SPECIAL REPAIRS TO BLDG NO P 152 AT MNS OFFRS MESS AT CHAFB UNDER GE (AF) BANGALORE

Amount

Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including taking out hold fasts and PCC bed block complete all as specified and directed.

Factory made solid PVC door frame (chowkhat) of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS wire tube supplied and fixed in opening as per specification and drawing complete all as specified and directed.

Factory made solid PVC Moulded Door shutter with particle board core,28 to 30mm thick (stiles), wtih 2,4,or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing and complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

S&F Pressed steel frames for doors size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

S&F Pressed steel frames for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as filled in pressed steel foor frames etc complete all as specified and as directed.

S&F mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc and other similar items conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed.

S&F 35mm thick IInd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gause etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels , commercial type on both sides, fixed to chowkhats complete all as specified and directed.

S&F for 100mm long butt hinges cold rolled mild steel medium weight. complete all as specified and directed.

S&F for 200mm long Aluminium, anodised, barrel tower bolts of extruded section. complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section. complete all as specified and directed.

S&F 150 mm longe extruded aluminium alloy handles, fabricated type., anodised. complete all as specified and directed.

S&F 200 mm long Extruded Aluminium alloy handles, fabricated type, anodised. complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and directed.

S&F mild steel box type hinges with self closing assemply, suitable for wooden glazed and skeleton factory made shutter fixed with necessary nut, bolt , washers and welding with pressed steel door frame complete all as specified and directed.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor. complete all as specified and directed.

M&L for IInd class hard wood plain, solid, straight chowkhats, and frame wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed.

M&L for 18 to 19mm thick pre-laminated partical board, interior grade, pre-laminated one side with decorative choice lamination & other side balancing white lamination, and fixed with screw and prepared kitchen cabinate and hanging on wall and also fixed to timber frame work where required. complete all as specified and directed.

Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails for 18 to 19mm thick complete all as specified and directed.

S&F 30 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised. complete all as specified and directed.

S&F 125mm long Hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws. complete all as specified and directed.

S&F in repair 20 mm dia curtain rods fancy type of aluminium annodised powder coated with fixing brackets (both sides), stops, rollers etc complete all as specifed and directed.

Taking down steel window/ventilator (without taking off shutter from the frame) n.exc. 2.00 sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors,windows & ventilators including providing and fixing hinges/ pivots and makingprovision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paidfor separately) with extruded built up standard tubular sections/ appropriate Z sections andother sections of approved make conforming toIS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessaryfilling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shallbe smooth, rust free, straight, mitred and jointed mechanically wherever required including cleatangle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws allcomplete as per architectural drawings and complete all as specified and directed.

S & F anodised aluminium (anodised transparent or dyed to requred shade according to IS 1826 with minimum anodic coating of grade AC 15 )of approved design design/pattern with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @ 200mm centre to centre including cutting the grill to prpper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.

S&F Powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat forfixing etc. complete all as specified and directed.

S&F powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws. complete all as specified and directed.

S&F for 4mm thick Sheet glass,ordinary qualityand glazingwith oil putty in square n exc 0.5sq. m in each pane complete all as specified and as directed.

S&F for 4mm thick frosted Sheet glass,ordinary quality and glazin gwith oil putty in square n exc 0.5sq. m in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement morter bedding but not backing coat removing serviceable tiles to store and rubbish off premises etc complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm light shed, in floors etc laid over and including 15mm thick screed bed or bedding layer of CM (1:4), set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed.

M&L for vitrified ceramic coloured tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over and including 10mm thick rendering in CM (1:3) on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade. complete all as specified and directed.

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm on vertical surfaces such as skirting with and including 10 mm thick backing coat of cement mortar 1:3 complete all as specified and directed.

M&L for Non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular), area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15 mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

Glazed ceramic tiles coloured of size 450X 300X 7mm thick as vertical sruface set and jointed in neat cement slurry and pointed in white or colour cement mixed with pigment to match the shade of the tiles complete all as specifiedc and as directed with 10 mm th rendering 1:3 for laying wall finishes complete all as specified and as directed.

