Karnataka

AOC

Works

Buildings

CONSTRUCTION OF CEN POLICE STATION AT YADGIR

Karnataka State Police Housing and Infrastructure Development Corporation Limited

KSPHIDCL Contracts Section Bengaluru | Bengaluru Urban, Karnataka

Amount: ₹97.8 LCloses: 26 Mar 2026Closed

Bids

1 Bid26 Mar 2026

#	Company	Amount	Status
1	₹1.0 Craccepted-aoc	₹1.0 Cr	accepted-aoc

Tender Value

₹97.8 L

EMD Value

₹2.0 L

Closing Date

26 Mar 2026, 11:00 pmClosed

Tender Inviting Organisation

Name

Karnataka State Police Housing and Infrastructure Development Corporation Limited

Work Description

CONSTRUCTION OF CEN POLICE STATION AT YADGIR

Tender Information

Tender ID

273301

Reference Number

KSPHIDCL/2025-26/BD/WORK_INDENT372

Tender Type

Open

Product Category

Buildings

Location

KSPHIDCL Contracts Section Bengaluru

Source Website

Subscribe to view

Documents Required

15 documents required · 15 mandatory

Technical Bid

RequiredKSPH & IDCL Registration Certificate

RequiredClass-III & above Civil registered contractor of State PWDs / Central/MES/Govt. Undertakings

RequiredIncome Tax returns & PAN

RequiredEPF Registration Certificate

RequiredWork Done Certificate - ITT 3.2 b Similar nature Work done certificate

RequiredLiquid assets and availability of credit facilities

RequiredTurnover Certificate - ITT 3.2 a

Required1.3.of Section-3 Qualification Information

Required1.4.of Section-3 Qualification Information

Required1.5.of Section-3 Qualification Information

RequiredGST Registration Certificate

RequiredExecuted minimum quantities of work - ITT 3.2 c

RequiredWork Done Certificate - ITT 3.2 d Electrical Work done certificate

RequiredWork Done Certificate - ITT 3.2 e Water supply /sanitary Work done certificate

RequiredNon Refundable Transaction fee of Rs.20,000/- in the form of DD in favour of KSPH & IDCL,Own Fund, Bengaluru

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidder shall pay Contract Management Module processing fees of 0.025% of the contract value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tender document is part and parcel of the agreement

The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any

The bidder shall study the Tender document Carefully and quote the rates

Drawings uploaded are only for Tender Purpose only

The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KSPH & IDCL have the right to deduct the work bills and remit the same to respective PF offices

The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time and if any variation occurs it shall be paid / refunded by / to the Corporation against documentary evidence

The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act

Remittance towards PF shall be commensurate with the labour component of the work involved

The Bidder shall remit PF of labourers to Bidders permanent PF code number only

The bidder should maintain register of labourers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved

The contractor shall obtain insurance coverage for all the workers deployed for this work

Corrigendum/modification/corrections, if any, will be published in the karnataka public procurement portal and www.ksphc.org web sites only

Tender amount of Rs.9781571.21 is inclusive of all applicable taxes, levies, duties and cess, Building Workers Welfare Cess etc., excluding GST

The rates quoted by the Contractor shall be deemed to be inclusive of all applicable taxes, levies, duties and cess, Building Workers Welfare Cess etc., excluding GST as applicable as per the latest Notifications of GoK and GoI prevailing as on the date of NIT. The Employer will perform such duties in regard to the deduction of such taxes at source as per applicable law. GST shall be paid to the tendered amount separately. The Contractor should submit the tax invoice along with RA Bills

