REPAIRS AND POLISHING AND PAINTING TO WOODEN AND STEEL FURNITURE ITEMS AND REPAIR REPLACEMENT OF FOAM CUSHIONS OF SOFA SETS REVIEWING OF CHARPOY GI PIPE WITH NYLON NEWAR AND OTHER ITEMS OF PARENT SQNS AND ALLIED UNITS FOR POP OCT 2021 AT NDA KHADAKWA

Amount

Table Dressing Gents (DB-3980 FD-230,379) Dismantling/replacement of old U/s drawers of Table dressing gents and fixing of new drawers of pre-laminated particle board of 18mm type-II Grade-I duly fixed with 4mm thick TW beeding & beeding shall be French polished to required finish all as per drg and directed by Engineer-in-Charge.

Dismantling/replacement of old U/S box (size 900x300x150mm ) of Table dressing gents and fixing of new drawers of pre-laminated particle board of 18mm type-II Grade-I duly fixed with 4mm thick TW beeding & beeding shall be French polished to required finish complete all as per drg and directed by Engineer-in-Charge

Fixing/Fitting of loose/dismentaled table dressing gents to the wall with 3" & 1.5" Screw.directed by Engineer-in-Charge

Dismantling of old unserviceable knob of Table dressing gents of cadets room and replacing with the new Knob of approved quality as per sample kept in BSO yard and as aproved and complete all as directed (FD-230,379)

Table dining cadet Steel: (CWE/PNA/ 2001Sh 6/6) Replacement of damaged/torn out table top with 18mm thick pre laminated particle boards both side laminated exterior grade type-II grade-I duly fixed with 3mm thick PVC/wooden edging. Shade of board shall be approved by GE/Engineer-in-Charge for the following items :-

Ditto all as per item No. 5 above but table writing Cadet steel (Prelaminated board of rose wood shade with 3mm thick PVC Beeding alround). (CWE/PNA/ 396)

Repair/Welding of tables and show rack at broken locations and of dislocated parts of tubular steel sections at required places : Welding shall be max 1 inch. If more length reqd additional point to be considered.

Dismantling of unsv bend steel rod of shoe Rack steel cadet and replacement of 10mm square bar of approx. length 900mm duly welded in reqd places and applying one coat of red oxide & two coat of black SE paint complete all as directed by Engineer-in-charge

Sofa set 5 seater (FD-281/ FD-373/ FD-258) Replacement of existing tapestry and cushions of sofa set by replacing old u/s cushion with 40 density U-foam cushion 4" thick of Make sleepwell/century/Kurlon (size as per drg) including providing long cloth lining for cushion, covered with new tapestry cloth of first quality (as per sample available at BSO yard) of approved shade duly stiched in shape and provided with good quality nylon zip on one side for sofa set 5 seater for Set of 10 cushions.

Replacement of existing Tapestry covers of sofa set by replacing old u/s tapestry cloth with new first quality (as per sample available at BSO yard) tapestry cloth of approved shade including providing long cloth lining duly stiched to shape provided with good quality nylon zip on one side and fixing it on the existing cushions of sofa set 5 seater (Set of 10 covers). (FD-281/ FD-373)

Almirahs Large Steel Multipurpose and Almirahs Large Steel with Self/without Self (FD-114, 1033, 1031 1032, CWE/PNA/SK/ 3196) Replacement/repair of the following items in Almirah large steel with or without shelves Almirah medium and steel cupboard for cadet multipurpose:- Replacement of old unserviceable lock and providing & fixing new lock of good quality with double key of standard quality

Ditto all as per item No.11 above but Replacement of old broken handle and providing new MS CP handle of standard size 150mm of Godrej quality matching to Godrej model.

Ditto all as per item No.11 above but Replacement unsv hanging rod 20mm & CP-530mm long including painting as directed.

Ditto all as per item No. 11 above but Replacement of old broken hinges and providing new MS 75mm hinges duly welded including painting as directed.

Taking down old unserviceable locking device and S&F new device including MS Rod rest all as per drg.

Taking down old unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg including painting two coats of synthetic enamel paint over a coat of red oxide primer by spraying unit of colour as directed by Engineer-in-charge.

Ditto all as per item No.16 above but Replacement of unserviceable shelf clips as per sample existing.

ALMIRAH MEDIUM/SMALL STEEL WITH SHELVES Taking down old unserviceable handle and S & F CP handle 125 mm with nut and bolts as per drg.

Taking down old unserviceable locks and S&F locks 6 lever as per drg.

Taking down old unserviceable locking device and S&F new device including MS Rod rest all as per drg.

Adjustment of the existing shelves by providing new clamps removing unserviceable clamps all as directed.

Taking down old unserviceable hinges S&F new hinges of reqd size as per drg including painting as directed.

