CERTAIN REPAIR TO ROOF PLASTER KOTA STONE FLOOR TILING SANITARY PLUMBING ITEMS ETC IN LINE AREA EAGLE ENCL EAGLE HOUSE EAGLE OFFRS MESS OF 510 ABW UNDER AGE BR II OF GE NORTH MEERUT CANTT

Amount

M&L for providing cement concrete 1:2:4 Type B 1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M&L precast RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in cover slab or similar works set & jointed in CM 1:4 complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

All as per Srl item No 03 here-in-before but except bricks

M&L for cutting chases, pinning in, in brick wall , making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

M&L for cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-I as required superciaficial area exc 150 Sqcm but n. exc 400 Sqcm complete all as specified and directed.

S&F factory made glazed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F plain framed, panelled shutter (two panel) factory made 35 mm thick of 2nd class HW with rail stile and lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), Kiln seasoned and chemically pressure treated, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down shutters of any description exc 1 but n exc 2 sqm each, including builders hard ware fittings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 178 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 180 of SSR Part-II complete all as specified and directed.

S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Supplied and fixed in repairs steel windows with pressed steel frame made out from 1.25 mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay , handles tower bolts lugs including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonry work complete all as specified and shown on drawings (Note : Disturbed surface of wall shall be made good to true surface)

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m with and including necessary joining aluminium cleats, aluminium glazing clips, ruber neoprene packing suitable size of aluminium, handles of size 150mm 2 Nos in each door, stainless steel hinges anodised aluminium snap beading for fixing glass panes / other filling material in panels, screws etc complete all as specified and directed. Note:- Glass panes / other filling materials in panels shall be measured and paid separately.

S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt having shoot / dia of bolt not less than 10mm complete all as specified and directed.

S&F 250 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F butt hinges of 100 mm size, Medium weight, cold rolled mild steel. complete all as specified and directed.

M&L for welding in repair n.exc 2.5cm in length of loose joints of sliding doors, hinges, sliding door bolts, garrage doors, windows, door, northlight framing, monkey proofing framing etc including at any height & inc necessary cutting grinding complete all as specified and directed

S&F 150mm size Mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F anodised aluminium frame for doors , windows, ventilators with one or more rebates with and including weight of joining cleat for fixing etc complete all as specified and directed

S&F 1.00 mm thick mild steel, plain, black sheet in hearths; covering to door shutters; covering to door chowkats (frames); etc cut to size edges beads, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seams including bending turning up mitred engles, stopped ends, outlets, etc. as required complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

S&F rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

Dismantling of structrual steel work of any description including doors, gates but excluding framed truss complete all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling suspension system of size of grid 605x605 mm complete all as specified and directed.

S&F valley gutter made out of 1.25mm thick PGI sheet, with grade of zinc coating 275 gm/ sqm (both sides) including GI through both sides of valley gutter and bottom provided with 150mm outlet projected up to 200 mm suitable to be couplied with GI rain water pipe and drilled for proper connection with trough, joints shall be welded by gas welded complete all as specified and directed . Note : Height of buildings under consideration is more than 10m having no staircase facility at site.

M&L for applying evenly a coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm on roof top including cleaning the surface & removing existing roof treatment if required & taking out vegitation and debris complete all as specified and directed

M&L for bitumastic gola, with 80/25 bitumenand coarse sand mixture 1:3 by weight 8cm x 8cm at the junction of roofing to vertical surfaces specified and directed

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions Note : Height of buildings under consideration can be more than 10m having no staircase facility at site.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions Note : Height of buildings under consideration is more than 10m having no staircase facility at site.

M&L (Except sheets) for refixing 6mm thick servicieable AC sheets using L or J type hooks, corrugated or semi-corrugated as in roofs, walls etc. Note : Height of buildings under consideration is more than 10m having no staircase facility at site.