The bidder should furnish the documents relating to registration of GST

The bidder should furnish the valid address, phone number & e mail ID

Tenders must be accompanied by Earnest Money Deposit (EMD) of Rs. 1,96,000/- (Rupees One Lakh Ninety Six Thousand only), which may be paid fully through Karnataka Public Procurement Portal or Out of total EMD amountRs.50,000/- (Rupees Fifty Thousand only) shall be paid online through Karnataka Public Procurement Portal using any of the following Payment Modes: Credit Card, Direct Debit, National Electronic Fund Transfer (NEFT), Over the Counter (OTC) and the balance amount of Rs. 1,46,000/- (Rupees One Lakh Forty Six Thousand only) in the form of Bank Guarantee (BG) only issued from Nationalized/Scheduled Commercial Banks in the Name of KSPH & IDCL (Own Fund), Bengaluru. The scan copy of the Bank Guarantee (BG) to be uploaded at the time of submission of bid documents and the original Bank Guarantee should be submitted to Office of the Executive Engineer (Contracts), KSPH & IDCL, No.59, Gen. K.S. Thimmayya Road, Bangalore 560025 On or before the Last date of receipt of tender and the non-compliance of the same leads to the rejection of the bid.

Bounded scanned hard copies are to be submitted duly marking the Page Nos. within 3 days after the last date of submission of the bid documents online to EE(Contracts), KSPH & IDCL, Bangalore

Further details of the work or any clarifications can be obtained from the office of the Executive Engineer(Contracts), KSPH & IDCL, Richmond Road, Bangalore 560025. Ph: 080-25584102 Extn - 130 / 114 / 117

The Bidder has to make payment of Rs. 20,000/- (Rupees Twenty Thousand Only) inclusive of GST as transaction Fee (Nonrefundable) in the form of DD payable to KSPH & IDCL (Own Fund), Bengaluru and the bidder has to upload the scanned copy of the DD in the Karnataka Public Procurement web portal towards transaction Fee. The original DD should be submitted to Office of the Executive Engineer (Contracts), KSPH & IDCL, No. 59, Richmond Road, Bangalore- 560 025 On or before the Last date of receipt of tender for verification and the non-compliance of the same leads to the rejection of the bid.

Technical Criteria

Past Experience

1.3 of Section-3 Qualification Information: Work performed as Prime Contractor (in the same name) on works of similar nature over during the five years (2020-21 to 2024-25)

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

1.4 of Section-3 : Quantities of work executed as prime contractor (in the same name) during the last five years (2020-21 to 2024-25)

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

3.2- To qualify for award of this contract, each Tender in his/her/their name should have in the last five years i.e. 2020-21 to 2024-25): (b) Satisfactorily completed as prime contractor (at least 90% of the contract value), at least one similar nature of work of value not less than Rs. 49.00 Lakhs

Others -- Work Done certificate issued not below the rank of an Executive Engineer or equivalent.

ITT - 3.2 d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totalling Rs.5.89 Lakhs in any one year

Others -- Workdone certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded

3.2 (e) The Tenderer or his identified subcontractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.3.95 Lakhs in any one year

Others -- Work done certificate issued not below the rank of an Executive Engineer. In case of Sub Contractor licence & Consent letter also to be uploaded

1.5 of Section-3 Qualification Information : Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender : (A) Existing commitments and ongoing works & (B) Works for which Tenders already submitted

Others -- The scanned original work experience certificate issued by not below the rank of Executive Engineer

1.7 of Section-3: Qualification Information: Reports on the financial standing of the tenderer, such as profit and Loss statements and auditors reports for the last five years. (2020-21 to 2024-25)

Others -- Profit & Loss Statement from Registered Chartered Accountant

Capabilities of Vendor

Be a Class-III & above Civil registered contractor of State PWDs / Central/MES/ Govt. Undertakings

Others -- Valid Registration Certificate issued by respective Depts

Be Registered with KSPH & IDCL

Others -- Valid Registration Certificate issued by KSPH&IDCL

Be Registered with GST

Others -- Valid Registration Certificate issued by Competent Authority

Income Tax returns & PAN

Others -- Income Tax returns and PAN certificates

Be Registered with EPF Authorities

Others -- EPF Registration Certificate

ITT 3.3 (c)- Each Tenderer should further demonstrate Liquid assets and /or availability of credit facilities of no less than Rs.29.50 Lakhs (Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc (Unconditional)

Others -- Others -- Letter of Credit Certificates from Nationalized / Scheduled banks for meeting the fund requirement

ITT 3.2 - To qualify for award of this contract, each Tenderer / company in his / its name should have in the last five years i.e. 2020-21 to 2024-25 (c) Executed in any one year the minimum quantities of work executed (Please refer Tender Document)

Others -- Certificate issued from not below the rank of an Executive Engineer or equivalent.