Taking down old unserviceable legs S&F new legs made out of 1 mm MS sheet as per drg & painting with two coats of synthetic enamel paint over a coat of red oxide primer by spraying unit of colour as directed by Engineer-in-charge.

Taking down old unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing & painting with two coats of synthetic enamel paint over a coat of red oxide primer by spraying unit of colour as directed by Engineer-in-charge.

Taking down old unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing & painting with two coats of synthetic enamel paint over a coat of red oxide primer by spraying unit of colour as directed by Engineer-in-charge.

Adjustment of exsisting shelves by providing new clamps after removing unserviceable clamps all as directed

Bed cadet steel (CWE/2000/1 Sheet 5/6 & 6/6):- Repair of bed cadet steel by welding at required places of dislocated parts as required.

Chari dining cadets steel, (CWE/2000/1Sheet 4/6) S & F in repair of old unserviceable Seat of chair dining cadet steel

S & F in repair of old unserviceable back of chair dining cadet steel (CWE/2000/1Sheet 4/6)

Repair of chair dining cadet steel (CWE/2000/1Sheet 4/6) :- by welding of dislocated parts of tubular steel sections at required palces

Replacement of old unserviceable seats of chair tubular steel with arm duly canned of make Godrej Make (CH-07/CHR-07/FD 75)

Charis tubular steel with arms (CH-07/CHR-07/FD 75) Replacement of old unserviceable back of chair tubular steel with arm duly canned of Make Godrej Make

Replacement of old unserviceable arm rest (plastic) of chair tubular steel with arm of Make Godrej (CH-07/ CHR-07/FD 75)

S & F Screw with plate washer for seat & back for chair writing for cadet of Godrej (CH-07 /FD 75) as per manufacturers description.

S & F male-female screw of arm rest chair writing cadet CHR-07 (As per sample)

Dismantling old unsv nut & bolt and replacing new nuts and bolts of chair easy cadet steel & Teapoy cadet steel complete all as directed by Engineer-in-charge. (Sketch 'Q' Godrej) & (Sketch 'R' Godrej)

M&L for preparation of old polished wooden surfaces by rubbing down to smooth with sand paper and after full removal of dust, pores/cracks if any, shall be filled with a filler made of a paste of whitening in methylated spirit and apply two coats polish with a pad of woolen cloth covered by a fine cloth on the surface in a series of overlappling circles, applying the polish sparingly but uniformly over the entire area to give an even surface having uniform texture and high gloss as directed by the Engineer-in-Charge for the following items:- Almirah medium wooden with shelves (inside & outside) (DB/3959).

Ditto all as per item No.37 above but Board notice. (CAD/FW-104, M/FW-5, CAD FW-22,F-78, CAD FW-15)

Ditto all as per item No.37 above but Chair Dining long back with velvet cloth. (Spl TP)

Ditto all as per item No.37 above but Chair Easy Aminity. (CAD/FW-4)

Ditto all as per item No.37 above but Counter cold stores. (CWE/Fur/ 16)

Ditto all as per item No.37 above but Glass show case 6’ Long x 2’6” wide x 4’6” High with green Baize

Ditto all as per item No.37 above but Hat Stand with mirror. (DB/3978)

Ditto all as per item No.37 above but Rostrum. (CWE/PNA/2001 Sheet 3, GE(K) F 122/85)

Ditto all as per item No.37 above but Show case double. (GE(K)-6/59)

Ditto all as per item No.37 above but Show case for single Museum. (GE(K)-9/54)

Ditto all as per item No.37 above but Show case for boat model. (NTS/FW of GE(K) 8/59)

Ditto all as per item No.37 above but Side board with Vitreous glass top (CM/FWR-2)

Ditto all as per item No.37 above but Show case for Museum. (GE(K) 9/54)

Ditto all as per item No.37 above but Teapoy wooden. (FD-232, 278, 382)

Ditto all as per item No.37 above but Table Centre. (FD-274)

Ditto all as per item No.37 above but Table Bed side. (DB/2343,DB/4043 FD/276)

Ditto all as per item No.37 above but Table for medals 4’x 3’x2’6”. (NTS/FW-3)

Ditto all as per item No.37 above but Table dressing gents with mirror. (FD/379/DB)

Ditto all as per item No.37 above but Table dining 6’1”x3’6”.(STAFW-16)

M&L for scraping of old polishe from Sofa set 5 Seater with scraping machiene after full removal of dust, pores/cracks if any, shall be filled with a filler made of a paste of whitening in methylated spirit and apply two coat of melamine with a pad of woolen cloth covered by a fine cloth on the surface in a series of overlappling circles, applying melamine uniformly over the entire area to give an even surface having uniform texture and high gloss as directed by the Engineer-in-Charge for Sofa set five seater FD 281