S&F in repair plain FRP sheeting at north light curves, roofs, windows or at any other location by coach screw and washer, nut & bolt, staple pins or any other suitable means all as specified and decided by Engg-in-Charge. Note : To be fixed in patches as specified and directed by Engg-in-Charge and ht of bldg can be more than 10m

M&L in repairs for 19 mm thick particle board, medium density, flat pre-ssed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame as in shelves cup board cabinets, in palmet boxed or similar items open edge of board fixed with Ist class HW wooden beading fitted with nuts & bolts comlete in repairs complete all as specified and directed.

Supplied and fixed anodised aluminium window and ventilator shutter fixed type without sash bar aluminium section weighing 0.55 kg/RM with and including necessary jointing cleat aluminium glazing,clip, suitable size of aluminium handles, rubber packing, anodised aluminium snap beading,screws etc complete all as specified and directed.

Supplied and fixed fibre cement coloured textured designer ceiling board 4mm thick of size 595x595 mm conforming to IS : 14862 & IS : 2380 Part-XIV fixed to timber / GI / Aluminium frame work with screws/clips complete all as per manufactures instructions and as directed. Make : Everest, Charminar, UPAL.

M&L in repairs for 18-20 mm thick machine cut Kota stone slabs of size 540 mm x 540 to 560mmx 560mm in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the stone slabs, including necessary grinding rubbing rounding to exposed edges and polising in granite finish complete all as specified and directed. Note : Screed bed shall be measured and paid saperately under respective item

All as per Srl item No 42 here-in-before but on vertical surfaces such as skiring / dados

M&L for cutting , grinding, polishing to existing terrazzo or kota stone floor and skirting etc including pointing in white or coloured cement using pigment to achieve mirror finish complete all as specified and directed.

M&L in repairs for 18-20 mm thick machine cut perfect black granite stone slab on vertical surface, skirting / dado, cooking platform, jams, pillars and other similar works in CM 1:4, set and jointed in neat cement slurry and pointed in white / coloured cement (1:2) to match the colour / shade of tiles over CM screed (screed shall be measured and paid for separately under respective item), jointed complete all as specified and directed".

M & L for laying Non Skid ceramic tiles 7 to 8 mm thick, (square / rectangular) jointless area of each tile exc 0.06sqm but n.exc 0.11 sqm first quality coloured in floors etc, set and jointed in neat cement slurry and pointed in white / coloured cement to match the colour / shade of tiles over CM screed (screed shall be measured and paid for separately under respective item), jointed complete all as specified and directed".

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white / coloured cement to match the colour / shade of tiles over CM screed (screed shall be measured and paid for separately under respective item), jointed complete all as specified and directed".

M & L for light shade vitrified tiles 10mm thick (square / rectangular) area of each tile not exc 0.36 sqm first quality coloured in floors etc, set and jointed in neat cement slurry and pointed in white / coloured cement to match the colour / shade of tiles over CM screed (screed shall be measured and paid for separately under respective item), jointed complete all as specified and directed".

All as per Srl item No 48 here-in-before but on vertical surfaces such as skiring / dados

M&L for Glazed ceramic tiles coloured 450mmx 350mm X 7 / 350mm x 250mm x 7 mm thick first quality of grade B tiles on vertical surface such as skirting / dados etc set and jointed in neat cement slurry and pointed in white / coloured cement to match the colour / shade of tiles over CM screed (screed shall be measured and paid for separately under respective item), jointed complete all as specified and directed".

M&L for laying 100mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plaster 15mm thick in cement mortar 1:3 in chajjas / beam / ceiling etc with X PM if required to make up to original shape at any height complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling of brick or concrete surface, finished even & smooth W/O using extra cement all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 10mm thick in CM 1:4 for backing coat of tiles in vertical surfaces complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white lime washing on walls complete all as specified and direcrted.

M&L for three coats of white wash on newly plastered or unplastered surfaces of ceiling including preparation of surface complete all as specified and directed.

M&L for preparing of old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying one coat of white lime washing complete all as specified and directed

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of cement base paint including petty repair with wall care putty wherever required complete all as specified and directed

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of OBD including petty repair with wall care putty wherever required complete all as specified and directed

M&L for preparing of old decorated surfaces of walls (plastered or un plastered) including cornices etc and applying one coat of exterior emulsion (weather proofing) paint including petty repair with wall care putty wherever required complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from metal frames including punching or drilling out old glazed pins / spring clip and rubbish off the premises complete all as specified and directed.

Taking up or down GI water tubing 15mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

M&L in repairs for 1mm thick MS plain sheet for making modified lid of water tank and fixed with 04 nuts and bolts for water tanks for water capacity n.exc 750 ltr complete all as specified and directed

Dismantling of old water tank of capacity exc 250 ltr & n.exc 500 ltrs and Supplied, hoisted and fixed in position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Dismantling of old water tank of capacity exc 500 ltr & n.exc 1000 ltrs and Supplied, hoisted and fixed in position rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms Make - 'Prayag' / Polytuff complete all as specified and directed.

S&F in repairs bib tap, C P cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repairs pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs angular valve, 15mm bore dia, cast copper alloy, CP with long shank and cup screwed down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed in repairs gun metal globe valves, 15mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed in repairs gun metal globe or gate valves, 20mm bore dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supplied and fixed in repairs WHB mixer single lever without Popup waste system complete all as specified and directed. Make : Jaquar Cat Part No ARI 39001B

S&F in repairs CP wall mixer single lever concealed diverter for bath and shower system conform to samples kept in the office of AGE B/R-II complete all as specified and directed.

Supplied and fixed in repairs CP towel rail 600mm long conform to samples kept in the office of AGE B/R-II complete all as specified and directed.

S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe or brass ferrule of 15 mm bore and fixed (Minimum weight 90 gms complete all as specified and directed.

S&F in repairs stop valve of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed. (Minimum weight 15mm- 90gms/20mm-92gms) complete all as specified and directed.

S&F in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/ plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm complete all as specified and directed. complete all as specified and directed.

S&F in repairs PVC connections fiber reinforced suitable for hot water, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supplied and fixed in repairs Stainless steel grating doom 125 mm dia and waste hole (minimum weight 40 gms) complete all as specified and directed.

Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, fixed to walls complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint fixed to walls or laid in floors complete all as specified and directed.

Supplied and fixed 150mm bore dia UPVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall complete all as specified and directed.

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer cast copper alloy capastan head C.P brass pillar tap fency type 01 No, 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nuts complete all as specified & directed.

Supply and fixing in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

-----------------BLANK------------------

S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc with Plastic water closet seat cover of any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S&F in repairs viteress china wash down water closet pan (Padastal pattern) one piece wall mounted type (incl flushing cistern) inc connection to drain to outgoing pipe and to flushing pipe antisyphonage pipe etc & S&F plastic water closet seat cover closed pattern with flat bottom and MS chromium plated or aluminised hinging device complete all as specified and directed. Make : CERA Cat No S1013178 or equivalent in Jaquar

Supplied and fixed in repairs WHB ( size 550x460 ) type oval under /over counter shape in fixed on & including iron brackets & on stone slab including necessary cutting etc all as specified and directed Make -Cera cat part No S2030104

Supply and fixing in repair vitreous china urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and unionfor discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm lng brass screws, pointing around urinal back in cement; grating and Union for discharge pipe and waste pipe complete all as specified and directed.

Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs Plastic water closet seat cover of any colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated sheet of any description as in roof and including removal from the site complete all as specified and directed. Note : Height of buildings under consideration is more than 10m having no staircase facility at site.

Dismantling of wall or ceiling board (fiber, pulp, insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

Dismantling of snap grid for false ceiling of any description complete all as specified and directed

Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store complete all as specified and directed.

S&F in repairs 32mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

S&F in repairs 40mm dia PVC waste pipe for WHB 60cm long with union complete all as specified and directed.

S&F in repairs 8mm dia, brass chromium plated health faucet with 1 meter long flexible hose and wall hook complete all as specified and directed.

S&F in repair CP toilet paper holder conform to the sample kept in the office of AGE B/R-II complete all as specified and directed.

Tridev Construction Company

Manglam Engineers and Construction Co