NOTICE INVITED TENDER NO - 17 (2021-22), Item No. 3

(A) 1 Rewiring work of Type-V old type Bunglow No. 1, Type-IV Qtr. No. 11, Type-III Qtr. No. 7 & 39, Type-II Qtr. No. 9, A-6 & R-128, of Jal Vihar Colony & office premises of EE (SDW)-XIV / AE (C)-P etc. by carrying out as per following works:- 1.8.1/2 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 1) Group – A.

2) Group – B.

3) Group – C.

1.14.2/3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.14.2 3- 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

1.14.3 3- 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

1.14.4 3- 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

1.14.5 3- 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

1.29/7 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

1.30/7 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

1.25/6 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

1.33/7 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

1.34/7 Supplying and fixing brass batten/ angle holder including connection etc. as required

1.38/8 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

1.41/8 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

1.44/8 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length upt 30cm with 1.5 Sq. mm FRLS PVC insulated, copper conductor single core etc. as required.

1.50/9 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

2.3.3/11 Supply and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 vold, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolator) 1) 12 way double door.

2) 06 way double door.

2.10.1/12 Supplying and fixing 5A to 32 A rating, 24 volt, 10 KA, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. In single pole

2.12.2/12 Supplying and fixing following rating, double pole, 240 volt, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 1) 63 Amp.

Dismantling the old wiring of wooden / PVC capping and making good the damage with cement mortar i/c minor required items complete in all respect for all above accommodations complete in all respect.

ztp corporation

MITTAL TRADING COMPANY

Naman Enterprises

A.V ENGINEERING