REPAIR TO PLASTERING, BRICK WORK, FLOORING AND ALLIED WORKS AT MAUDE LINES, CAMP AREA AND PINTO PARK AF STN PALAM UNDER GE (AF) PALAM, DELHI CANTT-10

Amount

S&F for 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layers, hoisted and fixed in position all as specified in SSR Part-I and necessary GI nipple, union etc complete including dismantling of existing tanks upto 4 storied (G+3) building.

S&F for 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layers, hoisted and fixed in position all as specified in SSR Part-I and necessary GI nipple, union etc complete including dismantling of existing tanks upto 9 storied (G+8) building.

S&F in repair 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms).

M&L for 25mm thick cement concrete 1:2:4 type B-1, (20mm graded stone aggregate) as in tank staging, platform and similar works including finishing surface even and fair with using extra cement complete upto 4 storied (G+3) bldg.

S&F for 20mm dia stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete upto 4 storied (G+3) bldg.

S&F for 20mm bore galvanised steel water tubing, ‘Medium Grade’ with all fittings and fixed on walls, ceiling or laid in floors or any other situation including taking up or down unserviceable steel water tubing with fittings and connections etc. complete upto 4 storied (G+3) building.

S&F for 15mm bore galvanised steel water tubing, ‘Medium Grade’ with all fittings and fixed on walls, ceiling or laid in floors or any other situation including taking up or down unserviceable steel water tubing with fittings and connections etc. complete upto 4 storied (G+3) building.

S&F for 100mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears with cement joint and necessary fittings such as bend , branch piece ,tee with or without excess door cap as required fixed to walls including taking down old unserveciable pipes complete upto 4 storied (G+3) building.

S&F for 75mm bore cast iron (sand cast) soil, waste and vent pipes in any length with or without ears with cement joint and necessary fittings such as bend , branch piece ,tee with or without excess door cap as required fixed to walls including taking down old unserveciable pipes complete upto 4 storied (G+3) building.

S&F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed .

S&F in repair 15mm dia two way bib tap,chromium plated, fancy type screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed Shanks and fly-nuts, screwed for iron pipe and fixed complete.

S&F in repair 15mm dia angle valve, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed complete.

S&F in repair soap dish, vitreous china white, approximate size 160x 160x90mm fixing with brass chromium plated screws complete as all specified and directed.

S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and directed Cat Part No.563 of make Jaquar or its equivalent in kohler/ Marc.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, 'D' type, 60cm long between flanges complete all as specified and directed.

S&F in repair 15mm dia bib taps, long body, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule complete.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete.

S&F in repair water closet vitreous china squatting pan,Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) and including with 'P' or 'S trap including' provison of lime concrete bedding complete.

S&F in repair PVC valveless, syphonic action type, flushing cistern, low level 10 litre capacity , white, with inlet, ball valve, float and handle including brackets complete.

S&F in repair PVC connections 15mm size with brass CP nuts of length 450mm.

S&F in repair wash hand basins vitreous china flat back 550mmx400mm size white, first quality, with and including chromium plated waste coupling 32mm size, PVC waste pipe 25mm bore heavy duty, china and plug and porcelain stopper, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer complete to walls all specified.

S&F in repair brass chromium plated shower rose 125 mm size fixed to 15 mm bore iron pipe complete.

S& F in repair 15 mm dia concealed stop cock, cast copper alloy, fancy type, chromium plated screws down high pressure screw both ends for iron pipe or for union.

S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete.

M&L for replacement of 75mm dia cast iron floor/nahani trap with steel grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing after repairs complete.

M&L for applying cement paste mixed with RBR compound (Roff Bond Repair) mixed in ratio as per manufacturer's instructions to stop the seepage, applied in sides of Nahni trap/floor traps, W.C traps, junction of pipes, bends & similar item/joints/ junctions to eliminate the seepage also at the wall area n.exc 1.5 sqm each complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing including removing the debris from site to outside MoD land.

M&L for 25mm thick cement concrete 1: 2 :4 type B-1 (using 20mm graded stone aggregate) as in floor including finishing surface even and fair without using extra cement .

M&L for non skid coloured ceramic tiles (first quality) 7 to 8mm thick (squre or rectangular) area of each tile exc. 0.06 sqm but not exc 0.11 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over & including 15mm thick screed bed in cement mortar 1:6.

M&L for coloured glazed ceramic tiles as in vertical surfaces of size 350x250x7mm/ 450x350x7mm thick (first quality) set and jointed in cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement mortar 1:4.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 (Gde E165) complete.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Pa+nelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stliles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.

S&F for 150mm long aluminium anodised handles, cast type complete.

S&F for 150 mm long aluminium anodized barrel tower bolt of extruded section complete.

S&F for mild steel butt hinges 100mm, medium weight, cold rolled ISI marked.

S&F in repair 20mm dia 16 gauge aluminium powder coated curtain rods including clamps and side knobs all as specified and as directed by Engr-in-Charge

Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as directed.

