CERTAIN B/R Repairs, day to day complaints and civil Maintenance works to various location OTM accn and MD Accn at AGE B/R CG Mandapam under GE(I) CG Chennai.

Amount

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified..

Taking down Shutter of any description n. exc 1 sqm & refixing in same opening complete all as specified.

Taking down Shutter of any description exc 2 sqm & refixing in same opening complete all as specified.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in the same opening complete all as specified.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, including making good disturbed surfaces of wall complete all as specified and directed.

S&F 30mm thick Glazed and skeleton shutters,, but divided into squares, with plain, chamfered or roun ded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and directed.

S&F 35mm thick second class hard wood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified.

S&F 30mm thick Flush shutters, solid core construction, withwith particle board core core and plywood face panels,if f both faces is covered with deco rative face veneer with lipping/frame to match on both sides

M&L PCC (1:3:6), type C-1 using 20mm graded stone embedded in hold fasts etc including necessary form work complete all as specified and directed .

Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and as directed.

Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m eachand treated with tar or coal tar black paint complete all as specified and as directed.

S&F powder coated anodised aluminium door, window , ventilator frame including shutter etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size with power coating any colour minimum thickness 50 micron including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws etc including taking down complete all as specified as per manufacturers instructions. Note: Glass Pane and EPDM Rubber beading/gasket will be measured and paid seperatley.

S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters.

Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge complete all as specified and as directed.

S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed by Engineer in Charge

Supply and fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples as in repairs complete all as specified.

S&F Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F 100mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 150mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F 125mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F butt hinges 75mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 Specified and directed.

S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 Specified and directed.

S&F butt hinges 150mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 Specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 4 lever aluminium mortice lock, vertical type size 100 mm complete all as specified.

S&F hydraulically regulated extruded aluminium body door closer designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor complete all as speciifed and directed.

S&F 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S & F as in repairs aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed by Engineer-in-charge.

S & F as in repairs aluminium, anodised, barrel tower bolt of extruded section, 200 mm long, complete all as specified and as directed by Engineer-in-charge.

S & F as in repairs 100 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed by Engineer-in-charge.

S & F as in repairs 150 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repairs Aluminium (extruded section ) Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as in repairs specified and as directed by the Engr-in-charge.

Supply and fix as in repairs Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and directed by Engineer-in-Charge.

Supply and fix as in repairs Butt hinges, 75mm length extruded aluminium anodised alloy with galvanised mild steel hinge pin, anodised and fixed type C-22, complete all as specified and directed by Engineer-in-Charge.

M&L for Cutting holes in brick wall exc half bricks but not exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified.

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item above here-in-before but using old bricks retrieved from demolition under item 47 here in before including cleaning and removal of mortar from old bricks.

M&L for brick work with sub class ‘B’ old size fly ash bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed.

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified.

M&L for external rendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, finished fair and even with using WPC complete all as specified. Note: WPC will be measured and paid seperately

M&L for internal rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

Supply only water proofing compound.

Materials and labour for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjas and similar structural members, cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specified and as directed.

Materials and labour for application of high build polymer cement sand mortar 1:2.5 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 4 ltrs per 50 Kg cement on ceiling / chajja surfaces 10 to 20mm thick in two layers over slurry priming coat of 1 volume Nito bond SBR to 1 volume water, 3 volume fresh cement (5 sqm per litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing to match with the existing complete all as specified and as directed.[ Note : Nitobond SBR shall from Fosroc chemical (India) Pvt Ltd or equivalent chemicals of MC Bouchemics/Beck] complete all as specified and as directed.

Taking up or down, 25mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 15mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 25 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete including taking down existing pipe line all as specified.

Ditto all as per above item No;63 but outer dia is 25mm

ditto all as per above item No;63 but outer dia is 32mm

S&F in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup.

Supply and fix in repair stop valves 20mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed.

S&F in repair Gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed.

Supply and fix in repair 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated screwed down, high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge

S& F in repair Bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

Supply and fix in repairs two way bib cock, brass CP mixture for mixing hot & cold water of Make Jaquar Cat Part No ARI 39041 or equivalent in Cera/ Neycer as approved by GE complete all as specified and as directed by Engineer-in-Charge

S&F PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified.

S&F Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq.cm, 40mm bore as fixed complete all as specified and directed.

S&F Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq.cm, 32mm bore as fixed complete all as specified and directed.

M&L for Forming jambs etc built in cement mortor 1:6 to openings incl cutting toothing and properly bonding into to old work also facing ,jointoing and pointing to match to existing work complete all as specified.

S&F Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

S& F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified.. (Minimum weight 15mm-90gms).

S&F 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed by Engineer in Charge.

S & F 500 Ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and directed by Engineer in Charge.

S&F in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified.

S&F in repair, 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified.

S&F Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

S&F 125mm dia PTMT grating fixed over trap with cement as in repair complete all as specified.

S&F 600mm long towel rail of PTMT fixed to wall with steel screws and PVC rawl plug as in repair complete all as specified.

Dismantling wrought iron/mild steel work in any position complete all as specified and directed

S&F mild steel framed work such as grills/guard bars, cooler stand, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290(Gde-E-165) complete all as specified and directed by Engr-in-Charge.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

S&F in repairs Health Faucet (ABS body) with 8mm dia 1.00m long flexible tube (PVC/Stainless steel coated) and wall hook all as specfied and directed by Engr-in-Charge.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

Supply and fix in repairs vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F Vitreous China bowl urinal flat back, size of 465x355x265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, and flush pipe ) including waste pipe 32mm dia bore fixed in repairs complete all as specified and directed.

S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers38/40mm dia PVC waste pipe and including 38/40mm dia CP waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and directed.

S&F in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe.

Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

S & F in repairs glass corner shelf, Cat No.ACN-CHR-1173 of Jaquar or equivalent in Cera / Neycer, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs plastic seat cover for EWC(Pedestal Pattern) solid type closet set complete all as specified and as directed.

Supply and fix in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."

Supply and fix in repairs water closet pan (Cascade type comode) white, of size 650X360X800mm of Jaquar Cat. No. OPS-WHT-15751 and with flushing Cistern & fittings of Jaquar Cat.No. ZPS-WHT-15201 or equivalent in Cera/ neycer complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stones, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

S & F 4.8 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

S & F in repairs glass corner shelf, Cat No.ACN-CHR-1173 of Jaquar or equivalent in Cera / Neycer, complete all as specified and as directed by Engineer-in-Charge.

S & F MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed

Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc, including cleaning or refixing (measured overall as fixed along the centre line over fittings and accessories)

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified.

Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided.

M&L 15mm thick CM(1:3) with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement. Note:- WPC shall be measured and paid separately.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm)land on primed surface by forced apllication complete all as specified.

M&L PCC (1:5:10) type E2 (using 40mm graded aggregate) in filling under sunken floor portion

M&L 30mm thick PCC(1:2:4) type B-1, using 20mm graded aggregate as in floor finished even and rough to receive top layer complete all as specified

Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises as directed by the Engr-in-Charge.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

M&L for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for glazed coloured ceramic tiles of size 300x200x6.5mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for glazed coloured designer ceramic tiles of size 450x350x7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar

M&L Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar (1:4) with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L for 16-18mm thick coloured marble slab of size not less than 1 Sqm each, machine cut as in cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar (1:4) and pointed in white cement with admixture of pigment to match the shade of marble including cutting, polishing (mirror type) complete all as specified.

M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in CM 1:4 and jointed with ditto as per above item no 74.

Demolition of boarding of any description and in any position complete all as specified.

Supply and fixing 2nd class hard wood 25 mm thick boarding clean sawn with butt joints fixed with nails in any situation, fixed in shelves;Partitions and shelves of built in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and smilar work complete all as specified and as directed

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

S&F 100 long Aluminium tower bolt of extruded section, 100mm length of bolt and fixed with screws, complete all as specified.