M&L for 25 mm thick cement concrete type B0 1:2:4 using 12.5 mm graded stone aggregate as in levelling concrete finished even and fair to recive floor finshes,all as directed

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubing down with water etc complete all as specified and as directed

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC shall be measured and paid separetely)

Supply only water proofing compound complete all as specified and as directed.

M&L for rendering 5mm thick on concrete surfaces of ceiling in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Demiolition of concrete (unreinforced) of any description and in any position including existing treatment of sunken floor complete all as specified and directed.

M&L for PCC 1:5:10 Type E-2 (using 40mm graded aggregate) as in filling in sunken slab complete all as specified and directed.

M&L for providing water proofing treatment to sunken floor complete all as per following specification :- providing 15mm thick cement plaster in cement mortar 1:3 in mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement. complete all as specified and directed. Note : WPC shall measured and paid saperately

Application of two coats of pidifin 2k water proof coating i.e proof coat of Pidilite @ approx 1.00 Kg per sqm as per manufactures instructions. Note of item No 48 & 49 (i) The rate includes for preparation of surface treatment and sealing of all joints, cracks, corners and junction of pipes etc and ponding test complete all as specified and directed. (ii) PCC filling shall be measured and paid separately. (iii) Water testing of sunken floor shall be carried as per direction of GE & rates quoted by the tenderer shall be deemed inclusive of expdr incurred on testing.

Demolition of brick/PCC block work built in cement mortar incl. all quoins, arches pillars etc but excluding ashlar facings etc. complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 (1:3:6) set in cement mortar (1:6) complete all as specified and directed.

Demolition of cement concrete (unrienforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) as in sub base/ plinth protection complete all as specified and directed.

Demolition of cemet concrete padding or mud in roofs, any thickness, including plastering and leeping (whether full thickness removed oronly a part thereof) complete all as specified and directed.

M&L for providing, cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in roof kerbs, padding or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar 1:3 on roof padding finished even and fair with approved water proofing compound @ 200ml per 50kg of cement or as per manufacturer's instruction complete all as specified and directed. (Note : WPC shall be measured and paid separately as supply only under relevent item)

M&L for water proofing treatment on horizontal and vertical surfaces with Providing and laying / fixing TPO (Thermoplastic Polyolefin) membraneincl Cleaning the surface and laying of 200GSM Geo textile and cover up with TPO RF 1.2 mm thermoplastic membrane on roof & up to 300 mm of parapets and crumple joint including junction of roof and parapet, welding the seam joints with hot air gun/machine and terminate the corners with extra protection to bear the high wind pressure. The TPO should be thoughroly tightened with the lower structure using mechanical fastening properly to avoid the corners and seam joint failure. complete all as specified and directed. Make :Asian paints TPO or equivalent product of M/s Bauchemic/CIPY/SIKA/Pidilite/Dr fixit/Berger TO membrane

S&F in repair Vitreous China wash down water closet pan (Pedestal Pattern) white including P and S trap ,including white plastic seat cover with mild steel CP hinging device, flush pipe complete jointing, connecting and making good the disturbed surfaces. complete all as specified and directed.

S&F in repair Wash basin vitreous china white flat back of size 550x400mm including pillar taps 15mm dia fancy type, cast copper alloy, with capstan heads, chromium plated , 32mm brass chromium plated waste fittings, PVC waste pipe of suitable size, plug and porcelin stopper, CI brackets, cutting for and pinning in ends of brackets or erecting stand including taking down the old unserviceable one, complete all as specified and directed.

S&F in repair 15mm PVC connection 600mm long between ends with PTMT nut and washer complete all as specified and directed .

S&F in repair 15 mm bore Stop valves fancy type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specifed and directed.

S&F in repair 15 mm bore Stop valves, fancy type chromium plated with long shank and cup (concealed type), fixed, complete all as specified and directed. Make :Cera and equivalent makes of JOHNSON/ESS-ESS/ARK etc.

S&F in repair bib taps, fancy type with long neck chromium plated with crutch or butterfly hadle screwed down screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.

S&F CP two way bib cock with all accessories complet all specified and directed. Make :Cera and equivalent makes of JOHNSON/ESS-ESS/ARK etc.