Financial Status

ITT 3.2 - To qualify for award of this contract, each Tenderer in his/her/their name should have in the last five years i.e. 2020-21 to 2024-25: (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.97.82 Lakhs

Others -- Attach Certificate from Registered Chartered Accountant with UDIN Number

Others

1.8 of Section-3 Qualification Information: Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are Proposed to be deployed on this contract, if awarded.

Others -- Organization Chart & Company Profile

Fee & Financial Details

Tender Fee Amount

₹2,450

EMD Fee Amount

₹2.0 L

Important Dates

Last Activity

26 Mar 2026

Published

11 Mar 2026

Bid Opening

30 Mar 2026

Download Ends

17 Mar 2026

BOQ Preview

•

CONSTRUCTION OF CEN POLICE STATION AT YADGIR

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Earth work excavation for Foundation by mechanical means In ordinary/soft rock without blasting upto 1.5 m depth

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Providing and laying 150 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for ...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and size granite me...

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

•

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200x10mm

•

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 150x10mm

•

Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm

•

Parlimentary Hinges(6"X5")

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...

•

Applying priming coat: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood including preparing the surface after thorougly cleaning oil, grease, dirt and f...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

•

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

•

Providing vitrified tiles [Approved make: Nitco/ Naveen/ Kajaria or equivalent] of 60x60 cms of approved make, shade and size for flooring laid on a bed of 12mm thick cement mortar 1:3 mix, flush ...

•

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural d...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Providing and fixing MS grill work for windows and ventilators weighing 45kg/sqm using MS flats,or MS square riods, or combination of MS flats and square rods as per approved design,drawing includin...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...

•

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (1 Liquid: 2 Powder), to the RCC surface like bathroom, toi...

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

•

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 150x10mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 150x10mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS hinges 125 mm

•

Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Door stopper 75mm

•

Providing vitrified tiles [Approved make: Nitco/ Naveen/ Kajaria or equivalent] of 60x60 cms of approved make, shade and size for flooring laid on a bed of 12mm thick cement mortar 1:3 mix, flush ...

•

Providing and fixing MS grill work for windows and ventilators weighing 21kg/sqm using MS flats,or MS square riods, or combination of MS flats and square rods as per approved design,drawing includin...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

ISO PROOF SEALER: Providing waterpro of treatment to roof slab using 2 coats of acrylic copolymer elastomeric ISOPROOF sealer & protector. The surface shall be applied with basecoat of crystallizatio...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...

•

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe ...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...

•

Providing and fixing Brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) :

•

50 mm nominal bore

•

Providing and fixing Butter fly valve of

•

approved quality :

•

50 mm nominal bore

•

Providing and fixing Brass Gate valve gate of

•

approved quality :

•

40 mm nominal bore

•

Providing and fixing Brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) :

•

32 mm nominal bore

•

Providing and fixing Float valve for Sump

•

Providing and fixing brass gate valve of approved quality :

•

20 mm nominal bore

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of sh...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and placing on terrace (at all floor levels), polyethylene water storage tanks IS:12701 marked, with manhole lid and suitable locking arrangements, making holes of suitable diameter for inl...

•

Providing and fixing Bib cock Two way with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length, 20 mm nominal bore

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

•

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete

•

Providing and constructing "WIRE CUT BRICK MACHINEHOLE

•

CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved q...

•

Providing and fixing on wall face unplasticized Rigid PVC Rain water pipes confirming to IS : 13592 Type A Including jointing with seal ring confirming to IS : 5382, Leaving 10mm gap for Thermal expan...

•

provding and fixing 2HP monoblock Motor with all accessories.. For three phase…Make : KIRILOSKAR

•

Providing and fixing Angle cock medium with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy

•

Providing and fixing Bidet spray made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class

•

Providing and fixing PTMT Waste Coupling for wash basin and sink, of

•

approved quality and colour.

•

Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including

•

P.V.C. waste fittings complete.

