Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.9 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST | |
| 2 | L2₹15.8 L+₹1.9 L (14.0%)Rejected-AOC C O AKBAR FURNITURE HOUSE MALHAR MORH GARHI UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹17.7 L+₹3.8 L (27.4%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST | |
| 4 | L4₹18.2 L+₹4.3 L (31.3%)Rejected-AOC HOUSE NO 93 WARD NO 8 NEAR ISKON TEMPLE UDHAMPUR J K | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-AOC NOT LOWEST | |
| 5 | L5₹20.0 L+₹6.1 L (43.6%)Rejected-AOC | L5 | Rejected-AOC NOT LOWEST |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
13 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer udhampur
GE (South) Udhampur
CA NO GE S U 59 2022 23 CLEANING AND REPAIR TO SEWAGE LINE SEPTIC TANK SOAKAGE WELL ALLIED WORK TO MD ACCN UNDER AGE BR I OF GE SOUTH UDHAMPUR
2022_MES_563268_1
GE/S(U)-59/2022-23
Open Tender
Civil Works
Works
330 days
GE South Udhampur
As per NIT
9 documents required · 9 mandatory
₹500
GE South Udhampur
₹50,000
11 Feb 2023
15 Nov 2022
14 Dec 2022
15 Nov 2022
13 Dec 2022
29 Nov 2022
15 Nov 2022 - 25 Nov 2022
Amount
Desludging/Dewatering of septic tanck/ soakage wells includibng inlet/outlet chambers removing out all scum, silt residuals sludge (both) organic or inorganic in nature) after plugging the incomming sewage lines through conbined high presure water jetting/suction (vaccum) type machine mounted on LCV/HCV facility of high presure vaccum and removing the same in the tank to a place outside contoment meant for the purpose by local municipality complete all as specified and as directed.
M&L for cleaning of gully traps of any size and removing waste material etc. to a distance n. exc 50m and burrying in pits and re-filling the same complete all as specified and as directed. Note:-The cost for excavation and earth work for pits is deemed to be included in the unit rate.
M&L for cleaning of SGSW/NP-2 pipes of any dia /bore by rodding from manhole to manhole or manhole to septic tank or vice versa and well flushing with water after cleaning and removing waste material etc to a distance n. exc 50m and burrying in pits and re-filling the same complete all as specified and as directed. Note:-The cost for excavation and earth work for pits and taking off manhole cover and placing the same in position after cleaning, is deemed to be included in the unit rate.
M&L for cleaning of man holes n.exc 1.5m deep and removing sludge/waste material etc to a distance n. exc 150m and burrying in pits and re-filling the same complete all as specified and as directed. Note:-The cost for excavation and earth work for pits is deemed to be included in the unit rate.
All as per item No.4 above but exc 1.50m deep and n. exc 3.0m deep complete all as specified and as directed.
M&L for cleaning cast iron pipes 100/75mm bore by rodding with jute bags and well flushing after cleaning complete all as specified and as directed.
M&L for cleaning of floor traps and removing waste material etc to a distance n. exc 50m and burrying in pits and re-filling the same complete all as specified and as directed. Note:-The cost for excavation and earth work for pits is deemed to be included in the unit rate.
M&L for cleaning of 'P' traps in WC and removing waste material etc to a distance n. exc 50m and burrying in pits and re-filling the same complete all as specified and as directed. Note:-The cost for excavation and earth work for pits is deemed to be included in the unit rate.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.
M&L for 100mm thick PCC 1:4:8 type D-2 (40 mm graded crushed stone aggregates) as in sub base complete all as specified and as directed.
Material and labour for sand filling as a cushioning/ bedding complete all as specified and as directed.
M&L for precast coloured machine pressed/vibro mechanically floated interlocking concrete paver block, any shape and size confirming to IS-15658-2006 of 80 mm thick M-40 Grade, with topping of cement mixed with imported pigment Red/yellow . Colour and shape shall be approved by GE (Make : Ultra / Modern / ISI Marked as approved by GE.
M&L for 100mm thick PCC 1:2:4, type B1 using 20 mm graded stone aggregate in floors and finished even & fair complete all as specified and as directed.
Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and as directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified.
All as per item No.15 above but except bricks complete all as specified and as directed.
Walling of random rubble uncoursed, brought up to course well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed.