S&F in repair Chromium plated brass 15 mm dia health faucet with 8 mm dia, 1.2 m long flexible tube with wall hook complete necessary fixing arrangements etc complete all as specified and directed. Make: Jaquar/Cera/Ess Ess or equivalent as approved.

S&F 7 to 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, fixed as in repairs, complete all as specified and directed .

S&F in repair CP shower rose with or without swivel joints 125 mm size including fixing to steel pipe or union 15 mm bore complete all as specified and directed.

S&F Stainless steel soap dish of approved make, complete all as specified and as directed.

S&F in repair Tubular towel rail, brass chromium plated 20mm dia, D type, 60 cm long between flanges, fixed to wall with chrome brackets complete all as specified and directed.

S&F Sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410mmx330mmx160mm, fixed as in repairs, complete all as specified and as directed.

S&F stainless steel plate rack of size 990.60mm x 914.40mm including fixing to wall complete all as specified and as directed.

S&F 100mm size brass mortice lock vetical type, 4 levers, including plates and two keys incl cutting holes into existing pressed steel frames complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm bore. complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15mm bore. complete all as specified and directed.

Taking down 25mm steel water tubing and connections, including cleaning for and refixing or removal to store. complete all as specified and directed.

S&F 15mm bore ‘Medim grade’ tubes,galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors. complete all as specified and directed.

S&F 20 mm bore steel water tubing medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors. complete all as specified and directed.

S&F 25 mm bore steel water tubing medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors. complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindrical or vertical with closed top) 500ltrs capacity hoisted and fixed in position including dismantling of existing water tank and disconnecting pipeline connection complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed. complete all as specified and directed.

S&F in repair Ball brass valves, 20mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Dismantling of PVC drain pipes of 75/100mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as specified and directed.

S&F 110mm PVC (SWR) pipes singlesocketed, in any lengthPVC (SWR) pipes singlewith rubber ring joints, fixed to walls. complete all as specified and directed.

S&F 75mm PVC (SWR) pipes singlesocketed, in any lengthPVC (SWR) pipes singlewith rubber ring joints, l fixed to walls. complete all as specified and directed.

S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints laid in floor. complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius. complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius. complete all as specified and directed.

S&F 110mm borePVC (SWR) junction single,(Single T) equal or unequal with access door. complete all as specified and directed.

S&F 75mm borePVC (SWR) junction single,(Single T) equal or unequal with access door. complete all as specified and directed.

S&F 110mm borePVC (SWR) vent cowl. complete all as specified and directed.

S&F PVC (SWR) 75mm dia multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed

S&F in repair PVC (SWR) floor trap 100/110mm dia, plain with grating including jointing with solvent cement. complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement. complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of oil emulsion distemper over one coat of chalk whiting primer over and including 3mm thick wall care putty complete all as specified and directed.

Complete removal of existing treatement on wall and applying two coats of oil emulsion distemper over one coat of chalk whiting primer over and including 3mm thick wall care putty complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new plasiered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of of cement based paint complete all as specified and directed.

M&L for preparation new wood or wood base surface and applying of Filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finishold of cabinets/book cases/ward robes of any description over 10 cm width or girth and applying one coats filler coat over a coat of pink primer. complete all as specified and directed.

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer. complete all as specified and directed.

Preparation of old existing wood or wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.

Preparation of old existing Steel surfaces over 10 CM width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.

Removing building materials etc (other than spoil payable under items 03028 to 03031) to a distance of 10 Km beyond the lead including in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. (Note : All debris shall be removed from MoD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Dismentling wrought iron or mild steel work of any description as in angle iron not otherwise provded for etc complete. complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any guage, thickness including roof covering etc. complete all as specified and directed.

Supply and fixed rolled mild steel in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc.grade Fe-410-W ( Gde-E-250) quality -A complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall in curved shape or any shape, fixed with self tapping screws complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement mortar complete all as specified and directed.

M & L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.