S&F 100mm size, Extruded aluminium alloy handles, fabricated type, anodised and fixed with screws complete all as specified.

Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and directed by Engineer in Charge

M&L Cement concrete (1:3:6) type B-1 using 20mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

M&L 60mm thick Coloured interlocking (M-35) cement concrete tiles with grey cement and pigment of approved design & pattern as approved by GE. Complete all as speciifed and directed.

M&L for fine sand bed under paver block, complete all as directed by Engr-in-charge.

M&L for 75mm thick Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base of floors finishes complete all as specified and directed

M&L Hardcore of broken bricks of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engineer- in- Charge.

M&L Plain cement concrete 1:2:4 type B -1 all around the interlocking tiles to fix in position as in kerbs Complete all as specified and directed by Engr-in-charge

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards slabs/ blankets, any thickness, including cover fillets complete all as specified.

M & L fixing of Gypsum Board 6 to 7mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge.

S&F 1.25mm thickness of laths of steel rolling shutters with out ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and directed. Note:- Ball bearing for rolling shutters will be measured separately

S&F Steel rolling shutter of 1.25 mm thickness of laths, without ball baring as specified including top cover ,anchoring rod ,hasp staples rolling grill and one shop coat of primer erected in position as as indicated completed pushpull or manual type complete all as specified as directed. Note:- Ball bearing for rolling shutters will be measured separately

S&F ball bearing for rolling shutters complete all specified and as directed.

S&F bottom plate/patty 3 mm thick 125mm height including side lock at both end for rolling shutter of any type and description, fixed in position complete all as directed by Engr-in-Charge. complete all specified and as directed.

S&F safety lever locks mild steel with 4 levers and fixed in repairs for rolling shutters complete all specified and as directed.

S&F in repair CP central hole basin mixer for wash hand basin including all fittings i.e including connection pipe as per manufaturers specification complete all as specified and directed (Make : Parko or equivalent) complete all as directed.

S&F in repair CP fency type Wall mixer 2 in-1,connecting legs and wall flange complete all as per manufacturer's instruction and as directed (Make : Parko/Prayag or equivalent) complete all as directed by Engineer-in-Charge

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainitalor similar pattern roof coverings complete all as specified.

S&F Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed. Make:Tata Blue Scope/Jindal/Llyod

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed. Make:Tata Blue Scope/Jindal/Llyod

S&F 0.71 mm thick Precoated colour or mill finish Aluminium Ridges plain(500-600mm) of alloy IS designation 31500,Aluminium Alloy(AA) 3004(ISO designation).For colour,coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns,using self drilling/tapping SS screws of size M6, 60 mm long with 3 mm EPDM seal and SS plain washer complete all as specified and directed.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410-W (Gde E-250) Quality 'A' including fabrication, erraction and fixing complete all as specified and directed by Engr-in-Charge.

S&F Rolled sections as in post/pilllars where connected with angle cleats or other connecting plates etc,of Fe 410-W(Gde E-250) Quality 'B' including fabrication,erection and fixing complete all as specified and directed by Engr-in-Charge.

S&F Mild steel plates(plain or chequered) channels,square cut or notched(ordinary and counter sunk) forming holes,without any attachment and fixing complete all as specified and directed by Engr-in-charge.

S&F Mild steel screw bolts(machine made) with hexagonal or square heads at one end and screwed the other,or screwed bolt ends,each screwed end to be fitted with washers and one hexagonal or square nut,exc 5 cm long and n.exc 10 cm long and dia of shank 11 to 15 mm etc complete all as specified and directed by Engineer-in-charge.

M&L for welding in running for thickness of metal to be welded n.exc 6mm, complete all as specified.

M&L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.

M&L for Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

R K BUILDERS

Bidder Name

M/S J P Construction