S&F for 4mm thick sheet glass, ordinary quality and glazing to aluminium/steel/wooden frame with necessary fixing arrangements viz jointing cleats, glazing clips, rubber packing, screws etc. or fixed with oil putty as required complete upto 4 storied (G+3) bldg not exc 0.5 sq. m in each pane.

S&F for 4mm thick figured glass, pin head type and glazing to aluminium/steel/wooden frame with necessary fixing arrangements viz jointing cleats, glazing clips, rubber packing, screws etc or fixed with oil putty as required complete upto 4 storied (G+3) bldg not exc 0.5 sq. m in each pane.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apoerture 1.40mm and fixed with aluminium/wooden/steel beads complete.

S&F for window/ventilator section of frame size 72mmX55mm fixed to wall or concrete surface with MS hold fast (30mm x 5 mm ) 150 mm long made of galvanized steel powder coated and section of shutter 47mm x 20 mm, mullion section 72mm x 50 mm (base steel as per IS 513 'D' quality galvanized as per IS: 277 with zinc of 120 Gms/Sqm ) glazed or gauzed and wire gauze shutter (double door shutter) with total coated thickness of 0.60mm including powder coated grill/guard bars made of square bars 10mm dia at 150mm c/c horizontal spacing fixed in MS flat frame (30mm x 5 mm) fixed to windows frame with screws, including 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40mm aperture necessary fittings and all builders hardware such as handles, tower bolts and stays etc, type - 4000 series ref Drg No CEAF/STD-191/2014 SH 1/2 & 2/2 including taking down old window/ ventilator and making good all jambs with rendering cement ratio 1:3 complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc removing debries from sites to out of MoD land.

M&L for rendering 12 mm thick using polymer modified ready mix cement based mortar complying to IS: 1661-1972, IS: 2250 1965, IS: 2402-1963 applied in ratio 1:4 as per manufacturer's instruction of walls including finished even and fair surface complete all as specified and directed by Engr-in charge.

M&L for rendering 10 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces of walls including finishing surface even and smooth without using extra cement.

M&L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in coving in chajja / projection, coping, benching, bed block, window cills and angle grouting etc complete all as specified and as directed by Engr-in-charge.

M&L for rendering 10 mm thick in cement mortar 1:4 on concrete surface of ceiling including finishing surface even and smooth without using extra cement.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete.

M&L for preparation of newly plastered surfaces of walls and applying wall care putty 1mm thick (avg thickness) and applying two coats oil emulsion distemper white or coloured over a coat of wall primer complete.

M&L for preparation for newly plastered surface of ceiling and applying two coats of oil bound distemper white or coloured over a coat of wall primer complete

M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by removal of nails etc & applying wall care putty 1mm thick (avg thickness) and then applying two coats of oil bound distemper white or coloured by roller over a coat of wall primer complete.

M&L for complete removal of existing treatment from old decorated plastered surfaces of walls by removal of nails etc & applying wall care putty 1mm thick (avg thickness) and then applying two coats of exterior emulsion paint 100% acrilic of approved white or coloured over a coat of wall primer of same make complete.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling and filling cracks/hole by wall care putty as required and applying one coat oil emulsion distemper white or coloured omplete all as specified & directed by Engineer-in-Charge

M&L for preparation of old painted wood & wood based surface of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint.

M&L for preparation of old painted steel & steel based surface of any description no otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint .

M&L for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water etc and applying one coat of cement base paint complete.

S&F in repairs 110 mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete.

S&F in repair 100mm bore PVC(SWR) bends any radius with oval access door.

M&L for cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required exc half brick but n exc one brick wall complete.

Taking up or down 15 mm bore steel tubing & connections & refixing the same in new or old position (walls, ceiling, floors, etc.) including replacement of old un serviceable fittings such as socket, elbow, tee, union etc. complete.

Taking up or down 20 mm bore steel tubing & connections & refixing the same in new or old position (walls, ceiling, floors, etc.) including replacement of old un serviceable fittings such as socket, elbow, tee, union etc. complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cum in, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface.

M&L for mild steel work as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

S&F in repair galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.(Each line wire to be measured)

Demolition of brick work/ stone masonry built in cement or cement lime mortar including all quoins, arches, pillars etc of any description including removing the debris from site to outside MoD land.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.

S&F for mild steel work framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

S& F for MS sliding bolt 300 mm long complete fixing with welding or bolt as required complete.

M&L for preparation of newly steel and iron surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.

M&L in repair 18 to 20mm thick granite (of any type) work (table rubbed and polished, rounded and chamfered ) as in steps ,jambs ,pillars,window cills, cooking platforms and like in full length upto 2.5 mtrs laid over 15mm thick screed bed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite & making hole for gas pipe where required complete all as specified and as directed.

a.k constructions

VIJAY KUMAR GUPTA

M/S Davinder Kumar

ETERNITY PROJECT

JAIPAL AND BROTHERS