•

Semi rigid pipe

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of j...

•

Providing and fixing Pillar cock with high neck with 265mm Extended body made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium

•

Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class-Premium

•

Providing and fixing Toilet paper holder made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class

•

Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) 50 mm nominal bore/ Horizontal

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, col...

•

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)...

•

Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal parti tions by cutting a chase of appropriate width with ...

•

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having w...

•

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 g.

•

15 mm nominal bore, 80 mm long, weighing not less than 46 g

•

Note: Cost of De-watering upto 5 % of (A+B) may be added, where required as

•

sessment for dewatering shall be made as per site condition

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. Thegranite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...

•

Ready Mix Concrete (RMC) with Cement & Cementitious Materials.

•

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in al...

•

Foundation Upto Plinth (b) All other types at 3%

•

Earth and retaining structures @ 10%

•

RCC Roof Slab @ 50%

•

Supply and fixing of SFRC machinhole cover (Medium Duty) made as per IS to suit existing damaged machinhole cover after removing the debries from inside and outside the existing machinhole etc. with a...

•

Steel Almirah plain with shelves &Door 6.6 Feet with 20 Guage doors & 22 Guage body. Size : 198cm H x 915cm W x 48cm D (including leg of 15.24cm) , fitted with four fixed shelves making five compartme...

•

S Type continuous armrest chair: SEAT/BACK ASSEMBLY: The seat and back are made from well seasoned& polished wood. CANE FOR SEAT/BACK: Cane is made from mix of LDPE+HDPE MIX material. The caning used ...

•

Staff Table Size: 1365mm W X 680mm D X 750mm H the Table Top work surface to be manufactured using 25mm thick pre laminated particle board (PLPB). All work surface edges are to be duly sealed with 2mm...

•

Supplying and installing reputed brand 42inch LED TV with anMRoid support.

•

Arms Rack With Lock For weapons

•

Electrical - Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before c...

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

•

Supplying and Fixing Metal Fan Box with Round Hook.

•

Groove cutting in the wall Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick

•

with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing...

•

Groove cutting in the wall Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick

•

with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)

•

& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire ...

•

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)

•

& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire ...

•

Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral)

•

& 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire ...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required

•

nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required

•

nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required

•

nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required

•

nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required

•

nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6Amps one way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. and as per the directions of Engineer in charge of the work. ii) 6 Amps 3 w...

•

Supplying of ..20w...feet -Alu Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70%

•

lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz ...

•

Supplying capacitor type ceiling fan complete with down rod blades,

•

shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase

•

AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary ...

•

Supply of LED Streetlight 40 watt luminaire with pressure die cast aluminium housing

•

body for optimal thermal dissipation. Lamp compartment comprising of anti

•

glare clear diffuser with Injection mould...

•

Supplying and drawing PVC insulated gas injected physical foam jelly

•

flooded co-axial TV cable.RG-6

•

Supply of 2.5 Sq. mm three core power cable (Finolex/VGuard) to all the Cameras, Storage device, LED Monitors, LAN Switches etc from UPS Units and from main power source point to UPS units, including ...

•

Supplying & fixing miniature circuit breakers on existing MCB

•

distribution boards using necessary fixing materials and C Type

•

curve, indicator ON/OFF, energy cross-3 with Short circuit breaking

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying and fixing regular MCB distribution boards on wall/ood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 p...

•

Supplying and drawing UTP-CAT 6E LAN cable.

•

Supplying and laying of four core optical fibre cable

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager 6U with 450mm depth and as per the directions of Engineer in charge of the work.

•

Supplying & Fixing of switch mounting rack with power manager & Cable manager 12U with 450mm depth and as per the directions of Engineer in charge of the work

•

Supplying & fixing of Network Switches 16 port 10/100 Switch and as per the directions of Engineer in charge of the work

•

Supplying & fixing of Network Switches 10 port Managable Switch and as per the directions of Engineer in charge of the work

•

Supplying & fixing of 2 mtrs. Cat 6Patch Cable. 2 Mtr

•

Supplying & Fixing of Patch panel for Lan Cabling. 16 Port 10/100 Patch Panel

•

Supply of HDMI Cables 5 metres length for connecting Professional Display and the NVR including cost of all materials

•

Supply, Installation, Testing & Commissioning of EPABX System with In built 4 Port voice mail.No. of Extensions: 48,No. of Junctions: 8,No. of Expandable Ports: 128, Operator's Console: 01, Compatible...

