Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹19.9 L+₹1.1 L (5.58%)Rejected-Finance SUBAN BAZAAR DIGLIPUR NORTH ANDAMAN 744202 | DIGLIPUR | NORTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744202 | L2 | Rejected-Finance HIGHEST BIDDER | |
| 3 | L3₹19.9 L+₹1.1 L (5.62%)Rejected-Finance MADHUPUR DIGLIPUR NORTH ANDAMAN 744202 | DIGLIPUR | NORTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744202 | L3 | Rejected-Finance HIGHEST BIDDER | |
| 4 | L4₹20.2 L+₹1.3 L (7.09%)Rejected-Finance MES WORKS SITE CARNICOBAR ANDAMAN NICOBAR ISLAND | CARNICOBAR | NICOBAR | ANDAMAN AND NICOBAR ISLANDS | 744301 | L4 | Rejected-Finance HIGHEST BIDDER | |
| 5 | L5₹22.2 L+₹3.4 L (18.1%)Rejected-Finance 254 MG ROAD LAMBA LANE JUNGLIGHAT PORT BLAIR SOUTH ANDAMAN ANDAMAN AND NICOBAR ISLANDS 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L5 | Rejected-Finance HIGHEST BIDDER |
Tender Value
₹24.5 L
EMD Value
₹49,000
Closing Date
13 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Saurabh Prashar, Offg Garrison Engineer
GE (South) Diglipur RK Gram Diglipur North Andaman 744202
PERIODICAL SERVICES TO CERTAIN BLDGS AND REPAIR / REPLACEMENT OF SEWAGE LINES AND CLEANING OF SEWAGE SYSTEM AT 2U DET UNDER GE (S) DIGLIPUR
2023_MES_633046_1
8950/E8
Open Tender
Civil Works
Item Rate
270 days
DIGLIPUR
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
GE (South) Diglipur
₹49,000
Yes
17 Feb 2024
16 Dec 2023
15 Jan 2024
16 Dec 2023
13 Jan 2024
30 Dec 2023
Amount
M&L for preparing plastered or unplastered old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed by Engr-In-Charge.
M&L for preparing plastered or unplastered old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed by Engr-In-Charge.
M&L for preparing plastered or unplastered old decorated surfaces of walls and applying one coat of cement based paint complete all as specified and directed by Engr-In-Charge.
M&L for washing, rubbing down and stopping of distempered and painted surfaces of walls and applying one coat of distemper oil emulsion paint, white or tinted complete all as specified and directed by Engr-In-Charge.
M&L for preparing old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-In-Charge.
M&L for preparing old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-In-Charge.
M&L for complete removal of existing treatment on walls and applying two coats of distemper oil emulsion paint, white or tinted over a coat of alkali resistant priming paint complete all as specified and directed by Engr-In-Charge.
M&L for preparation of old painted surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel (ordinary tint) paint on plastered surfaces, stone, brick, concrete surfaces etc complete all as specified and directed by Engr-In-Charge.
M&L for preparing plastered or unplastered old decorated surfaces of walls and applying one coat of antifungal exterior emulsion weather proof paint complete.
Clearing away all grass, vegetation, saplings, shrubs, brush-wood, under-growth, roots and trees not exceeding 30 cm girth (measured one metre above ground level) for making approach to septic tanks, around manholes, manhole to manhole for sewage lines and removing rubbish upto a distance of 50 metres all as specified and directed by Engr-in-charge.
Excavating in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for laying drain pipes or for manholes etc. area not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.
Excavating in trenches, not exceeding 1.5 mtr wide and exceeding 1.5 mtr but not exceeding 3 mtr in depth; for laying drain pipes or for manholes etc. area not exceeding 10 Sqm on plan and getting out in soft/ loose soil complete all as specified and directed.
Returning, filling in in soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engr-In-Charge.
Removing excavated soil material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-In-Charge.
Demolition and breaking up drain pipes of 150 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including bedding, haunching complete all as specified and directed.
