REPAIR/MAINT OF INTERNAL WIRING INCL UNSV FITTINGS/FIXTURES OF PRATAP LINE AND NIRMAN VIHAR OFFR AREA UNDER GE JAIPUR

Amount

M&L for earthing with galvanized steel earth plate electrode 600mmx 600mmx6mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with the top edge of the plate not less than 1.5m below normal ground level connected to galvanized earth lead wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No. 03 of SSR Part -I connected to earthing point and including 15mm bore light grade G.I. protection pipe (upto 7.5 mtr from edge of the pit), PCC pit in mix 1:3:6 type C1 with PCC 1:2:4 type B-1, 40mm thick cover, watering arrangement with funnel and wire mesh and 20mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earh work including testing on completion.

S&F MCB distribution board, powder coated, SPN , 240 volts, 12 ways,CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required . Make : Legrand Cat Ref No. 507612 or Schneider Cat No. A9HSND12 or Hager as approved.

S&F MCB distribution board TPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS:8623, degree of protection IP 43-IK09 with metal door, recess mounted , having insulated 100 amp tinned copper bus bar, earth bar, din bar, detachable gland plate, interconnection , earthing connection, blanking plates in unused spaces as required.Make - Legrand cat ref no 507670 Schneider cat ref No A9HTND04 or equivalent in Hager as approved.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x10Sqmm + 1x10 Sqmm earth wire in 20mm dia conduit.

S&F MCBs of 'C' series single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete. Make : Legrand Cat Ref No. 408587 to 408595 or equivalent in Schneider/Hager as approved.

All as per item No. 05 above but double pole 10 to 32 Amps. Make : Legrand Cat Ref No. 408631 to 408636 or equivalent in Schneider/Hager as approved.

S&F MCBs of 'C' series double pole 40 to 63 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete. Make : Legrand / Schneider/Hager as approved.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Four pole 40 to 63 amp.Make - Legrand cat ref no 408700 to 408702 or Schneider cat ref No A9N4P40C to A9N4P63C or equivalent in Hager as approved.

S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 125 lumen per watt and total power consumption not more than 16 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete. Make : Philips Cat Ref No. Endura Next Batten "BN 308C LED 20S -6500 L 60 PSU WH" or equivalent in CG/ Bajaj/Panasonic.

S&F energy efficient recessed mounted LED luminaire suitable for 2'x2' grid ceiling with flat diffuser and lumen output of 3300 lumens 36 Watts having constant current electronic driver duly connected with 0.5 Sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire. Make Philips cat No RC240B LED33S-6500 PSU OD WH or equivalent in Havells/CG as approved.

S&F LED fixture 10 watt having lumen output 100 lumens per watt including connection. Make : Philips Cat Ref No. BN 021 LED 10S-6500 PSU GR S1 or equivalent in CG/Panasonic/Havells as approved.

S&F LED fixture 10 watt having lumen output 115 lumens per watt including connection. Make : Philips Cat Ref No. BN 021 LED 10S-6500 PSU GR S1 or equivalent in CG/Panasonic/Havells as approved.

S&F LED bulk head fitting 9 watt IP 66 & IK 09 with pressure die cast aluminium housing & polycarbonate diffuser duly pre wired connection with 0.75 Sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per Philips Cat Ref No. WT 202W LED 6S PSU S2 PC or equivalent in Panasonic/Havells/CG as approved.

Supply and fixing in replacement 8 watts wall mounted LED decorative luminary with standard accessories and lamp inclduing fixing the same with existing wall. Make : Bajaj/Philips/Panasonic.

Supply and fix in replacement LED luminary 40 watts IP 66 5700K outdoor luminary with standard accessories and making connection with existing light point with 3 core 1.0 Sqmm PVC insulated multistranded copper conductor wire including fixing the same on existing Gi bracket complete. Make : Philips Cat No. BRP409 LED 040 CW HO MR FG S1 PSU GR or equivalent in Panasonic/Bajaj/CG.

Supply and fixing in replacement GI bracket made out of 32mm dia GI medium grade pipe of length 90 Cms long bend shape and size as per site requirement including 02 Nos of MS flat 40x5mm 200mm long bend to shape as required to fix the G bracket with existing wall using 04 Nos of MS fastener 10mmx100mm long with nut, bolts and washers complete.

Taking down MCB distribution boards with incoming and outgoing controls any make any capacity after disconnecting complete.

