CONSTRUCTION OF GINNING PROCESSING UNIT AND COTTON SEED STORAGE SHED 992 SQ MT AND COSTRUCTION OF STORAGE SHED 816 SQ MT

CONSTRUCTION FOR PROCESSING UNIT & STORAGE UNIT

ITEM NO. : 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means... PROCESSING UNIT - 318.064 CUM STORAGE UNIT - 266.016 CUM

ITEM NO. : 2 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means PROCESSING UNIT - 21.384 CUM STORAGE UNIT - 17.496 CUM

ITEM NO. : 3 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. PROCESSING UNIT - 113.143 CUM STORAGE UNIT - 93.520 CUM

ITEM NO. : 4 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc PROCESSING UNIT - 62.992 CUM STORAGE UNIT - 52.248 CUM

ITEM NO. : 5 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc) PROCESSING UNIT - 36.126 CUM STORAGE UNIT - 30.841 CUM

ITEM NO. : 6 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed etc PROCESSING UNIT - 12.267 CUM STORAGE UNIT - 10.167 CUM

ITEM NO. : 7 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete PROCESSING UNIT - 874.304 CUM STORAGE UNIT - 718.624 CUM

ITEM NO. : 8 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complet PROCESSING UNIT - 232.384 CUM STORAGE UNIT - 192.318 CUM

ITEM NO. : 9 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete PROCESSING UNIT - 22.171 CUM STORAGE UNIT - 19.091 CUM

ITEM NO. : 10 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc )PROCESSING UNIT - 19,734 CUM STORAGE UNIT - 16.951 CUM

ITEM NO. : 11 Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete PROCESSING UNIT - 992 SQM STORAGE UNIT - 816 SQM

ITEM NO. : 12 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed etc) PROCESSING UNIT - 4.320 CUM STORAGE UNIT - 4.320 CUM

ITEM NO. : 13 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. PROCESSING UNIT - 5.363 MT STORAGE UNIT - 4.597 MT

ITEM NO. : 14 Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete PROCESSING UNIT - 51.985 CUM STORAGE UNIT - 45.029 CUM

ITEM NO. : 15 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. completePROCESSING UNIT - 261.600 SQM STORAGE UNIT - 228.600 SQM

ITEM NO. : 16 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. PROCESSING UNIT - 417.600 SQM STORAGE UNIT - 363.600 SQM

ITEM NO. : 17 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete .PROCESSING UNIT - 417.600 SQM STORAGE UNIT - 363.600 SQM

ITEM NO. : 18 Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete PROCESSING UNIT - 261.600 SQM STORAGE UNIT - 228.600 SQM

ITEM NO. : 19 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (With mechanical gear) PROCESSING UNIT - 33.600 SQM STORAGE UNIT - 33.600 SQM

ITEM NO. : 20 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing with hot dip zinc coating including fabricating glazing with plain / obscured glass pans 5 mm thick and approved type quality and iron oxidized fixtures and fastening with guard square bars 12 mm 10 cm c/c and oil painting 2 coats etc. complete. c/c.) PROCESSING UNIT - 7.200 SQM STORAGE UNIT - 7.200 SQM

ITEM NO. : 21 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws & bolts, lead & bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.) PROCESSING UNIT - 612 SQM STORAGE UNIT - 546 SQM

ITEM NO. : 1 Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins, platforms, ladders, monorails, staircases ,supports, strengthening of steel members etc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings including painting as per G4/G5/G6 before erection and all materials and labour charges etc., complete and including Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts, nuts, washers, welding and electrodes required for the complete work) PROCESSING UNIT - 16.00 MT STORAGE UNIT - 15.300 MT

ITEM NO. : 2 Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hot-dip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position PROCESSING UNIT - 7.90 MT STORAGE UNIT - 7.70 MT

ITEM NO. : 3 Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories. PROCESSING UNIT - 6.00 MT STORAGE UNIT 6.700 MT

ITEM NO. : 4 Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge- CORNER FLASHING ..PROCESSING UNIT - 115 RMT STORAGE UNIT - 123 RMT

ITEM NO. : 5 Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-Gable flashing PROCESSING UNIT - 110 RMT STORAGE UNIT - 130 RMT

ITEM NO. : 6 Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-Center Ridge PROCESSING UNIT - 98 RMT STORAGE UNIT - 122 RMT

ITEM NO. : 7 """"""""Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc., complete and as directed as per engineer incharge / Construction Manager."""""""" PROCESSING UNIT - 126 RMT STORAGE UNIT - 110 RMT

ITEM NO. : 8 """"""""Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager."""""""" PROCESSING UNIT - 109 RMT STORAGE UNIT - 111 RMT

ITEM NO. : 9 Supply & Fixing of 2mm thk polycarbonate sheets as per drawing & as directed by engineer in-charge. .PROCESSING UNIT - 86 SQM STORAGE UNIT - 86 SQM

ITEM NO. : 10 Turbo Ventilator 24'' PROCESSING UNIT - 10 NOS STORAGE UNIT - 10 NOS