•

Supplying and laying of 12 core single mode OFC cable.

•

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 50pair

•

Supplying and drawing PVC flexible one pair telephone unarmoured tinned copper cable. 5 pair

•

Supply, installation and commissioning of Telephone set.

•

Analog Telephone with Caller ID/Display/Programmable Keys/ Speaker Phone Euroset 2025 Euroset 2025C. for admin block.

•

Installation & Commissioning Charges. - for admin block.

•

Supplying & fixing of MDF Box - for admin block.

•

Supplying, erecting, testing & commissioning of ON-LINEUPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer allaccessoriescompleteandExcludingbatteries and wiring co...

•

Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 75/80 AH capacity

•

Supplying of ..2 TR Invertor type split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed inverter compressor with air cooled condenser, latest R4...

•

Installation charges for split type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C

•

Supplying and installation of insulated refrigerant copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit Leak testing oil and gas...

•

Extra for Fabrication supply and fixing of Stand fabricated using slotted angle /L angle of size 6mm x 50mm for mounting out door/indoor A.C. unit/ Batteries.

•

Supplying, erecting, testing and commissioning of voltage stabilizer suitable for 170 to 270 v input and load variation from no load to full load, with over load protection, spike suppression, operati...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers, ,as per directions of engi...

•

Supplying and running GI/Copper strips for grounding connections, using necessary fixing materials as required., ,as per directions of engineer incharge of the work. 25x3mm Copper strip

•

Supplying and running GI/Copper strips for grounding connections, using necessary fixing materials as required., ,as per directions of engineer incharge of the work, ,as per directions of engineer inc...

•

Supplying and running of GI strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip

•

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

•

Supplying ......... A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board 32-40 Amps 4 pole

•

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 150 sqmm Long Barrel

•

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +...

•

Labour charges for Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 sqmm to25 sqmm ---- As per directions o...

•

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (ordinary)

•

Supplying of Open well Mono sub pump set 3 HP 3 phase suitable for operation on 230 volts 2880 RPM Three phase AC supply Make- Using group "A" materials. as per the directions of engineer inchar...

•

Fixing charges of pumpset after aligning, leveling & assembling etc, inclusive of transportation charges to work spot as per the directions of engineer incharge of the work.

•

Supplying of 50 mm kirloskar / other approved make CI screwed foot valve. Make- Using group "A" materials. And as per the directions of engineer incharge of the work

•

Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...

•

Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor

•

Fixing a shunt capacitor of ... kVAR capacity with necessary clamps, bolts, and nuts on existing wooden or metal board including banking of more than one capacitor. Up to 5 KVAR as per the direction...

•

Supplying of TPST with rewirable porcelain channels in SM enclosure. Made out of 14 SWG powder coated paint of approved colour a) 32Amps as per the directions of the engineer in charge of the work...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. and as per the directions of Engineer in charge of the work.

•

Erection of panel and Meter Borad : Erection of combined panel borad and meter borad unit with necessary materials and labour charges Inculuding providing cement concrete foundation bed ect complete. ...

•

Erection, Electrification and commissioning Work of Pump Sets : eraction of pumpset including aligning and balancing with all necessary erection materials and labour including supply and erection of ...

•

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13:8130-1984 and vir...

•

KSRB13-3.1: Providing and fixing in trenches galvanised / mild steel tubes (medium grade) nominal bore with all fittings (earth work in trenches to be measured and paid for separately) including cost...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-3 Bid Doc CEN PS WI-372.pdf

Tender Document • 1.78 MB

Drawings.pdf

Others - Drawings • 15.98 MB

cen ps yadgir.pdf

Others - drawings • 0.60 MB

Make List Civil and Electrical.pdf

Others - Make List • 1.02 MB

Ready to Participate?

Download all tender documents and submit your bid