M & L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S & F non Skid (rough) endura High thickness tiles of 10-12 mm thick of approved size and shape and colour with minimum flexural strength of 38 N/mm2 including dismnantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing) and rubbish off the premisies complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. complete all as specified and directed.(Make: Johnson Endura/Somany Dura stone , Wavy Ivory & Wavy Terracotta)

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings & fixtures such as switches, ceiling rose, pendants, regulators, sockets, ceiling roses,pendants, regulators, light fittings etc and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, including metal flush box of 1.60 mm thick suitable for modular switches/ sockets/fan regulators including modular white cover plate and modular metal flush box with frame of required modules at site, blanking plates, brass screws, cup washers etc including all cutting / chases etc in stone/ brick masonary/ walls, pinning in stone walls / brick walls and pointing in cement mortar 1:3 to ends or edges of landing etc for concealed conduit wiring using heavy duty stone drilling/cutter machine and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- One light point controlled by one, one way switch 06 Amps

One ceiling fan point controlled by one, one way switch 06 Amps

One exhaust fan point controlled by one, one way switch 06 Amps

One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch

One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

One bell Point controlled by one push button 5 Amps switch on independent board

One light controlled by two nos, 2 way switch 5 amps, single pole

All as per item No 119 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. (Note for item No 119 to 126 :- Cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/ cutter machine and making good the disturbed surface shall be measured and paid separately under relevant item no 135)

S&F modular switch, 10 Amps, single pole, one way, 230 volts, one module complete all as specified and directed.

S&F modular switch, 10 Amps, single pole, two way, 230 volts, one module complete all as specified and directed.

S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete all as specified and directed.

S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified and directed.

S&F modular socket outlet 02 in 01, 03 pin, 16 Amps, 02 module with shutter complete all as specified and directed.

S&F modular Bell push 6 Amps, one module 240 volts complete all as specified and directed.

S&F Ding Dong Bell, AC, 230 volts, Single Pole incl connection complete all as specified and directed.

S&F ceiling rose, 65 x 50 mm surface type with 3 terminals incl connection complete all as specified and directed.

Cutting into or through the stone walls / brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/cutter machine and making good the disturbed surface complete all as specified and directed.

S&F on surface/wall mounted LED batten, robust extruded aluminium housing and intigrated electronic drive 20 watt, 4 feet, with accessories including connection with 2 core flexible copper conductor cable of suitable size from ceiling rose including taking down old light fitting any type complete all as specified & directed

S&F on surface/wall mounted LED batten, robust extruded aluminium housing and initigarated electronic drive 10 watt, 2 feet, with accessories including connection with 2 core flexible copper conductor cable of suitable size from ceiling rose including taking down old light fitting any type complete all as specified & directed

S&F energy saving security light fitting of 35/36 watts LED pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core including taking down old light fitting any type complete all as specified & directed

S&F GI Pipe 40 mm dia bend L shaped for fixing of building security lights, including properly grouting on wall / pole with required fixing arrangements such as bolts, nuts, screws, clamps etc complete all as specified and directed.

S&F ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts complete all as specified & directed

S&F ceiling fan complete with three blades,down rod, accessories 230 V, 1200 mm sweep, min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor incl connection including taking down old fan any sweep and depositing to MES store yard complete all as specified & directed

S&F exhaust fan 300 mm sweep heavy duty, steel body, AC, single phase 230 volts, 50 Hz, with blades, frame and louvers shutter with necessary hole drilling in wall and making good the disturbed surfaces incl connection including taking down old fan any sweep and depositing to MES store yard complete all as specified and directed

S&F water heater storage type (geyser), capacity 25 litres, 230 volt, AC, BEE 5 star rated, to be fixed on wall with suitable size of nut/ bolt / fasteners and washers incl making good the disturbed surfaces of wall incl necessary cold and hot water connection with 02 Nos heavy duty connection pipe of SS rope threaded type with brass unions at both ends, 45 cm long, 15mm bore complete including disconnection and taking down old geyser any capacity and depositing to MES store yard complete all as specified and directed (Make-Havells/Racold/CG)

M&L for sub main wiring with 2.5 Sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases, pinning etc in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all specified & directed (Note : One run of earth continuity conductor, one run of PVC Conduit concealed in wall and two run of copper conductor together taken as one length for measuring unit length)

All as here in above but for 02 x 6.0 Sqmm for phase & neutral and 01 x 6.0 Sqmm for continuous earth wire in 20 mm PVC conduit. complete all as specified and directed.

M&L for sub main wiring with 10 Sqmm nominal cross sectional area, four single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 10 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases, pinning etc in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and directed. (Note : One run of earth continuity conductor, one run of PVC conduit and four runs of copper conductor together taken as one length for measuring unit length) (Note for sl item No 144 to 146 :- Chasis/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concealed sub main wiring shall be measured and paid separately under relevant item no 147)

Cutting chasis, pinning in Stone walls/ brick walls etc. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc, for concealed conduit wiring a into or through the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling/cutter machine and making good the disturbed surface complete all as specified and directed.

S&F VTPN sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 08 ways with 200 Amps rated copper bus bar and metal double door, IP 43 protection, suitable for MCCB 4 pole 125 amps as incomer and MCB SPs/ SPN as outgoing along with cable end box for above DB and concealed flush in wall including all cutting chases / civil work as required incl connection and taking down old unsv DB complete all as specified & directed (Note : MCCB & MCB SPs/SPN will be measured and paid seperately)

S&F Sheet metal enclosure for DB's double door TPN, 6 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 415 V, concealed in walls complete Including taking down old unsv from exiting place complete all as specified and directed.

S&F sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and double door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting / civil wk etc in wall as required complete all as specified & directed

S&F MCB TPN 40 Amps, 415 V, C- series with breaking capacity of 10 KA complete all as specified and directed

S&F MCB SPN 40 amps, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete all as specified & directed

S&F MCB SP, AC, 240 volts of 06 to 32 Amps capacity "B" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed

S&F MCCB 125 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete all as specified & directed

S&F MS fabricated Sheet metal enclosure of suitable size as required at site, duly painted as directed, for accomadating of VTPN DBs, TPN DBs, energy meters with proper locking arrangements, flushed to wall incl necessary civil work complete all as specified and as directed

Supply and laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core, cable to be laid in ground / fixed on wall/floor with clamping arrangement complete all as specified & directed

S&F LED post top light, 40 watt, 230 volts, AC, outdoor type with decorative post top for 360 degree indirect light IP 65 protection, made from aluminium housing with impact and corrosion resistant with driver and lamp, fitting to be fittied & incl GI pipe of required length & size, fixed at gate/wall as directed incl connection complete all as specified and directed.

M&L for PVC cable loop box size not less than 200mm x 140mm x 95mm, outdoor type, duly fitted on wall/pole with suitable clamp, nuts, bolts & washerss incl to accommodate & incl one no of MCB SP 6 amp, 'B' series, suitable aluminium with bus bar of 3 phase porcelain insulated connectors incl suitable size of lugs & gland for Incoming and outgoing cables complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground ( earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, connected to galvanised earth lead wire 4.00 mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indiacted including testing on completion. complete all as specified and directed.

M&L for Earth Continuity Conductor or main earthing lead fixed to wall on batten or recess or chasis or buried in ground or drawn in conduit / pipe or fixed for earthing etc of size 4.00 mm dia galvanised iron or steel wire complete all as specified and directed.

M&L for GI tubing light grade 40mm bore with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size for protection of LT UG cable complete all as specified and directed.

S&F sheet metal enclosures with socket plug top and MCB, Single pole & neutral enclosure with a 2 pin & earth plug & socket complete with one single pole MCB 20 amps, 'C' curve incl connection complete all as specified & directed

S SELVALAKSHMI ENGINEER AND CONTRACTOR (BID ID -3455268)

kamadhenu Electricals (BID ID -3455823)

P Ramesh and Co (BID ID -3455877)

M/S Suresh Raju (BID ID -3456361)

PRACHANIVA CONSTRUCTIONS (BID ID -3455643)

Srisrinivasaenterprises (BID ID -3451936)

M/s GM Constructions (BID ID -3461296)

K. VENKATESH NAIDU (BID ID -3461571)