Taking down carefully sub main wiring with PVC casing capping/PVC surface conduit and making good disturbed surfaces complete.

S&F in repair recess mounted LED panel of size 220mmx220mm, 12 watts 1500 lumen output having luminous efficacy >85 lm/W, 6500K, 50Hz, p.f. >0.90, CRI80, THD <30%, 25000 burning hours including making connection. Make : Philips Cat Part No. SM 260C LD 12S-6500 PSU WH or equivalent in Havells/CG/Panasonic as approved.

Supply, installation, testing and commissioning of LT panel board fabricated out of 2mm thick stainless steel (SS 316) with copper bus bar 4 pole equal of capacity in colour code R, Y & B, 200 Amps 415 Volts indoor type wall mounted of size not less than 750mmx650mmx250mm, installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insualated stranded copper conductor cable of 1.0 Sqmm including LED indicator for R, Y & B and comprising of the following :- Incoming : One number MCCB 125 Amps 4 pole 16 KA 415 Volts, 70-100%, 50 Hz Make Legrand Cat No. 4200 16 or equivalent in Hager/Schneider. Outgoing : (a) Single phase tamper proof meter with optical port 10 to 60 Amps-04 Nos. Make : Secure Saral or equivalent in HPL/L&T. (b) MCB DP 40 Amps 'C' series 10 KA AC 240 volts-05 Nos.

Taking down carefully surface aluminum or copper point wiring with PVC casing capping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, scokets, fan regulators as required for one light point controlled by one switch including making good disturbed surface with mortar/colour complete.

All as per item No. 22 above but one fan point controlled by one switch.

All as per item No. 22 above but one light point controlled by two, two way switch.

All as per item No. 22 above but socket outlet 6 Amps controlled by one switch on the same board with other swithces.

All as per item No. 22 above but socket outlet 6 Amps controlled by one switch on independent board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 2.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3 mm thick phenoic laminated white sheet cover for mounting switches, sockets as required for one 16 Amps socket outlet point controlled by one switch on independent board including making good surface with mortar/colour complete.

All as per item No. 27 above but one bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 1.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16 mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0 mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets, fan regulators one light point controlled by one switch including making good surface with mortar/colour complete.

All as per item No. 29 above but one fan point controlled by one switch.

All as per item No. 29 above but one socket outlet 6 Amps controled by one switch on the same board with other switches.

All as per item No.29 above but one socket outlet 6 Amps controlled by one switch on independent board.

All as per item No. 29 above but one bell point controlled by one bell push.

M&L for point wiring with 1100 volts grade PVC insulatd FRLS multistranded copper conductor cable 2.5 Sqmm (Phase-Red, Neutral-Black) and earth continuity conductor 2.5 Sqmm (Green) drawn into and including PVC casing-capping not less than 32x16mm ISI marked ivory colour with all fittings/fixing accessories and unwelded sunken galvnised pressed steel terminal boxes of thickness not less than 1.0mm covered with 3mm thick phenlic laminated white sheet cover for mounting sheet cover for mounting switches, sockets for one 16 Amps socket outlet point controlled by one switch on independent board including making good surface with mortar/colour complete.

S&F angle holder, insulated polycarbonate body with back plate complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F switch piano flush button single pole one way 6 Amp complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in repair switch piano flush button single pole one way 6 Amp complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F switch piano flush button single pole one way 16 Amp complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in repair switch piano flush button single pole one way 16 Amp complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in repair flush type, 6 Amp, single pole, two way complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F flush type, 6 Amp, single pole, two way complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F bell push, flush type, 6 Amps 240 volts complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in repair bell push, flush type, 6 Amps 240 volts complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F door bell AC 240 volts, single pole complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in repair socket outlet, 2-in-1, 3 pin 6 & 16 Amps flush type compete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F socket outlet, 2-in-1, 3 pin 6 Amps flush type compete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in repair socket outlet, 2-in-1, 3 pin 6 Amps flush type compete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F MCB distribution board, powder coated, SPN , 240 volts, 8 ways,CRCA steel sheet, degree of protection IP 43 - IK 09, with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. Legrand Cat Ref No. 507611 or Schneider cat ref No A9HSND08 or Hager as approved.

S&F ceiling rose 3 plates polycarbonate body complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F in repair hum free electronic step fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete. Make : Anchor Penta PC/Havells Reo/SSK as approved.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x4Sqmm + 1x4.0 Sqmm earth wire in 20mm dia conduit.

All as per item No. 53 above but 2x6 Sqmm + 1x6 Sqmm earth in 20 mm dia conduit.

All as per item No. 53 above but 2x10 Sqmm + 1x10 Sqmm earth in 25mm dia conduit.

S&F rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces of 20mm dia.

S&F rigid non metallic PVC conduit medium grade ISI marked ivory colour along with accessories in recess including cutting the wall and making good disturbed surfaces of 25mm dia.

S&F in replacement hot water pipe duly insulated with glass wool and aluminium cladding 15mm bore.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall build on cement mortar 1:4 and 2 coats of white/colour washing to match the surface complete.

S&F LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2500 lumens at a minimum system efficacy of 113 lumen per watt and total power consumption not more than 22 watt including driver. It has a rated system life time of 25000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete. Make : Philips Cat Ref No. Smartbrite Extra Batten "BN 021 LED 25S -6500PSU GR S1" or equivalent in CG/ Bajaj/Panasonic.

S & F in repair MS box of size 100mmx100mmx50mm deep, fabricated out of 1.0mm thick MS sheet for mounting switches, sockets, fan regulators etc including cuttings chases in exisiting wall for recessing the same and fair finish the surface in CM 1:4 complete. Note : Laminated sheet and switches, sockets, fan regulaotrs, bell pushes shall be measured and pair for seperately under relevant items of BOQ.

S & F in repair MS box of size 175mmx100mmx50mm deep, fabricated out of 1.0mm thick MS sheet for mounting switches, sockets, fan regulators etc including cuttings chases in exisiting wall for recessing the same and fair finish the surface in CM 1:4 complete. Note : Laminated sheet and switches, sockets, fan regulaotrs, bell pushes shall be measured and pair for seperately under relevant items of BOQ.

S & F in repair MS box of size 200mmx150mmx50mm deep, fabricated out of 1.0mm thick MS sheet for mounting switches, sockets, fan regulators etc including cuttings chases in exisiting wall for recessing the same and fair finish the surface in CM 1:4 complete. Note : Laminated sheet and switches, sockets, fan regulaotrs, bell pushes shall be measured and pair for seperately under relevant items of BOQ.

S & F in repair MS box of size 250mmx150mmx50mm deep, fabricated out of 1.0mm thick MS sheet for mounting switches, sockets, fan regulators etc including cuttings chases in exisiting wall for recessing the same and fair finish the surface in CM 1:4 complete. Note : Laminated sheet and switches, sockets, fan regulaotrs, bell pushes shall be measured and pair for seperately under relevant items of BOQ.

S&F in renewal phenolic laminated white sheet cover 3.0mm thick, cut into required size suitable for fixing on existing boards/terminal boxes for mounting switches, sockets, regulators as required.

S&F in replacement LED fittings 35 watts having efficacy 100 lumen per watt, IP 65 with inbuilt surge protection AC 240 volts suitable to mount on existing 40mm dia GI bracket. Make : Philips Model No. BRP050 LED 036 CW R1 MF PC S1 PSU GR or equivalent in Havells/CG as approved.

Taking down carefully storage type water heater (geyser) any make and capacity from clamp/bolts including disconnecting water and electric connection and re fixing the same and connecting up after cleaning of geyser and repair complete. (Note - Repair work shall be measured separately).

Opening up geyser of capacity 25/50 litre, checking defect, taking out u/s parts and re-assembling after carrying out repair / renewal work including nuts / bolts / wahers / gaskets / fusible plug etc wherever required and minor items not included separately in schedule. (Note - U/s parts shall be measured separately under relevant item of schedule as supply only).

Checking defective existing installed geysers any type at any place in Jaipur cantonment upto 50 litre capacity and repairing the same including testing complete. (Defective item shall be measured and paid under under relevant item of schedule as supply only).

Supply only geyser apparatus plate (any make, any type) copper alloy chromium plated suitable for geysers 25/50 litre capacity including rubber gasket, nuts / bolts etc complete.

Supply only heating element 2.0 KW, 230 volts, ISI marked suitable for 50 litre capacity geysers of any type as required.

Suppply only thermostat ISI marked suitable for 25/50 litres geysers as required.

Supply only stainless steel inner tank suitable for 25 litre capacity geysers housing complete.

Suppply only stainless steel inner tank suitable for 50 litre capacity geysers housing complete.

Repair of inner copper tank of geysers 25/50 litre capacity with gas welding not exceeding 5 mm thick to make it leak proof complete.

Repair of apparatus plate of geysers 25/50 litre capacity by brazing not exceeding 5 mm thick complete.

Renewal of brass chromium plated, flexible pipe connection 15 mm bore 450 mm long heavy duty suitable for hot water supply with two numbers brass chromium plated nuts at end complete.

M&L for painting of geyser 25/50 litre with two coats of synthetic enameled white paint after removing old paint and preparation of surface and writing MES No (Letters height 10 cm) complete.

Renewal of PVC insulated over all PVC sheathed three core copper cable of size 1.0 sqmm complete.

Supply and fixing in replacement hot water tank made out of 2.5mm thick MS sheet duly welded with seamless welding, water leak proof with all accessories such as inlet water connection, outlet water connection, normal water connection, overflow water connection etc including fixing PUF insulation 32mm thick all as required.

Servicing of solar collector panel of capacity 100 ltrs, cleaning the entire panel thoroughly after opening it, minor repair like nuts, bolts, washer, clamps etc as required and testing.

Rewinding the motor of table / pedestal / cabin fan 400 mm of all types and make with super enameled copper wire of existing gauge and approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of ceiling fan 1200/1400 mm of any type and make with super enameled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of fresh air/exhaust fan 230/300 mm of any type and make with super enameled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Rewinding the motor of exhaust fan 375/450 mm of any type and make with super enameled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Opening ceiling fan of any make any sweep for overhauling, providing fresh clean lubricating oil / grease including minor repairs, renewal of split pins, re-assembling and testing for satisfactory operation complete. (Note - Any u/s parts as renewed shall be measured separately).

Rewinding the motor of wall mount air circulator fan of size 600 mm of any type and make with super enameled copper wire of existing gauge of approved quality including overhauling and minor repairs for satisfactory operation, testing for the original speed & consumption complete.

Renewal of ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete. Make - SKF (6201 to 6203) or equivalent in TATA as approved.

Renewal of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete. Make - Havells cat ref no. 2.5 mfd / 440V / PLWW / 25x45 or equivalent in Epcos / Usha as approved.

Renewal of AC film capacitor 4.0 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete. Make - Havells cat ref no. 4.0 mfd / 440V / PLWW / 28x52 or equivalent in Epcos / Usha as approved.

Renewal of self lubricating bush of gun metal of same type for ceiling fan / exhaust fan as required.

Renewal of shaft of approved quality for ceiling fan / exhaust fan any make any type & size as required.

M&L for painting of table / pedestal / cabin fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc and writing MES No with black paint as required.

M&L for painting of ceiling fan of any sweep and make with one or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade and polishing with rubbing compound and wax polish including cleaning of surface with detergent etc and writing MES No in a height of minimum 30 mm with black paint as required .

M&L for scraping completely fresh air / exhaust fan of any sweep and make and providing with two or more coats of spray painting with best quality enamel paint of required colour and approved brand to give an even shade over a coat of red oxide primer and polishing with rubbing compound and wax polish and writing MES No with approved colour paint as required.

Transportation of ceiling fan / exhaust fan from store to site or site to store as required.

Installing, testing and commissioning repaired ceiling fans at any location in cantonment Jaipur including connection complete.

Renewal of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required.

Renewal of PVC canopy suitable for ceiling fan of any size and make as required.

M&L for painting the MES number on ceiling fan / exhaust fan / table fan pedestal fan / cabin fan any size and make at site or in store as required in a letter height of 2.0 to 2.5 cm complete.

Renewal of down rod of ceiling fan made of GI pipe medium grade 15 mm bore including cutting, threading, painting etc as required.

Renewal of PVC insulated and sheathed flexible 3 core cable with copper conductor of size 0.5 sqmm complete.

Supply and fixing ceiling fan 1200mm sweep 50 Hz AC 230 votls, 5 star rated in white colour with fan motor, blade set, 0.45 mtr down rod, canopy set, rubber reel including 0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No. on fan body as required. Make : Havells Model No. ES-50 or equivalent in Orient/CG/Standard.

Schedule of Credit

M/S Sheeba Enterprises

UNIVERSAL INFRAPROJECT PVT LTD

MSR INFRATECH