SAND - PROCESSING UNIT - 98.191 CUM STORAGE UNIT - 83.786 CUM

METAL - PROCESSING UNIT - 996.033 CUM STORAGE UNIT - 819.260 CUM

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe PROCESSING UNIT - 168 MTR STORAGE UNIT - 120 MTR

Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete PROCESSING UNIT - 132 MTR STORAGE UNIT - 19 MTR

Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level 1.1Kv cable complete PROCESSING UNIT - 20 MTR STORAGE UNIT - 10 MTR

Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories PROCESSING UNIT - 20 NOS STORAGE UNIT - 12 NOS

Supplying & erecting aviation obstruction light minimum up to 48 watt consisting of yellow painted die-cast aluminium alloy housing with integral LED aviation light comprising of aluminium housing with polycarbonate enclosure complete PROCESSING UNIT - 2 NOS STORAGE UNIT - 2 NOS

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results PROCESSING UNIT - 2 NOS STORAGE UNIT - 1 NOS

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board PROCESSING UNIT - 26 NOS STORAGE UNIT - 16 NOS

Supplying and erecting GI sheet 1.6 mm (16 SWG) having zinc coating of 350 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint PROCESSING UNIT - 18 SQM STORAGE UNIT - 17 SQM

Supplying & erecting G.I. pipe ‘A’ class 25 mm dia. erected for enclosing XLPE armoured cable on wall/pole PROCESSING UNIT - 24 RMT STORAGE UNIT - 21 RMT

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole PROCESSING UNIT - 22 RMT STORAGE UNIT - 22 RMT

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete PROCESSING UNIT - 26RMT STORAGE UNIT - 24 RMT

Supplying & erecting single compression type brass cable glands for 3 to 4 core 6 sq mm /2 to 4 core 10 sq mm for XLPE armoured cable as per specification No PROCESSING UNIT - 35 NOS STORAGE UNIT - 28 NOS

Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box PROCESSING UNIT - 20 NOS STORAGE UNIT - 21 NOS

Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories PROCESSING UNIT - 20 NOS STORAGE UNIT - 10 NOS

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories PROCESSING UNIT - 42 NOS STORAGE UNIT - 24 NOS

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places PROCESSING UNIT - 69 SQM STORAGE UNIT - 67 SQM

Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete PROCESSING UNIT - 24 NOS STORAGE UNIT - 24 NOS

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC lock/wooden board with 3 years warranty PROCESSING UNIT - 63 NOS STORAGE UNIT - 20 NOS

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame PROCESSING UNIT - 14 NOS STORAGE UNIT - 10 NOS

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. PROCESSING UNIT - 2 NOS STORAGE UNIT - 2 NOS

Supplying, erecting, testing and commissioning of 6mm (0.24in) dia PVC Installation Multi core Conference Cable (without connectors) complete as PROCESSING UNIT - 22 RMT STORAGE UNIT - 14 RMT

Supplying, erecting & terminating FR XLPE insulated unarmoured cable, 1100 V 1 core 120 sq. mm. aluminium conductor complete erected with lugs on wall/trusses/ pole or laid in provided trench / pipe PROCESSING UNIT - 23 RMT STORAGE UNIT - 20 RMT

Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable, 1100 V 3 core 6 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe PROCESSING UNIT - 69 RMT STORAGE UNIT - 119 RMT

ITEM NO. : 1 Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. PROCESSING UNIT - 1 NOS STORAGE UNIT - 1 NOS

ITEM NO. : 2 BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity.Impact Value Crushing Value. PROCESSING UNIT - 2 NOS STORAGE UNIT - 2 NOS

ITEM NO. : 3 BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index.. PROCESSING UNIT - 2 NOS STORAGE UNIT - 2 NOS

ITEM NO. : 4 FINE AGGREGATES. Fineness Modulus ( Sieve Analysis ), Silt & Clay Content . PROCESSING UNIT - 3 NOS STORAGE UNIT - 3 NOS

ITEM NO. : 5 CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes). PROCESSING UNIT - 6 NOS STORAGE UNIT - 6 NOS

ITEM NO. : 6 CONCRETE Concrete Mix Design (With all Tests on basic materials) . PROCESSING UNIT - 1 NOS STORAGE UNIT - 1 NOS

ITEM NO. : 7 BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). PROCESSING UNIT - 1 NOS STORAGE UNIT - 1 NOS

ITEM NO. : 8 SOIL / MURUM Liquid limit & plastic Limit. PROCESSING UNIT - 1 NOS STORAGE UNIT - 1 NOS

ITEM NO. : 9 SOIL / MURUM C.B.R. Test ( Field Determination Test) Excluding Transportation As per IS 2720 Part XXXI PROCESSING UNIT - 1 NOS STORAGE UNIT - 1 NOS

ITEM NO. : 10 STEEL BAR TESTING Upto 16 mm (Set of 3 Bars). PROCESSING UNIT - 1 NOS STORAGE UNIT - 1 NOS

Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct

Please Enable Macros to View BoQ information