Work on the renewal of the metalled service road along the Lower Ganga Canal from km 0.577 to km 2.400.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (75mm thick) specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

providing and applying primer coat with bitumen emulsion (MS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per Technical specification clause 502.

Providing, laying and rolling of open-graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including Mixing all cost of material labour T&P etc. Complete. as per direction of engineer in charge.

providing and applying tack coat with bitumen VG-10 using bitumen at the rate of 0.35 kg/sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification clause 503.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510

Edging with 2nd class bricks, laid dry lengthwise, including excavation, refilling, consolidation, with a hand packing and spreading nearly surplus earth within a lead of 50 metres

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.