M&L for preparation of old polished wooden platform by rubbing down to smooth with sand paper and after full removal of dust, pores/cracks if any, shall be filled with a filler made of a paste of whitening in methylated spirit and apply two coat of melamine with a pad of woolen cloth covered by a fine cloth on the surface in a series of overlappling circles, applying melamine uniformly over the entire area to give an even surface having uniform texture and high gloss as directed by the Engineer-in-Charge for Platform teak wood 6'-6”x9’x9”(CAD/FW-34)

M&L for painting one coat of synthetic enamel paint on old steel/wooden surface duly preparing the surface after removing rust, dust etc. by sand paper etc & applting OG/smoke grey / PO red / signal red / black / Pale cream colour shade paint complete all as directed by Engineer-in-Charge for the following items:- Chair dining cadet steel (CWE/2000/1Sheet 4/6)

Ditto all as per item No 58 above but Rack steel 1830x 760x1905mm. (FD-126(M)

Ditto all as per item No 58 above but Table writing cadet steel 1170x600x760mm. (TP)

Ditto all as per item No 58 above but Table dining cadet steel. (CWE/2000/1 Sheet No 4/6)

Ditto all as per item No 58 above but shoe rack cadet steel. (CWE/2000/1 Sheet No 4/6)

Ditto all as per item No 58 above but Steel cupboard for multipurpose cadet (inside/outside). (CWE/PNA/ 396)

Ditto all as per item No 58 above but Steel stand for Coat Hanger for 16 hooks, 32 hooks, 28 hooks, 60 hooks. (CM/FW-5)

Ditto all as per item No 58 above but Rack iron for cycle:- (GE(K) F/88/97)10 Cycles

Ditto all as per item No 58 above but Rack iron for cycle:- (GE(K) F/88/97) 5 Cycles

Ditto all as per item No 58 above but Bed Cadet steel (Sketch-P (Godrej))

Ditto all as per item No 58 above but Chair Writing cadet of seat & back frames and handle (CHR-07)

Ditto all as per item No 58 above but Chair easy steel cadet. (Sketch-Q)

PAINTING :-Preparing old painted steel surfaces (internal & external) by sand paper, cleaning, including denting patches by filling putty (metal paste) and Spray painting one coat to a uniform finish with synthetic enamel paint complete, shade as directed by GE. Almirah Large steel

Ditto all as per item No. 70 above but Almirah medium steel

Ditto all as per item No. 70 above but Chair tubular steel ‘A’ type ( with arms ) or w/o Arms

Ditto all as per item No. 70 above but Table office officers steel

Ditto all as per item No. 70 above but Table dining OR's

Ditto all as per item No. 70 above but Table office clerk steel

Ditto all as per item No. 70 above but Table bed side steel Hospital.

Ditto all as per item No. 70 above but Chair easy steel

Ditto all as per item No. 70 above but Stool steel

Ditto all as per item No. 70 above but Table steel 900 x 900 x 760 mm

Ditto all as per item No. 70 above but Table steel w/drawer 900 x 600 x 760 mm

Ditto all as per item No. 70 above but Teapoy varandha

Ditto all as per item No. 70 above but Chair CBA Steel with arms and cushion

Ditto all as per item No. 70 above but Couch examination

Ditto all as per item No. 70 above but Rack adjustable steel 3 tier

Ditto all as per item No. 70 above but Rack adjustable steel 6 tier

Ditto all as per item No. 70 above but Rack side 3/4 spaces

Ditto all as per item No. 70 above but Ladder for loft

Ditto all as per item No. 70 above but Form With Back

Ditto all as per item No. 70 above but Form Without Back

Ditto all as per item No. 70 above but Trestle store room

CHAIR CB STEEL WITH ARMS Taking down old unserviceable seat and S & F new seat as required made of second class hard wood duly caned with half round 2 mm plastic cane and providing flat iron 25 x 3 mm stiffeners 4 Nos as per drawing.

Ditto all as per item No 91 above but back seat of chair.

Taking down old unserviceable hand rest and S & F new hand rest made of 2nd class hard wood duly polished in black colour as per drg.

Taking down old unserviceable PVC caps and S&F new caps as per drg.

Taking down old unserviceable shoe and S & F new PVC/hard rubber shoes as directed by Engr in Charge.

Taking down old unserviceable cushion of seat and S&F new cushion 32 density 50mm thick duly covered leatherite rexine as per existing shape and size all as directed by GE.

Taking down old unserviceable plywood from seat and S & F new 12mm thick BWR plywood for seat.

Taking down old unserviceable cushion of back and S&F new cushion 32 density 25mm thick duly covered leatherite rexine as per existing shape and size all as directed by GE.

Taking down old unserviceable plywood from back and S & F new 12mm thick BWR plywood for back.

BED HARD STEEL MAP Taking down carefully unserviceable plywood top OF Bed hard MAP S&F new plywood size 7'x4'x12 mm thick BWR confirming to IS: 303 as shown on drg.