M&L for 150 mm internal dia salt-glazed stoneware drain pipes, grade 'A' laid in trenches/ manhole walls and jointed in CM 1:3 complete all as specified and directed by Engr-In-Charge.
M&L for 150 mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars in CM 1:3 complete all as specified.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removal of debris to a distance exceeding 500 mts and depositing where directed.
M&L for PCC (1:4:8) Type D2 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-In-Charge.
M&L for PCC 1:3:6 Type C2 (using 40mm graded granite stone aggregate) concrete bed to drain pipes including packing under, and haunching against the sides of pipes 150 mm bore after they are laid and tested all as specified and directed.
Demolition of brickwork or stone/ boulder masonry or PCC block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris to a distance exceeding 500 mts and depositing where directed.
M&L Pre-cast cement concrete Type C1, 1:3:6 (using 20mm graded crushed granite stone aggregate), block masonry with solid blocks, exceeding 10 cm in width with minimum compressive strength of 50 Kg/ Sqcm and setting in cement mortar 1:6 complete all as specified and directed by Engr-In-Charge.
M&L for rendering 15 mm thick CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified. Note: If Water proofing compound is mixed, WPC shall be measured and paid separately.
Supply only Integral waterproofing compound.
M&L for PCC (1:2:4) Type B1 (using 20mm graded granite stone aggregate) as in coping, benching of manholes etc, and including necessary formwork all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and facilitate to cut reinforcement and removal of debris to a distance exceeding 500 mtrs and depositing where directed.
M&L RCC (1:2:4) Type B1 (using 20mm graded granite stone aggregate) as in slabs supported on walls for septic tanks or similar works etc. complete all as specified and directed by Engr-In-Charge.
M&L for use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), for flat rough finished surfaces of concrete complete all as specified and directed.
M&L for Mild steel TMT steel bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L pre-cast RCC (1:2:4) Type B1 (using 20 mm graded granite stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in CM 1:4, including necessary formwork complete. Note: Reinforcement shall be measured and paid separately.
Cleaning of blockage of sewage lines up to 150 mm bore systematically using necessary tools mechanically and /or manually such as by rodding, passing rope knots, bamboo fanti and disc of required size (with safety measure such as dirt and gas etc), flushing the pipe well with water till clear flow of sewage from both side between two adjacent manhole/grease traps of any depth, taking out sludge in semi liquid stage including all water effluents etc in a closed container and removing all materials from site of work upto a distance exceeding 250 mtr but not exceeding 500 mtr and depositing in earth pit of suitable size including supply and sprinkling bleaching powder and covering sludge with earth after removal of blockage etc complete all as specified and directed by Engineer-In-Charge. Note: Length will be measured throughout the manholes for each time of cleaning.
Cleaning of septic tanks completely by emptying liquid, semi solid, solid foul contents cleaning of inlets, outlets and getting out using suction pumps and filling the foul material into the covered tanks attached to suction pump and removing and disposing the same at a place meant for disposal of foul material outside the Defence area complete all as specified and directed by Engineer-In-Charge.
Cleaning of manholes and removing sludge from manholes of any size depth and depositing the sludge and spreading in low laying areas and covering with lossed soil and as dircted
M&L cleaning of blocked gully trap/ floor trap by flushing with water etc and including removing sludge / mud and replacing the grating cover of any size all as specified and directed by Engr-inCharge
M&L fixed in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl clamps complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl clamps complete all as specified and directed.
S&F in repairs for LDPE PVC pipe 50mm dia pressure rating 6kg/cm2 as in waste piep to wash Basin/Kitchen sink /urinal complete all as specified and directed by Engr-In-Charge.
S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S&F in repair 75mm dia PVC (SWR) double 'Y' junction complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
M & L for 100 mm bore cast iron floor trap with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with solvent cement incl taking down, complete all as specified and directed.
MOHAMMED SAFIQUE
Binod Hawlader
ASHOK BISWAS
Kakolil Trade Agencies
Mrs UMA DEVI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .