CA NO. GE (AF)/SGR-39/2026-27 PROVN OF CHAIN LINK FENCING / BARBED WIRE FENCING AT CERTAIN LOCATIONS UNDER GE (AF) SRINAGAR

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not etc. 50m and making good surface, work in any type of soil, complete all as specified and directed.

M&L for plain cement concrete, 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates), benching / copings and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E -165, complete all as specified and directed.

Supply only MS galvanised chain link fencing any size and dia of mesh, straining bolts, etc. including provision of binding wire & fixed to angle iron post, complete all as specified and directed.

Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc., complete all as specified and directed. Note: (i) Supply only fencing, will be measured and paid separately. (ii) Mild steel nut bolt, line wire and flat will be measured and paid separately.

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, as in repair etc. (each line of wire to be measured), complete all as specified and directed.

S&F MS round bars 10mm dia & over cut to length bent to shape required including cranking bending spirally for hoping for colm & backing ends and binding with and include MS wire (annealed) not less than 0.90 mm dia conforming to Fe-410 W (Gde E-250) quality-A, complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end screwed the other to be fitted with washers and one hexagonal or square nut length of bolt exc.5 cm but n exc 10 cm long & dia of neck 11 to 15mm, complete all as specified and as directed.

Preparation of new steel surface and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide primer, complete all as specified and directed.

Excavation over areas n.exc 1.5m deep and getting out in any type of soil, complete, all as specified and directed.