All as pr item No 17 above but except stone complete all as specified and as directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
M&L for raking out joints/pointing to random rubble or masonry complete all as specified and as directed.
M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and fair without using extra cement complete all as specified and as directed.
M&L for raised pointing to random or polygonal rubble , uncoursed or brought upto courses in CM 1:3 complete all as specified and as directed.
Preparing surfaces newly plastered of walls and applying two coats of cement base paint over a coat of chalk whitening primer complete all as specified and as directed.
Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, rough finished surface of concrete complete all as specified and as directed.
Use and waste of form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls , floors and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exceeding 5 cm wide but not exceeding 10cm wide, surface flat for rough finished surface of concrete complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in copings including necessary form works complete all as specified and as directed.
M&L for precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in cover slabs, (for man holes) chullah hoods, chajjas, shelves and similar articles with plain faces and set in mortar 1:6 complete all as specified and as directed.
Mild Steel TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Mild Steel TMT bars 6 to 8mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Mild steel framed work such as door or gates of angle or other section with gusset plates, rails braces etc., with ornamental and intricate design complete drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging , also fastening and fixing including shop coat of zinc chromate paint conforming to Fe-290 Gde E-165 complete all as specified and as directed.
M&L for providing cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregates as in surface channels and drains complete all as specified and as directed.
M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement , including forms , moulds, mitred/ stopped ends etc. complete all as specified and as directed.
M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.
Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil/strata for foundation, etc, or for shafts, wells, drain pipes and getting out complete all as specified and as directed.
All as per item No.37 above but depth exc 1.5m and n.exc 3.0m complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.
Removing surplus spoil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point complete all as specified and as directed.
M&L for providing cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar internal dia of pipe 200 mm complete all as specified and as directed.
All as per item No.42 above but 150mm dia complete all as specified and as directed.
All as per item No 42 above but 100mm dia complete all as specified and as directed.
RCC pipes 200mm dia, class NP, laid and jointed complete with clamps complete all as specified and as directed.
All as per ser no 45 but 150mm dia complete all as specified and as directed.
M&L for salt glazed stone ware drain pipes of internal diameter 200 mm grade 'A' laid in trenches and jointed complete all as specified and as directed.
M&L for salt glazed stone ware drain pipes of internal diameter 150 mm grade 'A' laid in trenches and jointed complete all as specified and as directed.
M&L for salt glazed stone ware drain pipes of internal diameter 100 mm grade 'A' laid in trenches and jointed complete all as specified and as directed.
M&L for concrete bed to drain pipes of bore 200mm including packing under,and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering and supports complete all as specified and as directed. Note:-(i) Thickness of bed belew barrel of pipe -10 cm (ii) Width of bed :- outer dia of pipe plus 30 cm.
All as per item No.50 above but 150mm dia drain pipes complete all as specified and as directed.
All as per item No 50 above but 100mm dia drain pipes complete all as specified and as directed.
Dismantling cast iron, AC, reinforced concrete and PVC pipe of any description or dia fixed with wall or taking out from trenches complete all as specified and as directed.
M&L 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and as directed.
All as per item No. 54 above but 75mm bore complete all as specified and as directed.
M&L 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to wall complete all as specified and as directed.
All as per item No.56 above but 75mm bore complete all as specified and as directed.
S&F 100 mm bore CI Bend (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.
S&F 75 mm bore CI Bend (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.
All as per item No 58 above but 100mm bore pipe fitted with oval access doors complete all as specified and as directed.
All as per item No-59 above but 75mm bore pipe fitted with ovalaccess doors complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches or in floor complete all as specified and as directed.
All as pr item No 62 above but 75 mm bore pipe complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , fixed to wall complete all as specified and as directed.
All as pr item No 64 above but 75 mm bore pipe complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.
All as per item No 66 above but 75 mm complete all as specified and as directed.
S&F cast iron 'P' or 'S' trap for bore of pipe 100mm complete all as specified and as directed.
M&L for cast Iron floor trap with dia of outlet 75mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified and as directed.
Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore complete all as specified and as directed.
Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and as directed.
M&L for cutting into existing manholes / septic tank / sokage pits for connecting new drains of 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and as directed.
M&L Loose filling with broken bricks of gauge 80 to 150 mm in soakage pits , sokage wells complete all as specified and as directed.
M/S ASHOK KUMAR PACHIALA
sohtra and co
khajuria builders
s l sharma and sons
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .