in each door,hinges anodized aluminium snap beading screw etc complete all as specified complete all as specified & as directed.

S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packng,anodised aluminium snap beading,screws,anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long Nos suitable handle Nos complete all as specified complete all as specified & as directed .

S&F Sheet glass ordinary quality 5.5 mm thick and glazing with oil putty in squares n. exc. 0.5 sqm in each pane

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified & as directed.

S&F in repair Aluminium extruded section body door closer hydranlicelly regulated designation no 3 universal type suitable for door shutter up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation, boards/slabs/blankets, any thickness, including cover fillets and frame work complete all as specified & as directed .

M&L for providing and fixing Gypsum Board 8 to 10 mm thick in ceiling fixed with screws as per manufacturers instructions complete all as specified & as directed.

S&F 4mm thick Everest designer E-Board fixed or laid/inserted to timber/GI/Aluminium ceiling frame work with screws complete all as directed by Engr-in-Charge

S&F anodised aluminium snap grid frame work of size 605x605mm for false ceiling complete all as specified & as directed.

S&F hangers 6mm dia. G.I (up to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and hold fasterners 12.5mm dia 40mm long.complete all as specified & as directed.

S&F for Solid PVC door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

Supplying & fixing in the frames at site factory madeFactory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing

M/S MAMTA CONSTRUCTIONS

M/s Gupta Traders

VASUNDHARA AND COMPANY

M/s Ranaji Construction Co

GANGA CONSTRUCTION

Tulsi Enterprises

M/s K Prashad and Sons

yash kumar and co