Taking down carefully unserviceable prelaminated particle board teak face and S&F 18mm thick two side teak face Particle board ISI Marked of size 620 x 300 mm on both side of head board rest all as per drg.

ditto all as per item No 101 above but size 620 x240 mm for foot boards.

TABLE OFFICE CLERK STEEL Taking down old unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Adjustment of drawers where ever reqd as directed by Engr in Charge

Taking down old unserviceable locks of drawer and S&F locks of any type 5 lever as per drg.

Taking down old of unserviceable shoe and S & F new hard rubber shoes as per drawing

TABLE OFFICE OFFICER STEEL Taking down old unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Taking down old unserviceable locks of drawer and S&F locks of any type 5 lever as per drg.

Taking down old unserviceable shoe and S & F new hard rubber shoes as per drawing

TEAPOY VERANDAH Taking down old unserviceable legs and S&F new legs of existing shape and size as required duly welded to all the places as per drawing.

Taking down old unserviceable top and providing new top made of pre laminated Particle board 18/19 mm thick exterior grade including 6 mm thick teak wood beading all round all as per drawing.

REPAIR TO COUCH EXAMINATION:- Taking down old unservicebale foam cushion including rexine and S & F new cushion of size 1800 mm x 900 x 100 mm thick of 40 density. Make : Sleepwell / Kurl-on / Godrej duly covered with rexine and stiched smotthly compelete all as specified and directed by Engr-in-Charge.

REPAIRS TO TABLE DINING OR STEEL:- Taking down old unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing.

Taking down old unserviceable centre stiffener and S & F new centre stiffener of 1.6 mm thick compelete all as shown in drawing.

REPAIR TO TABLE STEEL 900 x600 x760 mm WITH / WITHOUT DRAWER :- Taking down old unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable locks and S & F new lock with duplicte key similar to existing lock all as specified and directed.

REPAIR TO TABLE BED SIDE STEEL:- Taking down old unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable hasp and stapple and S&F new cromium plated Hasp and stapple 100mm all as specified and directed.

Taking down old unserviceable hinges and S & F new hinges as per existing make of size 50mm all as specified and directed.

Taking down old unserviceable leg and S&F new leg made of MS pipe 25mm and 1.6mm thick all as specified and directed.

Taking down old knob and S&F new chromium palted knob 25mm dia 24mm length of best quality as approved.

REPAIR TO DESK (STEEL) Desk (Steel) : FD-107,1021 Dismantling of under mentioned parts of 1220 mm Desk (Steel) (FD-107,1021) and S&F Box of desk with 18/19mm thick prelaminated particle board type II grade I of approved shade duly fixed with 4mm thick TW edging wherever required and French polish to be done on wooden surfaces.as per Drg and as directed.

REPAIR TO TABLE COMPUTER Taking down old unserviceable top and S & F new top made out of 18/19 mm prelaminated Particle board exterior grade of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable key board tray and S & F new key board tray made out of 18/19 mm prelaminated Particle board exterior grade on telephoninc channel of shape and size with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable bottom shelf and S & F new bottom shelf made out of 18/19 mm prelaminated Particle board exterior grade with 4 mm thick teak wood beading all around as shown in drg.

Taking down old unserviceable drawer and S & F new drawer made out of 18/19 mm prelaminated Particle board exterior grade on telephoninc channel of shape and size with 4 mm thick teak wood beading all around as shown in drg.

REPAIR TO TROLLY HOT FOOD Removing of u/s heating element, u/s internal wiring,u/s pots, switch socket & u/s indicator etc and S & F new heating element, new internal wiring, new pots, new switch socket & new indicator compelete all as specified and directed

Removing of US caster wheel from trolly hot food and S & F new wheel as per existing size compelete all as specified and directed

Removing unserviceable hydraulic cylinder of (up down system) including lever and S&F new hadraulic cylinder of (up and down) including lever compelete all as specified and directed.

REPAIR TO SCREEN MOVEABLE:- Taking down old unserviceable cloth from screen moveable and S&F new cloth of approved quality in three pieces with spring compelete all as specified and directed

Taking down old unserviceable caster wheel and S&F new caster wheel of existing size compelete all as specified and directed

M&L for welding in repairs exc 2.5 but not exc 5cm length and thickness of metal to be welded not exc 6mm

CHARPOY G I PIPE WITH NYLON NEWAR : FD 220 Retaping the Charpoy G I Pipe with approved white newar tape nylon of size 50 to 55 mm (as per drawing) .

Ditto all as per Ser No. 136 above but S&F MS check nut as per drg

Ditto all as per Ser No. 136 above but S & F 3-way elbow as per drg

Ditto all as per Ser No. 136 above but S & F Long Rail as per drg

Madina Traders

M/s Green Leaf Electricals

Mahesh Traders